RMUL2025/lib/cmsis_svd/data/Atmel/AT91SAM9N12.svd

<?xml version="1.0" encoding="UTF-8"?>
<!-- ============================================================================ -->
<!--                  Atmel Microcontroller Software Support                      -->
<!--                       SAM Software Package License                           -->
<!-- ============================================================================ -->
<!-- Copyright (c) 2013, Atmel Corporation                                        -->
<!--                                                                              -->
<!-- All rights reserved.                                                         -->
<!--                                                                              -->
<!-- Redistribution and use in source and binary forms, with or without           -->
<!-- modification, are permitted provided that the following condition is met:    -->
<!--                                                                              -->
<!-- - Redistributions of source code must retain the above copyright notice,     -->
<!-- this list of conditions and the disclaimer below.                            -->
<!--                                                                              -->
<!-- Atmel's name may not be used to endorse or promote products derived from     -->
<!-- this software without specific prior written permission.                     -->
<!--                                                                              -->
<!-- DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   -->
<!-- IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   -->
<!-- DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      -->
<!-- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -->
<!-- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  -->
<!-- OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    -->
<!-- LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         -->
<!-- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, -->
<!-- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           -->
<!-- ============================================================================ -->
<device xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="1.1" xs:noNamespaceSchemaLocation="CMSIS-SVD_Schema_1_1.xsd">
  <vendor>Atmel</vendor>
  <name>AT91SAM9N12</name>
  <series>SAM9CN</series>
  <version>20130208</version>
  <description>Atmel AT91SAM9N12 device: ARM926EJ Embedded Microprocessor Unit, 400MHz, LCD, USB, LPDDR/DDR2/MLC NAND support, 217 Pins (refer to http://www.atmel.com/devices/SAM9N12.aspx for more)</description>
  <addressUnitBits>8</addressUnitBits>
  <width>32</width>
  <peripherals>
    <peripheral>
      <name>SPI0</name>
      <version>6088Q</version>
      <description>Serial Peripheral Interface 0</description>
      <groupName>SPI</groupName>
      <prependToName>SPI0_</prependToName>
      <baseAddress>0xF0000000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SPI0</name>
        <value>13</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SPIEN</name>
              <description>SPI Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SPIDIS</name>
              <description>SPI Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWRST</name>
              <description>SPI Software Reset</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LASTXFER</name>
              <description>Last Transfer</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MSTR</name>
              <description>Master/Slave Mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PS</name>
              <description>Peripheral Select</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PCSDEC</name>
              <description>Chip Select Decode</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODFDIS</name>
              <description>Mode Fault Detection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDRBT</name>
              <description>Wait Data Read Before Transfer</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LLB</name>
              <description>Local Loopback Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PCS</name>
              <description>Peripheral Chip Select</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLYBCS</name>
              <description>Delay Between Chip Selects</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RDR</name>
          <description>Receive Data Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RD</name>
              <description>Receive Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCS</name>
              <description>Peripheral Chip Select</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TDR</name>
          <description>Transmit Data Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TD</name>
              <description>Transmit Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCS</name>
              <description>Peripheral Chip Select</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LASTXFER</name>
              <description>Last Transfer</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x000000F0</resetValue>
          <fields>
            <field>
              <name>RDRF</name>
              <description>Receive Data Register Full</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TDRE</name>
              <description>Transmit Data Register Empty</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MODF</name>
              <description>Mode Fault Error</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRES</name>
              <description>Overrun Error Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NSSR</name>
              <description>NSS Rising</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmission Registers Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SPIENS</name>
              <description>SPI Enable Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RDRF</name>
              <description>Receive Data Register Full Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TDRE</name>
              <description>SPI Transmit Data Register Empty Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MODF</name>
              <description>Mode Fault Error Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRES</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NSSR</name>
              <description>NSS Rising Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmission Registers Empty Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RDRF</name>
              <description>Receive Data Register Full Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TDRE</name>
              <description>SPI Transmit Data Register Empty Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MODF</name>
              <description>Mode Fault Error Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRES</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NSSR</name>
              <description>NSS Rising Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmission Registers Empty Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RDRF</name>
              <description>Receive Data Register Full Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TDRE</name>
              <description>SPI Transmit Data Register Empty Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MODF</name>
              <description>Mode Fault Error Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRES</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NSSR</name>
              <description>NSS Rising Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmission Registers Empty Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>4</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-3</dimIndex>
          <name>CSR[%s]</name>
          <description>Chip Select Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>CPOL</name>
              <description>Clock Polarity</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCPHA</name>
              <description>Clock Phase</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSNAAT</name>
              <description>Chip Select Not Active After Transfer (Ignored if CSAAT = 1)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSAAT</name>
              <description>Chip Select Active After Transfer</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BITS</name>
              <description>Bits Per Transfer</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>8 bits for transfer</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>9_BIT</name>
                  <description>9 bits for transfer</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>10_BIT</name>
                  <description>10 bits for transfer</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>11_BIT</name>
                  <description>11 bits for transfer</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>12_BIT</name>
                  <description>12 bits for transfer</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>13_BIT</name>
                  <description>13 bits for transfer</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>14_BIT</name>
                  <description>14 bits for transfer</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>15_BIT</name>
                  <description>15 bits for transfer</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16_BIT</name>
                  <description>16 bits for transfer</description>
                  <value>0x8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SCBR</name>
              <description>Serial Clock Baud Rate</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLYBS</name>
              <description>Delay Before SPCK</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLYBCT</name>
              <description>Delay Between Consecutive Transfers</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protection Control Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SPIWPEN</name>
              <description>SPI Write Protection Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPIWPKEY</name>
              <description>SPI Write Protection Key Password</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protection Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SPIWPVS</name>
              <description>SPI Write Protection Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SPIWPVSRC</name>
              <description>SPI Write Protection Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SPI1</name>
      <version>6088Q</version>
      <description>Serial Peripheral Interface 1</description>
      <groupName>SPI</groupName>
      <prependToName>SPI1_</prependToName>
      <baseAddress>0xF0004000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SPI1</name>
        <value>14</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SPIEN</name>
              <description>SPI Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SPIDIS</name>
              <description>SPI Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWRST</name>
              <description>SPI Software Reset</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LASTXFER</name>
              <description>Last Transfer</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MSTR</name>
              <description>Master/Slave Mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PS</name>
              <description>Peripheral Select</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PCSDEC</name>
              <description>Chip Select Decode</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODFDIS</name>
              <description>Mode Fault Detection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDRBT</name>
              <description>Wait Data Read Before Transfer</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LLB</name>
              <description>Local Loopback Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PCS</name>
              <description>Peripheral Chip Select</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLYBCS</name>
              <description>Delay Between Chip Selects</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RDR</name>
          <description>Receive Data Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RD</name>
              <description>Receive Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCS</name>
              <description>Peripheral Chip Select</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TDR</name>
          <description>Transmit Data Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TD</name>
              <description>Transmit Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCS</name>
              <description>Peripheral Chip Select</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LASTXFER</name>
              <description>Last Transfer</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x000000F0</resetValue>
          <fields>
            <field>
              <name>RDRF</name>
              <description>Receive Data Register Full</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TDRE</name>
              <description>Transmit Data Register Empty</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MODF</name>
              <description>Mode Fault Error</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRES</name>
              <description>Overrun Error Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NSSR</name>
              <description>NSS Rising</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmission Registers Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SPIENS</name>
              <description>SPI Enable Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RDRF</name>
              <description>Receive Data Register Full Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TDRE</name>
              <description>SPI Transmit Data Register Empty Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MODF</name>
              <description>Mode Fault Error Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRES</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NSSR</name>
              <description>NSS Rising Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmission Registers Empty Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RDRF</name>
              <description>Receive Data Register Full Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TDRE</name>
              <description>SPI Transmit Data Register Empty Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MODF</name>
              <description>Mode Fault Error Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRES</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NSSR</name>
              <description>NSS Rising Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmission Registers Empty Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RDRF</name>
              <description>Receive Data Register Full Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TDRE</name>
              <description>SPI Transmit Data Register Empty Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MODF</name>
              <description>Mode Fault Error Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRES</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NSSR</name>
              <description>NSS Rising Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmission Registers Empty Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>4</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-3</dimIndex>
          <name>CSR[%s]</name>
          <description>Chip Select Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>CPOL</name>
              <description>Clock Polarity</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCPHA</name>
              <description>Clock Phase</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSNAAT</name>
              <description>Chip Select Not Active After Transfer (Ignored if CSAAT = 1)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSAAT</name>
              <description>Chip Select Active After Transfer</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BITS</name>
              <description>Bits Per Transfer</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>8 bits for transfer</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>9_BIT</name>
                  <description>9 bits for transfer</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>10_BIT</name>
                  <description>10 bits for transfer</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>11_BIT</name>
                  <description>11 bits for transfer</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>12_BIT</name>
                  <description>12 bits for transfer</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>13_BIT</name>
                  <description>13 bits for transfer</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>14_BIT</name>
                  <description>14 bits for transfer</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>15_BIT</name>
                  <description>15 bits for transfer</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16_BIT</name>
                  <description>16 bits for transfer</description>
                  <value>0x8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SCBR</name>
              <description>Serial Clock Baud Rate</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLYBS</name>
              <description>Delay Before SPCK</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLYBCT</name>
              <description>Delay Between Consecutive Transfers</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protection Control Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SPIWPEN</name>
              <description>SPI Write Protection Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPIWPKEY</name>
              <description>SPI Write Protection Key Password</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protection Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SPIWPVS</name>
              <description>SPI Write Protection Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SPIWPVSRC</name>
              <description>SPI Write Protection Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>HSMCI</name>
      <version>6449K</version>
      <description>High Speed MultiMedia Card Interface</description>
      <prependToName>HSMCI_</prependToName>
      <baseAddress>0xF0008000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>HSMCI</name>
        <value>12</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MCIEN</name>
              <description>Multi-Media Interface Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MCIDIS</name>
              <description>Multi-Media Interface Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PWSEN</name>
              <description>Power Save Mode Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PWSDIS</name>
              <description>Power Save Mode Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWRST</name>
              <description>Software Reset</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CLKDIV</name>
              <description>Clock Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PWSDIV</name>
              <description>Power Saving Divider</description>
              <bitOffset>8</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RDPROOF</name>
              <description>Read Proof Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WRPROOF</name>
              <description>Write Proof Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FBYTE</name>
              <description>Force Byte Transfer</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PADV</name>
              <description>Padding Value</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLKODD</name>
              <description>Clock divider is odd</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DTOR</name>
          <description>Data Timeout Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DTOCYC</name>
              <description>Data Timeout Cycle Number</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DTOMUL</name>
              <description>Data Timeout Multiplier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1</name>
                  <description>DTOCYC</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16</name>
                  <description>DTOCYC x 16</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>128</name>
                  <description>DTOCYC x 128</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256</name>
                  <description>DTOCYC x 256</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1024</name>
                  <description>DTOCYC x 1024</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4096</name>
                  <description>DTOCYC x 4096</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>65536</name>
                  <description>DTOCYC x 65536</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1048576</name>
                  <description>DTOCYC x 1048576</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SDCR</name>
          <description>SD/SDIO Card Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SDCSEL</name>
              <description>SDCard/SDIO Slot</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SLOTA</name>
                  <description>Slot A is selected.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SLOTB</name>
                  <description>-</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SLOTC</name>
                  <description>-</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SLOTD</name>
                  <description>-</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SDCBUS</name>
              <description>SDCard/SDIO Bus Width</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1</name>
                  <description>1 bit</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4</name>
                  <description>4 bit</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8</name>
                  <description>8 bit</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ARGR</name>
          <description>Argument Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ARG</name>
              <description>Command Argument</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMDR</name>
          <description>Command Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CMDNB</name>
              <description>Command Number</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSPTYP</name>
              <description>Response Type</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORESP</name>
                  <description>No response.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>48_BIT</name>
                  <description>48-bit response.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>136_BIT</name>
                  <description>136-bit response.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>R1B</name>
                  <description>R1b response type</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SPCMD</name>
              <description>Special Command</description>
              <bitOffset>8</bitOffset>
              <bitWidth>3</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>STD</name>
                  <description>Not a special CMD.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>INIT</name>
                  <description>Initialization CMD: 74 clock cycles for initialization sequence.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SYNC</name>
                  <description>Synchronized CMD: Wait for the end of the current data block transfer before sending the pending command.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CE_ATA</name>
                  <description>CE-ATA Completion Signal disable Command. The host cancels the ability for the device to return a command completion signal on the command line.</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IT_CMD</name>
                  <description>Interrupt command: Corresponds to the Interrupt Mode (CMD40).</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IT_RESP</name>
                  <description>Interrupt response: Corresponds to the Interrupt Mode (CMD40).</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BOR</name>
                  <description>Boot Operation Request. Start a boot operation mode, the host processor can read boot data from the MMC device directly.</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EBO</name>
                  <description>End Boot Operation. This command allows the host processor to terminate the boot operation mode.</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OPDCMD</name>
              <description>Open Drain Command</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PUSHPULL</name>
                  <description>Push pull command.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>OPENDRAIN</name>
                  <description>Open drain command.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MAXLAT</name>
              <description>Max Latency for Command to Response</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>5</name>
                  <description>5-cycle max latency.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>64</name>
                  <description>64-cycle max latency.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRCMD</name>
              <description>Transfer Command</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NO_DATA</name>
                  <description>No data transfer</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>START_DATA</name>
                  <description>Start data transfer</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>STOP_DATA</name>
                  <description>Stop data transfer</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRDIR</name>
              <description>Transfer Direction</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>WRITE</name>
                  <description>Write.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>READ</name>
                  <description>Read.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRTYP</name>
              <description>Transfer Type</description>
              <bitOffset>19</bitOffset>
              <bitWidth>3</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SINGLE</name>
                  <description>MMC/SD Card Single Block</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MULTIPLE</name>
                  <description>MMC/SD Card Multiple Block</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>STREAM</name>
                  <description>MMC Stream</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>SDIO Byte</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BLOCK</name>
                  <description>SDIO Block</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IOSPCMD</name>
              <description>SDIO Special Command</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>STD</name>
                  <description>Not an SDIO Special Command</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUSPEND</name>
                  <description>SDIO Suspend Command</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RESUME</name>
                  <description>SDIO Resume Command</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ATACS</name>
              <description>ATA with Command Completion Signal</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal operation mode.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>COMPLETION</name>
                  <description>This bit indicates that a completion signal is expected within a programmed amount of time (HSMCI_CSTOR).</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BOOT_ACK</name>
              <description>Boot Operation Acknowledge.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BLKR</name>
          <description>Block Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BCNT</name>
              <description>MMC/SDIO Block Count - SDIO Byte Count</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BLKLEN</name>
              <description>Data Block Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSTOR</name>
          <description>Completion Signal Timeout Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CSTOCYC</name>
              <description>Completion Signal Timeout Cycle Number</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CSTOMUL</name>
              <description>Completion Signal Timeout Multiplier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1</name>
                  <description>CSTOCYC x 1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16</name>
                  <description>CSTOCYC x 16</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>128</name>
                  <description>CSTOCYC x 128</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256</name>
                  <description>CSTOCYC x 256</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1024</name>
                  <description>CSTOCYC x 1024</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4096</name>
                  <description>CSTOCYC x 4096</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>65536</name>
                  <description>CSTOCYC x 65536</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1048576</name>
                  <description>CSTOCYC x 1048576</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <dim>4</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-3</dimIndex>
          <name>RSPR[%s]</name>
          <description>Response Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RSP</name>
              <description>Response</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RDR</name>
          <description>Receive Data Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DATA</name>
              <description>Data to Read</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TDR</name>
          <description>Transmit Data Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DATA</name>
              <description>Data to Write</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x0000C0E5</resetValue>
          <fields>
            <field>
              <name>CMDRDY</name>
              <description>Command Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BLKE</name>
              <description>Data Block Ended</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DTIP</name>
              <description>Data Transfer in Progress</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NOTBUSY</name>
              <description>HSMCI Not Busy</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SDIOIRQA</name>
              <description>SDIO Interrupt for Slot A</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SDIOWAIT</name>
              <description>SDIO Read Wait Operation Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CSRCV</name>
              <description>CE-ATA Completion Signal Received</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RINDE</name>
              <description>Response Index Error</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RDIRE</name>
              <description>Response Direction Error</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RCRCE</name>
              <description>Response CRC Error</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RENDE</name>
              <description>Response End Bit Error</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RTOE</name>
              <description>Response Time-out Error</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DCRCE</name>
              <description>Data CRC Error</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DTOE</name>
              <description>Data Time-out Error</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CSTOE</name>
              <description>Completion Signal Time-out Error</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BLKOVRE</name>
              <description>DMA Block Overrun Error</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMADONE</name>
              <description>DMA Transfer done</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FIFOEMPTY</name>
              <description>FIFO empty flag</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>XFRDONE</name>
              <description>Transfer Done flag</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ACKRCV</name>
              <description>Boot Operation Acknowledge Received</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ACKRCVE</name>
              <description>Boot Operation Acknowledge Error</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Underrun</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CMDRDY</name>
              <description>Command Ready Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BLKE</name>
              <description>Data Block Ended Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTIP</name>
              <description>Data Transfer in Progress Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NOTBUSY</name>
              <description>Data Not Busy Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SDIOIRQA</name>
              <description>SDIO Interrupt for Slot A Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SDIOWAIT</name>
              <description>SDIO Read Wait Operation Status Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CSRCV</name>
              <description>Completion Signal Received Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RINDE</name>
              <description>Response Index Error Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RDIRE</name>
              <description>Response Direction Error Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCRCE</name>
              <description>Response CRC Error Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RENDE</name>
              <description>Response End Bit Error Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTOE</name>
              <description>Response Time-out Error Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DCRCE</name>
              <description>Data CRC Error Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTOE</name>
              <description>Data Time-out Error Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CSTOE</name>
              <description>Completion Signal Timeout Error Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BLKOVRE</name>
              <description>DMA Block Overrun Error Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMADONE</name>
              <description>DMA Transfer completed Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FIFOEMPTY</name>
              <description>FIFO empty Interrupt enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>XFRDONE</name>
              <description>Transfer Done Interrupt enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ACKRCV</name>
              <description>Boot Acknowledge Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ACKRCVE</name>
              <description>Boot Acknowledge Error Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Underrun Interrupt Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CMDRDY</name>
              <description>Command Ready Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BLKE</name>
              <description>Data Block Ended Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTIP</name>
              <description>Data Transfer in Progress Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NOTBUSY</name>
              <description>Data Not Busy Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SDIOIRQA</name>
              <description>SDIO Interrupt for Slot A Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SDIOWAIT</name>
              <description>SDIO Read Wait Operation Status Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CSRCV</name>
              <description>Completion Signal received interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RINDE</name>
              <description>Response Index Error Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RDIRE</name>
              <description>Response Direction Error Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCRCE</name>
              <description>Response CRC Error Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RENDE</name>
              <description>Response End Bit Error Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTOE</name>
              <description>Response Time-out Error Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DCRCE</name>
              <description>Data CRC Error Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DTOE</name>
              <description>Data Time-out Error Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CSTOE</name>
              <description>Completion Signal Time out Error Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BLKOVRE</name>
              <description>DMA Block Overrun Error Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DMADONE</name>
              <description>DMA Transfer completed Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FIFOEMPTY</name>
              <description>FIFO empty Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>XFRDONE</name>
              <description>Transfer Done Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ACKRCV</name>
              <description>Boot Acknowledge Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ACKRCVE</name>
              <description>Boot Acknowledge Error Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Underrun Interrupt Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CMDRDY</name>
              <description>Command Ready Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BLKE</name>
              <description>Data Block Ended Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DTIP</name>
              <description>Data Transfer in Progress Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NOTBUSY</name>
              <description>Data Not Busy Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SDIOIRQA</name>
              <description>SDIO Interrupt for Slot A Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SDIOWAIT</name>
              <description>SDIO Read Wait Operation Status Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CSRCV</name>
              <description>Completion Signal Received Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RINDE</name>
              <description>Response Index Error Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RDIRE</name>
              <description>Response Direction Error Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RCRCE</name>
              <description>Response CRC Error Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RENDE</name>
              <description>Response End Bit Error Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RTOE</name>
              <description>Response Time-out Error Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DCRCE</name>
              <description>Data CRC Error Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DTOE</name>
              <description>Data Time-out Error Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CSTOE</name>
              <description>Completion Signal Time-out Error Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BLKOVRE</name>
              <description>DMA Block Overrun Error Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DMADONE</name>
              <description>DMA Transfer Completed Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FIFOEMPTY</name>
              <description>FIFO Empty Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>XFRDONE</name>
              <description>Transfer Done Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ACKRCV</name>
              <description>Boot Operation Acknowledge Received Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ACKRCVE</name>
              <description>Boot Operation Acknowledge Error Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Interrupt Mask</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Underrun Interrupt Mask</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DMA</name>
          <description>DMA Configuration Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>OFFSET</name>
              <description>DMA Write Buffer Offset</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKSIZE</name>
              <description>DMA Channel Read and Write Chunk Size</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DMAEN</name>
              <description>DMA Hardware Handshaking Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ROPT</name>
              <description>Read Optimization with padding</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG</name>
          <description>Configuration Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FIFOMODE</name>
              <description>HSMCI Internal FIFO control mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FERRCTRL</name>
              <description>Flow Error flag reset control mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HSMODE</name>
              <description>High Speed Mode</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LSYNC</name>
              <description>Synchronize on the last block</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protection Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>WP_EN</name>
              <description>Write Protection Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WP_KEY</name>
              <description>Write Protection Key password</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protection Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>WP_VS</name>
              <description>Write Protection Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>No Write Protection Violation occurred since the last read of this register (WP_SR)</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WRITE</name>
                  <description>Write Protection detected unauthorized attempt to write a control register had occurred (since the last read.)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RESET</name>
                  <description>Software reset had been performed while Write Protection was enabled (since the last read).</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BOTH</name>
                  <description>Both Write Protection violation and software reset with Write Protection enabled have occurred since the last read.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WP_VSRC</name>
              <description>Write Protection Violation SouRCe</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>256</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-255</dimIndex>
          <name>FIFO[%s]</name>
          <description>FIFO Memory Aperture0</description>
          <addressOffset>0x00000200</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>DATA</name>
              <description>Data to Read or Data to Write</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SSC</name>
      <version>6078L</version>
      <description>Synchronous Serial Controller</description>
      <prependToName>SSC_</prependToName>
      <baseAddress>0xF0010000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SSC</name>
        <value>28</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXEN</name>
              <description>Receive Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receive Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmit Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmit Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWRST</name>
              <description>Software Reset</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR</name>
          <description>Clock Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIV</name>
              <description>Clock Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RCMR</name>
          <description>Receive Clock Mode Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CKS</name>
              <description>Receive Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Divided Clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TK</name>
                  <description>TK Clock signal</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RK</name>
                  <description>RK pin</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CKO</name>
              <description>Receive Clock Output Mode Selection</description>
              <bitOffset>2</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None, RK pin is an input</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CONTINUOUS</name>
                  <description>Continuous Receive Clock, RK pin is an output</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TRANSFER</name>
                  <description>Receive Clock only during data transfers, RK pin is an output</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CKI</name>
              <description>Receive Clock Inversion</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CKG</name>
              <description>Receive Clock Gating Selection</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTINUOUS</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN_RF_LOW</name>
                  <description>Receive Clock enabled only if RF Pin is Low</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN_RF_HIGH</name>
                  <description>Receive Clock enabled only if RF Pin is High</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>START</name>
              <description>Receive Start Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTINUOUS</name>
                  <description>Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TRANSMIT</name>
                  <description>Transmit start</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_LOW</name>
                  <description>Detection of a low level on RF signal</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_HIGH</name>
                  <description>Detection of a high level on RF signal</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_FALLING</name>
                  <description>Detection of a falling edge on RF signal</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_RISING</name>
                  <description>Detection of a rising edge on RF signal</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_LEVEL</name>
                  <description>Detection of any level change on RF signal</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RF_EDGE</name>
                  <description>Detection of any edge on RF signal</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CMP_0</name>
                  <description>Compare 0</description>
                  <value>0x8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOP</name>
              <description>Receive Stop Selection</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>STTDLY</name>
              <description>Receive Start Delay</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PERIOD</name>
              <description>Receive Period Divider Selection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RFMR</name>
          <description>Receive Frame Mode Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DATLEN</name>
              <description>Data Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LOOP</name>
              <description>Loop Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MSBF</name>
              <description>Most Significant Bit First</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DATNB</name>
              <description>Data Number per Frame</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSLEN</name>
              <description>Receive Frame Sync Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSOS</name>
              <description>Receive Frame Sync Output Selection</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None, RF pin is an input</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NEGATIVE</name>
                  <description>Negative Pulse, RF pin is an output</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>POSITIVE</name>
                  <description>Positive Pulse, RF pin is an output</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW</name>
                  <description>Driven Low during data transfer, RF pin is an output</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HIGH</name>
                  <description>Driven High during data transfer, RF pin is an output</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLING</name>
                  <description>Toggling at each start of data transfer, RF pin is an output</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FSEDGE</name>
              <description>Frame Sync Edge Detection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>POSITIVE</name>
                  <description>Positive Edge Detection</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NEGATIVE</name>
                  <description>Negative Edge Detection</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FSLEN_EXT</name>
              <description>FSLEN Field Extension</description>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TCMR</name>
          <description>Transmit Clock Mode Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CKS</name>
              <description>Transmit Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Divided Clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RK</name>
                  <description>RK Clock signal</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TK</name>
                  <description>TK pin</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CKO</name>
              <description>Transmit Clock Output Mode Selection</description>
              <bitOffset>2</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None, TK pin is an input</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CONTINUOUS</name>
                  <description>Continuous Transmit Clock, TK pin is an output</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TRANSFER</name>
                  <description>Transmit Clock only during data transfers, TK pin is an output</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CKI</name>
              <description>Transmit Clock Inversion</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CKG</name>
              <description>Transmit Clock Gating Selection</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTINUOUS</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN_TF_LOW</name>
                  <description>Transmit Clock enabled only if TF pin is Low</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EN_TF_HIGH</name>
                  <description>Transmit Clock enabled only if TF pin is High</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>START</name>
              <description>Transmit Start Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTINUOUS</name>
                  <description>Continuous, as soon as a word is written in the SSC_THR Register (if Transmit is enabled), and immediately after the end of transfer of the previous data.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RECEIVE</name>
                  <description>Receive start</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TF_LOW</name>
                  <description>Detection of a low level on TF signal</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TF_HIGH</name>
                  <description>Detection of a high level on TF signal</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TF_FALLING</name>
                  <description>Detection of a falling edge on TF signal</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TF_RISING</name>
                  <description>Detection of a rising edge on TF signal</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TF_LEVEL</name>
                  <description>Detection of any level change on TF signal</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TF_EDGE</name>
                  <description>Detection of any edge on TF signal</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STTDLY</name>
              <description>Transmit Start Delay</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PERIOD</name>
              <description>Transmit Period Divider Selection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TFMR</name>
          <description>Transmit Frame Mode Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DATLEN</name>
              <description>Data Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DATDEF</name>
              <description>Data Default Value</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MSBF</name>
              <description>Most Significant Bit First</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DATNB</name>
              <description>Data Number per frame</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSLEN</name>
              <description>Transmit Frame Sync Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSOS</name>
              <description>Transmit Frame Sync Output Selection</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None, TF pin is an input</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NEGATIVE</name>
                  <description>Negative Pulse, TF pin is an output</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>POSITIVE</name>
                  <description>Positive Pulse,TF pin is an output</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOW</name>
                  <description>TF pin Driven Low during data transfer</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HIGH</name>
                  <description>TF pin Driven High during data transfer</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLING</name>
                  <description>TF pin Toggles at each start of data transfer</description>
                  <value>0x5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FSDEN</name>
              <description>Frame Sync Data Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSEDGE</name>
              <description>Frame Sync Edge Detection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>POSITIVE</name>
                  <description>Positive Edge Detection</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NEGATIVE</name>
                  <description>Negative Edge Detection</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FSLEN_EXT</name>
              <description>FSLEN Field Extension</description>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receive Holding Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RDAT</name>
              <description>Receive Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmit Holding Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TDAT</name>
              <description>Transmit Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RSHR</name>
          <description>Receive Sync. Holding Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RSDAT</name>
              <description>Receive Synchronization Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TSHR</name>
          <description>Transmit Sync. Holding Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TSDAT</name>
              <description>Transmit Synchronization Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC0R</name>
          <description>Receive Compare 0 Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CP0</name>
              <description>Receive Compare Data 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC1R</name>
          <description>Receive Compare 1 Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CP1</name>
              <description>Receive Compare Data 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x000000CC</resetValue>
          <fields>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmit Empty</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Ready</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRUN</name>
              <description>Receive Overrun</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CP0</name>
              <description>Compare 0</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CP1</name>
              <description>Compare 1</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXSYN</name>
              <description>Transmit Sync</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSYN</name>
              <description>Receive Sync</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmit Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receive Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmit Empty Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Ready Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRUN</name>
              <description>Receive Overrun Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CP0</name>
              <description>Compare 0 Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CP1</name>
              <description>Compare 1 Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSYN</name>
              <description>Tx Sync Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSYN</name>
              <description>Rx Sync Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmit Empty Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Ready Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRUN</name>
              <description>Receive Overrun Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CP0</name>
              <description>Compare 0 Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CP1</name>
              <description>Compare 1 Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSYN</name>
              <description>Tx Sync Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSYN</name>
              <description>Rx Sync Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXRDY</name>
              <description>Transmit Ready Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmit Empty Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Ready Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRUN</name>
              <description>Receive Overrun Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CP0</name>
              <description>Compare 0 Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CP1</name>
              <description>Compare 1 Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXSYN</name>
              <description>Tx Sync Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSYN</name>
              <description>Rx Sync Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TC0</name>
      <version>6082O</version>
      <description>Timer Counter 0</description>
      <groupName>TC</groupName>
      <prependToName>TC0_</prependToName>
      <baseAddress>0xF8008000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>TC0</name>
        <value>17</value>
      </interrupt>
      <registers>
        <register>
          <name>CCR0</name>
          <description>Channel Control Register (channel = 0)</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR0</name>
          <description>Channel Mode Register (channel = 0)</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR0_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 0)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RAB0</name>
          <description>Register AB (channel = 0)</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RAB</name>
              <description>Register A or Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV0</name>
          <description>Counter Value (channel = 0)</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA0</name>
          <description>Register A (channel = 0)</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB0</name>
          <description>Register B (channel = 0)</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC0</name>
          <description>Register C (channel = 0)</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR0</name>
          <description>Status Register (channel = 0)</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER0</name>
          <description>Interrupt Enable Register (channel = 0)</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR0</name>
          <description>Interrupt Disable Register (channel = 0)</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR0</name>
          <description>Interrupt Mask Register (channel = 0)</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCR1</name>
          <description>Channel Control Register (channel = 1)</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR1</name>
          <description>Channel Mode Register (channel = 1)</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR1_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 1)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RAB1</name>
          <description>Register AB (channel = 1)</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RAB</name>
              <description>Register A or Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV1</name>
          <description>Counter Value (channel = 1)</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA1</name>
          <description>Register A (channel = 1)</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB1</name>
          <description>Register B (channel = 1)</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC1</name>
          <description>Register C (channel = 1)</description>
          <addressOffset>0x0000005C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR1</name>
          <description>Status Register (channel = 1)</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER1</name>
          <description>Interrupt Enable Register (channel = 1)</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR1</name>
          <description>Interrupt Disable Register (channel = 1)</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR1</name>
          <description>Interrupt Mask Register (channel = 1)</description>
          <addressOffset>0x0000006C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCR2</name>
          <description>Channel Control Register (channel = 2)</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR2</name>
          <description>Channel Mode Register (channel = 2)</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR2_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 2)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RAB2</name>
          <description>Register AB (channel = 2)</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RAB</name>
              <description>Register A or Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV2</name>
          <description>Counter Value (channel = 2)</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA2</name>
          <description>Register A (channel = 2)</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB2</name>
          <description>Register B (channel = 2)</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC2</name>
          <description>Register C (channel = 2)</description>
          <addressOffset>0x0000009C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR2</name>
          <description>Status Register (channel = 2)</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER2</name>
          <description>Interrupt Enable Register (channel = 2)</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR2</name>
          <description>Interrupt Disable Register (channel = 2)</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR2</name>
          <description>Interrupt Mask Register (channel = 2)</description>
          <addressOffset>0x000000AC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BCR</name>
          <description>Block Control Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SYNC</name>
              <description>Synchro Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BMR</name>
          <description>Block Mode Register</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TC0XC0S</name>
              <description>External Clock Signal 0 Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK0</name>
                  <description>Signal connected to XC0: TCLK0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA1</name>
                  <description>Signal connected to XC0: TIOA1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC0: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TC1XC1S</name>
              <description>External Clock Signal 1 Selection</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK1</name>
                  <description>Signal connected to XC1: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA0</name>
                  <description>Signal connected to XC1: TIOA0</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC1: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TC2XC2S</name>
              <description>External Clock Signal 2 Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK2</name>
                  <description>Signal connected to XC2: TCLK2</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA1</name>
                  <description>Signal connected to XC2: TIOA1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC2: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TC1</name>
      <version>6082O</version>
      <description>Timer Counter 1</description>
      <groupName>TC</groupName>
      <prependToName>TC1_</prependToName>
      <baseAddress>0xF800C000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CCR0</name>
          <description>Channel Control Register (channel = 0)</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR0</name>
          <description>Channel Mode Register (channel = 0)</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR0_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 0)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RAB0</name>
          <description>Register AB (channel = 0)</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RAB</name>
              <description>Register A or Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV0</name>
          <description>Counter Value (channel = 0)</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA0</name>
          <description>Register A (channel = 0)</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB0</name>
          <description>Register B (channel = 0)</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC0</name>
          <description>Register C (channel = 0)</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR0</name>
          <description>Status Register (channel = 0)</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER0</name>
          <description>Interrupt Enable Register (channel = 0)</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR0</name>
          <description>Interrupt Disable Register (channel = 0)</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR0</name>
          <description>Interrupt Mask Register (channel = 0)</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCR1</name>
          <description>Channel Control Register (channel = 1)</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR1</name>
          <description>Channel Mode Register (channel = 1)</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR1_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 1)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RAB1</name>
          <description>Register AB (channel = 1)</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RAB</name>
              <description>Register A or Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV1</name>
          <description>Counter Value (channel = 1)</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA1</name>
          <description>Register A (channel = 1)</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB1</name>
          <description>Register B (channel = 1)</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC1</name>
          <description>Register C (channel = 1)</description>
          <addressOffset>0x0000005C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR1</name>
          <description>Status Register (channel = 1)</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER1</name>
          <description>Interrupt Enable Register (channel = 1)</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR1</name>
          <description>Interrupt Disable Register (channel = 1)</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR1</name>
          <description>Interrupt Mask Register (channel = 1)</description>
          <addressOffset>0x0000006C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCR2</name>
          <description>Channel Control Register (channel = 2)</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>Counter Clock Enable Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKDIS</name>
              <description>Counter Clock Disable Command</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWTRG</name>
              <description>Software Trigger Command</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR2</name>
          <description>Channel Mode Register (channel = 2)</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDBSTOP</name>
              <description>Counter Clock Stopped with RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDBDIS</name>
              <description>Counter Clock Disable with RB Loading</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ETRGEDG</name>
              <description>External Trigger Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ABETRG</name>
              <description>TIOA or TIOB External Trigger Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCTRG</name>
              <description>RC Compare Trigger Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LDRA</name>
              <description>RA Loading Edge Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LDRB</name>
              <description>RB Loading Edge Selection</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge of TIOA</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge of TIOA</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge of TIOA</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR2_WAVE_EQ_1</name>
          <description>Channel Mode Register (channel = 2)</description>
          <alternateGroup>WAVE_EQ_1</alternateGroup>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TCCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIMER_CLOCK1</name>
                  <description>Clock selected: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK2</name>
                  <description>Clock selected: TCLK2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK3</name>
                  <description>Clock selected: TCLK3</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK4</name>
                  <description>Clock selected: TCLK4</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIMER_CLOCK5</name>
                  <description>Clock selected: TCLK5</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>Clock selected: XC0</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>Clock selected: XC1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>Clock selected: XC2</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLKI</name>
              <description>Clock Invert</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BURST</name>
              <description>Burst Signal Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>The clock is not gated by an external signal.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0 is ANDed with the selected clock.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1 is ANDed with the selected clock.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2 is ANDed with the selected clock.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPCSTOP</name>
              <description>Counter Clock Stopped with RC Compare</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPCDIS</name>
              <description>Counter Clock Disable with RC Compare</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EEVTEDG</name>
              <description>External Event Edge Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RISING</name>
                  <description>Rising edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FALLING</name>
                  <description>Falling edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EDGE</name>
                  <description>Each edge</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EEVT</name>
              <description>External Event Selection</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TIOB</name>
                  <description>TIOB</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC0</name>
                  <description>XC0</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC1</name>
                  <description>XC1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XC2</name>
                  <description>XC2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENETRG</name>
              <description>External Event Trigger Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WAVSEL</name>
              <description>Waveform Selection</description>
              <bitOffset>13</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>UP</name>
                  <description>UP mode without automatic trigger on RC Compare</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN</name>
                  <description>UPDOWN mode without automatic trigger on RC Compare</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UP_RC</name>
                  <description>UP mode with automatic trigger on RC Compare</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UPDOWN_RC</name>
                  <description>UPDOWN mode with automatic trigger on RC Compare</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WAVE</name>
              <description>Waveform Mode</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACPA</name>
              <description>RA Compare Effect on TIOA</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACPC</name>
              <description>RC Compare Effect on TIOA</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AEEVT</name>
              <description>External Event Effect on TIOA</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ASWTRG</name>
              <description>Software Trigger Effect on TIOA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPB</name>
              <description>RB Compare Effect on TIOB</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCPC</name>
              <description>RC Compare Effect on TIOB</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BEEVT</name>
              <description>External Event Effect on TIOB</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BSWTRG</name>
              <description>Software Trigger Effect on TIOB</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SET</name>
                  <description>Set</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLEAR</name>
                  <description>Clear</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TOGGLE</name>
                  <description>Toggle</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RAB2</name>
          <description>Register AB (channel = 2)</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RAB</name>
              <description>Register A or Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CV2</name>
          <description>Counter Value (channel = 2)</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CV</name>
              <description>Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RA2</name>
          <description>Register A (channel = 2)</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RA</name>
              <description>Register A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RB2</name>
          <description>Register B (channel = 2)</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RB</name>
              <description>Register B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RC2</name>
          <description>Register C (channel = 2)</description>
          <addressOffset>0x0000009C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RC</name>
              <description>Register C</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR2</name>
          <description>Status Register (channel = 2)</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CLKSTA</name>
              <description>Clock Enabling Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOA</name>
              <description>TIOA Mirror</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MTIOB</name>
              <description>TIOB Mirror</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER2</name>
          <description>Interrupt Enable Register (channel = 2)</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR2</name>
          <description>Interrupt Disable Register (channel = 2)</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR2</name>
          <description>Interrupt Mask Register (channel = 2)</description>
          <addressOffset>0x000000AC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COVFS</name>
              <description>Counter Overflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOVRS</name>
              <description>Load Overrun</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPAS</name>
              <description>RA Compare</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPBS</name>
              <description>RB Compare</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CPCS</name>
              <description>RC Compare</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRAS</name>
              <description>RA Loading</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LDRBS</name>
              <description>RB Loading</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ETRGS</name>
              <description>External Trigger</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BCR</name>
          <description>Block Control Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SYNC</name>
              <description>Synchro Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BMR</name>
          <description>Block Mode Register</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TC0XC0S</name>
              <description>External Clock Signal 0 Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK0</name>
                  <description>Signal connected to XC0: TCLK0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA1</name>
                  <description>Signal connected to XC0: TIOA1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC0: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TC1XC1S</name>
              <description>External Clock Signal 1 Selection</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK1</name>
                  <description>Signal connected to XC1: TCLK1</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA0</name>
                  <description>Signal connected to XC1: TIOA0</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC1: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TC2XC2S</name>
              <description>External Clock Signal 2 Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>TCLK2</name>
                  <description>Signal connected to XC2: TCLK2</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA1</name>
                  <description>Signal connected to XC2: TIOA1</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TIOA2</name>
                  <description>Signal connected to XC2: TIOA2</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TWI0</name>
      <version>6212M</version>
      <description>Two-wire Interface 0</description>
      <groupName>TWI</groupName>
      <prependToName>TWI0_</prependToName>
      <baseAddress>0xF8010000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>TWI0</name>
        <value>9</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>START</name>
              <description>Send a START Condition</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STOP</name>
              <description>Send a STOP Condition</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MSEN</name>
              <description>TWI Master Mode Enabled</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MSDIS</name>
              <description>TWI Master Mode Disabled</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVEN</name>
              <description>TWI Slave Mode Enabled</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVDIS</name>
              <description>TWI Slave Mode Disabled</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>QUICK</name>
              <description>SMBUS Quick Command</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWRST</name>
              <description>Software Reset</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR</name>
          <description>Master Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IADRSZ</name>
              <description>Internal Device Address Size</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>No internal device address</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_BYTE</name>
                  <description>One-byte internal device address</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BYTE</name>
                  <description>Two-byte internal device address</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_BYTE</name>
                  <description>Three-byte internal device address</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MREAD</name>
              <description>Master Read Direction</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DADR</name>
              <description>Device Address</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SMR</name>
          <description>Slave Mode Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADR</name>
              <description>Slave Address</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IADR</name>
          <description>Internal Address Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IADR</name>
              <description>Internal Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CWGR</name>
          <description>Clock Waveform Generator Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CLDIV</name>
              <description>Clock Low Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHDIV</name>
              <description>Clock High Divider</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CKDIV</name>
              <description>Clock Divider</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x0000F009</resetValue>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed (automatically set / reset)</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready (automatically set / reset)</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready (automatically set / reset)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SVREAD</name>
              <description>Slave Read (automatically set / reset)</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access (automatically set / reset)</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access (clear on read)</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error (clear on read)</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledged (clear on read)</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost (clear on read)</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SCLWS</name>
              <description>Clock Wait State (automatically set / reset)</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access (clear on read)</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledge Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SCL_WS</name>
              <description>Clock Wait State Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledge Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SCL_WS</name>
              <description>Clock Wait State Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledge Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SCL_WS</name>
              <description>Clock Wait State Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receive Holding Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXDATA</name>
              <description>Master or Slave Receive Holding Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmit Holding Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXDATA</name>
              <description>Master or Slave Transmit Holding Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPROT_MODE</name>
          <description>Protection Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPROT</name>
              <description>Write protection bit</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SECURITY_CODE</name>
              <description>Write protection mode security code</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPROT_STATUS</name>
          <description>Protection Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPROTERR</name>
              <description>Write Protection Error</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPROTADDR</name>
              <description>Write Protection Error Address</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TWI1</name>
      <version>6212M</version>
      <description>Two-wire Interface 1</description>
      <groupName>TWI</groupName>
      <prependToName>TWI1_</prependToName>
      <baseAddress>0xF8014000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>TWI1</name>
        <value>10</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>START</name>
              <description>Send a START Condition</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STOP</name>
              <description>Send a STOP Condition</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MSEN</name>
              <description>TWI Master Mode Enabled</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MSDIS</name>
              <description>TWI Master Mode Disabled</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVEN</name>
              <description>TWI Slave Mode Enabled</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVDIS</name>
              <description>TWI Slave Mode Disabled</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>QUICK</name>
              <description>SMBUS Quick Command</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SWRST</name>
              <description>Software Reset</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MMR</name>
          <description>Master Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IADRSZ</name>
              <description>Internal Device Address Size</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>No internal device address</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_BYTE</name>
                  <description>One-byte internal device address</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BYTE</name>
                  <description>Two-byte internal device address</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>3_BYTE</name>
                  <description>Three-byte internal device address</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MREAD</name>
              <description>Master Read Direction</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DADR</name>
              <description>Device Address</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SMR</name>
          <description>Slave Mode Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADR</name>
              <description>Slave Address</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IADR</name>
          <description>Internal Address Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IADR</name>
              <description>Internal Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CWGR</name>
          <description>Clock Waveform Generator Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CLDIV</name>
              <description>Clock Low Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHDIV</name>
              <description>Clock High Divider</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CKDIV</name>
              <description>Clock Divider</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x0000F009</resetValue>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed (automatically set / reset)</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready (automatically set / reset)</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready (automatically set / reset)</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SVREAD</name>
              <description>Slave Read (automatically set / reset)</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access (automatically set / reset)</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access (clear on read)</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error (clear on read)</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledged (clear on read)</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost (clear on read)</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SCLWS</name>
              <description>Clock Wait State (automatically set / reset)</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access (clear on read)</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledge Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SCL_WS</name>
              <description>Clock Wait State Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledge Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SCL_WS</name>
              <description>Clock Wait State Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Transmission Completed Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRDY</name>
              <description>Receive Holding Register Ready Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmit Holding Register Ready Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SVACC</name>
              <description>Slave Access Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>GACC</name>
              <description>General Call Access Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Not Acknowledge Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ARBLST</name>
              <description>Arbitration Lost Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SCL_WS</name>
              <description>Clock Wait State Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOSACC</name>
              <description>End Of Slave Access Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receive Holding Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXDATA</name>
              <description>Master or Slave Receive Holding Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmit Holding Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TXDATA</name>
              <description>Master or Slave Transmit Holding Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPROT_MODE</name>
          <description>Protection Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPROT</name>
              <description>Write protection bit</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SECURITY_CODE</name>
              <description>Write protection mode security code</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPROT_STATUS</name>
          <description>Protection Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPROTERR</name>
              <description>Write Protection Error</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPROTADDR</name>
              <description>Write Protection Error Address</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>USART0</name>
      <version>6089Y</version>
      <description>Universal Synchronous Asynchronous Receiver Transmitter 0</description>
      <groupName>USART</groupName>
      <prependToName>USART0_</prependToName>
      <baseAddress>0xF801C000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>USART0</name>
        <value>5</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTBRK</name>
              <description>Start Break</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STPBRK</name>
              <description>Stop Break</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTTO</name>
              <description>Start Time-out</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SENDA</name>
              <description>Send Address</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTIT</name>
              <description>Reset Iterations</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTNACK</name>
              <description>Reset Non Acknowledge</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RETTO</name>
              <description>Rearm Time-out</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSEN</name>
              <description>Request to Send Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSDIS</name>
              <description>Request to Send Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINABT</name>
              <description>Abort LIN Transmission</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINWKUP</name>
              <description>Send LIN Wakeup Signal</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CR_SPI_MODE</name>
          <description>Control Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCS</name>
              <description>Force SPI Chip Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCS</name>
              <description>Release SPI Chip Select</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>USART_MODE</name>
              <description>USART Mode of Operation</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RS485</name>
                  <description>RS485</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW_HANDSHAKING</name>
                  <description>Hardware Handshaking</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_0</name>
                  <description>IS07816 Protocol: T = 0</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_1</name>
                  <description>IS07816 Protocol: T = 1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IRDA</name>
                  <description>IrDA</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_MASTER</name>
                  <description>LIN Master</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_SLAVE</name>
                  <description>LIN Slave</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_MASTER</name>
                  <description>SPI Master</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_SLAVE</name>
                  <description>SPI Slave</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>USCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock MCK is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV</name>
                  <description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SCK</name>
                  <description>Serial Clock SLK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHRL</name>
              <description>Character Length.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>5_BIT</name>
                  <description>Character length is 5 bits</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>6_BIT</name>
                  <description>Character length is 6 bits</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>7_BIT</name>
                  <description>Character length is 7 bits</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>Character length is 8 bits</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SYNC</name>
              <description>Synchronous Mode Select</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PAR</name>
              <description>Parity Type</description>
              <bitOffset>9</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>EVEN</name>
                  <description>Even parity</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ODD</name>
                  <description>Odd parity</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPACE</name>
                  <description>Parity forced to 0 (Space)</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MARK</name>
                  <description>Parity forced to 1 (Mark)</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NO</name>
                  <description>No parity</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MULTIDROP</name>
                  <description>Multidrop mode</description>
                  <value>0x6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NBSTOP</name>
              <description>Number of Stop Bits</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1_BIT</name>
                  <description>1 stop bit</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_5_BIT</name>
                  <description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BIT</name>
                  <description>2 stop bits</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHMODE</name>
              <description>Channel Mode</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AUTOMATIC</name>
                  <description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOCAL_LOOPBACK</name>
                  <description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REMOTE_LOOPBACK</name>
                  <description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MSBF</name>
              <description>Bit Order</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODE9</name>
              <description>9-bit Character Length</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLKO</name>
              <description>Clock Output Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OVER</name>
              <description>Oversampling Mode</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INACK</name>
              <description>Inhibit Non Acknowledge</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSNACK</name>
              <description>Disable Successive NACK</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VAR_SYNC</name>
              <description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVDATA</name>
              <description>INverted Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAX_ITERATION</name>
              <description>Maximum Number of Automatic Iteration</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FILTER</name>
              <description>Infrared Receive Line Filter</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAN</name>
              <description>Manchester Encoder/Decoder Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODSYNC</name>
              <description>Manchester Synchronization Mode</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ONEBIT</name>
              <description>Start Frame Delimiter Selector</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR_SPI_MODE</name>
          <description>Mode Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>USART_MODE</name>
              <description>USART Mode of Operation</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SPI_MASTER</name>
                  <description>SPI Master</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_SLAVE</name>
                  <description>SPI Slave</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>USCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock MCK is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV</name>
                  <description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SCK</name>
                  <description>Serial Clock SLK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHRL</name>
              <description>Character Length.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>Character length is 8 bits</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPHA</name>
              <description>SPI Clock Phase</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>SPI Clock Polarity</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WRDBT</name>
              <description>Wait Read Data Before Transfer</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER_SPI_MODE</name>
          <description>Interrupt Enable Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER_LIN_MODE</name>
          <description>Interrupt Enable Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR_SPI_MODE</name>
          <description>Interrupt Disable Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR_LIN_MODE</name>
          <description>Interrupt Disable Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR_SPI_MODE</name>
          <description>Interrupt Mask Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR_LIN_MODE</name>
          <description>Interrupt Mask Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR</name>
          <description>Channel Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Break Received/End of Break</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Receiver Time-out</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Flag</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTS</name>
              <description>Image of CTS Input</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANERR</name>
              <description>Manchester Error</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR_SPI_MODE</name>
          <description>Channel Status Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Underrun Error</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR_LIN_MODE</name>
          <description>Channel Status Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Receiver Time-out</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBLS</name>
              <description>LIN Bus Line Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bit Error</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Error</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receiver Holding Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCHR</name>
              <description>Received Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSYNH</name>
              <description>Received Sync</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmitter Holding Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCHR</name>
              <description>Character to be Transmitted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSYNH</name>
              <description>Sync Field to be transmitted</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BRGR</name>
          <description>Baud Rate Generator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CD</name>
              <description>Clock Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FP</name>
              <description>Fractional Part</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RTOR</name>
          <description>Receiver Time-out Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TO</name>
              <description>Time-out Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>17</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TTGR</name>
          <description>Transmitter Timeguard Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TG</name>
              <description>Timeguard Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FIDI</name>
          <description>FI DI Ratio Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000174</resetValue>
          <fields>
            <field>
              <name>FI_DI_RATIO</name>
              <description>FI Over DI Ratio Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>NER</name>
          <description>Number of Errors Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>NB_ERRORS</name>
              <description>Number of Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IF</name>
          <description>IrDA Filter Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRDA_FILTER</name>
              <description>IrDA Filter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MAN</name>
          <description>Manchester Encoder Decoder Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0xB0011004</resetValue>
          <fields>
            <field>
              <name>TX_PL</name>
              <description>Transmitter Preamble Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TX_PP</name>
              <description>Transmitter Preamble Pattern</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TX_MPOL</name>
              <description>Transmitter Manchester Polarity</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PL</name>
              <description>Receiver Preamble Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PP</name>
              <description>Receiver Preamble Pattern detected</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RX_MPOL</name>
              <description>Receiver Manchester Polarity</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ONE</name>
              <description>Must Be Set to 1</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DRIFT</name>
              <description>Drift compensation</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINMR</name>
          <description>LIN Mode Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NACT</name>
              <description>LIN Node Action</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PUBLISH</name>
                  <description>The USART transmits the response.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUBSCRIBE</name>
                  <description>The USART receives the response.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IGNORE</name>
                  <description>The USART does not transmit and does not receive the response.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARDIS</name>
              <description>Parity Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKDIS</name>
              <description>Checksum Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKTYP</name>
              <description>Checksum Type</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLM</name>
              <description>Data Length Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSDIS</name>
              <description>Frame Slot Mode Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WKUPTYP</name>
              <description>Wakeup Signal Type</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLC</name>
              <description>Data Length Control</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PDCM</name>
              <description>DMAC Mode</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINIR</name>
          <description>LIN Identifier Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDCHR</name>
              <description>Identifier Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>USART1</name>
      <version>6089Y</version>
      <description>Universal Synchronous Asynchronous Receiver Transmitter 1</description>
      <groupName>USART</groupName>
      <prependToName>USART1_</prependToName>
      <baseAddress>0xF8020000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>USART1</name>
        <value>6</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTBRK</name>
              <description>Start Break</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STPBRK</name>
              <description>Stop Break</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTTO</name>
              <description>Start Time-out</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SENDA</name>
              <description>Send Address</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTIT</name>
              <description>Reset Iterations</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTNACK</name>
              <description>Reset Non Acknowledge</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RETTO</name>
              <description>Rearm Time-out</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSEN</name>
              <description>Request to Send Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSDIS</name>
              <description>Request to Send Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINABT</name>
              <description>Abort LIN Transmission</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINWKUP</name>
              <description>Send LIN Wakeup Signal</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CR_SPI_MODE</name>
          <description>Control Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCS</name>
              <description>Force SPI Chip Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCS</name>
              <description>Release SPI Chip Select</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>USART_MODE</name>
              <description>USART Mode of Operation</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RS485</name>
                  <description>RS485</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW_HANDSHAKING</name>
                  <description>Hardware Handshaking</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_0</name>
                  <description>IS07816 Protocol: T = 0</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_1</name>
                  <description>IS07816 Protocol: T = 1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IRDA</name>
                  <description>IrDA</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_MASTER</name>
                  <description>LIN Master</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_SLAVE</name>
                  <description>LIN Slave</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_MASTER</name>
                  <description>SPI Master</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_SLAVE</name>
                  <description>SPI Slave</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>USCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock MCK is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV</name>
                  <description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SCK</name>
                  <description>Serial Clock SLK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHRL</name>
              <description>Character Length.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>5_BIT</name>
                  <description>Character length is 5 bits</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>6_BIT</name>
                  <description>Character length is 6 bits</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>7_BIT</name>
                  <description>Character length is 7 bits</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>Character length is 8 bits</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SYNC</name>
              <description>Synchronous Mode Select</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PAR</name>
              <description>Parity Type</description>
              <bitOffset>9</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>EVEN</name>
                  <description>Even parity</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ODD</name>
                  <description>Odd parity</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPACE</name>
                  <description>Parity forced to 0 (Space)</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MARK</name>
                  <description>Parity forced to 1 (Mark)</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NO</name>
                  <description>No parity</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MULTIDROP</name>
                  <description>Multidrop mode</description>
                  <value>0x6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NBSTOP</name>
              <description>Number of Stop Bits</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1_BIT</name>
                  <description>1 stop bit</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_5_BIT</name>
                  <description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BIT</name>
                  <description>2 stop bits</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHMODE</name>
              <description>Channel Mode</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AUTOMATIC</name>
                  <description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOCAL_LOOPBACK</name>
                  <description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REMOTE_LOOPBACK</name>
                  <description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MSBF</name>
              <description>Bit Order</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODE9</name>
              <description>9-bit Character Length</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLKO</name>
              <description>Clock Output Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OVER</name>
              <description>Oversampling Mode</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INACK</name>
              <description>Inhibit Non Acknowledge</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSNACK</name>
              <description>Disable Successive NACK</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VAR_SYNC</name>
              <description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVDATA</name>
              <description>INverted Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAX_ITERATION</name>
              <description>Maximum Number of Automatic Iteration</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FILTER</name>
              <description>Infrared Receive Line Filter</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAN</name>
              <description>Manchester Encoder/Decoder Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODSYNC</name>
              <description>Manchester Synchronization Mode</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ONEBIT</name>
              <description>Start Frame Delimiter Selector</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR_SPI_MODE</name>
          <description>Mode Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>USART_MODE</name>
              <description>USART Mode of Operation</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SPI_MASTER</name>
                  <description>SPI Master</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_SLAVE</name>
                  <description>SPI Slave</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>USCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock MCK is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV</name>
                  <description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SCK</name>
                  <description>Serial Clock SLK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHRL</name>
              <description>Character Length.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>Character length is 8 bits</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPHA</name>
              <description>SPI Clock Phase</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>SPI Clock Polarity</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WRDBT</name>
              <description>Wait Read Data Before Transfer</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER_SPI_MODE</name>
          <description>Interrupt Enable Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER_LIN_MODE</name>
          <description>Interrupt Enable Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR_SPI_MODE</name>
          <description>Interrupt Disable Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR_LIN_MODE</name>
          <description>Interrupt Disable Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR_SPI_MODE</name>
          <description>Interrupt Mask Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR_LIN_MODE</name>
          <description>Interrupt Mask Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR</name>
          <description>Channel Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Break Received/End of Break</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Receiver Time-out</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Flag</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTS</name>
              <description>Image of CTS Input</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANERR</name>
              <description>Manchester Error</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR_SPI_MODE</name>
          <description>Channel Status Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Underrun Error</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR_LIN_MODE</name>
          <description>Channel Status Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Receiver Time-out</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBLS</name>
              <description>LIN Bus Line Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bit Error</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Error</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receiver Holding Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCHR</name>
              <description>Received Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSYNH</name>
              <description>Received Sync</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmitter Holding Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCHR</name>
              <description>Character to be Transmitted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSYNH</name>
              <description>Sync Field to be transmitted</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BRGR</name>
          <description>Baud Rate Generator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CD</name>
              <description>Clock Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FP</name>
              <description>Fractional Part</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RTOR</name>
          <description>Receiver Time-out Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TO</name>
              <description>Time-out Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>17</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TTGR</name>
          <description>Transmitter Timeguard Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TG</name>
              <description>Timeguard Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FIDI</name>
          <description>FI DI Ratio Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000174</resetValue>
          <fields>
            <field>
              <name>FI_DI_RATIO</name>
              <description>FI Over DI Ratio Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>NER</name>
          <description>Number of Errors Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>NB_ERRORS</name>
              <description>Number of Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IF</name>
          <description>IrDA Filter Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRDA_FILTER</name>
              <description>IrDA Filter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MAN</name>
          <description>Manchester Encoder Decoder Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0xB0011004</resetValue>
          <fields>
            <field>
              <name>TX_PL</name>
              <description>Transmitter Preamble Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TX_PP</name>
              <description>Transmitter Preamble Pattern</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TX_MPOL</name>
              <description>Transmitter Manchester Polarity</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PL</name>
              <description>Receiver Preamble Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PP</name>
              <description>Receiver Preamble Pattern detected</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RX_MPOL</name>
              <description>Receiver Manchester Polarity</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ONE</name>
              <description>Must Be Set to 1</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DRIFT</name>
              <description>Drift compensation</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINMR</name>
          <description>LIN Mode Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NACT</name>
              <description>LIN Node Action</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PUBLISH</name>
                  <description>The USART transmits the response.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUBSCRIBE</name>
                  <description>The USART receives the response.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IGNORE</name>
                  <description>The USART does not transmit and does not receive the response.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARDIS</name>
              <description>Parity Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKDIS</name>
              <description>Checksum Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKTYP</name>
              <description>Checksum Type</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLM</name>
              <description>Data Length Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSDIS</name>
              <description>Frame Slot Mode Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WKUPTYP</name>
              <description>Wakeup Signal Type</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLC</name>
              <description>Data Length Control</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PDCM</name>
              <description>DMAC Mode</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINIR</name>
          <description>LIN Identifier Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDCHR</name>
              <description>Identifier Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>USART2</name>
      <version>6089Y</version>
      <description>Universal Synchronous Asynchronous Receiver Transmitter 2</description>
      <groupName>USART</groupName>
      <prependToName>USART2_</prependToName>
      <baseAddress>0xF8024000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>USART2</name>
        <value>7</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTBRK</name>
              <description>Start Break</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STPBRK</name>
              <description>Stop Break</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTTO</name>
              <description>Start Time-out</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SENDA</name>
              <description>Send Address</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTIT</name>
              <description>Reset Iterations</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTNACK</name>
              <description>Reset Non Acknowledge</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RETTO</name>
              <description>Rearm Time-out</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSEN</name>
              <description>Request to Send Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSDIS</name>
              <description>Request to Send Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINABT</name>
              <description>Abort LIN Transmission</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINWKUP</name>
              <description>Send LIN Wakeup Signal</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CR_SPI_MODE</name>
          <description>Control Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCS</name>
              <description>Force SPI Chip Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCS</name>
              <description>Release SPI Chip Select</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>USART_MODE</name>
              <description>USART Mode of Operation</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RS485</name>
                  <description>RS485</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW_HANDSHAKING</name>
                  <description>Hardware Handshaking</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_0</name>
                  <description>IS07816 Protocol: T = 0</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_1</name>
                  <description>IS07816 Protocol: T = 1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IRDA</name>
                  <description>IrDA</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_MASTER</name>
                  <description>LIN Master</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_SLAVE</name>
                  <description>LIN Slave</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_MASTER</name>
                  <description>SPI Master</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_SLAVE</name>
                  <description>SPI Slave</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>USCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock MCK is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV</name>
                  <description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SCK</name>
                  <description>Serial Clock SLK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHRL</name>
              <description>Character Length.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>5_BIT</name>
                  <description>Character length is 5 bits</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>6_BIT</name>
                  <description>Character length is 6 bits</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>7_BIT</name>
                  <description>Character length is 7 bits</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>Character length is 8 bits</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SYNC</name>
              <description>Synchronous Mode Select</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PAR</name>
              <description>Parity Type</description>
              <bitOffset>9</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>EVEN</name>
                  <description>Even parity</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ODD</name>
                  <description>Odd parity</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPACE</name>
                  <description>Parity forced to 0 (Space)</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MARK</name>
                  <description>Parity forced to 1 (Mark)</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NO</name>
                  <description>No parity</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MULTIDROP</name>
                  <description>Multidrop mode</description>
                  <value>0x6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NBSTOP</name>
              <description>Number of Stop Bits</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1_BIT</name>
                  <description>1 stop bit</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_5_BIT</name>
                  <description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BIT</name>
                  <description>2 stop bits</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHMODE</name>
              <description>Channel Mode</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AUTOMATIC</name>
                  <description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOCAL_LOOPBACK</name>
                  <description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REMOTE_LOOPBACK</name>
                  <description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MSBF</name>
              <description>Bit Order</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODE9</name>
              <description>9-bit Character Length</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLKO</name>
              <description>Clock Output Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OVER</name>
              <description>Oversampling Mode</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INACK</name>
              <description>Inhibit Non Acknowledge</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSNACK</name>
              <description>Disable Successive NACK</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VAR_SYNC</name>
              <description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVDATA</name>
              <description>INverted Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAX_ITERATION</name>
              <description>Maximum Number of Automatic Iteration</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FILTER</name>
              <description>Infrared Receive Line Filter</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAN</name>
              <description>Manchester Encoder/Decoder Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODSYNC</name>
              <description>Manchester Synchronization Mode</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ONEBIT</name>
              <description>Start Frame Delimiter Selector</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR_SPI_MODE</name>
          <description>Mode Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>USART_MODE</name>
              <description>USART Mode of Operation</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SPI_MASTER</name>
                  <description>SPI Master</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_SLAVE</name>
                  <description>SPI Slave</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>USCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock MCK is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV</name>
                  <description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SCK</name>
                  <description>Serial Clock SLK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHRL</name>
              <description>Character Length.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>Character length is 8 bits</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPHA</name>
              <description>SPI Clock Phase</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>SPI Clock Polarity</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WRDBT</name>
              <description>Wait Read Data Before Transfer</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER_SPI_MODE</name>
          <description>Interrupt Enable Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER_LIN_MODE</name>
          <description>Interrupt Enable Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR_SPI_MODE</name>
          <description>Interrupt Disable Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR_LIN_MODE</name>
          <description>Interrupt Disable Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR_SPI_MODE</name>
          <description>Interrupt Mask Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR_LIN_MODE</name>
          <description>Interrupt Mask Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR</name>
          <description>Channel Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Break Received/End of Break</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Receiver Time-out</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Flag</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTS</name>
              <description>Image of CTS Input</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANERR</name>
              <description>Manchester Error</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR_SPI_MODE</name>
          <description>Channel Status Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Underrun Error</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR_LIN_MODE</name>
          <description>Channel Status Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Receiver Time-out</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBLS</name>
              <description>LIN Bus Line Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bit Error</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Error</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receiver Holding Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCHR</name>
              <description>Received Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSYNH</name>
              <description>Received Sync</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmitter Holding Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCHR</name>
              <description>Character to be Transmitted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSYNH</name>
              <description>Sync Field to be transmitted</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BRGR</name>
          <description>Baud Rate Generator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CD</name>
              <description>Clock Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FP</name>
              <description>Fractional Part</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RTOR</name>
          <description>Receiver Time-out Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TO</name>
              <description>Time-out Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>17</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TTGR</name>
          <description>Transmitter Timeguard Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TG</name>
              <description>Timeguard Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FIDI</name>
          <description>FI DI Ratio Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000174</resetValue>
          <fields>
            <field>
              <name>FI_DI_RATIO</name>
              <description>FI Over DI Ratio Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>NER</name>
          <description>Number of Errors Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>NB_ERRORS</name>
              <description>Number of Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IF</name>
          <description>IrDA Filter Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRDA_FILTER</name>
              <description>IrDA Filter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MAN</name>
          <description>Manchester Encoder Decoder Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0xB0011004</resetValue>
          <fields>
            <field>
              <name>TX_PL</name>
              <description>Transmitter Preamble Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TX_PP</name>
              <description>Transmitter Preamble Pattern</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TX_MPOL</name>
              <description>Transmitter Manchester Polarity</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PL</name>
              <description>Receiver Preamble Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PP</name>
              <description>Receiver Preamble Pattern detected</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RX_MPOL</name>
              <description>Receiver Manchester Polarity</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ONE</name>
              <description>Must Be Set to 1</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DRIFT</name>
              <description>Drift compensation</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINMR</name>
          <description>LIN Mode Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NACT</name>
              <description>LIN Node Action</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PUBLISH</name>
                  <description>The USART transmits the response.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUBSCRIBE</name>
                  <description>The USART receives the response.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IGNORE</name>
                  <description>The USART does not transmit and does not receive the response.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARDIS</name>
              <description>Parity Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKDIS</name>
              <description>Checksum Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKTYP</name>
              <description>Checksum Type</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLM</name>
              <description>Data Length Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSDIS</name>
              <description>Frame Slot Mode Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WKUPTYP</name>
              <description>Wakeup Signal Type</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLC</name>
              <description>Data Length Control</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PDCM</name>
              <description>DMAC Mode</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINIR</name>
          <description>LIN Identifier Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDCHR</name>
              <description>Identifier Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>USART3</name>
      <version>6089Y</version>
      <description>Universal Synchronous Asynchronous Receiver Transmitter 3</description>
      <groupName>USART</groupName>
      <prependToName>USART3_</prependToName>
      <baseAddress>0xF8028000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>USART3</name>
        <value>8</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTBRK</name>
              <description>Start Break</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STPBRK</name>
              <description>Stop Break</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>STTTO</name>
              <description>Start Time-out</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SENDA</name>
              <description>Send Address</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTIT</name>
              <description>Reset Iterations</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTNACK</name>
              <description>Reset Non Acknowledge</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RETTO</name>
              <description>Rearm Time-out</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSEN</name>
              <description>Request to Send Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RTSDIS</name>
              <description>Request to Send Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINABT</name>
              <description>Abort LIN Transmission</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINWKUP</name>
              <description>Send LIN Wakeup Signal</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CR_SPI_MODE</name>
          <description>Control Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FCS</name>
              <description>Force SPI Chip Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RCS</name>
              <description>Release SPI Chip Select</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>USART_MODE</name>
              <description>USART Mode of Operation</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RS485</name>
                  <description>RS485</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW_HANDSHAKING</name>
                  <description>Hardware Handshaking</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_0</name>
                  <description>IS07816 Protocol: T = 0</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IS07816_T_1</name>
                  <description>IS07816 Protocol: T = 1</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IRDA</name>
                  <description>IrDA</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_MASTER</name>
                  <description>LIN Master</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LIN_SLAVE</name>
                  <description>LIN Slave</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_MASTER</name>
                  <description>SPI Master</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_SLAVE</name>
                  <description>SPI Slave</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>USCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock MCK is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV</name>
                  <description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SCK</name>
                  <description>Serial Clock SLK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHRL</name>
              <description>Character Length.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>5_BIT</name>
                  <description>Character length is 5 bits</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>6_BIT</name>
                  <description>Character length is 6 bits</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>7_BIT</name>
                  <description>Character length is 7 bits</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>Character length is 8 bits</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SYNC</name>
              <description>Synchronous Mode Select</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PAR</name>
              <description>Parity Type</description>
              <bitOffset>9</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>EVEN</name>
                  <description>Even parity</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ODD</name>
                  <description>Odd parity</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPACE</name>
                  <description>Parity forced to 0 (Space)</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MARK</name>
                  <description>Parity forced to 1 (Mark)</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NO</name>
                  <description>No parity</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MULTIDROP</name>
                  <description>Multidrop mode</description>
                  <value>0x6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NBSTOP</name>
              <description>Number of Stop Bits</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1_BIT</name>
                  <description>1 stop bit</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1_5_BIT</name>
                  <description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2_BIT</name>
                  <description>2 stop bits</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHMODE</name>
              <description>Channel Mode</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AUTOMATIC</name>
                  <description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOCAL_LOOPBACK</name>
                  <description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REMOTE_LOOPBACK</name>
                  <description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MSBF</name>
              <description>Bit Order</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODE9</name>
              <description>9-bit Character Length</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLKO</name>
              <description>Clock Output Select</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OVER</name>
              <description>Oversampling Mode</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INACK</name>
              <description>Inhibit Non Acknowledge</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSNACK</name>
              <description>Disable Successive NACK</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VAR_SYNC</name>
              <description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>INVDATA</name>
              <description>INverted Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAX_ITERATION</name>
              <description>Maximum Number of Automatic Iteration</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FILTER</name>
              <description>Infrared Receive Line Filter</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAN</name>
              <description>Manchester Encoder/Decoder Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODSYNC</name>
              <description>Manchester Synchronization Mode</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ONEBIT</name>
              <description>Start Frame Delimiter Selector</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR_SPI_MODE</name>
          <description>Mode Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>USART_MODE</name>
              <description>USART Mode of Operation</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SPI_MASTER</name>
                  <description>SPI Master</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPI_SLAVE</name>
                  <description>SPI Slave</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>USCLKS</name>
              <description>Clock Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock MCK is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV</name>
                  <description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SCK</name>
                  <description>Serial Clock SLK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHRL</name>
              <description>Character Length.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>8_BIT</name>
                  <description>Character length is 8 bits</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPHA</name>
              <description>SPI Clock Phase</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>SPI Clock Polarity</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WRDBT</name>
              <description>Wait Read Data Before Transfer</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER_SPI_MODE</name>
          <description>Interrupt Enable Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER_LIN_MODE</name>
          <description>Interrupt Enable Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR_SPI_MODE</name>
          <description>Interrupt Disable Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR_LIN_MODE</name>
          <description>Interrupt Disable Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Receiver Break Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANE</name>
              <description>Manchester Error Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR_SPI_MODE</name>
          <description>Interrupt Mask Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>SPI Underrun Error Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR_LIN_MODE</name>
          <description>Interrupt Mask Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>RXRDY Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>TXRDY Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Time-out Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>TXEMPTY Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bus Error Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR</name>
          <description>Channel Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXBRK</name>
              <description>Break Received/End of Break</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Receiver Time-out</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ITER</name>
              <description>Max number of Repetitions Reached</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NACK</name>
              <description>Non Acknowledge Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTSIC</name>
              <description>Clear to Send Input Change Flag</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CTS</name>
              <description>Image of CTS Input</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MANERR</name>
              <description>Manchester Error</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR_SPI_MODE</name>
          <description>Channel Status Register</description>
          <alternateGroup>SPI_MODE</alternateGroup>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UNRE</name>
              <description>Underrun Error</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR_LIN_MODE</name>
          <description>Channel Status Register</description>
          <alternateGroup>LIN_MODE</alternateGroup>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Receiver Time-out</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBK</name>
              <description>LIN Break Sent or LIN Break Received</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINID</name>
              <description>LIN Identifier Sent or LIN Identifier Received</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINTC</name>
              <description>LIN Transfer Completed</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBLS</name>
              <description>LIN Bus Line Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINBE</name>
              <description>LIN Bit Error</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINISFE</name>
              <description>LIN Inconsistent Synch Field Error</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINIPE</name>
              <description>LIN Identifier Parity Error</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINCE</name>
              <description>LIN Checksum Error</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LINSNRE</name>
              <description>LIN Slave Not Responding Error</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receiver Holding Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCHR</name>
              <description>Received Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSYNH</name>
              <description>Received Sync</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmitter Holding Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCHR</name>
              <description>Character to be Transmitted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXSYNH</name>
              <description>Sync Field to be transmitted</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BRGR</name>
          <description>Baud Rate Generator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CD</name>
              <description>Clock Divider</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FP</name>
              <description>Fractional Part</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RTOR</name>
          <description>Receiver Time-out Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TO</name>
              <description>Time-out Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>17</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TTGR</name>
          <description>Transmitter Timeguard Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TG</name>
              <description>Timeguard Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FIDI</name>
          <description>FI DI Ratio Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000174</resetValue>
          <fields>
            <field>
              <name>FI_DI_RATIO</name>
              <description>FI Over DI Ratio Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>NER</name>
          <description>Number of Errors Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>NB_ERRORS</name>
              <description>Number of Errors</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IF</name>
          <description>IrDA Filter Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRDA_FILTER</name>
              <description>IrDA Filter</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MAN</name>
          <description>Manchester Encoder Decoder Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0xB0011004</resetValue>
          <fields>
            <field>
              <name>TX_PL</name>
              <description>Transmitter Preamble Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TX_PP</name>
              <description>Transmitter Preamble Pattern</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TX_MPOL</name>
              <description>Transmitter Manchester Polarity</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PL</name>
              <description>Receiver Preamble Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_PP</name>
              <description>Receiver Preamble Pattern detected</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALL_ONE</name>
                  <description>The preamble is composed of '1's</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ALL_ZERO</name>
                  <description>The preamble is composed of '0's</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ZERO_ONE</name>
                  <description>The preamble is composed of '01's</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ONE_ZERO</name>
                  <description>The preamble is composed of '10's</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RX_MPOL</name>
              <description>Receiver Manchester Polarity</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ONE</name>
              <description>Must Be Set to 1</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DRIFT</name>
              <description>Drift compensation</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINMR</name>
          <description>LIN Mode Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NACT</name>
              <description>LIN Node Action</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PUBLISH</name>
                  <description>The USART transmits the response.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUBSCRIBE</name>
                  <description>The USART receives the response.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IGNORE</name>
                  <description>The USART does not transmit and does not receive the response.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARDIS</name>
              <description>Parity Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKDIS</name>
              <description>Checksum Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CHKTYP</name>
              <description>Checksum Type</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLM</name>
              <description>Data Length Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FSDIS</name>
              <description>Frame Slot Mode Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WKUPTYP</name>
              <description>Wakeup Signal Type</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLC</name>
              <description>Data Length Control</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PDCM</name>
              <description>DMAC Mode</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LINIR</name>
          <description>LIN Identifier Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IDCHR</name>
              <description>Identifier Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PWM</name>
      <version>6044I</version>
      <description>Pulse Width Modulation Controller</description>
      <prependToName>PWM_</prependToName>
      <baseAddress>0xF8034000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>PWM</name>
        <value>18</value>
      </interrupt>
      <registers>
        <register>
          <name>MR</name>
          <description>PWM Mode Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIVA</name>
              <description>CLKA, CLKB Divide Factor</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CLK_OFF</name>
                  <description>CLKA, CLKB clock is turned off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_DIV1</name>
                  <description>CLKA, CLKB clock is clock selected by PREA, PREB</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREA</name>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV2</name>
                  <description>Master Clock divided by 2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV4</name>
                  <description>Master Clock divided by 4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV8</name>
                  <description>Master Clock divided by 8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV16</name>
                  <description>Master Clock divided by 16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV32</name>
                  <description>Master Clock divided by 32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV64</name>
                  <description>Master Clock divided by 64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV128</name>
                  <description>Master Clock divided by 128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV256</name>
                  <description>Master Clock divided by 256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV512</name>
                  <description>Master Clock divided by 512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV1024</name>
                  <description>Master Clock divided by 1024</description>
                  <value>0xA</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DIVB</name>
              <description>CLKA, CLKB Divide Factor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CLK_OFF</name>
                  <description>CLKA, CLKB clock is turned off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLK_DIV1</name>
                  <description>CLKA, CLKB clock is clock selected by PREA, PREB</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREB</name>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV2</name>
                  <description>Master Clock divided by 2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV4</name>
                  <description>Master Clock divided by 4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV8</name>
                  <description>Master Clock divided by 8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV16</name>
                  <description>Master Clock divided by 16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV32</name>
                  <description>Master Clock divided by 32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV64</name>
                  <description>Master Clock divided by 64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV128</name>
                  <description>Master Clock divided by 128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV256</name>
                  <description>Master Clock divided by 256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV512</name>
                  <description>Master Clock divided by 512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV1024</name>
                  <description>Master Clock divided by 1024</description>
                  <value>0xA</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENA</name>
          <description>PWM Enable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Channel ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Channel ID</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Channel ID</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Channel ID</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DIS</name>
          <description>PWM Disable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Channel ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Channel ID</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Channel ID</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Channel ID</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>PWM Status Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Channel ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Channel ID</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Channel ID</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Channel ID</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>PWM Interrupt Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Channel ID.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Channel ID.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Channel ID.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Channel ID.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>PWM Interrupt Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Channel ID.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Channel ID.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Channel ID.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Channel ID.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>PWM Interrupt Mask Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Channel ID.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Channel ID.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Channel ID.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Channel ID.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>PWM Interrupt Status Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHID0</name>
              <description>Channel ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID1</name>
              <description>Channel ID</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID2</name>
              <description>Channel ID</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHID3</name>
              <description>Channel ID</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR0</name>
          <description>PWM Channel Mode Register (ch_num = 0)</description>
          <addressOffset>0x00000200</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRE</name>
              <description>Channel Pre-scaler</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV2</name>
                  <description>Master Clock divided by 2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV4</name>
                  <description>Master Clock divided by 4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV8</name>
                  <description>Master Clock divided by 8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV16</name>
                  <description>Master Clock divided by 16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV32</name>
                  <description>Master Clock divided by 32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV64</name>
                  <description>Master Clock divided by 64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV128</name>
                  <description>Master Clock divided by 128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV256</name>
                  <description>Master Clock divided by 256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV512</name>
                  <description>Master Clock divided by 512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV1024</name>
                  <description>Master Clock divided by 1024</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKA</name>
                  <description>Clock A</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKB</name>
                  <description>Clock B</description>
                  <value>0xC</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALG</name>
              <description>Channel Alignment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>Channel Polarity</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPD</name>
              <description>Channel Update Period</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTY0</name>
          <description>PWM Channel Duty Cycle Register (ch_num = 0)</description>
          <addressOffset>0x00000204</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CDTY</name>
              <description>Channel Duty Cycle</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRD0</name>
          <description>PWM Channel Period Register (ch_num = 0)</description>
          <addressOffset>0x00000208</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRD</name>
              <description>Channel Period</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCNT0</name>
          <description>PWM Channel Counter Register (ch_num = 0)</description>
          <addressOffset>0x0000020C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Channel Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CUPD0</name>
          <description>PWM Channel Update Register (ch_num = 0)</description>
          <addressOffset>0x00000210</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CUPD</name>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR1</name>
          <description>PWM Channel Mode Register (ch_num = 1)</description>
          <addressOffset>0x00000220</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRE</name>
              <description>Channel Pre-scaler</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV2</name>
                  <description>Master Clock divided by 2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV4</name>
                  <description>Master Clock divided by 4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV8</name>
                  <description>Master Clock divided by 8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV16</name>
                  <description>Master Clock divided by 16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV32</name>
                  <description>Master Clock divided by 32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV64</name>
                  <description>Master Clock divided by 64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV128</name>
                  <description>Master Clock divided by 128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV256</name>
                  <description>Master Clock divided by 256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV512</name>
                  <description>Master Clock divided by 512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV1024</name>
                  <description>Master Clock divided by 1024</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKA</name>
                  <description>Clock A</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKB</name>
                  <description>Clock B</description>
                  <value>0xC</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALG</name>
              <description>Channel Alignment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>Channel Polarity</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPD</name>
              <description>Channel Update Period</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTY1</name>
          <description>PWM Channel Duty Cycle Register (ch_num = 1)</description>
          <addressOffset>0x00000224</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CDTY</name>
              <description>Channel Duty Cycle</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRD1</name>
          <description>PWM Channel Period Register (ch_num = 1)</description>
          <addressOffset>0x00000228</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRD</name>
              <description>Channel Period</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCNT1</name>
          <description>PWM Channel Counter Register (ch_num = 1)</description>
          <addressOffset>0x0000022C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Channel Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CUPD1</name>
          <description>PWM Channel Update Register (ch_num = 1)</description>
          <addressOffset>0x00000230</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CUPD</name>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR2</name>
          <description>PWM Channel Mode Register (ch_num = 2)</description>
          <addressOffset>0x00000240</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRE</name>
              <description>Channel Pre-scaler</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV2</name>
                  <description>Master Clock divided by 2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV4</name>
                  <description>Master Clock divided by 4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV8</name>
                  <description>Master Clock divided by 8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV16</name>
                  <description>Master Clock divided by 16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV32</name>
                  <description>Master Clock divided by 32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV64</name>
                  <description>Master Clock divided by 64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV128</name>
                  <description>Master Clock divided by 128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV256</name>
                  <description>Master Clock divided by 256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV512</name>
                  <description>Master Clock divided by 512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV1024</name>
                  <description>Master Clock divided by 1024</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKA</name>
                  <description>Clock A</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKB</name>
                  <description>Clock B</description>
                  <value>0xC</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALG</name>
              <description>Channel Alignment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>Channel Polarity</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPD</name>
              <description>Channel Update Period</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTY2</name>
          <description>PWM Channel Duty Cycle Register (ch_num = 2)</description>
          <addressOffset>0x00000244</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CDTY</name>
              <description>Channel Duty Cycle</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRD2</name>
          <description>PWM Channel Period Register (ch_num = 2)</description>
          <addressOffset>0x00000248</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRD</name>
              <description>Channel Period</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCNT2</name>
          <description>PWM Channel Counter Register (ch_num = 2)</description>
          <addressOffset>0x0000024C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Channel Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CUPD2</name>
          <description>PWM Channel Update Register (ch_num = 2)</description>
          <addressOffset>0x00000250</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CUPD</name>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CMR3</name>
          <description>PWM Channel Mode Register (ch_num = 3)</description>
          <addressOffset>0x00000260</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRE</name>
              <description>Channel Pre-scaler</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>Master Clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV2</name>
                  <description>Master Clock divided by 2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV4</name>
                  <description>Master Clock divided by 4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV8</name>
                  <description>Master Clock divided by 8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV16</name>
                  <description>Master Clock divided by 16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV32</name>
                  <description>Master Clock divided by 32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV64</name>
                  <description>Master Clock divided by 64</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV128</name>
                  <description>Master Clock divided by 128</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV256</name>
                  <description>Master Clock divided by 256</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV512</name>
                  <description>Master Clock divided by 512</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCKDIV1024</name>
                  <description>Master Clock divided by 1024</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKA</name>
                  <description>Clock A</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLKB</name>
                  <description>Clock B</description>
                  <value>0xC</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALG</name>
              <description>Channel Alignment</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPOL</name>
              <description>Channel Polarity</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPD</name>
              <description>Channel Update Period</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CDTY3</name>
          <description>PWM Channel Duty Cycle Register (ch_num = 3)</description>
          <addressOffset>0x00000264</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CDTY</name>
              <description>Channel Duty Cycle</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CPRD3</name>
          <description>PWM Channel Period Register (ch_num = 3)</description>
          <addressOffset>0x00000268</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPRD</name>
              <description>Channel Period</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CCNT3</name>
          <description>PWM Channel Counter Register (ch_num = 3)</description>
          <addressOffset>0x0000026C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Channel Counter Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CUPD3</name>
          <description>PWM Channel Update Register (ch_num = 3)</description>
          <addressOffset>0x00000270</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CUPD</name>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>LCDC</name>
      <version>11037E</version>
      <description>LCD Controller</description>
      <prependToName>LCDC_</prependToName>
      <baseAddress>0xF8038000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>LCDC</name>
        <value>25</value>
      </interrupt>
      <registers>
        <register>
          <name>LCDCFG0</name>
          <description>LCD Controller Configuration Register 0</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CLKPOL</name>
              <description>LCD Controller Clock Polarity</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLKSEL</name>
              <description>LCD Controller Clock Source Selection</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLKPWMSEL</name>
              <description>LCD Controller PWM Clock Source Selection</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CGDISBASE</name>
              <description>Clock Gating Disable Control for the Base Layer</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLKDIV</name>
              <description>LCD Controller Clock Divider</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDCFG1</name>
          <description>LCD Controller Configuration Register 1</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>HSPW</name>
              <description>Horizontal Synchronization Pulse Width</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VSPW</name>
              <description>Vertical Synchronization Pulse Width</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDCFG2</name>
          <description>LCD Controller Configuration Register 2</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>VFPW</name>
              <description>Vertical Front Porch Width</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VBPW</name>
              <description>Vertical Back Porch Width</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDCFG3</name>
          <description>LCD Controller Configuration Register 3</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>HFPW</name>
              <description>Horizontal Front Porch Width</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HBPW</name>
              <description>Horizontal Back Porch Width</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDCFG4</name>
          <description>LCD Controller Configuration Register 4</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PPL</name>
              <description>Number of Pixels Per Line</description>
              <bitOffset>0</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RPF</name>
              <description>Number of Active Rows Per Frame</description>
              <bitOffset>16</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDCFG5</name>
          <description>LCD Controller Configuration Register 5</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>HSPOL</name>
              <description>Horizontal Synchronization Pulse Polarity</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VSPOL</name>
              <description>Vertical Synchronization Pulse Polarity</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VSPDLYS</name>
              <description>Vertical Synchronization Pulse Start</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VSPDLYE</name>
              <description>Vertical Synchronization Pulse End</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DISPPOL</name>
              <description>Display Signal Polarity</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DITHER</name>
              <description>LCD Controller Dithering</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DISPDLY</name>
              <description>LCD Controller Display Power Signal Synchronization</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MODE</name>
              <description>LCD Controller Output Mode</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>OUTPUT_12BPP</name>
                  <description>LCD output mode is set to 12 bits per pixel</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>OUTPUT_16BPP</name>
                  <description>LCD output mode is set to 16 bits per pixel</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>OUTPUT_18BPP</name>
                  <description>LCD output mode is set to 18 bits per pixel</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>OUTPUT_24BPP</name>
                  <description>LCD output mode is set to 24 bits per pixel</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>VSPSU</name>
              <description>LCD Controller Vertical Synchronization Pulse Setup Configuration</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>VSPHO</name>
              <description>LCD Controller Vertical Synchronization Pulse Hold Configuration</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GUARDTIME</name>
              <description>LCD DISPLAY Guard Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDCFG6</name>
          <description>LCD Controller Configuration Register 6</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PWMPS</name>
              <description>PWM Clock Prescaler</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PWMPOL</name>
              <description>LCD Controller PWM Signal Polarity</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PWMCVAL</name>
              <description>LCD Controller PWM Compare Value</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDEN</name>
          <description>LCD Controller Enable Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKEN</name>
              <description>LCD Controller Pixel Clock Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SYNCEN</name>
              <description>LCD Controller Horizontal and Vertical Synchronization Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DISPEN</name>
              <description>LCD Controller DISP Signal Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PWMEN</name>
              <description>LCD Controller Pulse Width Modulation Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDDIS</name>
          <description>LCD Controller Disable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CLKDIS</name>
              <description>LCD Controller Pixel Clock Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SYNCDIS</name>
              <description>LCD Controller Horizontal and Vertical Synchronization Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DISPDIS</name>
              <description>LCD Controller DISP Signal Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PWMDIS</name>
              <description>LCD Controller Pulse Width Modulation Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CLKRST</name>
              <description>LCD Controller Clock Reset</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SYNCRST</name>
              <description>LCD Controller Horizontal and Vertical Synchronization Reset</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DISPRST</name>
              <description>LCD Controller DISP Signal Reset</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PWMRST</name>
              <description>LCD Controller PWM Reset</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDSR</name>
          <description>LCD Controller Status Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CLKSTS</name>
              <description>Clock Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LCDSTS</name>
              <description>LCD Controller Synchronization status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DISPSTS</name>
              <description>LCD Controller DISP Signal Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PWMSTS</name>
              <description>LCD Controller PWM Signal Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SIPSTS</name>
              <description>Synchronization In Progress</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDIER</name>
          <description>LCD Controller Interrupt Enable Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SOFIE</name>
              <description>Start of Frame Interrupt Enable Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DISIE</name>
              <description>LCD Disable Interrupt Enable Register</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DISPIE</name>
              <description>Power UP/Down Sequence Terminated Interrupt Enable Register</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FIFOERRIE</name>
              <description>Output FIFO Error Interrupt Enable Register</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BASEIE</name>
              <description>Base Layer Interrupt Enable Register</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDIDR</name>
          <description>LCD Controller Interrupt Disable Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SOFID</name>
              <description>Start of Frame Interrupt Disable Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DISID</name>
              <description>LCD Disable Interrupt Disable Register</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DISPID</name>
              <description>Power UP/Down Sequence Terminated Interrupt Disable Register</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FIFOERRID</name>
              <description>Output FIFO Error Interrupt Disable Register</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BASEID</name>
              <description>Base Layer Interrupt Disable Register</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDIMR</name>
          <description>LCD Controller Interrupt Mask Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SOFIM</name>
              <description>Start of Frame Interrupt Mask Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DISIM</name>
              <description>LCD Disable Interrupt Mask Register</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DISPIM</name>
              <description>Power UP/Down Sequence Terminated Interrupt Mask Register</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FIFOERRIM</name>
              <description>Output FIFO Error Interrupt Mask Register</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BASEIM</name>
              <description>Base Layer Interrupt Mask Register</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDISR</name>
          <description>LCD Controller Interrupt Status Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SOF</name>
              <description>Start of Frame Interrupt Status Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DIS</name>
              <description>LCD Disable Interrupt Status Register</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DISP</name>
              <description>Power-up/Power-down Sequence Terminated Interrupt Status Register</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FIFOERR</name>
              <description>Output FIFO Error</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BASE</name>
              <description>Base Layer Raw Interrupt Status Register</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASECHER</name>
          <description>Base Layer Channel Enable Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHEN</name>
              <description>Channel Enable Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UPDATEEN</name>
              <description>Update Overlay Attributes Enable Register</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>A2QEN</name>
              <description>Add Head Pointer Enable Register</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASECHDR</name>
          <description>Base Layer Channel Disable Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHDIS</name>
              <description>Channel Disable Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CHRST</name>
              <description>Channel Reset Register</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASECHSR</name>
          <description>Base Layer Channel Status Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CHSR</name>
              <description>Channel Status Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UPDATESR</name>
              <description>Update Overlay Attributes In Progress</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>A2QSR</name>
              <description>Add To Queue Pending Register</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASEIER</name>
          <description>Base Layer Interrupt Enable Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DMA</name>
              <description>End of DMA Transfer Interrupt Enable Register</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DSCR</name>
              <description>Descriptor Loaded Interrupt Enable Register</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ADD</name>
              <description>Head Descriptor Loaded Interrupt Enable Register</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DONE</name>
              <description>End of List Interrupt Enable Register</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVR</name>
              <description>Overflow Interrupt Enable Register</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASEIDR</name>
          <description>Base Layer Interrupt Disabled Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DMA</name>
              <description>End of DMA Transfer Interrupt Disable Register</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DSCR</name>
              <description>Descriptor Loaded Interrupt Disable Register</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ADD</name>
              <description>Head Descriptor Loaded Interrupt Disable Register</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DONE</name>
              <description>End of List Interrupt Disable Register</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVR</name>
              <description>Overflow Interrupt Disable Register</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASEIMR</name>
          <description>Base Layer Interrupt Mask Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DMA</name>
              <description>End of DMA Transfer Interrupt Mask Register</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DSCR</name>
              <description>Descriptor Loaded Interrupt Mask Register</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ADD</name>
              <description>Head Descriptor Loaded Interrupt Mask Register</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DONE</name>
              <description>End of List Interrupt Mask Register</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVR</name>
              <description>Overflow Interrupt Mask Register</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASEISR</name>
          <description>Base Layer Interrupt status Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DMA</name>
              <description>End of DMA Transfer</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DSCR</name>
              <description>DMA Descriptor Loaded</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ADD</name>
              <description>Head Descriptor Loaded</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DONE</name>
              <description>End of List Detected</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVR</name>
              <description>Overflow Detected</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASEHEAD</name>
          <description>Base Layer DMA Head Register</description>
          <addressOffset>0x0000005C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>HEAD</name>
              <description>DMA Head Pointer</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASEADDR</name>
          <description>Base Layer DMA Address Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ADDR</name>
              <description>DMA Transfer Start Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASECTRL</name>
          <description>Base Layer DMA Control Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DFETCH</name>
              <description>Transfer Descriptor Fetch Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>LFETCH</name>
              <description>Lookup Table Fetch Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DMAIEN</name>
              <description>End of DMA Transfer Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSCRIEN</name>
              <description>Descriptor Loaded Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ADDIEN</name>
              <description>Add Head Descriptor to Queue Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DONEIEN</name>
              <description>End of List Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASENEXT</name>
          <description>Base Layer DMA Next Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NEXT</name>
              <description>DMA Descriptor Next Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASECFG0</name>
          <description>Base Layer Configuration Register 0</description>
          <addressOffset>0x0000006C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BLEN</name>
              <description>AHB Burst Length</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_SINGLE</name>
                  <description>AHB Access is started as soon as there is enough space in the FIFO to store one 32-bit data. SINGLE, INCR, INCR4, INCR8 and INCR16 bursts can be used. INCR is used for a burst of 2 and 3 beats.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_INCR4</name>
                  <description>AHB Access is started as soon as there is enough space in the FIFO to store a total amount of four 32-bit data. An AHB INCR4 Burst is preferred. SINGLE, INCR and INCR4 bursts can be used. INCR is used for a burst of 2 and 3 beats.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_INCR8</name>
                  <description>AHB Access is started as soon as there is enough space in the FIFO to store a total amount of eight 32-bit data. An AHB INCR8 Burst is preferred. SINGLE, INCR, INCR4 and INCR8 bursts can be used. INCR is used for a burst of 2 and 3 beats.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_INCR16</name>
                  <description>AHB Access is started as soon as there is enough space in the FIFO to store a total amount of sixteen 32-bit data. An AHB INCR16 Burst is preferred. SINGLE, INCR, INCR4, INCR8 and INCR16 bursts can be used. INCR is used for a burst of 2 and 3 beats.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DLBO</name>
              <description>Defined Length Burst Only For Channel Bus Transaction.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASECFG1</name>
          <description>Base Layer Configuration Register 1</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CLUTEN</name>
              <description>Color Lookup Table Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RGBMODE</name>
              <description>RGB Input Mode Selection</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>12BPP_RGB_444</name>
                  <description>12 bpp RGB 444</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16BPP_ARGB_4444</name>
                  <description>16 bpp ARGB 4444</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16BPP_RGBA_4444</name>
                  <description>16 bpp RGBA 4444</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16BPP_RGB_565</name>
                  <description>16 bpp RGB 565</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16BPP_TRGB_1555</name>
                  <description>16 bpp TRGB 1555</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>18BPP_RGB_666</name>
                  <description>18 bpp RGB 666</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>18BPP_RGB_666_PACKED</name>
                  <description>18 bpp RGB 666 PACKED</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>19BPP_TRGB_1666</name>
                  <description>19 bpp TRGB 1666</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>19BPP_TRGB_PACKED</name>
                  <description>19 bpp TRGB 1666 PACKED</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>24BPP_RGB_888</name>
                  <description>24 bpp RGB 888</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>24BPP_RGB_888_PACKED</name>
                  <description>24 bpp RGB 888 PACKED</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>25BPP_TRGB_1888</name>
                  <description>25 bpp TRGB 1888</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32BPP_ARGB_8888</name>
                  <description>32 bpp ARGB 8888</description>
                  <value>0xC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32BPP_RGBA_8888</name>
                  <description>32 bpp RGBA 8888</description>
                  <value>0xD</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CLUTMODE</name>
              <description>Color Lookup Table Input Mode Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1BPP</name>
                  <description>color lookup table mode set to 1 bit per pixel</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2BPP</name>
                  <description>color lookup table mode set to 2 bits per pixel</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4BPP</name>
                  <description>color lookup table mode set to 4 bits per pixel</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8BPP</name>
                  <description>color lookup table mode set to 8 bits per pixel</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>BASECFG2</name>
          <description>Base Layer Configuration Register 2</description>
          <addressOffset>0x00000074</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>XSTRIDE</name>
              <description>Horizontal Stride</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASECFG3</name>
          <description>Base Layer Configuration Register 3</description>
          <addressOffset>0x00000078</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BDEF</name>
              <description>Blue Default</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GDEF</name>
              <description>Green Default</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RDEF</name>
              <description>Red Default</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BASECFG4</name>
          <description>Base Layer Configuration Register 4</description>
          <addressOffset>0x0000007C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DMA</name>
              <description>Use DMA Data Path</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>REP</name>
              <description>Use Replication logic to expand RGB color to 24 bits</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>256</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-255</dimIndex>
          <name>BASECLUT[%s]</name>
          <description>Base CLUT Register</description>
          <addressOffset>0x00000400</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>BCLUT</name>
              <description>Blue Color entry</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GCLUT</name>
              <description>Green Color entry</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RCLUT</name>
              <description>Red Color entry</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ADDRSIZE</name>
          <description>Address Size Register</description>
          <addressOffset>0x00001FEC</addressOffset>
          <size>32</size>
          <access>read-only</access>
        </register>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-1</dimIndex>
          <name>IPNAME[%s]</name>
          <description>IP Name1 Register</description>
          <addressOffset>0x00001FF0</addressOffset>
          <size>32</size>
          <access>read-only</access>
        </register>
        <register>
          <name>FEATURES</name>
          <description>Features Register</description>
          <addressOffset>0x00001FF8</addressOffset>
          <size>32</size>
          <access>read-only</access>
        </register>
        <register>
          <name>VERSION</name>
          <description>Version Register</description>
          <addressOffset>0x00001FFC</addressOffset>
          <size>32</size>
          <access>read-only</access>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>UDP</name>
      <version>6083V</version>
      <description>USB Device Port</description>
      <prependToName>UDP_</prependToName>
      <baseAddress>0xF803C000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>UDP</name>
        <value>23</value>
      </interrupt>
      <registers>
        <register>
          <name>FRM_NUM</name>
          <description>Frame Number Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FRM_NUM</name>
              <description>Frame Number as Defined in the Packet Field Formats</description>
              <bitOffset>0</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRM_ERR</name>
              <description>Frame Error</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRM_OK</name>
              <description>Frame OK</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>GLB_STAT</name>
          <description>Global State Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000010</resetValue>
          <fields>
            <field>
              <name>FADDEN</name>
              <description>Function Address Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CONFG</name>
              <description>Configured</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ESR</name>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RSMINPR</name>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RMWUPE</name>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FADDR</name>
          <description>Function Address Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000100</resetValue>
          <fields>
            <field>
              <name>FADD</name>
              <description>Function Address Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FEN</name>
              <description>Function Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>EP0INT</name>
              <description>Enable Endpoint 0 Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EP1INT</name>
              <description>Enable Endpoint 1 Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EP2INT</name>
              <description>Enable Endpoint 2Interrupt</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EP3INT</name>
              <description>Enable Endpoint 3 Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EP4INT</name>
              <description>Enable Endpoint 4 Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EP5INT</name>
              <description>Enable Endpoint 5 Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSUSP</name>
              <description>Enable UDP Suspend Interrupt</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRSM</name>
              <description>Enable UDP Resume Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EXTRSM</name>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SOFINT</name>
              <description>Enable Start Of Frame Interrupt</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>Enable UDP bus Wakeup Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>EP0INT</name>
              <description>Disable Endpoint 0 Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EP1INT</name>
              <description>Disable Endpoint 1 Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EP2INT</name>
              <description>Disable Endpoint 2 Interrupt</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EP3INT</name>
              <description>Disable Endpoint 3 Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EP4INT</name>
              <description>Disable Endpoint 4 Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EP5INT</name>
              <description>Disable Endpoint 5 Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXSUSP</name>
              <description>Disable UDP Suspend Interrupt</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRSM</name>
              <description>Disable UDP Resume Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EXTRSM</name>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SOFINT</name>
              <description>Disable Start Of Frame Interrupt</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>Disable USB Bus Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00001200</resetValue>
          <fields>
            <field>
              <name>EP0INT</name>
              <description>Mask Endpoint 0 Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EP1INT</name>
              <description>Mask Endpoint 1 Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EP2INT</name>
              <description>Mask Endpoint 2 Interrupt</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EP3INT</name>
              <description>Mask Endpoint 3 Interrupt</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EP4INT</name>
              <description>Mask Endpoint 4 Interrupt</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EP5INT</name>
              <description>Mask Endpoint 5 Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSUSP</name>
              <description>Mask UDP Suspend Interrupt</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRSM</name>
              <description>Mask UDP Resume Interrupt.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EXTRSM</name>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SOFINT</name>
              <description>Mask Start Of Frame Interrupt</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BIT12</name>
              <description>UDP_IMR Bit 12</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>USB Bus WAKEUP Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>EP0INT</name>
              <description>Endpoint 0 Interrupt Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EP1INT</name>
              <description>Endpoint 1 Interrupt Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EP2INT</name>
              <description>Endpoint 2 Interrupt Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EP3INT</name>
              <description>Endpoint 3 Interrupt Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EP4INT</name>
              <description>Endpoint 4 Interrupt Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EP5INT</name>
              <description>Endpoint 5 Interrupt Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXSUSP</name>
              <description>UDP Suspend Interrupt Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RXRSM</name>
              <description>UDP Resume Interrupt Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EXTRSM</name>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SOFINT</name>
              <description>Start of Frame Interrupt Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENDBUSRES</name>
              <description>End of BUS Reset Interrupt Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>UDP Resume Interrupt Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ICR</name>
          <description>Interrupt Clear Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXSUSP</name>
              <description>Clear UDP Suspend Interrupt</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXRSM</name>
              <description>Clear UDP Resume Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EXTRSM</name>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SOFINT</name>
              <description>Clear Start Of Frame Interrupt</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENDBUSRES</name>
              <description>Clear End of Bus Reset Interrupt</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>WAKEUP</name>
              <description>Clear Wakeup Interrupt</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RST_EP</name>
          <description>Reset Endpoint Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EP0</name>
              <description>Reset Endpoint 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EP1</name>
              <description>Reset Endpoint 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EP2</name>
              <description>Reset Endpoint 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EP3</name>
              <description>Reset Endpoint 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EP4</name>
              <description>Reset Endpoint 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EP5</name>
              <description>Reset Endpoint 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>6</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-5</dimIndex>
          <name>CSR[%s]</name>
          <description>Endpoint Control and Status Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Generates an IN Packet with Data Previously Written in the DPR</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_DATA_BK0</name>
              <description>Receive Data Bank 0</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RXSETUP</name>
              <description>Received Setup</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>STALLSENT</name>
              <description>Stall Sent</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TXPKTRDY</name>
              <description>Transmit Packet Ready</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FORCESTALL</name>
              <description>Force Stall (used by Control, Bulk and Isochronous Endpoints)</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_DATA_BK1</name>
              <description>Receive Data Bank 1 (only used by endpoints with ping-pong attributes)</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIR</name>
              <description>Transfer Direction (only available for control endpoints)</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPTYPE</name>
              <description>Endpoint Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CTRL</name>
                  <description>Control</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ISO_OUT</name>
                  <description>Isochronous OUT</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BULK_OUT</name>
                  <description>Bulk OUT</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>INT_OUT</name>
                  <description>Interrupt OUT</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ISO_IN</name>
                  <description>Isochronous IN</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BULK_IN</name>
                  <description>Bulk IN</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>INT_IN</name>
                  <description>Interrupt IN</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DTGLE</name>
              <description>Data Toggle</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPEDS</name>
              <description>Endpoint Enable Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RXBYTECNT</name>
              <description>Number of Bytes Available in the FIFO</description>
              <bitOffset>16</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CSR0_ISOENDPT</name>
          <description>Endpoint Control and Status Register</description>
          <alternateGroup>ISOENDPT</alternateGroup>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>TXCOMP</name>
              <description>Generates an IN Packet with Data Previously Written in the DPR</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_DATA_BK0</name>
              <description>Receive Data Bank 0</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RXSETUP</name>
              <description>Received Setup</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ISOERROR</name>
              <description>A CRC error has been detected in an isochronous transfer</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TXPKTRDY</name>
              <description>Transmit Packet Ready</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FORCESTALL</name>
              <description>Force Stall (used by Control, Bulk and Isochronous Endpoints)</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RX_DATA_BK1</name>
              <description>Receive Data Bank 1 (only used by endpoints with ping-pong attributes)</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIR</name>
              <description>Transfer Direction (only available for control endpoints)</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPTYPE</name>
              <description>Endpoint Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CTRL</name>
                  <description>Control</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ISO_OUT</name>
                  <description>Isochronous OUT</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ISO_IN</name>
                  <description>Isochronous IN</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BULK_OUT</name>
                  <description>Bulk OUT</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BULK_IN</name>
                  <description>Bulk IN</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>INT_OUT</name>
                  <description>Interrupt OUT</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>INT_IN</name>
                  <description>Interrupt IN</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DTGLE</name>
              <description>Data Toggle</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EPEDS</name>
              <description>Endpoint Enable Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RXBYTECNT</name>
              <description>Number of Bytes Available in the FIFO</description>
              <bitOffset>16</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>6</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-5</dimIndex>
          <name>FDR[%s]</name>
          <description>Endpoint FIFO Data Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>FIFO_DATA</name>
              <description>FIFO Data Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TXVC</name>
          <description>Transceiver Control Register</description>
          <addressOffset>0x00000074</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000100</resetValue>
          <fields>
            <field>
              <name>TXVDIS</name>
              <description>Transceiver Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PUON</name>
              <description>Pull-up On</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>UART0</name>
      <version>6418E</version>
      <description>Universal Asynchronous Receiver Transmitter 0</description>
      <groupName>UART</groupName>
      <prependToName>UART0_</prependToName>
      <baseAddress>0xF8040000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>UART0</name>
        <value>15</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PAR</name>
              <description>Parity Type</description>
              <bitOffset>9</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>EVEN</name>
                  <description>Even parity</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ODD</name>
                  <description>Odd parity</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPACE</name>
                  <description>Space: parity forced to 0</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MARK</name>
                  <description>Mark: parity forced to 1</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NO</name>
                  <description>No parity</description>
                  <value>0x4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHMODE</name>
              <description>Channel Mode</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AUTOMATIC</name>
                  <description>Automatic Echo</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOCAL_LOOPBACK</name>
                  <description>Local Loopback</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REMOTE_LOOPBACK</name>
                  <description>Remote Loopback</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Enable RXRDY Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Enable TXRDY Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Enable Overrun Error Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Enable Framing Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Enable Parity Error Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Enable TXEMPTY Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Disable RXRDY Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Disable TXRDY Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Disable Overrun Error Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Disable Framing Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Disable Parity Error Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Disable TXEMPTY Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Mask RXRDY Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Disable TXRDY Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Mask Overrun Error Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Mask Framing Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Mask Parity Error Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Mask TXEMPTY Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receive Holding Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCHR</name>
              <description>Received Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmit Holding Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCHR</name>
              <description>Character to be Transmitted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BRGR</name>
          <description>Baud Rate Generator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CD</name>
              <description>Clock Divisor</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>UART1</name>
      <version>6418E</version>
      <description>Universal Asynchronous Receiver Transmitter 1</description>
      <groupName>UART</groupName>
      <prependToName>UART1_</prependToName>
      <baseAddress>0xF8044000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>UART1</name>
        <value>16</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PAR</name>
              <description>Parity Type</description>
              <bitOffset>9</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>EVEN</name>
                  <description>Even parity</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ODD</name>
                  <description>Odd parity</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPACE</name>
                  <description>Space: parity forced to 0</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MARK</name>
                  <description>Mark: parity forced to 1</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NO</name>
                  <description>No parity</description>
                  <value>0x4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHMODE</name>
              <description>Channel Mode</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AUTOMATIC</name>
                  <description>Automatic Echo</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOCAL_LOOPBACK</name>
                  <description>Local Loopback</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REMOTE_LOOPBACK</name>
                  <description>Remote Loopback</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Enable RXRDY Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Enable TXRDY Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Enable Overrun Error Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Enable Framing Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Enable Parity Error Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Enable TXEMPTY Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Disable RXRDY Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Disable TXRDY Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Disable Overrun Error Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Disable Framing Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Disable Parity Error Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Disable TXEMPTY Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Mask RXRDY Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Disable TXRDY Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Mask Overrun Error Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Mask Framing Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Mask Parity Error Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Mask TXEMPTY Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receive Holding Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCHR</name>
              <description>Received Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmit Holding Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCHR</name>
              <description>Character to be Transmitted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BRGR</name>
          <description>Baud Rate Generator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CD</name>
              <description>Clock Divisor</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TRNG</name>
      <version>6334B</version>
      <description>True Random Number Generator</description>
      <prependToName>TRNG_</prependToName>
      <baseAddress>0xF8048000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>TRNG</name>
        <value>30</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enables the TRNG to provide random values</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEY</name>
              <description>Security Key</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DATRDY</name>
              <description>Data Ready Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DATRDY</name>
              <description>Data Ready Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DATRDY</name>
              <description>Data Ready Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DATRDY</name>
              <description>Data Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODATA</name>
          <description>Output Data Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ODATA</name>
              <description>Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>ADC</name>
      <version>6489I</version>
      <description>Analog-to-Digital Converter</description>
      <prependToName>ADC_</prependToName>
      <baseAddress>0xF804C000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ADC</name>
        <value>19</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SWRST</name>
              <description>Software Reset</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>START</name>
              <description>Start Conversion</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TSCALIB</name>
              <description>Touchscreen Calibration</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LOWRES</name>
              <description>Resolution</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BITS_10</name>
                  <description>10-bit resolution</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BITS_8</name>
                  <description>8-bit resolution</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SLEEP</name>
              <description>Sleep Mode</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORMAL</name>
                  <description>Normal Mode: The ADC Core and reference voltage circuitry are kept ON between conversions</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SLEEP</name>
                  <description>Sleep Mode: The ADC Core and reference voltage circuitry are OFF between conversions</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FWUP</name>
              <description>Fast Wake Up</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>OFF</name>
                  <description>Normal Sleep Mode: The sleep mode is defined by the SLEEP bit</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ON</name>
                  <description>Fast Wake Up Sleep Mode: The Voltage reference is ON between conversions and ADC Core is OFF</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRESCAL</name>
              <description>Prescaler Rate Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>STARTUP</name>
              <description>Start Up Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SUT0</name>
                  <description>0 periods of ADCClock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT8</name>
                  <description>8 periods of ADCClock</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT16</name>
                  <description>16 periods of ADCClock</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT24</name>
                  <description>24 periods of ADCClock</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT64</name>
                  <description>64 periods of ADCClock</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT80</name>
                  <description>80 periods of ADCClock</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT96</name>
                  <description>96 periods of ADCClock</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT112</name>
                  <description>112 periods of ADCClock</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT512</name>
                  <description>512 periods of ADCClock</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT576</name>
                  <description>576 periods of ADCClock</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT640</name>
                  <description>640 periods of ADCClock</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT704</name>
                  <description>704 periods of ADCClock</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT768</name>
                  <description>768 periods of ADCClock</description>
                  <value>0xC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT832</name>
                  <description>832 periods of ADCClock</description>
                  <value>0xD</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT896</name>
                  <description>896 periods of ADCClock</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SUT960</name>
                  <description>960 periods of ADCClock</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRACKTIM</name>
              <description>Tracking Time</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USEQ</name>
              <description>Use Sequence Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NUM_ORDER</name>
                  <description>Normal Mode: The controller converts channels in a simple numeric order.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REG_ORDER</name>
                  <description>User Sequence Mode: The sequence respects what is defined in ADC_SEQR1 and ADC_SEQR2 registers.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SEQR1</name>
          <description>Channel Sequence Register 1</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>USCH1</name>
              <description>User Sequence Number 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH2</name>
              <description>User Sequence Number 2</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH3</name>
              <description>User Sequence Number 3</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH4</name>
              <description>User Sequence Number 4</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH5</name>
              <description>User Sequence Number 5</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH6</name>
              <description>User Sequence Number 6</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH7</name>
              <description>User Sequence Number 7</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH8</name>
              <description>User Sequence Number 8</description>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SEQR2</name>
          <description>Channel Sequence Register 2</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>USCH9</name>
              <description>User Sequence Number 9</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH10</name>
              <description>User Sequence Number 10</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH11</name>
              <description>User Sequence Number 11</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH12</name>
              <description>User Sequence Number 12</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH13</name>
              <description>User Sequence Number 13</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH14</name>
              <description>User Sequence Number 14</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH15</name>
              <description>User Sequence Number 15</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USCH16</name>
              <description>User Sequence Number 16</description>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHER</name>
          <description>Channel Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CH0</name>
              <description>Channel 0 Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel 1 Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel 2 Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH3</name>
              <description>Channel 3 Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH4</name>
              <description>Channel 4 Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH5</name>
              <description>Channel 5 Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH6</name>
              <description>Channel 6 Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH7</name>
              <description>Channel 7 Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH8</name>
              <description>Channel 8 Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH9</name>
              <description>Channel 9 Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH10</name>
              <description>Channel 10 Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH11</name>
              <description>Channel 11 Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHDR</name>
          <description>Channel Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>CH0</name>
              <description>Channel 0 Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel 1 Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel 2 Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH3</name>
              <description>Channel 3 Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH4</name>
              <description>Channel 4 Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH5</name>
              <description>Channel 5 Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH6</name>
              <description>Channel 6 Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH7</name>
              <description>Channel 7 Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH8</name>
              <description>Channel 8 Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH9</name>
              <description>Channel 9 Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH10</name>
              <description>Channel 10 Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CH11</name>
              <description>Channel 11 Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHSR</name>
          <description>Channel Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CH0</name>
              <description>Channel 0 Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel 1 Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel 2 Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH3</name>
              <description>Channel 3 Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH4</name>
              <description>Channel 4 Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH5</name>
              <description>Channel 5 Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH6</name>
              <description>Channel 6 Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH7</name>
              <description>Channel 7 Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH8</name>
              <description>Channel 8 Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH9</name>
              <description>Channel 9 Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH10</name>
              <description>Channel 10 Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CH11</name>
              <description>Channel 11 Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LCDR</name>
          <description>Last Converted Data Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LDATA</name>
              <description>Last Data Converted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CHNB</name>
              <description>Channel Number</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>EOC0</name>
              <description>End of Conversion Interrupt Enable 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC1</name>
              <description>End of Conversion Interrupt Enable 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC2</name>
              <description>End of Conversion Interrupt Enable 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC3</name>
              <description>End of Conversion Interrupt Enable 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC4</name>
              <description>End of Conversion Interrupt Enable 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC5</name>
              <description>End of Conversion Interrupt Enable 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC6</name>
              <description>End of Conversion Interrupt Enable 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC7</name>
              <description>End of Conversion Interrupt Enable 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC8</name>
              <description>End of Conversion Interrupt Enable 8</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC9</name>
              <description>End of Conversion Interrupt Enable 9</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC10</name>
              <description>End of Conversion Interrupt Enable 10</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC11</name>
              <description>End of Conversion Interrupt Enable 11</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>XRDY</name>
              <description>Touchscreen Measure XPOS Ready Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>YRDY</name>
              <description>Touchscreen Measure YPOS Ready Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PRDY</name>
              <description>Touchscreen Measure Pressure Ready Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DRDY</name>
              <description>Data Ready Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>GOVRE</name>
              <description>General Overrun Error Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>COMPE</name>
              <description>Comparison Event Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEN</name>
              <description>Pen Contact Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NOPEN</name>
              <description>No Pen Contact Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>EOC0</name>
              <description>End of Conversion Interrupt Disable 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC1</name>
              <description>End of Conversion Interrupt Disable 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC2</name>
              <description>End of Conversion Interrupt Disable 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC3</name>
              <description>End of Conversion Interrupt Disable 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC4</name>
              <description>End of Conversion Interrupt Disable 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC5</name>
              <description>End of Conversion Interrupt Disable 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC6</name>
              <description>End of Conversion Interrupt Disable 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC7</name>
              <description>End of Conversion Interrupt Disable 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC8</name>
              <description>End of Conversion Interrupt Disable 8</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC9</name>
              <description>End of Conversion Interrupt Disable 9</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC10</name>
              <description>End of Conversion Interrupt Disable 10</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EOC11</name>
              <description>End of Conversion Interrupt Disable 11</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>XRDY</name>
              <description>Touchscreen Measure XPOS Ready Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>YRDY</name>
              <description>Touchscreen Measure YPOS Ready Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PRDY</name>
              <description>Touchscreen Measure Pressure Ready Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DRDY</name>
              <description>Data Ready Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>GOVRE</name>
              <description>General Overrun Error Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>COMPE</name>
              <description>Comparison Event Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PEN</name>
              <description>Pen Contact Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>NOPEN</name>
              <description>No Pen Contact Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EOC0</name>
              <description>End of Conversion Interrupt Mask 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC1</name>
              <description>End of Conversion Interrupt Mask 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC2</name>
              <description>End of Conversion Interrupt Mask 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC3</name>
              <description>End of Conversion Interrupt Mask 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC4</name>
              <description>End of Conversion Interrupt Mask 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC5</name>
              <description>End of Conversion Interrupt Mask 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC6</name>
              <description>End of Conversion Interrupt Mask 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC7</name>
              <description>End of Conversion Interrupt Mask 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC8</name>
              <description>End of Conversion Interrupt Mask 8</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC9</name>
              <description>End of Conversion Interrupt Mask 9</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC10</name>
              <description>End of Conversion Interrupt Mask 10</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC11</name>
              <description>End of Conversion Interrupt Mask 11</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>XRDY</name>
              <description>Touchscreen Measure XPOS Ready Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>YRDY</name>
              <description>Touchscreen Measure YPOS Ready Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PRDY</name>
              <description>Touchscreen Measure Pressure Ready Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DRDY</name>
              <description>Data Ready Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>GOVRE</name>
              <description>General Overrun Error Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>COMPE</name>
              <description>Comparison Event Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEN</name>
              <description>Pen Contact Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NOPEN</name>
              <description>No Pen Contact Interrupt Mask</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>EOC0</name>
              <description>End of Conversion 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC1</name>
              <description>End of Conversion 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC2</name>
              <description>End of Conversion 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC3</name>
              <description>End of Conversion 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC4</name>
              <description>End of Conversion 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC5</name>
              <description>End of Conversion 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC6</name>
              <description>End of Conversion 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC7</name>
              <description>End of Conversion 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC8</name>
              <description>End of Conversion 8</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC9</name>
              <description>End of Conversion 9</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC10</name>
              <description>End of Conversion 10</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EOC11</name>
              <description>End of Conversion 11</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>XRDY</name>
              <description>Touchscreen XPOS Measure Ready</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>YRDY</name>
              <description>Touchscreen YPOS Measure Ready</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PRDY</name>
              <description>Touchscreen Pressure Measure Ready</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DRDY</name>
              <description>Data Ready</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>GOVRE</name>
              <description>General Overrun Error</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>COMPE</name>
              <description>Comparison Error</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PEN</name>
              <description>Pen contact</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NOPEN</name>
              <description>No Pen contact</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PENS</name>
              <description>Pen detect Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OVER</name>
          <description>Overrun Status Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>OVRE0</name>
              <description>Overrun Error 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE1</name>
              <description>Overrun Error 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE2</name>
              <description>Overrun Error 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE3</name>
              <description>Overrun Error 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE4</name>
              <description>Overrun Error 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE5</name>
              <description>Overrun Error 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE6</name>
              <description>Overrun Error 6</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE7</name>
              <description>Overrun Error 7</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE8</name>
              <description>Overrun Error 8</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE9</name>
              <description>Overrun Error 9</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE10</name>
              <description>Overrun Error 10</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE11</name>
              <description>Overrun Error 11</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EMR</name>
          <description>Extended Mode Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CMPMODE</name>
              <description>Comparison Mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>LOW</name>
                  <description>Generates an event when the converted data is lower than the low threshold of the window.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HIGH</name>
                  <description>Generates an event when the converted data is higher than the high threshold of the window.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>IN</name>
                  <description>Generates an event when the converted data is in the comparison window.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>OUT</name>
                  <description>Generates an event when the converted data is out of the comparison window.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CMPSEL</name>
              <description>Comparison Selected Channel</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CMPALL</name>
              <description>Compare All Channels</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TAG</name>
              <description>TAG of ADC_LDCR register</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CWR</name>
          <description>Compare Window Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LOWTHRES</name>
              <description>Low Threshold</description>
              <bitOffset>0</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HIGHTHRES</name>
              <description>High Threshold</description>
              <bitOffset>16</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>12</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-11</dimIndex>
          <name>CDR[%s]</name>
          <description>Channel Data Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>DATA</name>
              <description>Converted Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ACR</name>
          <description>Analog Control Register</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000100</resetValue>
          <fields>
            <field>
              <name>PENDETSENS</name>
              <description>Pen Detection Sensitivity</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TSMR</name>
          <description>Touchscreen Mode Register</description>
          <addressOffset>0x000000B0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TSMODE</name>
              <description>Touchscreen Mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>No Touchscreen</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4_WIRE_NO_PM</name>
                  <description>4-wire Touchscreen without pressure measurement</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4_WIRE</name>
                  <description>4-wire Touchscreen with pressure measurement</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>5_WIRE</name>
                  <description>5-wire Touchscreen</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TSAV</name>
              <description>Touchscreen Average</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NO_FILTER</name>
                  <description>No Filtering. Only one ADC conversion per measure</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AVG2CONV</name>
                  <description>Averages 2 ADC conversions</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AVG4CONV</name>
                  <description>Averages 4 ADC conversions</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AVG8CONV</name>
                  <description>Averages 8 ADC conversions</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TSFREQ</name>
              <description>Touchscreen Frequency</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TSSCTIM</name>
              <description>Touchscreen Switches Closure Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NOTSDMA</name>
              <description>No TouchScreen DMA</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PENDET</name>
              <description>Pen Contact Detection Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PENDBC</name>
              <description>Pen Detect Debouncing Period</description>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>XPOSR</name>
          <description>Touchscreen X Position Register</description>
          <addressOffset>0x000000B4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>XPOS</name>
              <description>X Position</description>
              <bitOffset>0</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>XSCALE</name>
              <description>Scale of XPOS</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>YPOSR</name>
          <description>Touchscreen Y Position Register</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>YPOS</name>
              <description>Y Position</description>
              <bitOffset>0</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>YSCALE</name>
              <description>Scale of YPOS</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PRESSR</name>
          <description>Touchscreen Pressure Register</description>
          <addressOffset>0x000000BC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>Z1</name>
              <description>Data of Z1 Measurement</description>
              <bitOffset>0</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>Z2</name>
              <description>Data of Z2 Measurement</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TRGR</name>
          <description>Trigger Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TRGMOD</name>
              <description>Trigger Mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NO_TRIGGER</name>
                  <description>No trigger, only software trigger can start conversions</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EXT_TRIG_RISE</name>
                  <description>External Trigger Rising Edge</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EXT_TRIG_FALL</name>
                  <description>External Trigger Falling Edge</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EXT_TRIG_ANY</name>
                  <description>External Trigger Any Edge</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PEN_TRIG</name>
                  <description>Pen Detect Trigger (shall be selected only if PENDET is set and TSAMOD = Touchscreen only mode)</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PERIOD_TRIG</name>
                  <description>Periodic Trigger (TRGPER shall be initiated appropriately)</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CONTINUOUS</name>
                  <description>Continuous Mode</description>
                  <value>0x6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRGPER</name>
              <description>Trigger Period</description>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>FUSE</name>
      <version>11089B</version>
      <description>Fuse Controller</description>
      <prependToName>FUSE_</prependToName>
      <baseAddress>0xFFFFDC00</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>FUSE</name>
        <value>4</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Fuse Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>WRQ</name>
              <description>Write Request</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RRQ</name>
              <description>Read Request</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>KEY</name>
              <description>Key code</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>VALID</name>
                  <description>valid key.</description>
                  <value>0xFB</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Fuse Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MSK</name>
              <description>Mask Fuse Status Registers</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IR</name>
          <description>Fuse Index Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WS</name>
              <description>Write Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RS</name>
              <description>Read Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WSEL</name>
              <description>Word Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DR</name>
          <description>Fuse Data Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>DATA</name>
              <description>Data to Program</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>10</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-9</dimIndex>
          <name>SR[%s]</name>
          <description>Fuse Status Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>FUSE</name>
              <description>Fuse Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>MATRIX</name>
      <version>11069A</version>
      <description>AHB Bus Matrix</description>
      <prependToName>MATRIX_</prependToName>
      <baseAddress>0xFFFFDE00</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <dim>6</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-5</dimIndex>
          <name>MCFG[%s]</name>
          <description>Master Configuration Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>ULBT</name>
              <description>Undefined Length Burst Type</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>5</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-4</dimIndex>
          <name>SCFG[%s]</name>
          <description>Slave Configuration Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>SLOT_CYCLE</name>
              <description>Maximum Bus Grant Duration for Masters</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DEFMSTR_TYPE</name>
              <description>Default Master Type</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIXED_DEFMSTR</name>
              <description>Fixed Default Master</description>
              <bitOffset>18</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PRAS0</name>
          <description>Priority Register A for Slave 0</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PRAS1</name>
          <description>Priority Register A for Slave 1</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PRAS2</name>
          <description>Priority Register A for Slave 2</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PRAS3</name>
          <description>Priority Register A for Slave 3</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PRAS4</name>
          <description>Priority Register A for Slave 4</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>M0PR</name>
              <description>Master 0 Priority</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M1PR</name>
              <description>Master 1 Priority</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M2PR</name>
              <description>Master 2 Priority</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M3PR</name>
              <description>Master 3 Priority</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M4PR</name>
              <description>Master 4 Priority</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>M5PR</name>
              <description>Master 5 Priority</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MRCR</name>
          <description>Master Remap Control Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RCB0</name>
              <description>Remap Command Bit for Master 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RCB1</name>
              <description>Remap Command Bit for Master 1</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RCB2</name>
              <description>Remap Command Bit for Master 2</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RCB3</name>
              <description>Remap Command Bit for Master 3</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RCB4</name>
              <description>Remap Command Bit for Master 4</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RCB5</name>
              <description>Remap Command Bit for Master 5</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000001E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect ENable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY (Write-only)</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000001E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PMECC</name>
      <version>11038D</version>
      <description>Programmable Multibit Error Corrected Code Controller</description>
      <groupName>EBI</groupName>
      <prependToName>PMECC_</prependToName>
      <baseAddress>0xFFFFE000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x600</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CFG</name>
          <description>PMECC Configuration Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BCH_ERR</name>
              <description>Error Correct Capability</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BCH_ERR2</name>
                  <description>2 errors</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BCH_ERR4</name>
                  <description>4 errors</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BCH_ERR8</name>
                  <description>8 errors</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BCH_ERR12</name>
                  <description>12 errors</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BCH_ERR24</name>
                  <description>24 errors</description>
                  <value>0x4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SECTORSZ</name>
              <description>Sector Size</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PAGESIZE</name>
              <description>Number of Sectors in the Page</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PAGESIZE_1SEC</name>
                  <description>1 sector for main area (512 or 1024 bytes)</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PAGESIZE_2SEC</name>
                  <description>2 sectors for main area (1024 or 2048 bytes)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PAGESIZE_4SEC</name>
                  <description>4 sectors for main area (2048 or 4096 bytes)</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PAGESIZE_8SEC</name>
                  <description>8 errors for main area (4096 or 8192 bytes)</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NANDWR</name>
              <description>NAND Write Access</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPAREEN</name>
              <description>Spare Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>AUTO</name>
              <description>Automatic Mode Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SAREA</name>
          <description>PMECC Spare Area Size Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SPARESIZE</name>
              <description>Spare Area Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR</name>
          <description>PMECC Start Address Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>STARTADDR</name>
              <description>ECC Area Start Address (byte oriented address)</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EADDR</name>
          <description>PMECC End Address Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENDADDR</name>
              <description>ECC Area End Address (byte oriented address)</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CLK</name>
          <description>PMECC Clock Control Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CLKCTRL</name>
              <description>Clock Control Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRL</name>
          <description>PMECC Control Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RST</name>
              <description>Reset the PMECC Module</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DATA</name>
              <description>Start a Data Phase</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>USER</name>
              <description>Start a User Mode Phase</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENABLE</name>
              <description>PMECC Module Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DISABLE</name>
              <description>PMECC Module Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>PMECC Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUSY</name>
              <description>The Kernel of the PMECC is Busy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENABLE</name>
              <description>PMECC Module Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>PMECC Interrupt Enable register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ERRIE</name>
              <description>Error Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>PMECC Interrupt Disable Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>ERRID</name>
              <description>Error Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>PMECC Interrupt Mask Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ERRIM</name>
              <description>Error Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>PMECC Interrupt Status Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ERRIS</name>
              <description>Error Interrupt Status Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC0_0</name>
          <description>PMECC ECC 0 Register (sec_num = 0)</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC1_0</name>
          <description>PMECC ECC 1 Register (sec_num = 0)</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC2_0</name>
          <description>PMECC ECC 2 Register (sec_num = 0)</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC3_0</name>
          <description>PMECC ECC 3 Register (sec_num = 0)</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC4_0</name>
          <description>PMECC ECC 4 Register (sec_num = 0)</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC5_0</name>
          <description>PMECC ECC 5 Register (sec_num = 0)</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC6_0</name>
          <description>PMECC ECC 6 Register (sec_num = 0)</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC7_0</name>
          <description>PMECC ECC 7 Register (sec_num = 0)</description>
          <addressOffset>0x0000005C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC8_0</name>
          <description>PMECC ECC 8 Register (sec_num = 0)</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC9_0</name>
          <description>PMECC ECC 9 Register (sec_num = 0)</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC10_0</name>
          <description>PMECC ECC 10 Register (sec_num = 0)</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC0_1</name>
          <description>PMECC ECC 0 Register (sec_num = 1)</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC1_1</name>
          <description>PMECC ECC 1 Register (sec_num = 1)</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC2_1</name>
          <description>PMECC ECC 2 Register (sec_num = 1)</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC3_1</name>
          <description>PMECC ECC 3 Register (sec_num = 1)</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC4_1</name>
          <description>PMECC ECC 4 Register (sec_num = 1)</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC5_1</name>
          <description>PMECC ECC 5 Register (sec_num = 1)</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC6_1</name>
          <description>PMECC ECC 6 Register (sec_num = 1)</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC7_1</name>
          <description>PMECC ECC 7 Register (sec_num = 1)</description>
          <addressOffset>0x0000009C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC8_1</name>
          <description>PMECC ECC 8 Register (sec_num = 1)</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC9_1</name>
          <description>PMECC ECC 9 Register (sec_num = 1)</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC10_1</name>
          <description>PMECC ECC 10 Register (sec_num = 1)</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC0_2</name>
          <description>PMECC ECC 0 Register (sec_num = 2)</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC1_2</name>
          <description>PMECC ECC 1 Register (sec_num = 2)</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC2_2</name>
          <description>PMECC ECC 2 Register (sec_num = 2)</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC3_2</name>
          <description>PMECC ECC 3 Register (sec_num = 2)</description>
          <addressOffset>0x000000CC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC4_2</name>
          <description>PMECC ECC 4 Register (sec_num = 2)</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC5_2</name>
          <description>PMECC ECC 5 Register (sec_num = 2)</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC6_2</name>
          <description>PMECC ECC 6 Register (sec_num = 2)</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC7_2</name>
          <description>PMECC ECC 7 Register (sec_num = 2)</description>
          <addressOffset>0x000000DC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC8_2</name>
          <description>PMECC ECC 8 Register (sec_num = 2)</description>
          <addressOffset>0x000000E0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC9_2</name>
          <description>PMECC ECC 9 Register (sec_num = 2)</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC10_2</name>
          <description>PMECC ECC 10 Register (sec_num = 2)</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC0_3</name>
          <description>PMECC ECC 0 Register (sec_num = 3)</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC1_3</name>
          <description>PMECC ECC 1 Register (sec_num = 3)</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC2_3</name>
          <description>PMECC ECC 2 Register (sec_num = 3)</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC3_3</name>
          <description>PMECC ECC 3 Register (sec_num = 3)</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC4_3</name>
          <description>PMECC ECC 4 Register (sec_num = 3)</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC5_3</name>
          <description>PMECC ECC 5 Register (sec_num = 3)</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC6_3</name>
          <description>PMECC ECC 6 Register (sec_num = 3)</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC7_3</name>
          <description>PMECC ECC 7 Register (sec_num = 3)</description>
          <addressOffset>0x0000011C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC8_3</name>
          <description>PMECC ECC 8 Register (sec_num = 3)</description>
          <addressOffset>0x00000120</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC9_3</name>
          <description>PMECC ECC 9 Register (sec_num = 3)</description>
          <addressOffset>0x00000124</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC10_3</name>
          <description>PMECC ECC 10 Register (sec_num = 3)</description>
          <addressOffset>0x00000128</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC0_4</name>
          <description>PMECC ECC 0 Register (sec_num = 4)</description>
          <addressOffset>0x00000140</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC1_4</name>
          <description>PMECC ECC 1 Register (sec_num = 4)</description>
          <addressOffset>0x00000144</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC2_4</name>
          <description>PMECC ECC 2 Register (sec_num = 4)</description>
          <addressOffset>0x00000148</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC3_4</name>
          <description>PMECC ECC 3 Register (sec_num = 4)</description>
          <addressOffset>0x0000014C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC4_4</name>
          <description>PMECC ECC 4 Register (sec_num = 4)</description>
          <addressOffset>0x00000150</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC5_4</name>
          <description>PMECC ECC 5 Register (sec_num = 4)</description>
          <addressOffset>0x00000154</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC6_4</name>
          <description>PMECC ECC 6 Register (sec_num = 4)</description>
          <addressOffset>0x00000158</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC7_4</name>
          <description>PMECC ECC 7 Register (sec_num = 4)</description>
          <addressOffset>0x0000015C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC8_4</name>
          <description>PMECC ECC 8 Register (sec_num = 4)</description>
          <addressOffset>0x00000160</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC9_4</name>
          <description>PMECC ECC 9 Register (sec_num = 4)</description>
          <addressOffset>0x00000164</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC10_4</name>
          <description>PMECC ECC 10 Register (sec_num = 4)</description>
          <addressOffset>0x00000168</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC0_5</name>
          <description>PMECC ECC 0 Register (sec_num = 5)</description>
          <addressOffset>0x00000180</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC1_5</name>
          <description>PMECC ECC 1 Register (sec_num = 5)</description>
          <addressOffset>0x00000184</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC2_5</name>
          <description>PMECC ECC 2 Register (sec_num = 5)</description>
          <addressOffset>0x00000188</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC3_5</name>
          <description>PMECC ECC 3 Register (sec_num = 5)</description>
          <addressOffset>0x0000018C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC4_5</name>
          <description>PMECC ECC 4 Register (sec_num = 5)</description>
          <addressOffset>0x00000190</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC5_5</name>
          <description>PMECC ECC 5 Register (sec_num = 5)</description>
          <addressOffset>0x00000194</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC6_5</name>
          <description>PMECC ECC 6 Register (sec_num = 5)</description>
          <addressOffset>0x00000198</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC7_5</name>
          <description>PMECC ECC 7 Register (sec_num = 5)</description>
          <addressOffset>0x0000019C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC8_5</name>
          <description>PMECC ECC 8 Register (sec_num = 5)</description>
          <addressOffset>0x000001A0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC9_5</name>
          <description>PMECC ECC 9 Register (sec_num = 5)</description>
          <addressOffset>0x000001A4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC10_5</name>
          <description>PMECC ECC 10 Register (sec_num = 5)</description>
          <addressOffset>0x000001A8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC0_6</name>
          <description>PMECC ECC 0 Register (sec_num = 6)</description>
          <addressOffset>0x000001C0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC1_6</name>
          <description>PMECC ECC 1 Register (sec_num = 6)</description>
          <addressOffset>0x000001C4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC2_6</name>
          <description>PMECC ECC 2 Register (sec_num = 6)</description>
          <addressOffset>0x000001C8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC3_6</name>
          <description>PMECC ECC 3 Register (sec_num = 6)</description>
          <addressOffset>0x000001CC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC4_6</name>
          <description>PMECC ECC 4 Register (sec_num = 6)</description>
          <addressOffset>0x000001D0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC5_6</name>
          <description>PMECC ECC 5 Register (sec_num = 6)</description>
          <addressOffset>0x000001D4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC6_6</name>
          <description>PMECC ECC 6 Register (sec_num = 6)</description>
          <addressOffset>0x000001D8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC7_6</name>
          <description>PMECC ECC 7 Register (sec_num = 6)</description>
          <addressOffset>0x000001DC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC8_6</name>
          <description>PMECC ECC 8 Register (sec_num = 6)</description>
          <addressOffset>0x000001E0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC9_6</name>
          <description>PMECC ECC 9 Register (sec_num = 6)</description>
          <addressOffset>0x000001E4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC10_6</name>
          <description>PMECC ECC 10 Register (sec_num = 6)</description>
          <addressOffset>0x000001E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC0_7</name>
          <description>PMECC ECC 0 Register (sec_num = 7)</description>
          <addressOffset>0x00000200</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC1_7</name>
          <description>PMECC ECC 1 Register (sec_num = 7)</description>
          <addressOffset>0x00000204</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC2_7</name>
          <description>PMECC ECC 2 Register (sec_num = 7)</description>
          <addressOffset>0x00000208</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC3_7</name>
          <description>PMECC ECC 3 Register (sec_num = 7)</description>
          <addressOffset>0x0000020C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC4_7</name>
          <description>PMECC ECC 4 Register (sec_num = 7)</description>
          <addressOffset>0x00000210</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC5_7</name>
          <description>PMECC ECC 5 Register (sec_num = 7)</description>
          <addressOffset>0x00000214</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC6_7</name>
          <description>PMECC ECC 6 Register (sec_num = 7)</description>
          <addressOffset>0x00000218</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC7_7</name>
          <description>PMECC ECC 7 Register (sec_num = 7)</description>
          <addressOffset>0x0000021C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC8_7</name>
          <description>PMECC ECC 8 Register (sec_num = 7)</description>
          <addressOffset>0x00000220</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC9_7</name>
          <description>PMECC ECC 9 Register (sec_num = 7)</description>
          <addressOffset>0x00000224</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ECC10_7</name>
          <description>PMECC ECC 10 Register (sec_num = 7)</description>
          <addressOffset>0x00000228</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ECC</name>
              <description>BCH Redundancy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM0_0</name>
          <description>PMECC REM 0 Register (sec_num = 0)</description>
          <addressOffset>0x00000240</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM1_0</name>
          <description>PMECC REM 1 Register (sec_num = 0)</description>
          <addressOffset>0x00000244</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM2_0</name>
          <description>PMECC REM 2 Register (sec_num = 0)</description>
          <addressOffset>0x00000248</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM3_0</name>
          <description>PMECC REM 3 Register (sec_num = 0)</description>
          <addressOffset>0x0000024C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM4_0</name>
          <description>PMECC REM 4 Register (sec_num = 0)</description>
          <addressOffset>0x00000250</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM5_0</name>
          <description>PMECC REM 5 Register (sec_num = 0)</description>
          <addressOffset>0x00000254</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM6_0</name>
          <description>PMECC REM 6 Register (sec_num = 0)</description>
          <addressOffset>0x00000258</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM7_0</name>
          <description>PMECC REM 7 Register (sec_num = 0)</description>
          <addressOffset>0x0000025C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM8_0</name>
          <description>PMECC REM 8 Register (sec_num = 0)</description>
          <addressOffset>0x00000260</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM9_0</name>
          <description>PMECC REM 9 Register (sec_num = 0)</description>
          <addressOffset>0x00000264</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM10_0</name>
          <description>PMECC REM 10 Register (sec_num = 0)</description>
          <addressOffset>0x00000268</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM11_0</name>
          <description>PMECC REM 11 Register (sec_num = 0)</description>
          <addressOffset>0x0000026C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM0_1</name>
          <description>PMECC REM 0 Register (sec_num = 1)</description>
          <addressOffset>0x00000280</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM1_1</name>
          <description>PMECC REM 1 Register (sec_num = 1)</description>
          <addressOffset>0x00000284</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM2_1</name>
          <description>PMECC REM 2 Register (sec_num = 1)</description>
          <addressOffset>0x00000288</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM3_1</name>
          <description>PMECC REM 3 Register (sec_num = 1)</description>
          <addressOffset>0x0000028C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM4_1</name>
          <description>PMECC REM 4 Register (sec_num = 1)</description>
          <addressOffset>0x00000290</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM5_1</name>
          <description>PMECC REM 5 Register (sec_num = 1)</description>
          <addressOffset>0x00000294</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM6_1</name>
          <description>PMECC REM 6 Register (sec_num = 1)</description>
          <addressOffset>0x00000298</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM7_1</name>
          <description>PMECC REM 7 Register (sec_num = 1)</description>
          <addressOffset>0x0000029C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM8_1</name>
          <description>PMECC REM 8 Register (sec_num = 1)</description>
          <addressOffset>0x000002A0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM9_1</name>
          <description>PMECC REM 9 Register (sec_num = 1)</description>
          <addressOffset>0x000002A4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM10_1</name>
          <description>PMECC REM 10 Register (sec_num = 1)</description>
          <addressOffset>0x000002A8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM11_1</name>
          <description>PMECC REM 11 Register (sec_num = 1)</description>
          <addressOffset>0x000002AC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM0_2</name>
          <description>PMECC REM 0 Register (sec_num = 2)</description>
          <addressOffset>0x000002C0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM1_2</name>
          <description>PMECC REM 1 Register (sec_num = 2)</description>
          <addressOffset>0x000002C4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM2_2</name>
          <description>PMECC REM 2 Register (sec_num = 2)</description>
          <addressOffset>0x000002C8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM3_2</name>
          <description>PMECC REM 3 Register (sec_num = 2)</description>
          <addressOffset>0x000002CC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM4_2</name>
          <description>PMECC REM 4 Register (sec_num = 2)</description>
          <addressOffset>0x000002D0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM5_2</name>
          <description>PMECC REM 5 Register (sec_num = 2)</description>
          <addressOffset>0x000002D4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM6_2</name>
          <description>PMECC REM 6 Register (sec_num = 2)</description>
          <addressOffset>0x000002D8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM7_2</name>
          <description>PMECC REM 7 Register (sec_num = 2)</description>
          <addressOffset>0x000002DC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM8_2</name>
          <description>PMECC REM 8 Register (sec_num = 2)</description>
          <addressOffset>0x000002E0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM9_2</name>
          <description>PMECC REM 9 Register (sec_num = 2)</description>
          <addressOffset>0x000002E4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM10_2</name>
          <description>PMECC REM 10 Register (sec_num = 2)</description>
          <addressOffset>0x000002E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM11_2</name>
          <description>PMECC REM 11 Register (sec_num = 2)</description>
          <addressOffset>0x000002EC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM0_3</name>
          <description>PMECC REM 0 Register (sec_num = 3)</description>
          <addressOffset>0x00000300</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM1_3</name>
          <description>PMECC REM 1 Register (sec_num = 3)</description>
          <addressOffset>0x00000304</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM2_3</name>
          <description>PMECC REM 2 Register (sec_num = 3)</description>
          <addressOffset>0x00000308</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM3_3</name>
          <description>PMECC REM 3 Register (sec_num = 3)</description>
          <addressOffset>0x0000030C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM4_3</name>
          <description>PMECC REM 4 Register (sec_num = 3)</description>
          <addressOffset>0x00000310</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM5_3</name>
          <description>PMECC REM 5 Register (sec_num = 3)</description>
          <addressOffset>0x00000314</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM6_3</name>
          <description>PMECC REM 6 Register (sec_num = 3)</description>
          <addressOffset>0x00000318</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM7_3</name>
          <description>PMECC REM 7 Register (sec_num = 3)</description>
          <addressOffset>0x0000031C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM8_3</name>
          <description>PMECC REM 8 Register (sec_num = 3)</description>
          <addressOffset>0x00000320</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM9_3</name>
          <description>PMECC REM 9 Register (sec_num = 3)</description>
          <addressOffset>0x00000324</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM10_3</name>
          <description>PMECC REM 10 Register (sec_num = 3)</description>
          <addressOffset>0x00000328</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM11_3</name>
          <description>PMECC REM 11 Register (sec_num = 3)</description>
          <addressOffset>0x0000032C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM0_4</name>
          <description>PMECC REM 0 Register (sec_num = 4)</description>
          <addressOffset>0x00000340</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM1_4</name>
          <description>PMECC REM 1 Register (sec_num = 4)</description>
          <addressOffset>0x00000344</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM2_4</name>
          <description>PMECC REM 2 Register (sec_num = 4)</description>
          <addressOffset>0x00000348</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM3_4</name>
          <description>PMECC REM 3 Register (sec_num = 4)</description>
          <addressOffset>0x0000034C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM4_4</name>
          <description>PMECC REM 4 Register (sec_num = 4)</description>
          <addressOffset>0x00000350</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM5_4</name>
          <description>PMECC REM 5 Register (sec_num = 4)</description>
          <addressOffset>0x00000354</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM6_4</name>
          <description>PMECC REM 6 Register (sec_num = 4)</description>
          <addressOffset>0x00000358</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM7_4</name>
          <description>PMECC REM 7 Register (sec_num = 4)</description>
          <addressOffset>0x0000035C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM8_4</name>
          <description>PMECC REM 8 Register (sec_num = 4)</description>
          <addressOffset>0x00000360</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM9_4</name>
          <description>PMECC REM 9 Register (sec_num = 4)</description>
          <addressOffset>0x00000364</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM10_4</name>
          <description>PMECC REM 10 Register (sec_num = 4)</description>
          <addressOffset>0x00000368</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM11_4</name>
          <description>PMECC REM 11 Register (sec_num = 4)</description>
          <addressOffset>0x0000036C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM0_5</name>
          <description>PMECC REM 0 Register (sec_num = 5)</description>
          <addressOffset>0x00000380</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM1_5</name>
          <description>PMECC REM 1 Register (sec_num = 5)</description>
          <addressOffset>0x00000384</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM2_5</name>
          <description>PMECC REM 2 Register (sec_num = 5)</description>
          <addressOffset>0x00000388</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM3_5</name>
          <description>PMECC REM 3 Register (sec_num = 5)</description>
          <addressOffset>0x0000038C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM4_5</name>
          <description>PMECC REM 4 Register (sec_num = 5)</description>
          <addressOffset>0x00000390</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM5_5</name>
          <description>PMECC REM 5 Register (sec_num = 5)</description>
          <addressOffset>0x00000394</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM6_5</name>
          <description>PMECC REM 6 Register (sec_num = 5)</description>
          <addressOffset>0x00000398</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM7_5</name>
          <description>PMECC REM 7 Register (sec_num = 5)</description>
          <addressOffset>0x0000039C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM8_5</name>
          <description>PMECC REM 8 Register (sec_num = 5)</description>
          <addressOffset>0x000003A0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM9_5</name>
          <description>PMECC REM 9 Register (sec_num = 5)</description>
          <addressOffset>0x000003A4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM10_5</name>
          <description>PMECC REM 10 Register (sec_num = 5)</description>
          <addressOffset>0x000003A8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM11_5</name>
          <description>PMECC REM 11 Register (sec_num = 5)</description>
          <addressOffset>0x000003AC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM0_6</name>
          <description>PMECC REM 0 Register (sec_num = 6)</description>
          <addressOffset>0x000003C0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM1_6</name>
          <description>PMECC REM 1 Register (sec_num = 6)</description>
          <addressOffset>0x000003C4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM2_6</name>
          <description>PMECC REM 2 Register (sec_num = 6)</description>
          <addressOffset>0x000003C8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM3_6</name>
          <description>PMECC REM 3 Register (sec_num = 6)</description>
          <addressOffset>0x000003CC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM4_6</name>
          <description>PMECC REM 4 Register (sec_num = 6)</description>
          <addressOffset>0x000003D0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM5_6</name>
          <description>PMECC REM 5 Register (sec_num = 6)</description>
          <addressOffset>0x000003D4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM6_6</name>
          <description>PMECC REM 6 Register (sec_num = 6)</description>
          <addressOffset>0x000003D8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM7_6</name>
          <description>PMECC REM 7 Register (sec_num = 6)</description>
          <addressOffset>0x000003DC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM8_6</name>
          <description>PMECC REM 8 Register (sec_num = 6)</description>
          <addressOffset>0x000003E0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM9_6</name>
          <description>PMECC REM 9 Register (sec_num = 6)</description>
          <addressOffset>0x000003E4</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM10_6</name>
          <description>PMECC REM 10 Register (sec_num = 6)</description>
          <addressOffset>0x000003E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM11_6</name>
          <description>PMECC REM 11 Register (sec_num = 6)</description>
          <addressOffset>0x000003EC</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM0_7</name>
          <description>PMECC REM 0 Register (sec_num = 7)</description>
          <addressOffset>0x00000400</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM1_7</name>
          <description>PMECC REM 1 Register (sec_num = 7)</description>
          <addressOffset>0x00000404</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM2_7</name>
          <description>PMECC REM 2 Register (sec_num = 7)</description>
          <addressOffset>0x00000408</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM3_7</name>
          <description>PMECC REM 3 Register (sec_num = 7)</description>
          <addressOffset>0x0000040C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM4_7</name>
          <description>PMECC REM 4 Register (sec_num = 7)</description>
          <addressOffset>0x00000410</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM5_7</name>
          <description>PMECC REM 5 Register (sec_num = 7)</description>
          <addressOffset>0x00000414</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM6_7</name>
          <description>PMECC REM 6 Register (sec_num = 7)</description>
          <addressOffset>0x00000418</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM7_7</name>
          <description>PMECC REM 7 Register (sec_num = 7)</description>
          <addressOffset>0x0000041C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM8_7</name>
          <description>PMECC REM 8 Register (sec_num = 7)</description>
          <addressOffset>0x00000420</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM9_7</name>
          <description>PMECC REM 9 Register (sec_num = 7)</description>
          <addressOffset>0x00000424</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM10_7</name>
          <description>PMECC REM 10 Register (sec_num = 7)</description>
          <addressOffset>0x00000428</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REM11_7</name>
          <description>PMECC REM 11 Register (sec_num = 7)</description>
          <addressOffset>0x0000042C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>REM2NP1</name>
              <description>BCH Remainder 2 * N + 1</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>REM2NP3</name>
              <description>BCH Remainder 2 * N + 3</description>
              <bitOffset>16</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PMERRLOC</name>
      <version>11039D</version>
      <description>Programmable Multibit ECC Error Location</description>
      <groupName>EBI</groupName>
      <prependToName>PMERRLOC_</prependToName>
      <baseAddress>0xFFFFE600</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>ELCFG</name>
          <description>Error Location Configuration Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SECTORSZ</name>
              <description>Sector Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ERRNUM</name>
              <description>Number of Errors</description>
              <bitOffset>16</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELPRIM</name>
          <description>Error Location Primitive Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PRIMITIV</name>
              <description>Primitive Polynomial</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELEN</name>
          <description>Error Location Enable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENINIT</name>
              <description>Initial Number of Bits in the Codeword</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELDIS</name>
          <description>Error Location Disable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIS</name>
              <description>Disable Error Location Engine</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELSR</name>
          <description>Error Location Status Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BUSY</name>
              <description>Error Location Engine Busy</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELIER</name>
          <description>Error Location Interrupt Enable register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DONE</name>
              <description>Computation Terminated Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELIDR</name>
          <description>Error Location Interrupt Disable Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DONE</name>
              <description>Computation Terminated Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELIMR</name>
          <description>Error Location Interrupt Mask Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DONE</name>
              <description>Computation Terminated Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELISR</name>
          <description>Error Location Interrupt Status Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DONE</name>
              <description>Computation Terminated Interrupt Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR_CNT</name>
              <description>Error Counter value</description>
              <bitOffset>8</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>25</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-24</dimIndex>
          <name>SIGMA[%s]</name>
          <description>PMECC SIGMA 0 Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>SIGMAN</name>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>24</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-23</dimIndex>
          <name>EL[%s]</name>
          <description>PMECC Error Location 0 Register</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>ERRLOCN</name>
              <description>Error Position within the set {sector area, spare area}.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>DDRSDRC</name>
      <version>6304S</version>
      <description>DDR_SDR SDRAM Controller</description>
      <groupName>EBI</groupName>
      <prependToName>DDRSDRC_</prependToName>
      <baseAddress>0xFFFFE800</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>MR</name>
          <description>DDRSDRC Mode Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MODE</name>
              <description>DDRSDRC Command Mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RTR</name>
          <description>DDRSDRC Refresh Timer Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>COUNT</name>
              <description>DDRSDRC Refresh Timer Count</description>
              <bitOffset>0</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CR</name>
          <description>DDRSDRC Configuration Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00007024</resetValue>
          <fields>
            <field>
              <name>NC</name>
              <description>Number of Column Bits</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NR</name>
              <description>Number of Row Bits</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CAS</name>
              <description>CAS Latency</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLL</name>
              <description>Reset DLL</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIC</name>
              <description>Output Driver Impedance Control</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIS_DLL</name>
              <description>Disable DLL</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OCD</name>
              <description>Off-chip Driver</description>
              <bitOffset>12</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EBISHARE</name>
              <description>External Bus Interface is Shared</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>ACTBST</name>
              <description>ACTIVE Bank X to Burst Stop Read Access Bank Y</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NB</name>
              <description>Number of Banks</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DECOD</name>
              <description>Type of Decoding</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TPR0</name>
          <description>DDRSDRC Timing Parameter 0 Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x20227225</resetValue>
          <fields>
            <field>
              <name>TRAS</name>
              <description>Active to Precharge Delay</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRCD</name>
              <description>Row to Column Delay</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TWR</name>
              <description>Write Recovery Delay</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRC</name>
              <description>Row Cycle Delay</description>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRP</name>
              <description>Row Precharge Delay</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRRD</name>
              <description>Active bankA to Active bankB</description>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TWTR</name>
              <description>Internal Write to Read Delay</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>REDUCE_WRRD</name>
              <description>Reduce Write to Read Delay</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TMRD</name>
              <description>Load Mode Register Command to Active or Refresh Command</description>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TPR1</name>
          <description>DDRSDRC Timing Parameter 1 Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x03C80808</resetValue>
          <fields>
            <field>
              <name>TRFC</name>
              <description>Row Cycle Delay</description>
              <bitOffset>0</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TXSNR</name>
              <description>Exit Self Refresh Delay to Non-read Command</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TXSRD</name>
              <description>ExiT Self Refresh Delay to Read Command</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TXP</name>
              <description>Exit Power-down Delay to First Command</description>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TPR2</name>
          <description>DDRSDRC Timing Parameter 2 Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00002062</resetValue>
          <fields>
            <field>
              <name>TXARD</name>
              <description>Exit Active Power Down Delay to Read Command in Mode "Fast Exit".</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TXARDS</name>
              <description>Exit Active Power Down Delay to Read Command in Mode "Slow Exit".</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRPA</name>
              <description>Row Precharge All Delay</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TRTP</name>
              <description>Read to Precharge</description>
              <bitOffset>12</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TFAW</name>
              <description>Four Active window</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LPR</name>
          <description>DDRSDRC Low-power Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00010000</resetValue>
          <fields>
            <field>
              <name>LPCB</name>
              <description>Low-power Command Bit</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CLK_FR</name>
              <description>Clock Frozen Command Bit</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PASR</name>
              <description>Partial Array Self Refresh</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DS</name>
              <description>Drive Strength</description>
              <bitOffset>8</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TIMEOUT</name>
              <description>Low Power Mode</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>APDE</name>
              <description>Active Power Down Exit Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>UPD_MR</name>
              <description>Update Load Mode Register and Extended Mode Register</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MD</name>
          <description>DDRSDRC Memory Device Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000010</resetValue>
          <fields>
            <field>
              <name>MD</name>
              <description>Memory Device</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DLL</name>
          <description>DDRSDRC DLL Information Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>MDINC</name>
              <description>DLL Master Delay Increment</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDDEC</name>
              <description>DLL Master Delay Decrement</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDOVF</name>
              <description>DLL Master Delay Overflow Flag</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MDVAL</name>
              <description>DLL Master Delay Value</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>HS</name>
          <description>DDRSDRC High Speed Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIS_ANTICIP_READ</name>
              <description>Anticip Read Access</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>DDRSDRC Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>DDRSDRC Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SMC</name>
      <version>6105I</version>
      <description>Static Memory Controller</description>
      <groupName>EBI</groupName>
      <prependToName>SMC_</prependToName>
      <baseAddress>0xFFFFEA00</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>SETUP0</name>
          <description>SMC Setup Register (CS_number = 0)</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE0</name>
          <description>SMC Pulse Register (CS_number = 0)</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE0</name>
          <description>SMC Cycle Register (CS_number = 0)</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE0</name>
          <description>SMC Mode Register (CS_number = 0)</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10001000</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PMEN</name>
              <description>Page Mode Enabled</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PS</name>
              <description>Page Size</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SETUP1</name>
          <description>SMC Setup Register (CS_number = 1)</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE1</name>
          <description>SMC Pulse Register (CS_number = 1)</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE1</name>
          <description>SMC Cycle Register (CS_number = 1)</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE1</name>
          <description>SMC Mode Register (CS_number = 1)</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10001000</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PMEN</name>
              <description>Page Mode Enabled</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PS</name>
              <description>Page Size</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SETUP2</name>
          <description>SMC Setup Register (CS_number = 2)</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE2</name>
          <description>SMC Pulse Register (CS_number = 2)</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE2</name>
          <description>SMC Cycle Register (CS_number = 2)</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE2</name>
          <description>SMC Mode Register (CS_number = 2)</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10001000</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PMEN</name>
              <description>Page Mode Enabled</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PS</name>
              <description>Page Size</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SETUP3</name>
          <description>SMC Setup Register (CS_number = 3)</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE3</name>
          <description>SMC Pulse Register (CS_number = 3)</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE3</name>
          <description>SMC Cycle Register (CS_number = 3)</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE3</name>
          <description>SMC Mode Register (CS_number = 3)</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10001000</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PMEN</name>
              <description>Page Mode Enabled</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PS</name>
              <description>Page Size</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SETUP4</name>
          <description>SMC Setup Register (CS_number = 4)</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE4</name>
          <description>SMC Pulse Register (CS_number = 4)</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE4</name>
          <description>SMC Cycle Register (CS_number = 4)</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE4</name>
          <description>SMC Mode Register (CS_number = 4)</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10001000</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PMEN</name>
              <description>Page Mode Enabled</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PS</name>
              <description>Page Size</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SETUP5</name>
          <description>SMC Setup Register (CS_number = 5)</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NWE_SETUP</name>
              <description>NWE Setup Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_SETUP</name>
              <description>NCS Setup Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_SETUP</name>
              <description>NRD Setup Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_SETUP</name>
              <description>NCS Setup Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PULSE5</name>
          <description>SMC Pulse Register (CS_number = 5)</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010101</resetValue>
          <fields>
            <field>
              <name>NWE_PULSE</name>
              <description>NWE Pulse Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_WR_PULSE</name>
              <description>NCS Pulse Length in WRITE Access</description>
              <bitOffset>8</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_PULSE</name>
              <description>NRD Pulse Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NCS_RD_PULSE</name>
              <description>NCS Pulse Length in READ Access</description>
              <bitOffset>24</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CYCLE5</name>
          <description>SMC Cycle Register (CS_number = 5)</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00030003</resetValue>
          <fields>
            <field>
              <name>NWE_CYCLE</name>
              <description>Total Write Cycle Length</description>
              <bitOffset>0</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>NRD_CYCLE</name>
              <description>Total Read Cycle Length</description>
              <bitOffset>16</bitOffset>
              <bitWidth>9</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE5</name>
          <description>SMC Mode Register (CS_number = 5)</description>
          <addressOffset>0x0000005C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x10001000</resetValue>
          <fields>
            <field>
              <name>READ_MODE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WRITE_MODE</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>EXNW_MODE</name>
              <description>NWAIT Mode</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BAT</name>
              <description>Byte Access Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DBW</name>
              <description>Data Bus Width</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_CYCLES</name>
              <description>Data Float Time</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TDF_MODE</name>
              <description>TDF Optimization</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PMEN</name>
              <description>Page Mode Enabled</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PS</name>
              <description>Page Size</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DELAY1</name>
          <description>SMC Delay on I/O</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>Delay1</name>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay2</name>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay3</name>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay4</name>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay5</name>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay6</name>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay7</name>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay8</name>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DELAY2</name>
          <description>SMC Delay on I/O</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>DELAY3</name>
          <description>SMC Delay on I/O</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>DELAY4</name>
          <description>SMC Delay on I/O</description>
          <addressOffset>0x000000CC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>DELAY5</name>
          <description>SMC Delay on I/O</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>DELAY6</name>
          <description>SMC Delay on I/O</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>DELAY7</name>
          <description>SMC Delay on I/O</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>DELAY8</name>
          <description>SMC Delay on I/O</description>
          <addressOffset>0x000000DC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
        </register>
        <register>
          <name>WPMR</name>
          <description>SMC Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>SMC Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>DMAC</name>
      <version>6233K</version>
      <description>DMA Controller</description>
      <prependToName>DMAC_</prependToName>
      <baseAddress>0xFFFFEC00</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>DMAC</name>
        <value>20</value>
      </interrupt>
      <registers>
        <register>
          <name>GCFG</name>
          <description>DMAC Global Configuration Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000010</resetValue>
          <fields>
            <field>
              <name>ARB_CFG</name>
              <description>Arbiter Configuration</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>Fixed priority arbiter.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ROUND_ROBIN</name>
                  <description>Modified round robin arbiter.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DICEN</name>
              <description>Descriptor Integrity Check</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EN</name>
          <description>DMAC Enable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENABLE</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SREQ</name>
          <description>DMAC Software Single Request Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SSREQ0</name>
              <description>Source Request</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ0</name>
              <description>Destination Request</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SSREQ1</name>
              <description>Source Request</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ1</name>
              <description>Destination Request</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SSREQ2</name>
              <description>Source Request</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ2</name>
              <description>Destination Request</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SSREQ3</name>
              <description>Source Request</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ3</name>
              <description>Destination Request</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SSREQ4</name>
              <description>Source Request</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ4</name>
              <description>Destination Request</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SSREQ5</name>
              <description>Source Request</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ5</name>
              <description>Destination Request</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SSREQ6</name>
              <description>Source Request</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ6</name>
              <description>Destination Request</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SSREQ7</name>
              <description>Source Request</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DSREQ7</name>
              <description>Destination Request</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CREQ</name>
          <description>DMAC Software Chunk Transfer Request Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SCREQ0</name>
              <description>Source Chunk Request</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ0</name>
              <description>Destination Chunk Request</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCREQ1</name>
              <description>Source Chunk Request</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ1</name>
              <description>Destination Chunk Request</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCREQ2</name>
              <description>Source Chunk Request</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ2</name>
              <description>Destination Chunk Request</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCREQ3</name>
              <description>Source Chunk Request</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ3</name>
              <description>Destination Chunk Request</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCREQ4</name>
              <description>Source Chunk Request</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ4</name>
              <description>Destination Chunk Request</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCREQ5</name>
              <description>Source Chunk Request</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ5</name>
              <description>Destination Chunk Request</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCREQ6</name>
              <description>Source Chunk Request</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ6</name>
              <description>Destination Chunk Request</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCREQ7</name>
              <description>Source Chunk Request</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DCREQ7</name>
              <description>Destination Chunk Request</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LAST</name>
          <description>DMAC Software Last Transfer Flag Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SLAST0</name>
              <description>Source Last</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST0</name>
              <description>Destination Last</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SLAST1</name>
              <description>Source Last</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST1</name>
              <description>Destination Last</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SLAST2</name>
              <description>Source Last</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST2</name>
              <description>Destination Last</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SLAST3</name>
              <description>Source Last</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST3</name>
              <description>Destination Last</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SLAST4</name>
              <description>Source Last</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST4</name>
              <description>Destination Last</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SLAST5</name>
              <description>Source Last</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST5</name>
              <description>Destination Last</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SLAST6</name>
              <description>Source Last</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST6</name>
              <description>Destination Last</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SLAST7</name>
              <description>Source Last</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DLAST7</name>
              <description>Destination Last</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EBCIER</name>
          <description>DMAC Error, Chained Buffer Transfer Completed Interrupt and Buffer Transfer Completed Interrupt Enable register.</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>BTC0</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC1</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC2</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC3</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC4</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC5</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC6</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC7</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC0</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC1</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC2</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC3</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC4</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC5</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC6</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC7</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR0</name>
              <description>Access Error [7:0]</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR1</name>
              <description>Access Error [7:0]</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR2</name>
              <description>Access Error [7:0]</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR3</name>
              <description>Access Error [7:0]</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR4</name>
              <description>Access Error [7:0]</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR5</name>
              <description>Access Error [7:0]</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR6</name>
              <description>Access Error [7:0]</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR7</name>
              <description>Access Error [7:0]</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR0</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR1</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR2</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR3</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR4</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR5</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR6</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR7</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EBCIDR</name>
          <description>DMAC Error, Chained Buffer Transfer Completed Interrupt and Buffer Transfer Completed Interrupt Disable register.</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>BTC0</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC1</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC2</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC3</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC4</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC5</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC6</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>BTC7</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC0</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC1</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC2</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC3</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC4</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC5</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC6</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CBTC7</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR0</name>
              <description>Access Error [7:0]</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR1</name>
              <description>Access Error [7:0]</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR2</name>
              <description>Access Error [7:0]</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR3</name>
              <description>Access Error [7:0]</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR4</name>
              <description>Access Error [7:0]</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR5</name>
              <description>Access Error [7:0]</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR6</name>
              <description>Access Error [7:0]</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ERR7</name>
              <description>Access Error [7:0]</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR0</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR1</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR2</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR3</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR4</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR5</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR6</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DICERR7</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EBCIMR</name>
          <description>DMAC Error, Chained Buffer Transfer Completed Interrupt and Buffer transfer completed Mask Register.</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTC0</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC1</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC2</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC3</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC4</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC5</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC6</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC7</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC0</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC1</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC2</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC3</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC4</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC5</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC6</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC7</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR0</name>
              <description>Access Error [7:0]</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR1</name>
              <description>Access Error [7:0]</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR2</name>
              <description>Access Error [7:0]</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR3</name>
              <description>Access Error [7:0]</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR4</name>
              <description>Access Error [7:0]</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR5</name>
              <description>Access Error [7:0]</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR6</name>
              <description>Access Error [7:0]</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR7</name>
              <description>Access Error [7:0]</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR0</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR1</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR2</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR3</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR4</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR5</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR6</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR7</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EBCISR</name>
          <description>DMAC Error, Chained Buffer Transfer Completed Interrupt and Buffer transfer completed Status Register.</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTC0</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC1</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC2</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC3</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC4</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC5</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC6</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>BTC7</name>
              <description>Buffer Transfer Completed [7:0]</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC0</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC1</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC2</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC3</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC4</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC5</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC6</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CBTC7</name>
              <description>Chained Buffer Transfer Completed [7:0]</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR0</name>
              <description>Access Error [7:0]</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR1</name>
              <description>Access Error [7:0]</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR2</name>
              <description>Access Error [7:0]</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR3</name>
              <description>Access Error [7:0]</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR4</name>
              <description>Access Error [7:0]</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR5</name>
              <description>Access Error [7:0]</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR6</name>
              <description>Access Error [7:0]</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ERR7</name>
              <description>Access Error [7:0]</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR0</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR1</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR2</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR3</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR4</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR5</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR6</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DICERR7</name>
              <description>Descriptor Integrity Check Error [7:0]</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHER</name>
          <description>DMAC Channel Handler Enable Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>ENA0</name>
              <description>Enable [7:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENA1</name>
              <description>Enable [7:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENA2</name>
              <description>Enable [7:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENA3</name>
              <description>Enable [7:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENA4</name>
              <description>Enable [7:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENA5</name>
              <description>Enable [7:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENA6</name>
              <description>Enable [7:0]</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ENA7</name>
              <description>Enable [7:0]</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP0</name>
              <description>Suspend [7:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP1</name>
              <description>Suspend [7:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP2</name>
              <description>Suspend [7:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP3</name>
              <description>Suspend [7:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP4</name>
              <description>Suspend [7:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP5</name>
              <description>Suspend [7:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP6</name>
              <description>Suspend [7:0]</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SUSP7</name>
              <description>Suspend [7:0]</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP0</name>
              <description>Keep on [7:0]</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP1</name>
              <description>Keep on [7:0]</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP2</name>
              <description>Keep on [7:0]</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP3</name>
              <description>Keep on [7:0]</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP4</name>
              <description>Keep on [7:0]</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP5</name>
              <description>Keep on [7:0]</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP6</name>
              <description>Keep on [7:0]</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEEP7</name>
              <description>Keep on [7:0]</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHDR</name>
          <description>DMAC Channel Handler Disable Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DIS0</name>
              <description>Disable [7:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIS1</name>
              <description>Disable [7:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIS2</name>
              <description>Disable [7:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIS3</name>
              <description>Disable [7:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIS4</name>
              <description>Disable [7:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIS5</name>
              <description>Disable [7:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIS6</name>
              <description>Disable [7:0]</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DIS7</name>
              <description>Disable [7:0]</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES0</name>
              <description>Resume [7:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES1</name>
              <description>Resume [7:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES2</name>
              <description>Resume [7:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES3</name>
              <description>Resume [7:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES4</name>
              <description>Resume [7:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES5</name>
              <description>Resume [7:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES6</name>
              <description>Resume [7:0]</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RES7</name>
              <description>Resume [7:0]</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CHSR</name>
          <description>DMAC Channel Handler Status Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00FF0000</resetValue>
          <fields>
            <field>
              <name>ENA0</name>
              <description>Enable [7:0]</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENA1</name>
              <description>Enable [7:0]</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENA2</name>
              <description>Enable [7:0]</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENA3</name>
              <description>Enable [7:0]</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENA4</name>
              <description>Enable [7:0]</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENA5</name>
              <description>Enable [7:0]</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENA6</name>
              <description>Enable [7:0]</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ENA7</name>
              <description>Enable [7:0]</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP0</name>
              <description>Suspend [7:0]</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP1</name>
              <description>Suspend [7:0]</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP2</name>
              <description>Suspend [7:0]</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP3</name>
              <description>Suspend [7:0]</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP4</name>
              <description>Suspend [7:0]</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP5</name>
              <description>Suspend [7:0]</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP6</name>
              <description>Suspend [7:0]</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SUSP7</name>
              <description>Suspend [7:0]</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT0</name>
              <description>Empty [7:0]</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT1</name>
              <description>Empty [7:0]</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT2</name>
              <description>Empty [7:0]</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT3</name>
              <description>Empty [7:0]</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT4</name>
              <description>Empty [7:0]</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT5</name>
              <description>Empty [7:0]</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT6</name>
              <description>Empty [7:0]</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EMPT7</name>
              <description>Empty [7:0]</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL0</name>
              <description>Stalled [7:0]</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL1</name>
              <description>Stalled [7:0]</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL2</name>
              <description>Stalled [7:0]</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL3</name>
              <description>Stalled [7:0]</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL4</name>
              <description>Stalled [7:0]</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL5</name>
              <description>Stalled [7:0]</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL6</name>
              <description>Stalled [7:0]</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>STAL7</name>
              <description>Stalled [7:0]</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR0</name>
          <description>DMAC Channel Source Address Register (ch_num = 0)</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR0</name>
          <description>DMAC Channel Destination Address Register (ch_num = 0)</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR0</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 0)</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR_IF</name>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA0</name>
          <description>DMAC Channel Control A Register (ch_num = 0)</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB0</name>
          <description>DMAC Channel Control B Register (ch_num = 0)</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SIF</name>
              <description>Source Interface Selection Field</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The source transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The source transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DIF</name>
              <description>Destination Interface Selection Field</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The destination transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The destination transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PIP</name>
              <description>Source Picture-in-Picture Mode</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The source data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the source PIP counter reaches the programmable boundary, the address is automatically incremented by a user defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PIP</name>
              <description>Destination Picture-in-Picture Mode</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The Destination data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the Destination PIP counter reaches the programmable boundary the address is automatically incremented by a user-defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>AUTO</name>
              <description>Automatic Multiple Buffer Transfer</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Automatic multiple buffer transfer is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Automatic multiple buffer transfer is enabled. This bit enables replay mode or contiguous mode when several buffers are transferred.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG0</name>
          <description>DMAC Channel Configuration Register (ch_num = 0)</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_REP</name>
              <description>Source Reloaded from Previous</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, source address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the source address and the control register are reloaded from previous transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PER_MSB</name>
              <description>SRC_PER Most Significant Bits</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_REP</name>
              <description>Destination Reloaded from Previous</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, destination address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the destination and the control register are reloaded from the pre-vious transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PER_MSB</name>
              <description>DST_PER Most Significant Bits</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SPIP0</name>
          <description>DMAC Channel Source Picture-in-Picture Configuration Register (ch_num = 0)</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SPIP_HOLE</name>
              <description>Source Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPIP_BOUNDARY</name>
              <description>Source Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DPIP0</name>
          <description>DMAC Channel Destination Picture-in-Picture Configuration Register (ch_num = 0)</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DPIP_HOLE</name>
              <description>Destination Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DPIP_BOUNDARY</name>
              <description>Destination Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR1</name>
          <description>DMAC Channel Source Address Register (ch_num = 1)</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR1</name>
          <description>DMAC Channel Destination Address Register (ch_num = 1)</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR1</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 1)</description>
          <addressOffset>0x0000006C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR_IF</name>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA1</name>
          <description>DMAC Channel Control A Register (ch_num = 1)</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB1</name>
          <description>DMAC Channel Control B Register (ch_num = 1)</description>
          <addressOffset>0x00000074</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SIF</name>
              <description>Source Interface Selection Field</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The source transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The source transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DIF</name>
              <description>Destination Interface Selection Field</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The destination transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The destination transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PIP</name>
              <description>Source Picture-in-Picture Mode</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The source data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the source PIP counter reaches the programmable boundary, the address is automatically incremented by a user defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PIP</name>
              <description>Destination Picture-in-Picture Mode</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The Destination data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the Destination PIP counter reaches the programmable boundary the address is automatically incremented by a user-defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>AUTO</name>
              <description>Automatic Multiple Buffer Transfer</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Automatic multiple buffer transfer is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Automatic multiple buffer transfer is enabled. This bit enables replay mode or contiguous mode when several buffers are transferred.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG1</name>
          <description>DMAC Channel Configuration Register (ch_num = 1)</description>
          <addressOffset>0x00000078</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_REP</name>
              <description>Source Reloaded from Previous</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, source address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the source address and the control register are reloaded from previous transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PER_MSB</name>
              <description>SRC_PER Most Significant Bits</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_REP</name>
              <description>Destination Reloaded from Previous</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, destination address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the destination and the control register are reloaded from the pre-vious transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PER_MSB</name>
              <description>DST_PER Most Significant Bits</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SPIP1</name>
          <description>DMAC Channel Source Picture-in-Picture Configuration Register (ch_num = 1)</description>
          <addressOffset>0x0000007C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SPIP_HOLE</name>
              <description>Source Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPIP_BOUNDARY</name>
              <description>Source Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DPIP1</name>
          <description>DMAC Channel Destination Picture-in-Picture Configuration Register (ch_num = 1)</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DPIP_HOLE</name>
              <description>Destination Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DPIP_BOUNDARY</name>
              <description>Destination Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR2</name>
          <description>DMAC Channel Source Address Register (ch_num = 2)</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR2</name>
          <description>DMAC Channel Destination Address Register (ch_num = 2)</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR2</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 2)</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR_IF</name>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA2</name>
          <description>DMAC Channel Control A Register (ch_num = 2)</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB2</name>
          <description>DMAC Channel Control B Register (ch_num = 2)</description>
          <addressOffset>0x0000009C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SIF</name>
              <description>Source Interface Selection Field</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The source transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The source transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DIF</name>
              <description>Destination Interface Selection Field</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The destination transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The destination transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PIP</name>
              <description>Source Picture-in-Picture Mode</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The source data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the source PIP counter reaches the programmable boundary, the address is automatically incremented by a user defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PIP</name>
              <description>Destination Picture-in-Picture Mode</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The Destination data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the Destination PIP counter reaches the programmable boundary the address is automatically incremented by a user-defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>AUTO</name>
              <description>Automatic Multiple Buffer Transfer</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Automatic multiple buffer transfer is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Automatic multiple buffer transfer is enabled. This bit enables replay mode or contiguous mode when several buffers are transferred.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG2</name>
          <description>DMAC Channel Configuration Register (ch_num = 2)</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_REP</name>
              <description>Source Reloaded from Previous</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, source address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the source address and the control register are reloaded from previous transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PER_MSB</name>
              <description>SRC_PER Most Significant Bits</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_REP</name>
              <description>Destination Reloaded from Previous</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, destination address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the destination and the control register are reloaded from the pre-vious transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PER_MSB</name>
              <description>DST_PER Most Significant Bits</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SPIP2</name>
          <description>DMAC Channel Source Picture-in-Picture Configuration Register (ch_num = 2)</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SPIP_HOLE</name>
              <description>Source Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPIP_BOUNDARY</name>
              <description>Source Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DPIP2</name>
          <description>DMAC Channel Destination Picture-in-Picture Configuration Register (ch_num = 2)</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DPIP_HOLE</name>
              <description>Destination Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DPIP_BOUNDARY</name>
              <description>Destination Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR3</name>
          <description>DMAC Channel Source Address Register (ch_num = 3)</description>
          <addressOffset>0x000000B4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR3</name>
          <description>DMAC Channel Destination Address Register (ch_num = 3)</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR3</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 3)</description>
          <addressOffset>0x000000BC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR_IF</name>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA3</name>
          <description>DMAC Channel Control A Register (ch_num = 3)</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB3</name>
          <description>DMAC Channel Control B Register (ch_num = 3)</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SIF</name>
              <description>Source Interface Selection Field</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The source transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The source transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DIF</name>
              <description>Destination Interface Selection Field</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The destination transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The destination transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PIP</name>
              <description>Source Picture-in-Picture Mode</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The source data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the source PIP counter reaches the programmable boundary, the address is automatically incremented by a user defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PIP</name>
              <description>Destination Picture-in-Picture Mode</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The Destination data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the Destination PIP counter reaches the programmable boundary the address is automatically incremented by a user-defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>AUTO</name>
              <description>Automatic Multiple Buffer Transfer</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Automatic multiple buffer transfer is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Automatic multiple buffer transfer is enabled. This bit enables replay mode or contiguous mode when several buffers are transferred.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG3</name>
          <description>DMAC Channel Configuration Register (ch_num = 3)</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_REP</name>
              <description>Source Reloaded from Previous</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, source address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the source address and the control register are reloaded from previous transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PER_MSB</name>
              <description>SRC_PER Most Significant Bits</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_REP</name>
              <description>Destination Reloaded from Previous</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, destination address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the destination and the control register are reloaded from the pre-vious transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PER_MSB</name>
              <description>DST_PER Most Significant Bits</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SPIP3</name>
          <description>DMAC Channel Source Picture-in-Picture Configuration Register (ch_num = 3)</description>
          <addressOffset>0x000000CC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SPIP_HOLE</name>
              <description>Source Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPIP_BOUNDARY</name>
              <description>Source Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DPIP3</name>
          <description>DMAC Channel Destination Picture-in-Picture Configuration Register (ch_num = 3)</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DPIP_HOLE</name>
              <description>Destination Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DPIP_BOUNDARY</name>
              <description>Destination Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR4</name>
          <description>DMAC Channel Source Address Register (ch_num = 4)</description>
          <addressOffset>0x000000DC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR4</name>
          <description>DMAC Channel Destination Address Register (ch_num = 4)</description>
          <addressOffset>0x000000E0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR4</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 4)</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR_IF</name>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA4</name>
          <description>DMAC Channel Control A Register (ch_num = 4)</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB4</name>
          <description>DMAC Channel Control B Register (ch_num = 4)</description>
          <addressOffset>0x000000EC</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SIF</name>
              <description>Source Interface Selection Field</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The source transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The source transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DIF</name>
              <description>Destination Interface Selection Field</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The destination transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The destination transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PIP</name>
              <description>Source Picture-in-Picture Mode</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The source data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the source PIP counter reaches the programmable boundary, the address is automatically incremented by a user defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PIP</name>
              <description>Destination Picture-in-Picture Mode</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The Destination data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the Destination PIP counter reaches the programmable boundary the address is automatically incremented by a user-defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>AUTO</name>
              <description>Automatic Multiple Buffer Transfer</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Automatic multiple buffer transfer is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Automatic multiple buffer transfer is enabled. This bit enables replay mode or contiguous mode when several buffers are transferred.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG4</name>
          <description>DMAC Channel Configuration Register (ch_num = 4)</description>
          <addressOffset>0x000000F0</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_REP</name>
              <description>Source Reloaded from Previous</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, source address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the source address and the control register are reloaded from previous transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PER_MSB</name>
              <description>SRC_PER Most Significant Bits</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_REP</name>
              <description>Destination Reloaded from Previous</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, destination address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the destination and the control register are reloaded from the pre-vious transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PER_MSB</name>
              <description>DST_PER Most Significant Bits</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SPIP4</name>
          <description>DMAC Channel Source Picture-in-Picture Configuration Register (ch_num = 4)</description>
          <addressOffset>0x000000F4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SPIP_HOLE</name>
              <description>Source Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPIP_BOUNDARY</name>
              <description>Source Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DPIP4</name>
          <description>DMAC Channel Destination Picture-in-Picture Configuration Register (ch_num = 4)</description>
          <addressOffset>0x000000F8</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DPIP_HOLE</name>
              <description>Destination Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DPIP_BOUNDARY</name>
              <description>Destination Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR5</name>
          <description>DMAC Channel Source Address Register (ch_num = 5)</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR5</name>
          <description>DMAC Channel Destination Address Register (ch_num = 5)</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR5</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 5)</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR_IF</name>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA5</name>
          <description>DMAC Channel Control A Register (ch_num = 5)</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB5</name>
          <description>DMAC Channel Control B Register (ch_num = 5)</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SIF</name>
              <description>Source Interface Selection Field</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The source transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The source transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DIF</name>
              <description>Destination Interface Selection Field</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The destination transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The destination transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PIP</name>
              <description>Source Picture-in-Picture Mode</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The source data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the source PIP counter reaches the programmable boundary, the address is automatically incremented by a user defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PIP</name>
              <description>Destination Picture-in-Picture Mode</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The Destination data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the Destination PIP counter reaches the programmable boundary the address is automatically incremented by a user-defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>AUTO</name>
              <description>Automatic Multiple Buffer Transfer</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Automatic multiple buffer transfer is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Automatic multiple buffer transfer is enabled. This bit enables replay mode or contiguous mode when several buffers are transferred.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG5</name>
          <description>DMAC Channel Configuration Register (ch_num = 5)</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_REP</name>
              <description>Source Reloaded from Previous</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, source address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the source address and the control register are reloaded from previous transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PER_MSB</name>
              <description>SRC_PER Most Significant Bits</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_REP</name>
              <description>Destination Reloaded from Previous</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, destination address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the destination and the control register are reloaded from the pre-vious transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PER_MSB</name>
              <description>DST_PER Most Significant Bits</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SPIP5</name>
          <description>DMAC Channel Source Picture-in-Picture Configuration Register (ch_num = 5)</description>
          <addressOffset>0x0000011C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SPIP_HOLE</name>
              <description>Source Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPIP_BOUNDARY</name>
              <description>Source Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DPIP5</name>
          <description>DMAC Channel Destination Picture-in-Picture Configuration Register (ch_num = 5)</description>
          <addressOffset>0x00000120</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DPIP_HOLE</name>
              <description>Destination Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DPIP_BOUNDARY</name>
              <description>Destination Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR6</name>
          <description>DMAC Channel Source Address Register (ch_num = 6)</description>
          <addressOffset>0x0000012C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR6</name>
          <description>DMAC Channel Destination Address Register (ch_num = 6)</description>
          <addressOffset>0x00000130</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR6</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 6)</description>
          <addressOffset>0x00000134</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR_IF</name>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA6</name>
          <description>DMAC Channel Control A Register (ch_num = 6)</description>
          <addressOffset>0x00000138</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB6</name>
          <description>DMAC Channel Control B Register (ch_num = 6)</description>
          <addressOffset>0x0000013C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SIF</name>
              <description>Source Interface Selection Field</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The source transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The source transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DIF</name>
              <description>Destination Interface Selection Field</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The destination transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The destination transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PIP</name>
              <description>Source Picture-in-Picture Mode</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The source data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the source PIP counter reaches the programmable boundary, the address is automatically incremented by a user defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PIP</name>
              <description>Destination Picture-in-Picture Mode</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The Destination data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the Destination PIP counter reaches the programmable boundary the address is automatically incremented by a user-defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>AUTO</name>
              <description>Automatic Multiple Buffer Transfer</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Automatic multiple buffer transfer is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Automatic multiple buffer transfer is enabled. This bit enables replay mode or contiguous mode when several buffers are transferred.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG6</name>
          <description>DMAC Channel Configuration Register (ch_num = 6)</description>
          <addressOffset>0x00000140</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_REP</name>
              <description>Source Reloaded from Previous</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, source address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the source address and the control register are reloaded from previous transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PER_MSB</name>
              <description>SRC_PER Most Significant Bits</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_REP</name>
              <description>Destination Reloaded from Previous</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, destination address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the destination and the control register are reloaded from the pre-vious transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PER_MSB</name>
              <description>DST_PER Most Significant Bits</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SPIP6</name>
          <description>DMAC Channel Source Picture-in-Picture Configuration Register (ch_num = 6)</description>
          <addressOffset>0x00000144</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SPIP_HOLE</name>
              <description>Source Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPIP_BOUNDARY</name>
              <description>Source Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DPIP6</name>
          <description>DMAC Channel Destination Picture-in-Picture Configuration Register (ch_num = 6)</description>
          <addressOffset>0x00000148</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DPIP_HOLE</name>
              <description>Destination Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DPIP_BOUNDARY</name>
              <description>Destination Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SADDR7</name>
          <description>DMAC Channel Source Address Register (ch_num = 7)</description>
          <addressOffset>0x00000154</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SADDR</name>
              <description>Channel x Source Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DADDR7</name>
          <description>DMAC Channel Destination Address Register (ch_num = 7)</description>
          <addressOffset>0x00000158</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DADDR</name>
              <description>Channel x Destination Address</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DSCR7</name>
          <description>DMAC Channel Descriptor Address Register (ch_num = 7)</description>
          <addressOffset>0x0000015C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DSCR_IF</name>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DSCR</name>
              <description>Buffer Transfer Descriptor Address</description>
              <bitOffset>2</bitOffset>
              <bitWidth>30</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLA7</name>
          <description>DMAC Channel Control A Register (ch_num = 7)</description>
          <addressOffset>0x00000160</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>BTSIZE</name>
              <description>Buffer Transfer Size</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCSIZE</name>
              <description>Source Chunk Transfer Size.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DCSIZE</name>
              <description>Destination Chunk Transfer Size</description>
              <bitOffset>20</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHK_1</name>
                  <description>1 data transferred</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_4</name>
                  <description>4 data transferred</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_8</name>
                  <description>8 data transferred</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_16</name>
                  <description>16 data transferred</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_32</name>
                  <description>32 data transferred</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_64</name>
                  <description>64 data transferred</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_128</name>
                  <description>128 data transferred</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CHK_256</name>
                  <description>256 data transferred</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_WIDTH</name>
              <description>Transfer Width for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_WIDTH</name>
              <description>Transfer Width for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BYTE</name>
                  <description>the transfer size is set to 8-bit width</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_WORD</name>
                  <description>the transfer size is set to 16-bit width</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WORD</name>
                  <description>the transfer size is set to 32-bit width</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CTRLB7</name>
          <description>DMAC Channel Control B Register (ch_num = 7)</description>
          <addressOffset>0x00000164</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SIF</name>
              <description>Source Interface Selection Field</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The source transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The source transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DIF</name>
              <description>Destination Interface Selection Field</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AHB_IF0</name>
                  <description>The destination transfer is done via AHB-Lite Interface 0</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AHB_IF1</name>
                  <description>The destination transfer is done via AHB-Lite Interface 1</description>
                  <value>0x1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PIP</name>
              <description>Source Picture-in-Picture Mode</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The source data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the source PIP counter reaches the programmable boundary, the address is automatically incremented by a user defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PIP</name>
              <description>Destination Picture-in-Picture Mode</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Picture-in-Picture mode is disabled. The Destination data area is contiguous.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Picture-in-Picture mode is enabled. When the Destination PIP counter reaches the programmable boundary the address is automatically incremented by a user-defined amount.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_DSCR</name>
              <description>Source Address Descriptor</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Source address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the source.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_DSCR</name>
              <description>Destination Address Descriptor</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FETCH_FROM_MEM</name>
                  <description>Destination address is updated when the descriptor is fetched from the memory.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FETCH_DISABLE</name>
                  <description>Buffer Descriptor Fetch operation is disabled for the destination.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FC</name>
              <description>Flow Control</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MEM2MEM_DMA_FC</name>
                  <description>Memory-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MEM2PER_DMA_FC</name>
                  <description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2MEM_DMA_FC</name>
                  <description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PER2PER_DMA_FC</name>
                  <description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Source</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The source address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The source address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The source address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_INCR</name>
              <description>Incrementing, Decrementing or Fixed Address for the Destination</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INCREMENTING</name>
                  <description>The destination address is incremented</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DECREMENTING</name>
                  <description>The destination address is decremented</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FIXED</name>
                  <description>The destination address remains unchanged</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IEN</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>AUTO</name>
              <description>Automatic Multiple Buffer Transfer</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Automatic multiple buffer transfer is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Automatic multiple buffer transfer is enabled. This bit enables replay mode or contiguous mode when several buffers are transferred.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CFG7</name>
          <description>DMAC Channel Configuration Register (ch_num = 7)</description>
          <addressOffset>0x00000168</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000000</resetValue>
          <fields>
            <field>
              <name>SRC_PER</name>
              <description>Source with Peripheral identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_PER</name>
              <description>Destination with Peripheral identifier</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRC_REP</name>
              <description>Source Reloaded from Previous</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, source address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the source address and the control register are reloaded from previous transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_H2SEL</name>
              <description>Software or Hardware Selection for the Source</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRC_PER_MSB</name>
              <description>SRC_PER Most Significant Bits</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DST_REP</name>
              <description>Destination Reloaded from Previous</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CONTIGUOUS_ADDR</name>
                  <description>When automatic mode is activated, destination address is contiguous between two buffers.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RELOAD_ADDR</name>
                  <description>When automatic mode is activated, the destination and the control register are reloaded from the pre-vious transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_H2SEL</name>
              <description>Software or Hardware Selection for the Destination</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SW</name>
                  <description>Software handshaking interface is used to trigger a transfer request.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HW</name>
                  <description>Hardware handshaking interface is used to trigger a transfer request.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DST_PER_MSB</name>
              <description>DST_PER Most Significant Bits</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SOD</name>
              <description>Stop On Done</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>STOP ON DONE disabled, the descriptor fetch operation ignores DONE Field of CTRLA register.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>STOP ON DONE activated, the DMAC module is automatically disabled if DONE FIELD is set to 1.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF</name>
              <description>Interface Lock</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>Interface Lock capability is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ENABLE</name>
                  <description>Interface Lock capability is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_B</name>
              <description>Bus Lock</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLE</name>
                  <description>AHB Bus Locking capability is disabled.</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCK_IF_L</name>
              <description>Master Interface Arbiter Lock</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CHUNK</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a chunk transfer.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>BUFFER</name>
                  <description>The Master Interface Arbiter is locked by the channel x for a buffer transfer.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AHB_PROT</name>
              <description>AHB Protection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>FIFOCFG</name>
              <description>FIFO Configuration</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ALAP_CFG</name>
                  <description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HALF_CFG</name>
                  <description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ASAP_CFG</name>
                  <description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SPIP7</name>
          <description>DMAC Channel Source Picture-in-Picture Configuration Register (ch_num = 7)</description>
          <addressOffset>0x0000016C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SPIP_HOLE</name>
              <description>Source Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SPIP_BOUNDARY</name>
              <description>Source Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DPIP7</name>
          <description>DMAC Channel Destination Picture-in-Picture Configuration Register (ch_num = 7)</description>
          <addressOffset>0x00000170</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DPIP_HOLE</name>
              <description>Destination Picture-in-Picture Hole</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DPIP_BOUNDARY</name>
              <description>Destination Picture-in-Picture Boundary</description>
              <bitOffset>16</bitOffset>
              <bitWidth>10</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>DMAC Write Protect Mode Register</description>
          <addressOffset>0x000001E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>DMAC Write Protect Status Register</description>
          <addressOffset>0x000001E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>AIC</name>
      <version>6075H</version>
      <description>Advanced Interrupt Controller</description>
      <prependToName>AIC_</prependToName>
      <baseAddress>0xFFFFF000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>FIQ</name>
        <value>0</value>
      </interrupt>
      <interrupt>
        <name>IRQ</name>
        <value>31</value>
      </interrupt>
      <registers>
        <register>
          <dim>32</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-31</dimIndex>
          <name>SMR[%s]</name>
          <description>Source Mode Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>PRIOR</name>
              <description>Priority Level</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SRCTYPE</name>
              <description>Interrupt Source Type</description>
              <bitOffset>5</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>INT_LEVEL_SENSITIVE</name>
                  <description>High level Sensitive for internal sourceLow level Sensitive for external source</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>INT_EDGE_TRIGGERED</name>
                  <description>Positive edge triggered for internal sourceNegative edge triggered for external source</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EXT_HIGH_LEVEL</name>
                  <description>High level Sensitive for internal sourceHigh level Sensitive for external source</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EXT_POSITIVE_EDGE</name>
                  <description>Positive edge triggered for internal sourcePositive edge triggered for external source</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <dim>32</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-31</dimIndex>
          <name>SVR[%s]</name>
          <description>Source Vector Register</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>VECTOR</name>
              <description>Source Vector</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IVR</name>
          <description>Interrupt Vector Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRQV</name>
              <description>Interrupt Vector Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FVR</name>
          <description>FIQ Interrupt Vector Register</description>
          <addressOffset>0x00000104</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FIQV</name>
              <description>FIQ Vector Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x00000108</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>IRQID</name>
              <description>Current Interrupt Identifier</description>
              <bitOffset>0</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IPR</name>
          <description>Interrupt Pending Register</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FIQ</name>
              <description>Interrupt Pending</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SYS</name>
              <description>Interrupt Pending</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID2</name>
              <description>Interrupt Pending</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Interrupt Pending</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Interrupt Pending</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Interrupt Pending</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Interrupt Pending</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Interrupt Pending</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Interrupt Pending</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Interrupt Pending</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Interrupt Pending</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Interrupt Pending</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Interrupt Pending</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Interrupt Pending</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Interrupt Pending</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Interrupt Pending</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Interrupt Pending</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Interrupt Pending</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Interrupt Pending</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Interrupt Pending</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Interrupt Pending</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Interrupt Pending</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Interrupt Pending</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Interrupt Pending</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Interrupt Pending</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Interrupt Pending</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Interrupt Pending</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Interrupt Pending</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Interrupt Pending</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Interrupt Pending</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Interrupt Pending</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Interrupt Pending</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FIQ</name>
              <description>Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SYS</name>
              <description>Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID2</name>
              <description>Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Interrupt Mask</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Interrupt Mask</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CISR</name>
          <description>Core Interrupt Status Register</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NFIQ</name>
              <description>NFIQ Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NIRQ</name>
              <description>NIRQ Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IECR</name>
          <description>Interrupt Enable Command Register</description>
          <addressOffset>0x00000120</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>FIQ</name>
              <description>Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SYS</name>
              <description>Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID2</name>
              <description>Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Interrupt Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDCR</name>
          <description>Interrupt Disable Command Register</description>
          <addressOffset>0x00000124</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>FIQ</name>
              <description>Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SYS</name>
              <description>Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID2</name>
              <description>Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Interrupt Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ICCR</name>
          <description>Interrupt Clear Command Register</description>
          <addressOffset>0x00000128</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>FIQ</name>
              <description>Interrupt Clear</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SYS</name>
              <description>Interrupt Clear</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID2</name>
              <description>Interrupt Clear</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Interrupt Clear</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Interrupt Clear</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Interrupt Clear</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Interrupt Clear</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Interrupt Clear</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Interrupt Clear</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Interrupt Clear</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Interrupt Clear</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Interrupt Clear</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Interrupt Clear</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Interrupt Clear</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Interrupt Clear</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Interrupt Clear</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Interrupt Clear</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Interrupt Clear</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Interrupt Clear</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Interrupt Clear</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Interrupt Clear</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Interrupt Clear</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Interrupt Clear</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Interrupt Clear</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Interrupt Clear</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Interrupt Clear</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Interrupt Clear</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Interrupt Clear</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Interrupt Clear</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Interrupt Clear</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Interrupt Clear</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Interrupt Clear</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISCR</name>
          <description>Interrupt Set Command Register</description>
          <addressOffset>0x0000012C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>FIQ</name>
              <description>Interrupt Set</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SYS</name>
              <description>Interrupt Set</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID2</name>
              <description>Interrupt Set</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Interrupt Set</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Interrupt Set</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Interrupt Set</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Interrupt Set</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Interrupt Set</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Interrupt Set</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Interrupt Set</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Interrupt Set</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Interrupt Set</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Interrupt Set</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Interrupt Set</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Interrupt Set</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Interrupt Set</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Interrupt Set</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Interrupt Set</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Interrupt Set</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Interrupt Set</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Interrupt Set</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Interrupt Set</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Interrupt Set</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Interrupt Set</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Interrupt Set</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Interrupt Set</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Interrupt Set</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Interrupt Set</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Interrupt Set</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Interrupt Set</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Interrupt Set</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Interrupt Set</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EOICR</name>
          <description>End of Interrupt Command Register</description>
          <addressOffset>0x00000130</addressOffset>
          <size>32</size>
          <access>write-only</access>
        </register>
        <register>
          <name>SPU</name>
          <description>Spurious Interrupt Vector Register</description>
          <addressOffset>0x00000134</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SIVR</name>
              <description>Spurious Interrupt Vector Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DCR</name>
          <description>Debug Control Register</description>
          <addressOffset>0x00000138</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PROT</name>
              <description>Protection Mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>GMSK</name>
              <description>General Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FFER</name>
          <description>Fast Forcing Enable Register</description>
          <addressOffset>0x00000140</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SYS</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID2</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Fast Forcing Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FFDR</name>
          <description>Fast Forcing Disable Register</description>
          <addressOffset>0x00000144</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SYS</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID2</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Fast Forcing Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FFSR</name>
          <description>Fast Forcing Status Register</description>
          <addressOffset>0x00000148</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SYS</name>
              <description>Fast Forcing Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID2</name>
              <description>Fast Forcing Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Fast Forcing Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Fast Forcing Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Fast Forcing Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Fast Forcing Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Fast Forcing Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Fast Forcing Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Fast Forcing Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Fast Forcing Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Fast Forcing Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Fast Forcing Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Fast Forcing Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Fast Forcing Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Fast Forcing Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Fast Forcing Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Fast Forcing Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Fast Forcing Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Fast Forcing Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Fast Forcing Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Fast Forcing Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Fast Forcing Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Fast Forcing Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Fast Forcing Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Fast Forcing Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Fast Forcing Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Fast Forcing Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Fast Forcing Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Fast Forcing Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Fast Forcing Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Fast Forcing Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000001E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000001E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>DBGU</name>
      <version>6059M</version>
      <description>Debug Unit</description>
      <prependToName>DBGU_</prependToName>
      <baseAddress>0xFFFFF200</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>DBGU</name>
        <value>1</value>
      </interrupt>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RSTRX</name>
              <description>Reset Receiver</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTTX</name>
              <description>Reset Transmitter</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXEN</name>
              <description>Receiver Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RXDIS</name>
              <description>Receiver Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEN</name>
              <description>Transmitter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXDIS</name>
              <description>Transmitter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>RSTSTA</name>
              <description>Reset Status Bits</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PAR</name>
              <description>Parity Type</description>
              <bitOffset>9</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>EVEN</name>
                  <description>Even Parity</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ODD</name>
                  <description>Odd Parity</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPACE</name>
                  <description>Space: Parity forced to 0</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MARK</name>
                  <description>Mark: Parity forced to 1</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>No Parity</description>
                  <value>0x4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CHMODE</name>
              <description>Channel Mode</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NORM</name>
                  <description>Normal Mode</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AUTO</name>
                  <description>Automatic Echo</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LOCLOOP</name>
                  <description>Local Loopback</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>REMLOOP</name>
                  <description>Remote Loopback</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Enable RXRDY Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Enable TXRDY Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Enable Overrun Error Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Enable Framing Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Enable Parity Error Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Enable TXEMPTY Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>COMMTX</name>
              <description>Enable COMMTX (from ARM) Interrupt</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>COMMRX</name>
              <description>Enable COMMRX (from ARM) Interrupt</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Disable RXRDY Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Disable TXRDY Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Disable Overrun Error Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Disable Framing Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Disable Parity Error Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Disable TXEMPTY Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>COMMTX</name>
              <description>Disable COMMTX (from ARM) Interrupt</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>COMMRX</name>
              <description>Disable COMMRX (from ARM) Interrupt</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Mask RXRDY Interrupt</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Disable TXRDY Interrupt</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Mask Overrun Error Interrupt</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Mask Framing Error Interrupt</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Mask Parity Error Interrupt</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Mask TXEMPTY Interrupt</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>COMMTX</name>
              <description>Mask COMMTX Interrupt</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>COMMRX</name>
              <description>Mask COMMRX Interrupt</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXRDY</name>
              <description>Receiver Ready</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXRDY</name>
              <description>Transmitter Ready</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OVRE</name>
              <description>Overrun Error</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FRAME</name>
              <description>Framing Error</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PARE</name>
              <description>Parity Error</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TXEMPTY</name>
              <description>Transmitter Empty</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>COMMTX</name>
              <description>Debug Communication Channel Write Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>COMMRX</name>
              <description>Debug Communication Channel Read Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>RHR</name>
          <description>Receive Holding Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RXCHR</name>
              <description>Received Character</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>THR</name>
          <description>Transmit Holding Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXCHR</name>
              <description>Character to be Transmitted</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>BRGR</name>
          <description>Baud Rate Generator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CD</name>
              <description>Clock Divisor</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DISABLED</name>
                  <description>DBGU Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK</name>
                  <description>MCK</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CIDR</name>
          <description>Chip ID Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>VERSION</name>
              <description>Version of the Device</description>
              <bitOffset>0</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>EPROC</name>
              <description>Embedded Processor</description>
              <bitOffset>5</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ARM946ES</name>
                  <description>ARM946ES</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ARM7TDMI</name>
                  <description>ARM7TDMI</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CM3</name>
                  <description>Cortex-M3</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ARM920T</name>
                  <description>ARM920T</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ARM926EJS</name>
                  <description>ARM926EJS</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CA5</name>
                  <description>Cortex-A5</description>
                  <value>0x6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NVPSIZ</name>
              <description>Nonvolatile Program Memory Size</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8K</name>
                  <description>8K bytes</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16K</name>
                  <description>16K bytes</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32K</name>
                  <description>32K bytes</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>64K</name>
                  <description>64K bytes</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>128K</name>
                  <description>128K bytes</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256K</name>
                  <description>256K bytes</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>512K</name>
                  <description>512K bytes</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1024K</name>
                  <description>1024K bytes</description>
                  <value>0xC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2048K</name>
                  <description>2048K bytes</description>
                  <value>0xE</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NVPSIZ2</name>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NONE</name>
                  <description>None</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8K</name>
                  <description>8K bytes</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16K</name>
                  <description>16K bytes</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32K</name>
                  <description>32K bytes</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>64K</name>
                  <description>64K bytes</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>128K</name>
                  <description>128K bytes</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256K</name>
                  <description>256K bytes</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>512K</name>
                  <description>512K bytes</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1024K</name>
                  <description>1024K bytes</description>
                  <value>0xC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2048K</name>
                  <description>2048K bytes</description>
                  <value>0xE</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SRAMSIZ</name>
              <description>Internal SRAM Size</description>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1K</name>
                  <description>1K bytes</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2K</name>
                  <description>2K bytes</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>6K</name>
                  <description>6K bytes</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>112K</name>
                  <description>112K bytes</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4K</name>
                  <description>4K bytes</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>80K</name>
                  <description>80K bytes</description>
                  <value>0x6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>160K</name>
                  <description>160K bytes</description>
                  <value>0x7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8K</name>
                  <description>8K bytes</description>
                  <value>0x8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16K</name>
                  <description>16K bytes</description>
                  <value>0x9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32K</name>
                  <description>32K bytes</description>
                  <value>0xA</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>64K</name>
                  <description>64K bytes</description>
                  <value>0xB</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>128K</name>
                  <description>128K bytes</description>
                  <value>0xC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256K</name>
                  <description>256K bytes</description>
                  <value>0xD</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>96K</name>
                  <description>96K bytes</description>
                  <value>0xE</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>512K</name>
                  <description>512K bytes</description>
                  <value>0xF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ARCH</name>
              <description>Architecture Identifier</description>
              <bitOffset>20</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AT91SAM9xx</name>
                  <description>AT91SAM9xx Series</description>
                  <value>0x19</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM9XExx</name>
                  <description>AT91SAM9XExx Series</description>
                  <value>0x29</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91x34</name>
                  <description>AT91x34 Series</description>
                  <value>0x34</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP7</name>
                  <description>CAP7 Series</description>
                  <value>0x37</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP9</name>
                  <description>CAP9 Series</description>
                  <value>0x39</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CAP11</name>
                  <description>CAP11 Series</description>
                  <value>0x3B</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91x40</name>
                  <description>AT91x40 Series</description>
                  <value>0x40</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91x42</name>
                  <description>AT91x42 Series</description>
                  <value>0x42</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91x55</name>
                  <description>AT91x55 Series</description>
                  <value>0x55</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7Axx</name>
                  <description>AT91SAM7Axx Series</description>
                  <value>0x60</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7AQxx</name>
                  <description>AT91SAM7AQxx Series</description>
                  <value>0x61</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91x63</name>
                  <description>AT91x63 Series</description>
                  <value>0x63</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7Sxx</name>
                  <description>AT91SAM7Sxx Series</description>
                  <value>0x70</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7XCxx</name>
                  <description>AT91SAM7XCxx Series</description>
                  <value>0x71</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7SExx</name>
                  <description>AT91SAM7SExx Series</description>
                  <value>0x72</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7Lxx</name>
                  <description>AT91SAM7Lxx Series</description>
                  <value>0x73</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7Xxx</name>
                  <description>AT91SAM7Xxx Series</description>
                  <value>0x75</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91SAM7SLxx</name>
                  <description>AT91SAM7SLxx Series</description>
                  <value>0x76</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3UxC</name>
                  <description>ATSAM3UxC Series (100-pin version)</description>
                  <value>0x80</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3UxE</name>
                  <description>ATSAM3UxE Series (144-pin version)</description>
                  <value>0x81</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3AxC</name>
                  <description>ATSAM3AxC Series (100-pin version)</description>
                  <value>0x83</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3XxC</name>
                  <description>ATSAM3XxC Series (100-pin version)</description>
                  <value>0x84</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3XxE</name>
                  <description>ATSAM3XxE Series (144-pin version)</description>
                  <value>0x85</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3XxG</name>
                  <description>ATSAM3XxG Series (208/217-pin version)</description>
                  <value>0x86</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3SxA</name>
                  <description>ATSAM3SxA Series (48-pin version)</description>
                  <value>0x88</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3SxB</name>
                  <description>ATSAM3SxB Series (64-pin version)</description>
                  <value>0x89</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3SxC</name>
                  <description>ATSAM3SxC Series (100-pin version)</description>
                  <value>0x8A</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT91x92</name>
                  <description>AT91x92 Series</description>
                  <value>0x92</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3NxA</name>
                  <description>ATSAM3NxA Series (48-pin version)</description>
                  <value>0x93</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3NxB</name>
                  <description>ATSAM3NxB Series (64-pin version)</description>
                  <value>0x94</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3NxC</name>
                  <description>ATSAM3NxC Series (100-pin version)</description>
                  <value>0x95</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3SDxA</name>
                  <description>ATSAM3SDxA Series (48-pin version)</description>
                  <value>0x98</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3SDxB</name>
                  <description>ATSAM3SDxB Series (64-pin version)</description>
                  <value>0x99</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ATSAM3SDxC</name>
                  <description>ATSAM3SDxC Series (100-pin version)</description>
                  <value>0x9A</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AT75Cxx</name>
                  <description>AT75Cxx Series</description>
                  <value>0xF0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NVPTYP</name>
              <description>Nonvolatile Program Memory Type</description>
              <bitOffset>28</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ROM</name>
                  <description>ROM</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ROMLESS</name>
                  <description>ROMless or on-chip Flash</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FLASH</name>
                  <description>Embedded Flash Memory</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ROM_FLASH</name>
                  <description>ROM and Embedded Flash MemoryNVPSIZ is ROM size      NVPSIZ2 is Flash size</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SRAM</name>
                  <description>SRAM emulating ROM</description>
                  <value>0x4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EXT</name>
              <description>Extension Flag</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>EXID</name>
          <description>Chip ID Extension Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>EXID</name>
              <description>Chip ID Extension</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FNR</name>
          <description>Force NTRST Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>FNTRST</name>
              <description>Force NTRST</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PIOA</name>
      <version>11004F</version>
      <description>Parallel Input/Output Controller A</description>
      <groupName>PIO</groupName>
      <prependToName>PIOA_</prependToName>
      <baseAddress>0xFFFFF400</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>PIOA</name>
        <value>2</value>
      </interrupt>
      <registers>
        <register>
          <name>PER</name>
          <description>PIO Enable Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDR</name>
          <description>PIO Disable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PSR</name>
          <description>PIO Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OER</name>
          <description>Output Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODR</name>
          <description>Output Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OSR</name>
          <description>Output Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFER</name>
          <description>Glitch Input Filter Enable Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFDR</name>
          <description>Glitch Input Filter Disable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSR</name>
          <description>Glitch Input Filter Status Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filer Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filer Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filer Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filer Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filer Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filer Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filer Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filer Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filer Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filer Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filer Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filer Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filer Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filer Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filer Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filer Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filer Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filer Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filer Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filer Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filer Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filer Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filer Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filer Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filer Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filer Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filer Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filer Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filer Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filer Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SODR</name>
          <description>Set Output Data Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Set Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Set Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Set Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Set Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Set Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Set Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Set Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Set Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Set Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Set Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Set Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Set Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Set Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Set Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Set Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Set Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Set Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Set Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Set Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Set Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Set Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Set Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Set Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Set Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Set Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Set Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Set Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Set Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Set Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Set Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Set Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Set Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CODR</name>
          <description>Clear Output Data Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Clear Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Clear Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Clear Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Clear Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Clear Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Clear Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Clear Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Clear Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Clear Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Clear Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Clear Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Clear Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Clear Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Clear Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Clear Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Clear Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Clear Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Clear Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Clear Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Clear Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Clear Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Clear Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Clear Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Clear Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Clear Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Clear Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Clear Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Clear Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Clear Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Clear Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Clear Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Clear Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODSR</name>
          <description>Output Data Status Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDSR</name>
          <description>Pin Data Status Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDER</name>
          <description>Multi-driver Enable Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDDR</name>
          <description>Multi-driver Disable Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDSR</name>
          <description>Multi-driver Status Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUDR</name>
          <description>Pull-up Disable Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUER</name>
          <description>Pull-up Enable Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUSR</name>
          <description>Pad Pull-up Status Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-1</dimIndex>
          <name>ABCDSR[%s]</name>
          <description>Peripheral Select Register</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSCDR</name>
          <description>Input Filter Slow Clock Disable Register</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSCER</name>
          <description>Input Filter Slow Clock Enable Register</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSCSR</name>
          <description>Input Filter Slow Clock Status Register</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCDR</name>
          <description>Slow Clock Divider Debouncing Register</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIV</name>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PPDDR</name>
          <description>Pad Pull-down Disable Register</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Down Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Down Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Down Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Down Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Down Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Down Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Down Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Down Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Down Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Down Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Down Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Down Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Down Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Down Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Down Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Down Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Down Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Down Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Down Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Down Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Down Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Down Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Down Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Down Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Down Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Down Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Down Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Down Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Down Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Down Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Down Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Down Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PPDER</name>
          <description>Pad Pull-down Enable Register</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Down Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Down Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Down Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Down Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Down Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Down Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Down Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Down Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Down Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Down Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Down Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Down Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Down Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Down Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Down Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Down Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Down Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Down Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Down Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Down Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Down Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Down Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Down Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Down Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Down Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Down Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Down Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Down Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Down Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Down Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Down Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Down Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PPDSR</name>
          <description>Pad Pull-down Status Register</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Down Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Down Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Down Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Down Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Down Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Down Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Down Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Down Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Down Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Down Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Down Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Down Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Down Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Down Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Down Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Down Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Down Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Down Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Down Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Down Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Down Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Down Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Down Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Down Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Down Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Down Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Down Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Down Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Down Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Down Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Down Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Down Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWER</name>
          <description>Output Write Enable</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWDR</name>
          <description>Output Write Disable</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWSR</name>
          <description>Output Write Status Register</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMER</name>
          <description>Additional Interrupt Modes Enable Register</description>
          <addressOffset>0x000000B0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMDR</name>
          <description>Additional Interrupt Modes Disables Register</description>
          <addressOffset>0x000000B4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMMR</name>
          <description>Additional Interrupt Modes Mask Register</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ESR</name>
          <description>Edge Select Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LSR</name>
          <description>Level Select Register</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELSR</name>
          <description>Edge/Level Status Register</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FELLSR</name>
          <description>Falling Edge/Low Level Select Register</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REHLSR</name>
          <description>Rising Edge/ High Level Select Register</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FRLHSR</name>
          <description>Fall/Rise - Low/High Status Register</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LOCKSR</name>
          <description>Lock Status</description>
          <addressOffset>0x000000E0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Lock Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Lock Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Lock Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Lock Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Lock Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Lock Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Lock Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Lock Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Lock Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Lock Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Lock Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Lock Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Lock Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Lock Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Lock Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Lock Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Lock Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Lock Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Lock Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Lock Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Lock Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Lock Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Lock Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Lock Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Lock Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Lock Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Lock Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Lock Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Lock Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Lock Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Lock Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Lock Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCHMITT</name>
          <description>Schmitt Trigger Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SCHMITT0</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT1</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT2</name>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT3</name>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT4</name>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT5</name>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT6</name>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT7</name>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT8</name>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT9</name>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT10</name>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT11</name>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT12</name>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT13</name>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT14</name>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT15</name>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT16</name>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT17</name>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT18</name>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT19</name>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT20</name>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT21</name>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT22</name>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT23</name>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT24</name>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT25</name>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT26</name>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT27</name>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT28</name>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT29</name>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT30</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT31</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DELAYR</name>
          <description>IO Delay Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>Delay0</name>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay1</name>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay2</name>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay3</name>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay4</name>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay5</name>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay6</name>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay7</name>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DRIVER1</name>
          <description>I/O Drive Register 1</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LINE0</name>
              <description>Drive of PIO line 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE1</name>
              <description>Drive of PIO line 1</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE2</name>
              <description>Drive of PIO line 2</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE3</name>
              <description>Drive of PIO line 3</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE4</name>
              <description>Drive of PIO line 4</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE5</name>
              <description>Drive of PIO line 5</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE6</name>
              <description>Drive of PIO line 6</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE7</name>
              <description>Drive of PIO line 7</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE8</name>
              <description>Drive of PIO line 8</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE9</name>
              <description>Drive of PIO line 9</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE10</name>
              <description>Drive of PIO line 10</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE11</name>
              <description>Drive of PIO line 11</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE12</name>
              <description>Drive of PIO line 12</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE13</name>
              <description>Drive of PIO line 13</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE14</name>
              <description>Drive of PIO line 14</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE15</name>
              <description>Drive of PIO line 15</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DRIVER2</name>
          <description>I/O Drive Register 2</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LINE16</name>
              <description>Drive of PIO line 16</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE17</name>
              <description>Drive of PIO line 17</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE18</name>
              <description>Drive of PIO line 18</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE19</name>
              <description>Drive of PIO line 19</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE20</name>
              <description>Drive of PIO line 20</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE21</name>
              <description>Drive of PIO line 21</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE22</name>
              <description>Drive of PIO line 22</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE23</name>
              <description>Drive of PIO line 23</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE24</name>
              <description>Drive of PIO line 24</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE25</name>
              <description>Drive of PIO line 25</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE26</name>
              <description>Drive of PIO line 26</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE27</name>
              <description>Drive of PIO line 27</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE28</name>
              <description>Drive of PIO line 28</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE29</name>
              <description>Drive of PIO line 29</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE30</name>
              <description>Drive of PIO line 30</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE31</name>
              <description>Drive of PIO line 31</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PIOB</name>
      <version>11004F</version>
      <description>Parallel Input/Output Controller B</description>
      <groupName>PIO</groupName>
      <prependToName>PIOB_</prependToName>
      <baseAddress>0xFFFFF600</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>PER</name>
          <description>PIO Enable Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDR</name>
          <description>PIO Disable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PSR</name>
          <description>PIO Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OER</name>
          <description>Output Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODR</name>
          <description>Output Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OSR</name>
          <description>Output Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFER</name>
          <description>Glitch Input Filter Enable Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFDR</name>
          <description>Glitch Input Filter Disable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSR</name>
          <description>Glitch Input Filter Status Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filer Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filer Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filer Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filer Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filer Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filer Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filer Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filer Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filer Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filer Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filer Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filer Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filer Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filer Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filer Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filer Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filer Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filer Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filer Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filer Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filer Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filer Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filer Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filer Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filer Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filer Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filer Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filer Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filer Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filer Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SODR</name>
          <description>Set Output Data Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Set Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Set Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Set Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Set Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Set Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Set Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Set Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Set Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Set Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Set Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Set Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Set Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Set Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Set Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Set Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Set Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Set Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Set Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Set Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Set Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Set Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Set Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Set Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Set Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Set Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Set Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Set Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Set Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Set Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Set Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Set Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Set Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CODR</name>
          <description>Clear Output Data Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Clear Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Clear Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Clear Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Clear Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Clear Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Clear Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Clear Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Clear Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Clear Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Clear Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Clear Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Clear Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Clear Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Clear Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Clear Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Clear Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Clear Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Clear Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Clear Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Clear Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Clear Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Clear Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Clear Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Clear Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Clear Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Clear Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Clear Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Clear Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Clear Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Clear Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Clear Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Clear Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODSR</name>
          <description>Output Data Status Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDSR</name>
          <description>Pin Data Status Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDER</name>
          <description>Multi-driver Enable Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDDR</name>
          <description>Multi-driver Disable Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDSR</name>
          <description>Multi-driver Status Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUDR</name>
          <description>Pull-up Disable Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUER</name>
          <description>Pull-up Enable Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUSR</name>
          <description>Pad Pull-up Status Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-1</dimIndex>
          <name>ABCDSR[%s]</name>
          <description>Peripheral Select Register</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSCDR</name>
          <description>Input Filter Slow Clock Disable Register</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSCER</name>
          <description>Input Filter Slow Clock Enable Register</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSCSR</name>
          <description>Input Filter Slow Clock Status Register</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCDR</name>
          <description>Slow Clock Divider Debouncing Register</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIV</name>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PPDDR</name>
          <description>Pad Pull-down Disable Register</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Down Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Down Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Down Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Down Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Down Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Down Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Down Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Down Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Down Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Down Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Down Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Down Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Down Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Down Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Down Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Down Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Down Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Down Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Down Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Down Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Down Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Down Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Down Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Down Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Down Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Down Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Down Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Down Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Down Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Down Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Down Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Down Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PPDER</name>
          <description>Pad Pull-down Enable Register</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Down Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Down Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Down Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Down Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Down Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Down Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Down Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Down Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Down Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Down Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Down Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Down Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Down Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Down Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Down Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Down Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Down Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Down Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Down Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Down Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Down Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Down Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Down Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Down Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Down Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Down Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Down Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Down Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Down Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Down Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Down Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Down Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PPDSR</name>
          <description>Pad Pull-down Status Register</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Down Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Down Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Down Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Down Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Down Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Down Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Down Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Down Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Down Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Down Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Down Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Down Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Down Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Down Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Down Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Down Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Down Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Down Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Down Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Down Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Down Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Down Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Down Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Down Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Down Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Down Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Down Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Down Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Down Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Down Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Down Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Down Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWER</name>
          <description>Output Write Enable</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWDR</name>
          <description>Output Write Disable</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWSR</name>
          <description>Output Write Status Register</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMER</name>
          <description>Additional Interrupt Modes Enable Register</description>
          <addressOffset>0x000000B0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMDR</name>
          <description>Additional Interrupt Modes Disables Register</description>
          <addressOffset>0x000000B4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMMR</name>
          <description>Additional Interrupt Modes Mask Register</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ESR</name>
          <description>Edge Select Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LSR</name>
          <description>Level Select Register</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELSR</name>
          <description>Edge/Level Status Register</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FELLSR</name>
          <description>Falling Edge/Low Level Select Register</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REHLSR</name>
          <description>Rising Edge/ High Level Select Register</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FRLHSR</name>
          <description>Fall/Rise - Low/High Status Register</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LOCKSR</name>
          <description>Lock Status</description>
          <addressOffset>0x000000E0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Lock Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Lock Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Lock Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Lock Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Lock Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Lock Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Lock Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Lock Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Lock Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Lock Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Lock Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Lock Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Lock Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Lock Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Lock Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Lock Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Lock Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Lock Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Lock Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Lock Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Lock Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Lock Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Lock Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Lock Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Lock Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Lock Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Lock Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Lock Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Lock Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Lock Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Lock Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Lock Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCHMITT</name>
          <description>Schmitt Trigger Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SCHMITT0</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT1</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT2</name>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT3</name>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT4</name>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT5</name>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT6</name>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT7</name>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT8</name>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT9</name>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT10</name>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT11</name>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT12</name>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT13</name>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT14</name>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT15</name>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT16</name>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT17</name>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT18</name>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT19</name>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT20</name>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT21</name>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT22</name>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT23</name>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT24</name>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT25</name>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT26</name>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT27</name>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT28</name>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT29</name>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT30</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT31</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DELAYR</name>
          <description>IO Delay Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>Delay0</name>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay1</name>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay2</name>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay3</name>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay4</name>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay5</name>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay6</name>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay7</name>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DRIVER1</name>
          <description>I/O Drive Register 1</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LINE0</name>
              <description>Drive of PIO line 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE1</name>
              <description>Drive of PIO line 1</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE2</name>
              <description>Drive of PIO line 2</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE3</name>
              <description>Drive of PIO line 3</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE4</name>
              <description>Drive of PIO line 4</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE5</name>
              <description>Drive of PIO line 5</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE6</name>
              <description>Drive of PIO line 6</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE7</name>
              <description>Drive of PIO line 7</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE8</name>
              <description>Drive of PIO line 8</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE9</name>
              <description>Drive of PIO line 9</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE10</name>
              <description>Drive of PIO line 10</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE11</name>
              <description>Drive of PIO line 11</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE12</name>
              <description>Drive of PIO line 12</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE13</name>
              <description>Drive of PIO line 13</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE14</name>
              <description>Drive of PIO line 14</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE15</name>
              <description>Drive of PIO line 15</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DRIVER2</name>
          <description>I/O Drive Register 2</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LINE16</name>
              <description>Drive of PIO line 16</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE17</name>
              <description>Drive of PIO line 17</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE18</name>
              <description>Drive of PIO line 18</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE19</name>
              <description>Drive of PIO line 19</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE20</name>
              <description>Drive of PIO line 20</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE21</name>
              <description>Drive of PIO line 21</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE22</name>
              <description>Drive of PIO line 22</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE23</name>
              <description>Drive of PIO line 23</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE24</name>
              <description>Drive of PIO line 24</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE25</name>
              <description>Drive of PIO line 25</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE26</name>
              <description>Drive of PIO line 26</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE27</name>
              <description>Drive of PIO line 27</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE28</name>
              <description>Drive of PIO line 28</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE29</name>
              <description>Drive of PIO line 29</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE30</name>
              <description>Drive of PIO line 30</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE31</name>
              <description>Drive of PIO line 31</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PIOC</name>
      <version>11004F</version>
      <description>Parallel Input/Output Controller C</description>
      <groupName>PIO</groupName>
      <prependToName>PIOC_</prependToName>
      <baseAddress>0xFFFFF800</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>PIOC</name>
        <value>3</value>
      </interrupt>
      <registers>
        <register>
          <name>PER</name>
          <description>PIO Enable Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDR</name>
          <description>PIO Disable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PSR</name>
          <description>PIO Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OER</name>
          <description>Output Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODR</name>
          <description>Output Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OSR</name>
          <description>Output Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFER</name>
          <description>Glitch Input Filter Enable Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFDR</name>
          <description>Glitch Input Filter Disable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSR</name>
          <description>Glitch Input Filter Status Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filer Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filer Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filer Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filer Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filer Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filer Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filer Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filer Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filer Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filer Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filer Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filer Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filer Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filer Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filer Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filer Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filer Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filer Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filer Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filer Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filer Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filer Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filer Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filer Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filer Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filer Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filer Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filer Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filer Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filer Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SODR</name>
          <description>Set Output Data Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Set Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Set Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Set Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Set Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Set Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Set Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Set Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Set Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Set Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Set Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Set Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Set Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Set Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Set Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Set Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Set Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Set Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Set Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Set Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Set Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Set Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Set Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Set Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Set Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Set Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Set Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Set Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Set Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Set Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Set Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Set Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Set Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CODR</name>
          <description>Clear Output Data Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Clear Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Clear Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Clear Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Clear Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Clear Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Clear Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Clear Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Clear Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Clear Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Clear Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Clear Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Clear Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Clear Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Clear Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Clear Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Clear Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Clear Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Clear Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Clear Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Clear Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Clear Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Clear Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Clear Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Clear Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Clear Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Clear Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Clear Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Clear Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Clear Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Clear Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Clear Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Clear Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODSR</name>
          <description>Output Data Status Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDSR</name>
          <description>Pin Data Status Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDER</name>
          <description>Multi-driver Enable Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDDR</name>
          <description>Multi-driver Disable Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDSR</name>
          <description>Multi-driver Status Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUDR</name>
          <description>Pull-up Disable Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUER</name>
          <description>Pull-up Enable Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUSR</name>
          <description>Pad Pull-up Status Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-1</dimIndex>
          <name>ABCDSR[%s]</name>
          <description>Peripheral Select Register</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSCDR</name>
          <description>Input Filter Slow Clock Disable Register</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSCER</name>
          <description>Input Filter Slow Clock Enable Register</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSCSR</name>
          <description>Input Filter Slow Clock Status Register</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCDR</name>
          <description>Slow Clock Divider Debouncing Register</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIV</name>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PPDDR</name>
          <description>Pad Pull-down Disable Register</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Down Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Down Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Down Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Down Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Down Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Down Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Down Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Down Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Down Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Down Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Down Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Down Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Down Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Down Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Down Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Down Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Down Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Down Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Down Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Down Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Down Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Down Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Down Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Down Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Down Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Down Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Down Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Down Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Down Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Down Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Down Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Down Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PPDER</name>
          <description>Pad Pull-down Enable Register</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Down Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Down Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Down Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Down Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Down Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Down Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Down Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Down Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Down Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Down Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Down Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Down Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Down Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Down Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Down Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Down Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Down Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Down Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Down Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Down Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Down Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Down Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Down Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Down Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Down Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Down Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Down Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Down Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Down Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Down Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Down Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Down Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PPDSR</name>
          <description>Pad Pull-down Status Register</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Down Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Down Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Down Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Down Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Down Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Down Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Down Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Down Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Down Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Down Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Down Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Down Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Down Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Down Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Down Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Down Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Down Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Down Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Down Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Down Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Down Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Down Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Down Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Down Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Down Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Down Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Down Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Down Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Down Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Down Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Down Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Down Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWER</name>
          <description>Output Write Enable</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWDR</name>
          <description>Output Write Disable</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWSR</name>
          <description>Output Write Status Register</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMER</name>
          <description>Additional Interrupt Modes Enable Register</description>
          <addressOffset>0x000000B0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMDR</name>
          <description>Additional Interrupt Modes Disables Register</description>
          <addressOffset>0x000000B4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMMR</name>
          <description>Additional Interrupt Modes Mask Register</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ESR</name>
          <description>Edge Select Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LSR</name>
          <description>Level Select Register</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELSR</name>
          <description>Edge/Level Status Register</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FELLSR</name>
          <description>Falling Edge/Low Level Select Register</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REHLSR</name>
          <description>Rising Edge/ High Level Select Register</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FRLHSR</name>
          <description>Fall/Rise - Low/High Status Register</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LOCKSR</name>
          <description>Lock Status</description>
          <addressOffset>0x000000E0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Lock Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Lock Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Lock Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Lock Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Lock Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Lock Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Lock Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Lock Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Lock Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Lock Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Lock Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Lock Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Lock Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Lock Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Lock Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Lock Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Lock Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Lock Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Lock Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Lock Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Lock Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Lock Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Lock Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Lock Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Lock Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Lock Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Lock Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Lock Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Lock Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Lock Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Lock Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Lock Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCHMITT</name>
          <description>Schmitt Trigger Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SCHMITT0</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT1</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT2</name>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT3</name>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT4</name>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT5</name>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT6</name>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT7</name>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT8</name>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT9</name>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT10</name>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT11</name>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT12</name>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT13</name>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT14</name>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT15</name>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT16</name>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT17</name>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT18</name>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT19</name>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT20</name>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT21</name>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT22</name>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT23</name>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT24</name>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT25</name>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT26</name>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT27</name>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT28</name>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT29</name>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT30</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT31</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DELAYR</name>
          <description>IO Delay Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>Delay0</name>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay1</name>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay2</name>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay3</name>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay4</name>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay5</name>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay6</name>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay7</name>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DRIVER1</name>
          <description>I/O Drive Register 1</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LINE0</name>
              <description>Drive of PIO line 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE1</name>
              <description>Drive of PIO line 1</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE2</name>
              <description>Drive of PIO line 2</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE3</name>
              <description>Drive of PIO line 3</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE4</name>
              <description>Drive of PIO line 4</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE5</name>
              <description>Drive of PIO line 5</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE6</name>
              <description>Drive of PIO line 6</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE7</name>
              <description>Drive of PIO line 7</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE8</name>
              <description>Drive of PIO line 8</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE9</name>
              <description>Drive of PIO line 9</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE10</name>
              <description>Drive of PIO line 10</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE11</name>
              <description>Drive of PIO line 11</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE12</name>
              <description>Drive of PIO line 12</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE13</name>
              <description>Drive of PIO line 13</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE14</name>
              <description>Drive of PIO line 14</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE15</name>
              <description>Drive of PIO line 15</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DRIVER2</name>
          <description>I/O Drive Register 2</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LINE16</name>
              <description>Drive of PIO line 16</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE17</name>
              <description>Drive of PIO line 17</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE18</name>
              <description>Drive of PIO line 18</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE19</name>
              <description>Drive of PIO line 19</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE20</name>
              <description>Drive of PIO line 20</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE21</name>
              <description>Drive of PIO line 21</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE22</name>
              <description>Drive of PIO line 22</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE23</name>
              <description>Drive of PIO line 23</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE24</name>
              <description>Drive of PIO line 24</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE25</name>
              <description>Drive of PIO line 25</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE26</name>
              <description>Drive of PIO line 26</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE27</name>
              <description>Drive of PIO line 27</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE28</name>
              <description>Drive of PIO line 28</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE29</name>
              <description>Drive of PIO line 29</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE30</name>
              <description>Drive of PIO line 30</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE31</name>
              <description>Drive of PIO line 31</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PIOD</name>
      <version>11004F</version>
      <description>Parallel Input/Output Controller D</description>
      <groupName>PIO</groupName>
      <prependToName>PIOD_</prependToName>
      <baseAddress>0xFFFFFA00</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>PER</name>
          <description>PIO Enable Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDR</name>
          <description>PIO Disable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PSR</name>
          <description>PIO Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OER</name>
          <description>Output Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODR</name>
          <description>Output Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OSR</name>
          <description>Output Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFER</name>
          <description>Glitch Input Filter Enable Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFDR</name>
          <description>Glitch Input Filter Disable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filter Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filter Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filter Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filter Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filter Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filter Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filter Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filter Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filter Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filter Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filter Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filter Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filter Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filter Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filter Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filter Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filter Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filter Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filter Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filter Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filter Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filter Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filter Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filter Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filter Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filter Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filter Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filter Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filter Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filter Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filter Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filter Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSR</name>
          <description>Glitch Input Filter Status Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Filer Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Filer Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Filer Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Filer Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Filer Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Filer Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Filer Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Filer Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Filer Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Filer Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Filer Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Filer Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Filer Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Filer Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Filer Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Filer Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Filer Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Filer Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Filer Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Filer Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Filer Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Filer Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Filer Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Filer Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Filer Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Filer Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Filer Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Filer Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Filer Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Filer Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Filer Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Filer Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SODR</name>
          <description>Set Output Data Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Set Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Set Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Set Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Set Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Set Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Set Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Set Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Set Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Set Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Set Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Set Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Set Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Set Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Set Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Set Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Set Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Set Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Set Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Set Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Set Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Set Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Set Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Set Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Set Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Set Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Set Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Set Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Set Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Set Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Set Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Set Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Set Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CODR</name>
          <description>Clear Output Data Register</description>
          <addressOffset>0x00000034</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Clear Output Data</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Clear Output Data</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Clear Output Data</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Clear Output Data</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Clear Output Data</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Clear Output Data</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Clear Output Data</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Clear Output Data</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Clear Output Data</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Clear Output Data</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Clear Output Data</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Clear Output Data</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Clear Output Data</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Clear Output Data</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Clear Output Data</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Clear Output Data</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Clear Output Data</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Clear Output Data</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Clear Output Data</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Clear Output Data</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Clear Output Data</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Clear Output Data</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Clear Output Data</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Clear Output Data</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Clear Output Data</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Clear Output Data</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Clear Output Data</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Clear Output Data</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Clear Output Data</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Clear Output Data</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Clear Output Data</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Clear Output Data</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ODSR</name>
          <description>Output Data Status Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PDSR</name>
          <description>Pin Data Status Register</description>
          <addressOffset>0x0000003C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Data Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Data Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Data Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Data Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Data Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Data Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Data Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Data Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Data Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Data Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Data Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Data Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Data Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Data Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Data Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Data Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Data Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Data Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Data Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Data Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Data Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Data Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Data Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Data Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Data Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Data Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Data Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Data Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Data Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Data Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Data Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Data Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000044</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000048</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Mask</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ISR</name>
          <description>Interrupt Status Register</description>
          <addressOffset>0x0000004C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Input Change Interrupt Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDER</name>
          <description>Multi-driver Enable Register</description>
          <addressOffset>0x00000050</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDDR</name>
          <description>Multi-driver Disable Register</description>
          <addressOffset>0x00000054</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MDSR</name>
          <description>Multi-driver Status Register</description>
          <addressOffset>0x00000058</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Multi Drive Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Multi Drive Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Multi Drive Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Multi Drive Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Multi Drive Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Multi Drive Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Multi Drive Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Multi Drive Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Multi Drive Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Multi Drive Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Multi Drive Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Multi Drive Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Multi Drive Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Multi Drive Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Multi Drive Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Multi Drive Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Multi Drive Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Multi Drive Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Multi Drive Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Multi Drive Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Multi Drive Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Multi Drive Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Multi Drive Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Multi Drive Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Multi Drive Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Multi Drive Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Multi Drive Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Multi Drive Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Multi Drive Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Multi Drive Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Multi Drive Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Multi Drive Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUDR</name>
          <description>Pull-up Disable Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUER</name>
          <description>Pull-up Enable Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PUSR</name>
          <description>Pad Pull-up Status Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Up Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Up Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Up Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Up Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Up Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Up Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Up Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Up Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Up Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Up Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Up Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Up Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Up Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Up Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Up Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Up Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Up Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Up Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Up Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Up Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Up Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Up Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Up Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Up Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Up Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Up Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Up Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Up Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Up Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Up Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Up Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Up Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-1</dimIndex>
          <name>ABCDSR[%s]</name>
          <description>Peripheral Select Register</description>
          <addressOffset>0x00000070</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSCDR</name>
          <description>Input Filter Slow Clock Disable Register</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>PIO Clock Glitch Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSCER</name>
          <description>Input Filter Slow Clock Enable Register</description>
          <addressOffset>0x00000084</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Debouncing Filtering Select.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IFSCSR</name>
          <description>Input Filter Slow Clock Status Register</description>
          <addressOffset>0x00000088</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Glitch or Debouncing Filter Selection Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCDR</name>
          <description>Slow Clock Divider Debouncing Register</description>
          <addressOffset>0x0000008C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>DIV</name>
              <bitOffset>0</bitOffset>
              <bitWidth>14</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PPDDR</name>
          <description>Pad Pull-down Disable Register</description>
          <addressOffset>0x00000090</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Down Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Down Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Down Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Down Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Down Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Down Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Down Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Down Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Down Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Down Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Down Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Down Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Down Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Down Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Down Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Down Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Down Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Down Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Down Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Down Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Down Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Down Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Down Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Down Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Down Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Down Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Down Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Down Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Down Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Down Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Down Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Down Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PPDER</name>
          <description>Pad Pull-down Enable Register</description>
          <addressOffset>0x00000094</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Down Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Down Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Down Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Down Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Down Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Down Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Down Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Down Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Down Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Down Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Down Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Down Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Down Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Down Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Down Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Down Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Down Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Down Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Down Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Down Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Down Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Down Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Down Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Down Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Down Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Down Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Down Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Down Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Down Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Down Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Down Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Down Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PPDSR</name>
          <description>Pad Pull-down Status Register</description>
          <addressOffset>0x00000098</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Pull Down Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Pull Down Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Pull Down Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Pull Down Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Pull Down Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Pull Down Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Pull Down Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Pull Down Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Pull Down Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Pull Down Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Pull Down Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Pull Down Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Pull Down Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Pull Down Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Pull Down Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Pull Down Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Pull Down Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Pull Down Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Pull Down Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Pull Down Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Pull Down Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Pull Down Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Pull Down Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Pull Down Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Pull Down Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Pull Down Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Pull Down Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Pull Down Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Pull Down Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Pull Down Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Pull Down Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Pull Down Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWER</name>
          <description>Output Write Enable</description>
          <addressOffset>0x000000A0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWDR</name>
          <description>Output Write Disable</description>
          <addressOffset>0x000000A4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>OWSR</name>
          <description>Output Write Status Register</description>
          <addressOffset>0x000000A8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Output Write Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Output Write Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Output Write Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Output Write Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Output Write Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Output Write Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Output Write Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Output Write Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Output Write Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Output Write Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Output Write Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Output Write Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Output Write Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Output Write Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Output Write Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Output Write Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Output Write Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Output Write Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Output Write Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Output Write Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Output Write Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Output Write Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Output Write Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Output Write Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Output Write Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Output Write Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Output Write Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Output Write Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Output Write Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Output Write Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Output Write Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Output Write Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMER</name>
          <description>Additional Interrupt Modes Enable Register</description>
          <addressOffset>0x000000B0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Enable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMDR</name>
          <description>Additional Interrupt Modes Disables Register</description>
          <addressOffset>0x000000B4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Additional Interrupt Modes Disable.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>AIMMR</name>
          <description>Additional Interrupt Modes Mask Register</description>
          <addressOffset>0x000000B8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Peripheral CD Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ESR</name>
          <description>Edge Select Register</description>
          <addressOffset>0x000000C0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LSR</name>
          <description>Level Select Register</description>
          <addressOffset>0x000000C4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>ELSR</name>
          <description>Edge/Level Status Register</description>
          <addressOffset>0x000000C8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge/Level Interrupt source selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FELLSR</name>
          <description>Falling Edge/Low Level Select Register</description>
          <addressOffset>0x000000D0</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Falling Edge/Low Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>REHLSR</name>
          <description>Rising Edge/ High Level Select Register</description>
          <addressOffset>0x000000D4</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>P0</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Rising Edge /High Level Interrupt Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>FRLHSR</name>
          <description>Fall/Rise - Low/High Status Register</description>
          <addressOffset>0x000000D8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Edge /Level Interrupt Source Selection.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>LOCKSR</name>
          <description>Lock Status</description>
          <addressOffset>0x000000E0</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>P0</name>
              <description>Lock Status.</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P1</name>
              <description>Lock Status.</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P2</name>
              <description>Lock Status.</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P3</name>
              <description>Lock Status.</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P4</name>
              <description>Lock Status.</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P5</name>
              <description>Lock Status.</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P6</name>
              <description>Lock Status.</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P7</name>
              <description>Lock Status.</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P8</name>
              <description>Lock Status.</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P9</name>
              <description>Lock Status.</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P10</name>
              <description>Lock Status.</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P11</name>
              <description>Lock Status.</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P12</name>
              <description>Lock Status.</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P13</name>
              <description>Lock Status.</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P14</name>
              <description>Lock Status.</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P15</name>
              <description>Lock Status.</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P16</name>
              <description>Lock Status.</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P17</name>
              <description>Lock Status.</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P18</name>
              <description>Lock Status.</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P19</name>
              <description>Lock Status.</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P20</name>
              <description>Lock Status.</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P21</name>
              <description>Lock Status.</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P22</name>
              <description>Lock Status.</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P23</name>
              <description>Lock Status.</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P24</name>
              <description>Lock Status.</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P25</name>
              <description>Lock Status.</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P26</name>
              <description>Lock Status.</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P27</name>
              <description>Lock Status.</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P28</name>
              <description>Lock Status.</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P29</name>
              <description>Lock Status.</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P30</name>
              <description>Lock Status.</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>P31</name>
              <description>Lock Status.</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCHMITT</name>
          <description>Schmitt Trigger Register</description>
          <addressOffset>0x00000100</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SCHMITT0</name>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT1</name>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT2</name>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT3</name>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT4</name>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT5</name>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT6</name>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT7</name>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT8</name>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT9</name>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT10</name>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT11</name>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT12</name>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT13</name>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT14</name>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT15</name>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT16</name>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT17</name>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT18</name>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT19</name>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT20</name>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT21</name>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT22</name>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT23</name>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT24</name>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT25</name>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT26</name>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT27</name>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT28</name>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT29</name>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT30</name>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SCHMITT31</name>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DELAYR</name>
          <description>IO Delay Register</description>
          <addressOffset>0x00000110</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>Delay0</name>
              <bitOffset>0</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay1</name>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay2</name>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay3</name>
              <bitOffset>12</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay4</name>
              <bitOffset>16</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay5</name>
              <bitOffset>20</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay6</name>
              <bitOffset>24</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>Delay7</name>
              <bitOffset>28</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>DRIVER1</name>
          <description>I/O Drive Register 1</description>
          <addressOffset>0x00000114</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LINE0</name>
              <description>Drive of PIO line 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE1</name>
              <description>Drive of PIO line 1</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE2</name>
              <description>Drive of PIO line 2</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE3</name>
              <description>Drive of PIO line 3</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE4</name>
              <description>Drive of PIO line 4</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE5</name>
              <description>Drive of PIO line 5</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE6</name>
              <description>Drive of PIO line 6</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE7</name>
              <description>Drive of PIO line 7</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE8</name>
              <description>Drive of PIO line 8</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE9</name>
              <description>Drive of PIO line 9</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE10</name>
              <description>Drive of PIO line 10</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE11</name>
              <description>Drive of PIO line 11</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE12</name>
              <description>Drive of PIO line 12</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE13</name>
              <description>Drive of PIO line 13</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE14</name>
              <description>Drive of PIO line 14</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE15</name>
              <description>Drive of PIO line 15</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DRIVER2</name>
          <description>I/O Drive Register 2</description>
          <addressOffset>0x00000118</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LINE16</name>
              <description>Drive of PIO line 16</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE17</name>
              <description>Drive of PIO line 17</description>
              <bitOffset>2</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE18</name>
              <description>Drive of PIO line 18</description>
              <bitOffset>4</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE19</name>
              <description>Drive of PIO line 19</description>
              <bitOffset>6</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE20</name>
              <description>Drive of PIO line 20</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE21</name>
              <description>Drive of PIO line 21</description>
              <bitOffset>10</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE22</name>
              <description>Drive of PIO line 22</description>
              <bitOffset>12</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE23</name>
              <description>Drive of PIO line 23</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE24</name>
              <description>Drive of PIO line 24</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE25</name>
              <description>Drive of PIO line 25</description>
              <bitOffset>18</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE26</name>
              <description>Drive of PIO line 26</description>
              <bitOffset>20</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE27</name>
              <description>Drive of PIO line 27</description>
              <bitOffset>22</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE28</name>
              <description>Drive of PIO line 28</description>
              <bitOffset>24</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE29</name>
              <description>Drive of PIO line 29</description>
              <bitOffset>26</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE30</name>
              <description>Drive of PIO line 30</description>
              <bitOffset>28</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LINE31</name>
              <description>Drive of PIO line 31</description>
              <bitOffset>30</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>HI_DRIVE</name>
                  <description>High drive</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ME_DRIVE</name>
                  <description>Medium drive</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LO_DRIVE</name>
                  <description>Low drive</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PMC</name>
      <version>11070A</version>
      <description>Power Management Controller</description>
      <baseAddress>0xFFFFFC00</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x200</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>PMC_SCER</name>
          <description>System Clock Enable Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>DDRCK</name>
              <description>DDR Clock Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LCDCK</name>
              <description>LCD Clock Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UHP</name>
              <description>USB Host OHCI Clocks Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UDP</name>
              <description>USB Device Clock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCK0</name>
              <description>Programmable Clock 0 Output Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCK1</name>
              <description>Programmable Clock 1 Output Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_SCDR</name>
          <description>System Clock Disable Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>PCK</name>
              <description>Processor Clock Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>DDRCK</name>
              <description>DDR Clock Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LCDCK</name>
              <description>LCD Clock Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UHP</name>
              <description>USB Host OHCI Clock Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>UDP</name>
              <description>USB Device Clock Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCK0</name>
              <description>Programmable Clock 0 Output Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCK1</name>
              <description>Programmable Clock 1 Output Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_SCSR</name>
          <description>System Clock Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000005</resetValue>
          <fields>
            <field>
              <name>PCK</name>
              <description>Processor Clock Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>DDRCK</name>
              <description>DDR Clock Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LCDCK</name>
              <description>LCD Clock Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UHP</name>
              <description>USB Host Port Clock Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>UDP</name>
              <description>USB Device Port Clock Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCK0</name>
              <description>Programmable Clock 0 Output Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCK1</name>
              <description>Programmable Clock 1 Output Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_PCER</name>
          <description>Peripheral Clock Enable Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>PID2</name>
              <description>Peripheral Clock 2 Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Peripheral Clock 3 Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Peripheral Clock 4 Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Peripheral Clock 5 Enable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Peripheral Clock 6 Enable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Peripheral Clock 7 Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Peripheral Clock 8 Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Peripheral Clock 9 Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Peripheral Clock 10 Enable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Peripheral Clock 11 Enable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Peripheral Clock 12 Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Peripheral Clock 13 Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Peripheral Clock 14 Enable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Peripheral Clock 15 Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Peripheral Clock 16 Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Peripheral Clock 17 Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Peripheral Clock 18 Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Peripheral Clock 19 Enable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Peripheral Clock 20 Enable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Peripheral Clock 21 Enable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Peripheral Clock 22 Enable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Peripheral Clock 23 Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Peripheral Clock 24 Enable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Peripheral Clock 25 Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Peripheral Clock 26 Enable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Peripheral Clock 27 Enable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Peripheral Clock 28 Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Peripheral Clock 29 Enable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Peripheral Clock 30 Enable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Peripheral Clock 31 Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_PCDR</name>
          <description>Peripheral Clock Disable Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>PID2</name>
              <description>Peripheral Clock 2 Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Peripheral Clock 3 Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Peripheral Clock 4 Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Peripheral Clock 5 Disable</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Peripheral Clock 6 Disable</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Peripheral Clock 7 Disable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Peripheral Clock 8 Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Peripheral Clock 9 Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Peripheral Clock 10 Disable</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Peripheral Clock 11 Disable</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Peripheral Clock 12 Disable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Peripheral Clock 13 Disable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Peripheral Clock 14 Disable</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Peripheral Clock 15 Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Peripheral Clock 16 Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Peripheral Clock 17 Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Peripheral Clock 18 Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Peripheral Clock 19 Disable</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Peripheral Clock 20 Disable</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Peripheral Clock 21 Disable</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Peripheral Clock 22 Disable</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Peripheral Clock 23 Disable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Peripheral Clock 24 Disable</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Peripheral Clock 25 Disable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Peripheral Clock 26 Disable</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Peripheral Clock 27 Disable</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Peripheral Clock 28 Disable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Peripheral Clock 29 Disable</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Peripheral Clock 30 Disable</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Peripheral Clock 31 Disable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_PCSR</name>
          <description>Peripheral Clock Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PID2</name>
              <description>Peripheral Clock 2 Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID3</name>
              <description>Peripheral Clock 3 Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID4</name>
              <description>Peripheral Clock 4 Status</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID5</name>
              <description>Peripheral Clock 5 Status</description>
              <bitOffset>5</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID6</name>
              <description>Peripheral Clock 6 Status</description>
              <bitOffset>6</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID7</name>
              <description>Peripheral Clock 7 Status</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID8</name>
              <description>Peripheral Clock 8 Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID9</name>
              <description>Peripheral Clock 9 Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID10</name>
              <description>Peripheral Clock 10 Status</description>
              <bitOffset>10</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID11</name>
              <description>Peripheral Clock 11 Status</description>
              <bitOffset>11</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID12</name>
              <description>Peripheral Clock 12 Status</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID13</name>
              <description>Peripheral Clock 13 Status</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID14</name>
              <description>Peripheral Clock 14 Status</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID15</name>
              <description>Peripheral Clock 15 Status</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID16</name>
              <description>Peripheral Clock 16 Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID17</name>
              <description>Peripheral Clock 17 Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID18</name>
              <description>Peripheral Clock 18 Status</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID19</name>
              <description>Peripheral Clock 19 Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID20</name>
              <description>Peripheral Clock 20 Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID21</name>
              <description>Peripheral Clock 21 Status</description>
              <bitOffset>21</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID22</name>
              <description>Peripheral Clock 22 Status</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID23</name>
              <description>Peripheral Clock 23 Status</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID24</name>
              <description>Peripheral Clock 24 Status</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID25</name>
              <description>Peripheral Clock 25 Status</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID26</name>
              <description>Peripheral Clock 26 Status</description>
              <bitOffset>26</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID27</name>
              <description>Peripheral Clock 27 Status</description>
              <bitOffset>27</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID28</name>
              <description>Peripheral Clock 28 Status</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID29</name>
              <description>Peripheral Clock 29 Status</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID30</name>
              <description>Peripheral Clock 30 Status</description>
              <bitOffset>30</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PID31</name>
              <description>Peripheral Clock 31 Status</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CKGR_MOR</name>
          <description>Main Oscillator Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01000001</resetValue>
          <fields>
            <field>
              <name>MOSCXTEN</name>
              <description>Main Crystal Oscillator Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOSCXTBY</name>
              <description>Main Crystal Oscillator Bypass</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOSCRCEN</name>
              <description>Main On-Chip RC Oscillator Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOSCXTST</name>
              <description>Main Crystal Oscillator Start-up Time</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>KEY</name>
              <description>Password</description>
              <bitOffset>16</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MOSCSEL</name>
              <description>Main Oscillator Selection</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CFDEN</name>
              <description>Clock Failure Detector Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CKGR_MCFR</name>
          <description>Main Clock Frequency Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MAINF</name>
              <description>Main Clock Frequency</description>
              <bitOffset>0</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MAINFRDY</name>
              <description>Main Clock Ready</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RCMEAS</name>
              <description>RC Measure</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CKGR_PLLAR</name>
          <description>PLLA Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00003F00</resetValue>
          <fields>
            <field>
              <name>DIVA</name>
              <description>Divider A</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PLLACOUNT</name>
              <description>PLLA Counter</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OUTA</name>
              <description>PLLA Clock Frequency Range</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MULA</name>
              <description>PLLA Multiplier</description>
              <bitOffset>16</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>STUCKTO1</name>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CKGR_PLLBR</name>
          <description>PLLB Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00003F00</resetValue>
          <fields>
            <field>
              <name>DIVB</name>
              <description>Divider B</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PLLBCOUNT</name>
              <description>PLLB Counter</description>
              <bitOffset>8</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OUTB</name>
              <description>PLLB Clock Frequency Range</description>
              <bitOffset>14</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MULB</name>
              <description>PLLB Multiplier</description>
              <bitOffset>16</bitOffset>
              <bitWidth>11</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_MCKR</name>
          <description>Master Clock Register</description>
          <addressOffset>0x00000030</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>CSS</name>
              <description>Master/Processor Clock Source Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SLOW_CLK</name>
                  <description>Slow Clock is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MAIN_CLK</name>
                  <description>Main Clock is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PLLA_CLK</name>
                  <description>PLLACK/PLLADIV2 is selected</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PLLB_CLK</name>
                  <description>PLLBCK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRES</name>
              <description>Master/Processor Clock Prescaler</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CLOCK_DIV1</name>
                  <description>Selected clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLOCK_DIV2</name>
                  <description>Selected clock divided by 2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLOCK_DIV4</name>
                  <description>Selected clock divided by 4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLOCK_DIV8</name>
                  <description>Selected clock divided by 8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLOCK_DIV16</name>
                  <description>Selected clock divided by 16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLOCK_DIV32</name>
                  <description>Selected clock divided by 32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLOCK_DIV64</name>
                  <description>Selected clock divided by 64</description>
                  <value>0x6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MDIV</name>
              <description>Master Clock Division</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>EQ_PCK</name>
                  <description>Master Clock is Prescaler Output Clock divided by 1.Warning: SysClk DDR and DDRCK are not available.</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PCK_DIV2</name>
                  <description>Master Clock is Prescaler Output Clock divided by 2.SysClk DDR is equal to 2 x MCK. DDRCK is equal to MCK.</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PCK_DIV4</name>
                  <description>Master Clock is Prescaler Output Clock divided by 4.SysClk DDR is equal to 2 x MCK. DDRCK is equal to MCK.</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PCK_DIV3</name>
                  <description>Master Clock is Prescaler Output Clock divided by 3.SysClk DDR is equal to 2 x MCK. DDRCK is equal to MCK.</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PLLADIV2</name>
              <description>PLLA divisor by 2</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NOT_DIV2</name>
                  <description>PLLA clock frequency is divided by 1.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV2</name>
                  <description>PLLA clock frequency is divided by 2.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_USB</name>
          <description>USB Clock Register</description>
          <addressOffset>0x00000038</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>USBS</name>
              <description>USB OHCI Input Clock Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>USBDIV</name>
              <description>Divider for USB Clock</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-1</dimIndex>
          <name>PMC_PCK[%s]</name>
          <description>Programmable Clock 0 Register</description>
          <addressOffset>0x00000040</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>CSS</name>
              <description>Master Clock Source Selection</description>
              <bitOffset>0</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SLOW_CLK</name>
                  <description>Slow Clock is selected</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MAIN_CLK</name>
                  <description>Main Clock is selected</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PLLA_CLK</name>
                  <description>PLLACK/PLLADIV2 is selected</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PLLB_CLK</name>
                  <description>PLLBCK is selected</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MCK_CLK</name>
                  <description>Master Clock is selected</description>
                  <value>0x4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRES</name>
              <description>Programmable Clock Prescaler</description>
              <bitOffset>4</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CLOCK_DIV1</name>
                  <description>Selected clock</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLOCK_DIV2</name>
                  <description>Selected clock divided by 2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLOCK_DIV4</name>
                  <description>Selected clock divided by 4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLOCK_DIV8</name>
                  <description>Selected clock divided by 8</description>
                  <value>0x3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLOCK_DIV16</name>
                  <description>Selected clock divided by 16</description>
                  <value>0x4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLOCK_DIV32</name>
                  <description>Selected clock divided by 32</description>
                  <value>0x5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CLOCK_DIV64</name>
                  <description>Selected clock divided by 64</description>
                  <value>0x6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000060</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MOSCXTS</name>
              <description>Main Crystal Oscillator Status Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOCKA</name>
              <description>PLLA Lock Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOCKB</name>
              <description>PLLB Lock Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MCKRDY</name>
              <description>Master Clock Ready Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCKRDY0</name>
              <description>Programmable Clock Ready 0 Interrupt Enable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCKRDY1</name>
              <description>Programmable Clock Ready 1 Interrupt Enable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MOSCSELS</name>
              <description>Main Oscillator Selection Status Interrupt Enable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MOSCRCS</name>
              <description>Main On-Chip RC Status Interrupt Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CFDEV</name>
              <description>Clock Failure Detector Event Interrupt Enable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000064</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>MOSCXTS</name>
              <description>Main Crystal Oscillator Status Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOCKA</name>
              <description>PLLA Lock Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>LOCKB</name>
              <description>PLLB Lock Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MCKRDY</name>
              <description>Master Clock Ready Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCKRDY0</name>
              <description>Programmable Clock Ready 0 Interrupt Disable</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PCKRDY1</name>
              <description>Programmable Clock Ready 1 Interrupt Disable</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MOSCSELS</name>
              <description>Main Oscillator Selection Status Interrupt Disable</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>MOSCRCS</name>
              <description>Main On-Chip RC Status Interrupt Disable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CFDEV</name>
              <description>Clock Failure Detector Event Interrupt Disable</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000068</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00010008</resetValue>
          <fields>
            <field>
              <name>MOSCXTS</name>
              <description>Main XTAL Oscillator Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOCKA</name>
              <description>PLLA Lock Status</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOCKB</name>
              <description>PLLB Lock Status</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MCKRDY</name>
              <description>Master Clock Status</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>OSCSELS</name>
              <description>Slow Clock Oscillator Selection</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCKRDY0</name>
              <description>Programmable Clock Ready Status</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCKRDY1</name>
              <description>Programmable Clock Ready Status</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MOSCSELS</name>
              <description>Main Oscillator Selection Status</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MOSCRCS</name>
              <description>Main On-Chip RC Oscillator Status</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CFDEV</name>
              <description>Clock Failure Detector Event</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CFDS</name>
              <description>Clock Failure Detector Status</description>
              <bitOffset>19</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>FOS</name>
              <description>Clock Failure Detector Fault Output Status</description>
              <bitOffset>20</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x0000006C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>MOSCXTS</name>
              <description>Main Crystal Oscillator Status Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOCKA</name>
              <description>PLLA Lock Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>LOCKB</name>
              <description>PLLB Lock Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MCKRDY</name>
              <description>Master Clock Ready Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCKRDY0</name>
              <description>Programmable Clock Ready 0 Interrupt Mask</description>
              <bitOffset>8</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PCKRDY1</name>
              <description>Programmable Clock Ready 1 Interrupt Mask</description>
              <bitOffset>9</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MOSCSELS</name>
              <description>Main Oscillator Selection Status Interrupt Mask</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>MOSCRCS</name>
              <description>Main On-Chip RC Status Interrupt Mask</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CFDEV</name>
              <description>Clock Failure Detector Event Interrupt Mask</description>
              <bitOffset>18</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_PLLICPR</name>
          <description>PLL Charge Pump Current Register</description>
          <addressOffset>0x00000080</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <resetValue>0x01000100</resetValue>
          <fields>
            <field>
              <name>ICPLLA</name>
              <description>Charge Pump Current</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_WPMR</name>
          <description>Write Protect Mode Register</description>
          <addressOffset>0x000000E4</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPEN</name>
              <description>Write Protect Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WPKEY</name>
              <description>Write Protect KEY</description>
              <bitOffset>8</bitOffset>
              <bitWidth>24</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_WPSR</name>
          <description>Write Protect Status Register</description>
          <addressOffset>0x000000E8</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WPVS</name>
              <description>Write Protect Violation Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WPVSRC</name>
              <description>Write Protect Violation Source</description>
              <bitOffset>8</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PMC_PCR</name>
          <description>Peripheral Control Register</description>
          <addressOffset>0x0000010C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PID</name>
              <description>Peripheral ID</description>
              <bitOffset>0</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CMD</name>
              <description>Command</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DIV</name>
              <description>Divisor value</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>PERIPH_DIV_MCK</name>
                  <description>Peripheral clock is MCK</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PERIPH_DIV2_MCK</name>
                  <description>Peripheral clock is MCK/2</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PERIPH_DIV4_MCK</name>
                  <description>Peripheral clock is MCK/4</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>PERIPH_DIV8_MCK</name>
                  <description>Peripheral clock is MCK/8</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EN</name>
              <description>Enable</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>RSTC</name>
      <version>6098I</version>
      <description>Reset Controller</description>
      <groupName>SYSC</groupName>
      <prependToName>RSTC_</prependToName>
      <baseAddress>0xFFFFFE00</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0xC</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>PROCRST</name>
              <description>Processor Reset</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>PERRST</name>
              <description>Peripheral Reset</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>EXTRST</name>
              <description>External Reset</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEY</name>
              <description>Password</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>URSTS</name>
              <description>User Reset Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RSTTYP</name>
              <description>Reset Type</description>
              <bitOffset>8</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NRSTL</name>
              <description>NRST Pin Level</description>
              <bitOffset>16</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SRCMP</name>
              <description>Software Reset Command in Progress</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>ERSTL</name>
              <description>External Reset Length</description>
              <bitOffset>8</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>KEY</name>
              <description>Password</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SHDWC</name>
      <version>6122K</version>
      <description>Shutdown Controller</description>
      <groupName>SYSC</groupName>
      <prependToName>SHDWC_</prependToName>
      <baseAddress>0xFFFFFE10</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0xC</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CR</name>
          <description>Shutdown Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>SHDW</name>
              <description>Shutdown Command</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEY</name>
              <description>Password</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Shutdown Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000303</resetValue>
          <fields>
            <field>
              <name>WKMODE0</name>
              <description>Wake-up Mode 0</description>
              <bitOffset>0</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>CPTWK0</name>
              <description>Counter on Wake-up 0</description>
              <bitOffset>4</bitOffset>
              <bitWidth>4</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>RTCWKEN</name>
              <description>Real-time Clock Wake-up Enable</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Shutdown Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WAKEUP0</name>
              <description>Wake-up 0 Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>RTCWK</name>
              <description>Real-time Clock Wake-up</description>
              <bitOffset>17</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PIT</name>
      <version>6079B</version>
      <description>Periodic Interval Timer</description>
      <groupName>SYSC</groupName>
      <prependToName>PIT_</prependToName>
      <baseAddress>0xFFFFFE30</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x10</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x000FFFFF</resetValue>
          <fields>
            <field>
              <name>PIV</name>
              <description>Periodic Interval Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>20</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PITEN</name>
              <description>Period Interval Timer Enabled</description>
              <bitOffset>24</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>PITIEN</name>
              <description>Periodic Interval Timer Interrupt Enable</description>
              <bitOffset>25</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PITS</name>
              <description>Periodic Interval Timer Status</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PIVR</name>
          <description>Periodic Interval Value Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPIV</name>
              <description>Current Periodic Interval Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>20</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PICNT</name>
              <description>Periodic Interval Counter</description>
              <bitOffset>20</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>PIIR</name>
          <description>Periodic Interval Image Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CPIV</name>
              <description>Current Periodic Interval Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>20</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>PICNT</name>
              <description>Periodic Interval Counter</description>
              <bitOffset>20</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>WDT</name>
      <version>6080B</version>
      <description>Watchdog Timer</description>
      <groupName>SYSC</groupName>
      <prependToName>WDT_</prependToName>
      <baseAddress>0xFFFFFE40</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0xC</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>WDRSTT</name>
              <description>Watchdog Restart</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>KEY</name>
              <description>Password</description>
              <bitOffset>24</bitOffset>
              <bitWidth>8</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x3FFF2FFF</resetValue>
          <fields>
            <field>
              <name>WDV</name>
              <description>Watchdog Counter Value</description>
              <bitOffset>0</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDFIEN</name>
              <description>Watchdog Fault Interrupt Enable</description>
              <bitOffset>12</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDRSTEN</name>
              <description>Watchdog Reset Enable</description>
              <bitOffset>13</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDRPROC</name>
              <description>Watchdog Reset Processor</description>
              <bitOffset>14</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDDIS</name>
              <description>Watchdog Disable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDD</name>
              <description>Watchdog Delta Value</description>
              <bitOffset>16</bitOffset>
              <bitWidth>12</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDDBGHLT</name>
              <description>Watchdog Debug Halt</description>
              <bitOffset>28</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>WDIDLEHLT</name>
              <description>Watchdog Idle Halt</description>
              <bitOffset>29</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>WDUNF</name>
              <description>Watchdog Underflow</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>WDERR</name>
              <description>Watchdog Error</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SCKC</name>
      <version>11073B</version>
      <description>Slow Clock Controller</description>
      <groupName>SYSC</groupName>
      <prependToName>SCKC_</prependToName>
      <baseAddress>0xFFFFFE50</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CR</name>
          <description>Slow Clock Configuration Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>RCEN</name>
              <description>Internal 32 kHz RC Oscillator</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSC32EN</name>
              <description>32,768 Hz Oscillator</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSC32BYP</name>
              <description>32,768Hz Oscillator Bypass</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>OSCSEL</name>
              <description>Slow Clock Selector</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RC</name>
                  <description>Slow clock is internal 32 kHz RC oscillator.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>XTAL</name>
                  <description>Slow clock is 32,768 Hz oscillator.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>BSC</name>
      <version>11072B</version>
      <description>Boot Sequence Controller</description>
      <groupName>SYSC</groupName>
      <prependToName>BSC_</prependToName>
      <baseAddress>0xFFFFFE54</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x4</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CR</name>
          <description>Boot Sequence Configuration Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>BOOT</name>
              <description>Boot media sequence</description>
              <bitOffset>0</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>BOOTKEY</name>
              <bitOffset>16</bitOffset>
              <bitWidth>16</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>BSC_KEY</name>
                  <description>valid key to write BSC_CR register; it needs to be written at the same time as the BOOT field.</description>
                  <value>0x6683</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>GPBR</name>
      <version>6378C</version>
      <description>General Purpose Backup Register</description>
      <groupName>SYSC</groupName>
      <prependToName>GPBR_</prependToName>
      <baseAddress>0xFFFFFE60</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x10</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <dim>4</dim>
          <dimIncrement>4</dimIncrement>
          <dimIndex>0-3</dimIndex>
          <name>GPBR[%s]</name>
          <description>General Purpose Backup Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <fields>
            <field>
              <name>GPBR_VALUE</name>
              <description>Value of GPBR x</description>
              <bitOffset>0</bitOffset>
              <bitWidth>32</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>RTC</name>
      <version>6056I</version>
      <description>Real-time Clock</description>
      <prependToName>RTC_</prependToName>
      <baseAddress>0xFFFFFEB0</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x30</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CR</name>
          <description>Control Register</description>
          <addressOffset>0x00000000</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>UPDTIM</name>
              <description>Update Request Time Register</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>UPDCAL</name>
              <description>Update Request Calendar Register</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>TIMEVSEL</name>
              <description>Time Event Selection</description>
              <bitOffset>8</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MINUTE</name>
                  <description>Minute change</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HOUR</name>
                  <description>Hour change</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MIDNIGHT</name>
                  <description>Every day at midnight</description>
                  <value>0x2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NOON</name>
                  <description>Every day at noon</description>
                  <value>0x3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALEVSEL</name>
              <description>Calendar Event Selection</description>
              <bitOffset>16</bitOffset>
              <bitWidth>2</bitWidth>
              <access>read-write</access>
              <enumeratedValues>
                <enumeratedValue>
                  <name>WEEK</name>
                  <description>Week change (every Monday at time 00:00:00)</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MONTH</name>
                  <description>Month change (every 01 of each month at time 00:00:00)</description>
                  <value>0x1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>YEAR</name>
                  <description>Year change (every January 1 at time 00:00:00)</description>
                  <value>0x2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MR</name>
          <description>Mode Register</description>
          <addressOffset>0x00000004</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>HRMOD</name>
              <description>12-/24-hour Mode</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMR</name>
          <description>Time Register</description>
          <addressOffset>0x00000008</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SEC</name>
              <description>Current Second</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIN</name>
              <description>Current Minute</description>
              <bitOffset>8</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HOUR</name>
              <description>Current Hour</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>AMPM</name>
              <description>Ante Meridiem Post Meridiem Indicator</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CALR</name>
          <description>Calendar Register</description>
          <addressOffset>0x0000000C</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01210720</resetValue>
          <fields>
            <field>
              <name>CENT</name>
              <description>Current Century</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>YEAR</name>
              <description>Current Year</description>
              <bitOffset>8</bitOffset>
              <bitWidth>8</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MONTH</name>
              <description>Current Month</description>
              <bitOffset>16</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DAY</name>
              <description>Current Day in Current Week</description>
              <bitOffset>21</bitOffset>
              <bitWidth>3</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DATE</name>
              <description>Current Day in Current Month</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>TIMALR</name>
          <description>Time Alarm Register</description>
          <addressOffset>0x00000010</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>SEC</name>
              <description>Second Alarm</description>
              <bitOffset>0</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>SECEN</name>
              <description>Second Alarm Enable</description>
              <bitOffset>7</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MIN</name>
              <description>Minute Alarm</description>
              <bitOffset>8</bitOffset>
              <bitWidth>7</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MINEN</name>
              <description>Minute Alarm Enable</description>
              <bitOffset>15</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HOUR</name>
              <description>Hour Alarm</description>
              <bitOffset>16</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>AMPM</name>
              <description>AM/PM Indicator</description>
              <bitOffset>22</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>HOUREN</name>
              <description>Hour Alarm Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>CALALR</name>
          <description>Calendar Alarm Register</description>
          <addressOffset>0x00000014</addressOffset>
          <size>32</size>
          <access>read-write</access>
          <resetValue>0x01010000</resetValue>
          <fields>
            <field>
              <name>MONTH</name>
              <description>Month Alarm</description>
              <bitOffset>16</bitOffset>
              <bitWidth>5</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>MTHEN</name>
              <description>Month Alarm Enable</description>
              <bitOffset>23</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DATE</name>
              <description>Date Alarm</description>
              <bitOffset>24</bitOffset>
              <bitWidth>6</bitWidth>
              <access>read-write</access>
            </field>
            <field>
              <name>DATEEN</name>
              <description>Date Alarm Enable</description>
              <bitOffset>31</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-write</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SR</name>
          <description>Status Register</description>
          <addressOffset>0x00000018</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ACKUPD</name>
              <description>Acknowledge for Update</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ALARM</name>
              <description>Alarm Flag</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SEC</name>
              <description>Second Event</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIMEV</name>
              <description>Time Event</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CALEV</name>
              <description>Calendar Event</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>SCCR</name>
          <description>Status Clear Command Register</description>
          <addressOffset>0x0000001C</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>ACKCLR</name>
              <description>Acknowledge Clear</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ALRCLR</name>
              <description>Alarm Clear</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SECCLR</name>
              <description>Second Clear</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMCLR</name>
              <description>Time Clear</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CALCLR</name>
              <description>Calendar Clear</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IER</name>
          <description>Interrupt Enable Register</description>
          <addressOffset>0x00000020</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>ACKEN</name>
              <description>Acknowledge Update Interrupt Enable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ALREN</name>
              <description>Alarm Interrupt Enable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SECEN</name>
              <description>Second Event Interrupt Enable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMEN</name>
              <description>Time Event Interrupt Enable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CALEN</name>
              <description>Calendar Event Interrupt Enable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IDR</name>
          <description>Interrupt Disable Register</description>
          <addressOffset>0x00000024</addressOffset>
          <size>32</size>
          <access>write-only</access>
          <fields>
            <field>
              <name>ACKDIS</name>
              <description>Acknowledge Update Interrupt Disable</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>ALRDIS</name>
              <description>Alarm Interrupt Disable</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>SECDIS</name>
              <description>Second Event Interrupt Disable</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>TIMDIS</name>
              <description>Time Event Interrupt Disable</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
            <field>
              <name>CALDIS</name>
              <description>Calendar Event Interrupt Disable</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>write-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>IMR</name>
          <description>Interrupt Mask Register</description>
          <addressOffset>0x00000028</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ACK</name>
              <description>Acknowledge Update Interrupt Mask</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>ALR</name>
              <description>Alarm Interrupt Mask</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>SEC</name>
              <description>Second Event Interrupt Mask</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>TIM</name>
              <description>Time Event Interrupt Mask</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>CAL</name>
              <description>Calendar Event Interrupt Mask</description>
              <bitOffset>4</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
        <register>
          <name>VER</name>
          <description>Valid Entry Register</description>
          <addressOffset>0x0000002C</addressOffset>
          <size>32</size>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>NVTIM</name>
              <description>Non-valid Time</description>
              <bitOffset>0</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NVCAL</name>
              <description>Non-valid Calendar</description>
              <bitOffset>1</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NVTIMALR</name>
              <description>Non-valid Time Alarm</description>
              <bitOffset>2</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
            <field>
              <name>NVCALALR</name>
              <description>Non-valid Calendar Alarm</description>
              <bitOffset>3</bitOffset>
              <bitWidth>1</bitWidth>
              <access>read-only</access>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
  </peripherals>
</device>
<!-- Generated by        : SOCK v3.89.0_08                          -->
<!-- Source SCM revision : 3530                                     -->
<!-- Source SHA sum      : 9bd3ae6d28a3c19aa79e6f26faeda44f7e27eda3 -->