robofish/RMUL2025
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
xr版本有超电hero
RMUL2025/lib/cmsis_svd/data/Atmel/AT91SAM9M10.svd

89715 lines
3.1 MiB
Raw Permalink Blame History

<?xml version="1.0" encoding="UTF-8"?>
<!-- ============================================================================ -->
<!-- Atmel Microcontroller Software Support -->
<!-- SAM Software Package License -->
<!-- ============================================================================ -->
<!-- Copyright (c) 2013, Atmel Corporation -->
<!-- -->
<!-- All rights reserved. -->
<!-- -->
<!-- Redistribution and use in source and binary forms, with or without -->
<!-- modification, are permitted provided that the following condition is met: -->
<!-- -->
<!-- - Redistributions of source code must retain the above copyright notice, -->
<!-- this list of conditions and the disclaimer below. -->
<!-- -->
<!-- Atmel's name may not be used to endorse or promote products derived from -->
<!-- this software without specific prior written permission. -->
<!-- -->
<!-- DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR -->
<!-- IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE -->
<!-- DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, -->
<!-- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -->
<!-- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, -->
<!-- OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -->
<!-- LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -->
<!-- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, -->
<!-- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
<!-- ============================================================================ -->
<device xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="1.1" xs:noNamespaceSchemaLocation="CMSIS-SVD_Schema_1_1.xsd">
<vendor>Atmel</vendor>
<name>AT91SAM9M10</name>
<series>SAM9M</series>
<version>20130207</version>
<description>Atmel AT91SAM9M10 device: ARM926EJ Embedded Microprocessor Unit, 400MHz, DDR2/LPDDR, Video Decoder, LCD, HS USB, 10/100 Ethernet, Dual EBI, 324 Pins (refer to http://www.atmel.com/devices/SAM9M10.aspx for more)</description>
<addressUnitBits>8</addressUnitBits>
<width>32</width>
<peripherals>
<peripheral>
<name>LCDC</name>
<version>6385D</version>
<description>LCD Controller</description>
<baseAddress>0x00500000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x100000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>LCDC</name>
<value>23</value>
</interrupt>
<registers>
<register>
<name>DMABADDR1</name>
<description>DMA Base Address Register 1</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BADDR_U</name>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMABADDR2</name>
<description>DMA Base Address Register 2</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BADDR_L</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAFRMPT1</name>
<description>DMA Frame Pointer Register 1</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FRMPT_U</name>
<bitOffset>0</bitOffset>
<bitWidth>23</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMAFRMPT2</name>
<description>DMA Frame Pointer Register 2</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FRMPT_L</name>
<bitOffset>0</bitOffset>
<bitWidth>23</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMAFRMADD1</name>
<description>DMA Frame Address Register 1</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FRMADD_U</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMAFRMADD2</name>
<description>DMA Frame Address Register 2</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FRMADD_L</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMAFRMCFG</name>
<description>DMA Frame Configuration Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FRMSIZE</name>
<description>Frame Size</description>
<bitOffset>0</bitOffset>
<bitWidth>23</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BRSTLN</name>
<description>Burst Length in Words</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMACON</name>
<description>DMA Control Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DMAEN</name>
<description>DMA Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DMARST</name>
<description>DMA Reset (Write-only)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DMABUSY</name>
<description>DMA Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DMAUPDT</name>
<description>DMA Configuration Update</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DMA2DEN</name>
<description>DMA 2D Addressing Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMA2DCFG</name>
<description>DMA Control Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDRINC</name>
<description>DMA 2D Addressing Address increment</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PIXELOFF</name>
<description>DAM2D Addressing Pixel offset</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>LCDCON1</name>
<description>LCD Control Register 1</description>
<addressOffset>0x00000800</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00002000</resetValue>
<fields>
<field>
<name>BYPASS</name>
<description>Bypass LCDDOTCK Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CLKVAL</name>
<description>Clock Divider</description>
<bitOffset>12</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LINECNT</name>
<description>Line Counter (Read-only)</description>
<bitOffset>21</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>LCDCON2</name>
<description>LCD Control Register 2</description>
<addressOffset>0x00000804</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DISTYPE</name>
<description>Display Type</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCANMOD</name>
<description>Scan Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IFWIDTH</name>
<description>Interface width (STN)</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PIXELSIZE</name>
<description>Bits per pixel</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INVVD</name>
<description>LCDD polarity</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INVFRAME</name>
<description>LCDVSYNC polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INVLINE</name>
<description>LCDHSYNC polarity</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INVCLK</name>
<description>LCDDOTCK polarity</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INVDVAL</name>
<description>LCDDEN polarity</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CLKMOD</name>
<description>LCDDOTCK mode</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MEMOR</name>
<description>Memory Ordering Format</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>LCDTIM1</name>
<description>LCD Timing Register 1</description>
<addressOffset>0x00000808</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>VFP</name>
<description>Vertical Front Porch</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VBP</name>
<description>Vertical Back Porch</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VPW</name>
<description>Vertical Synchronization pulse width</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VHDLY</name>
<description>Vertical to horizontal delay</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>STUCKTO1</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>LCDTIM2</name>
<description>LCD Timing Register 2</description>
<addressOffset>0x0000080C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HBP</name>
<description>Horizontal Back Porch</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HPW</name>
<description>Horizontal synchronization pulse width</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HFP</name>
<description>Horizontal Front Porch</description>
<bitOffset>21</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>LCDFRMCFG</name>
<description>LCD Frame Configuration Register</description>
<addressOffset>0x00000810</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LINEVAL</name>
<description>Vertical size of LCD module</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LINESIZE</name>
<description>Horizontal size of LCD module, in pixels, minus 1</description>
<bitOffset>21</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>LCDFIFO</name>
<description>LCD FIFO Register</description>
<addressOffset>0x00000814</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FIFOTH</name>
<description>FIFO Threshold</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DP1_2</name>
<description>Dithering Pattern DP1_2</description>
<addressOffset>0x0000081C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x000000A5</resetValue>
<fields>
<field>
<name>DP1_2</name>
<description>Pattern value for half duty cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DP4_7</name>
<description>Dithering Pattern DP4_7</description>
<addressOffset>0x00000820</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x05AF0FA5</resetValue>
<fields>
<field>
<name>DP4_7</name>
<description>Pattern value for 4/7 duty cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>28</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DP3_5</name>
<description>Dithering Pattern DP3_5</description>
<addressOffset>0x00000824</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x000A5A5F</resetValue>
<fields>
<field>
<name>DP3_5</name>
<description>Pattern value for 3/5 duty cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>20</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DP2_3</name>
<description>Dithering Pattern DP2_3</description>
<addressOffset>0x00000828</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000A5F</resetValue>
<fields>
<field>
<name>DP2_3</name>
<description>Pattern value for 2/3 duty cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DP5_7</name>
<description>Dithering Pattern DP5_7</description>
<addressOffset>0x0000082C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0FAF5FA5</resetValue>
<fields>
<field>
<name>DP5_7</name>
<description>Pattern value for 5/7 duty cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>28</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DP3_4</name>
<description>Dithering Pattern DP3_4</description>
<addressOffset>0x00000830</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0000FAF5</resetValue>
<fields>
<field>
<name>DP3_4</name>
<description>Pattern value for 3/4 duty cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DP4_5</name>
<description>Dithering Pattern DP4_5</description>
<addressOffset>0x00000834</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x000FAF5F</resetValue>
<fields>
<field>
<name>DP4_5</name>
<description>Pattern value for 4/5 duty cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>20</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DP6_7</name>
<description>Dithering Pattern DP6_7</description>
<addressOffset>0x00000838</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0F5FFAFF</resetValue>
<fields>
<field>
<name>DP6_7</name>
<description>Pattern value for 6/7 duty cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>28</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PWRCON</name>
<description>Power Control Register</description>
<addressOffset>0x0000083C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x0000000E</resetValue>
<fields>
<field>
<name>LCD_PWR</name>
<description>LCD module power control</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GUARD_TIME</name>
<bitOffset>1</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LCD_BUSY</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CONTRAST_CTR</name>
<description>Contrast Control Register</description>
<addressOffset>0x00000840</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PS</name>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>POL</name>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ENA</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CONTRAST_VAL</name>
<description>Contrast Value Register</description>
<addressOffset>0x00000844</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>LCD_IER</name>
<description>LCD Interrupt Enable Register</description>
<addressOffset>0x00000848</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LNIE</name>
<description>Line interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LSTLNIE</name>
<description>Last line interrupt enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOFIE</name>
<description>DMA End of frame interrupt enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UFLWIE</name>
<description>FIFO underflow interrupt enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OWRIE</name>
<description>FIFO overwrite interrupt enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MERIE</name>
<description>DMA memory error interrupt enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>LCD_IDR</name>
<description>LCD Interrupt Disable Register</description>
<addressOffset>0x0000084C</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LNID</name>
<description>Line interrupt disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LSTLNID</name>
<description>Last line interrupt disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOFID</name>
<description>DMA End of frame interrupt disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UFLWID</name>
<description>FIFO underflow interrupt disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OWRID</name>
<description>FIFO overwrite interrupt disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MERID</name>
<description>DMA Memory error interrupt disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>LCD_IMR</name>
<description>LCD Interrupt Mask Register</description>
<addressOffset>0x00000850</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LNIM</name>
<description>Line interrupt mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LSTLNIM</name>
<description>Last line interrupt mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOFIM</name>
<description>DMA End of frame interrupt mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UFLWIM</name>
<description>FIFO underflow interrupt mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OWRIM</name>
<description>FIFO overwrite interrupt mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MERIM</name>
<description>DMA Memory error interrupt mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>LCD_ISR</name>
<description>LCD Interrupt Status Register</description>
<addressOffset>0x00000854</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LNIS</name>
<description>Line interrupt status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LSTLNIS</name>
<description>Last line interrupt status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOFIS</name>
<description>DMA End of frame interrupt status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UFLWIS</name>
<description>FIFO underflow interrupt status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OWRIS</name>
<description>FIFO overwrite interrupt status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MERIS</name>
<description>DMA Memory error interrupt status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>LCD_ICR</name>
<description>LCD Interrupt Clear Register</description>
<addressOffset>0x00000858</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LNIC</name>
<description>Line interrupt clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LSTLNIC</name>
<description>Last line interrupt clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOFIC</name>
<description>DMA End of frame interrupt clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UFLWIC</name>
<description>FIFO underflow interrupt clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OWRIC</name>
<description>FIFO overwrite interrupt clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MERIC</name>
<description>DMA Memory error interrupt clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>LCD_ITR</name>
<description>LCD Interrupt Test Register</description>
<addressOffset>0x00000860</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LNIT</name>
<description>Line interrupt test</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LSTLNIT</name>
<description>Last line interrupt test</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOFIT</name>
<description>DMA End of frame interrupt test</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UFLWIT</name>
<description>FIFO underflow interrupt test</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OWRIT</name>
<description>FIFO overwrite interrupt test</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MERIT</name>
<description>DMA Memory error interrupt test</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>LCD_IRR</name>
<description>LCD Interrupt Raw Status Register</description>
<addressOffset>0x00000864</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LNIR</name>
<description>Line interrupt raw status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LSTLNIR</name>
<description>Last line interrupt raw status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOFIR</name>
<description>DMA End of frame interrupt raw status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UFLWIR</name>
<description>FIFO underflow interrupt raw status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OWRIR</name>
<description>FIFO overwrite interrupt raw status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MERIR</name>
<description>DMA Memory error interrupt raw status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>LCD_WPCR</name>
<description>Write Protection Control Register</description>
<addressOffset>0x000008E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>LCD_WPSR</name>
<description>Write Protection Status Register</description>
<addressOffset>0x000008E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>256</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-255</dimIndex>
<name>LUTENTRY[%s]</name>
<description>Palette entry</description>
<addressOffset>0x00000C00</addressOffset>
<size>32</size>
<access>read-write</access>
</register>
</registers>
</peripheral>
<peripheral>
<name>VDEC</name>
<version>6377C</version>
<description>Video Decoder</description>
<prependToName>VDEC_</prependToName>
<baseAddress>0x00900000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x100000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>VDEC</name>
<value>30</value>
</interrupt>
<registers>
<register>
<name>IDR</name>
<description>ID Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x81701000</resetValue>
<fields>
<field>
<name>BUILD_VER</name>
<description>Build Version</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MINOR_VER</name>
<description>Minor Version</description>
<bitOffset>4</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MAJOR_VER</name>
<description>Major Version</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PROD_ID</name>
<description>Product ID</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DIR</name>
<description>Decoder Interrupt Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DE</name>
<description>Decoder Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ID</name>
<description>Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ISET</name>
<description>Decoder Interrupt Set</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DR</name>
<description>Decoder Ready</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BE</name>
<description>Bus Error</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SBE</name>
<description>Stream Buffer Empty</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ASOD</name>
<description>ASO Detected</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ISE</name>
<description>Input Stream Error</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>JPEGSD</name>
<description>JPEG Slice Decoded</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TO</name>
<description>Timeout</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DDCR</name>
<description>Decoder Device Configuration Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000400</resetValue>
<fields>
<field>
<name>MAX_BURST_LEN</name>
<description>Maximum Burst Length for Decoder Bus Transactions</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PRIOR</name>
<description>Decoder Core Internal Bus Service Priority</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DO_LE</name>
<description>Decoder Output Endian Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INTCE_LE</name>
<description>Interface Endian Mode</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DDCGE</name>
<description>Decoder Dynamic Clock Gating Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LAT_COMP</name>
<description>Decoder Latency Compensation</description>
<bitOffset>11</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DOPF</name>
<description>Decoder Output Picture Format</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AHB_BURST</name>
<description>AHB Precise Burst and Data Discard Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DI_LE</name>
<description>Decoder Input Endian Mode</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HTI</name>
<description>Hardware Timeout Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTLR0</name>
<description>Decoder Control Register 0</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HLOCK</name>
<description>HLOCK Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REFFIRST</name>
<description>Reference Field First</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MV</name>
<description>MPEG-2 Motion Vector Write Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>QUANT</name>
<description>Quantization</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FILTDIS</name>
<description>De-block Filtering Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OUTDIS</name>
<description>Disable Decoder Output Picture Writing</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REFFIELD</name>
<description>Indicates Which Field Should Be Used As Reference</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FORWMODE</name>
<description>Coding Mode of Forward Reference Picture</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PICFIELD</name>
<description>Picture Field</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PICTYPE</name>
<description>Picture Type</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PICBEN</name>
<description>B Picture Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PICSTRUCT</name>
<description>Structure of the Current Picture</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PICMODE</name>
<description>Coding mode of Current Picture</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RLCEN</name>
<description>RLC Mode Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DEC_MODE</name>
<description>Decoding Mode</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTLR1</name>
<description>Decoder Control Register 1</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REF_FRAMES</name>
<description>Number of Reference Frames/Semantics</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TOPF</name>
<description>Top Field</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AVSM</name>
<description>Alternative Vertical Scan Method</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HEIGHT_OFF</name>
<description>Height Offset</description>
<bitOffset>7</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PIC_HEIGHT</name>
<description>Picture Height</description>
<bitOffset>11</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WIDTH_OFF</name>
<description>Width Offset</description>
<bitOffset>19</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PIC_WIDTH</name>
<description>Picture Width</description>
<bitOffset>23</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTLR2</name>
<description>Decoder Control Register 2</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FIELDPIC</name>
<description>Flag for Stream</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>QP_FILT_CR_OFF</name>
<bitOffset>14</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>QP_FILT_CB_OFF</name>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>STREAM_START_BIT</name>
<description>Stream Start Bit</description>
<bitOffset>26</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTLR3</name>
<description>Decoder Control Register 3</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>STREAM_LEN</name>
<description>Stream Length</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INIT_QP</name>
<description>Quantization Initialization</description>
<bitOffset>25</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ST_COD_EN</name>
<description>Stream Start Code</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTLR4</name>
<description>Decoder Control Register 4</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FRAME_NUM</name>
<description>Frame Number</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FRAME_NUM_LEN</name>
<description>Frame Number length</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>W_BIPR</name>
<description>Weight Prediction for B Slices</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>W_PRED</name>
<description>Weight Prediction</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIRMV_PRED</name>
<description>Derive Luma Method</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BW</name>
<description>Black and White Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CABAC</name>
<description>H.264 CABAC Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTLR5</name>
<description>Decoder Control Register 5</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IDR_PIC_ID</name>
<description>IDR Picture</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IDREN</name>
<description>IDR Picture Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REF_PIC_LEN</name>
<description>Reference Picture Length</description>
<bitOffset>17</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EIGHT58</name>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RD_PIC</name>
<description>Redundant Picture Present</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FILT_CTRL</name>
<description>Extra Variables Controlling Characteristics of The Deblocking Filter</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CONS_INTRA</name>
<description>Intra in Prediction</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTLR6</name>
<description>Decoder Control Register 6</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>POC_LEN</name>
<description>Picture Order length</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REF_IDX0</name>
<description>Maximum Reference Index 0</description>
<bitOffset>14</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REF_IDX1</name>
<description>Maximum Reference Index 1</description>
<bitOffset>19</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PPS_ID</name>
<description>Picture Parameter</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMVBA</name>
<description>Base Address for Differential Motion Vector</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MV_CONTROL_BASE</name>
<description>Differential Motion Vector Base Address</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTLR7</name>
<description>Decoder Control Register 7</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BA</name>
<description>Base Address</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RLCVLCBA</name>
<description>RLC/VLC Data Base Address</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BA</name>
<description>Base Address</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PICTBA</name>
<description>Decoded Picture Base Address</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BA</name>
<description>Base Address</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<dim>16</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-15</dimIndex>
<name>PIDXBA[%s]</name>
<description>Reference Picture Index 0 Base Address</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>BA</name>
<description>Base Address</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PNR0</name>
<description>Reference Picture Numbers Register 0</description>
<addressOffset>0x00000078</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REFER0</name>
<description>Reference Picture Number for Index 0</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REFER1</name>
<description>Reference Picture Number for Index 1</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PNR1</name>
<description>Reference Picture Numbers Register 1</description>
<addressOffset>0x0000007C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REFER2</name>
<description>Reference Picture Number for Index 2</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REFER3</name>
<description>Reference Picture Number for Index 3</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PNR2</name>
<description>Reference Picture Numbers Register 2</description>
<addressOffset>0x00000080</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>PNR3</name>
<description>Reference Picture Numbers Register 3</description>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REFER4</name>
<description>Reference Picture Number for Index 4</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REFER5</name>
<description>Reference Picture Number for Index 5</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PNR4</name>
<description>Reference Picture Numbers Register 4</description>
<addressOffset>0x00000088</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REFER8</name>
<description>Reference Picture Number for Index 8</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REFER9</name>
<description>Reference Picture Number for Index 9</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PNR5</name>
<description>Reference Picture Numbers Register 5</description>
<addressOffset>0x0000008C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REFER10</name>
<description>Reference Picture Number for Index 10</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REFER11</name>
<description>Reference Picture Number for Index 11</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PNR6</name>
<description>Reference Picture Numbers Register 6</description>
<addressOffset>0x00000090</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REFER12</name>
<description>Reference Picture Number for Index 12</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REFER13</name>
<description>Reference Picture Number for Index 13</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PNR7</name>
<description>Reference Picture Numbers Register 7</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>REFER14</name>
<description>Reference Picture Number for Index 14</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REFER15</name>
<description>Reference Picture Number for Index 15</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PLTFR</name>
<description>Reference Picture Long Term Flag Register</description>
<addressOffset>0x00000098</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LTF</name>
<description>Long Term Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PVFR</name>
<description>Reference Picture Valid Flag Register</description>
<addressOffset>0x0000009C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>SDTBA</name>
<description>Standard Dependent Tables Base Address</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BA</name>
<description>Base Address</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMMVBA</name>
<description>Direct Mode Motion Vector Base Address</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BA</name>
<description>Base Address</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IRPLR0</name>
<description>H264 Initial Reference Picture List Register 0</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IREFL_FW0</name>
<description>Initial Reference Picture List for Forward Picid 0</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW0</name>
<description>Initial Reference Picture List for Backward Picid 0</description>
<bitOffset>5</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_FW1</name>
<description>Initial Reference Picture List for Forward Picid 1</description>
<bitOffset>10</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW1</name>
<description>Initial Reference Picture List for Backward Picid 1</description>
<bitOffset>15</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_FW2</name>
<description>Initial Reference Picture List for Forward Picid 2</description>
<bitOffset>20</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW2</name>
<description>Initial Reference Picture List for Backward Picid 2</description>
<bitOffset>25</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IRPLR1</name>
<description>H264 Initial Reference Picture List Register 1</description>
<addressOffset>0x000000AC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IREFL_FW3</name>
<description>Initial Reference Picture List for Forward Picid 3</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW3</name>
<description>Initial Reference Picture List for Backward Picid 3</description>
<bitOffset>5</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_FW4</name>
<description>Initial Reference Picture List for Forward Picid 4</description>
<bitOffset>10</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW4</name>
<description>Initial Reference Picture List for Backward Picid 4</description>
<bitOffset>15</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_FW5</name>
<description>Initial Reference Picture List for Forward Picid 5</description>
<bitOffset>20</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW5</name>
<description>Initial Reference Picture List for Backward Picid 5</description>
<bitOffset>25</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IRPLR2</name>
<description>H264 Initial Reference Picture List Register 2</description>
<addressOffset>0x000000B0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IREFL_FW6</name>
<description>Initial Reference Picture List for Forward Picid 6</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW6</name>
<description>Initial Reference Picture List for Backward Picid 6</description>
<bitOffset>5</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_FW7</name>
<description>Initial Reference Picture List for Forward Picid 7</description>
<bitOffset>10</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW7</name>
<description>Initial Reference Picture List for Backward Picid 7</description>
<bitOffset>15</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_FW8</name>
<description>Initial Reference Picture List for Forward Picid 8</description>
<bitOffset>20</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW8</name>
<description>Initial Reference Picture List for Backward Picid 8</description>
<bitOffset>25</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IRPLR3</name>
<description>H264 Initial Reference Picture List Register 3</description>
<addressOffset>0x000000B4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IREFL_FW9</name>
<description>Initial Reference Picture List for Forward Picid 9</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW9</name>
<description>Initial Reference Picture List for Backward Picid 9</description>
<bitOffset>5</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_FW10</name>
<description>Initial Reference Picture List for Forward Picid 10</description>
<bitOffset>10</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW10</name>
<description>Initial Reference Picture List for Backward Picid 10</description>
<bitOffset>15</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_FW11</name>
<description>Initial Reference Picture List for Forward Picid 11</description>
<bitOffset>20</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW11</name>
<description>Initial Reference Picture List for Backward Picid 11</description>
<bitOffset>25</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IRPLR4</name>
<description>H264 Initial Reference Picture List Register 4</description>
<addressOffset>0x000000B8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IREFL_FW12</name>
<description>Initial Reference Picture List for Forward Picid 12</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW12</name>
<description>Initial Reference Picture List for Backward Picid 12</description>
<bitOffset>5</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_FW13</name>
<description>Initial Reference Picture List for Forward Picid 13</description>
<bitOffset>10</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW13</name>
<description>Initial Reference Picture List for Backward Picid 13</description>
<bitOffset>15</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_FW14</name>
<description>Initial Reference Picture List for Forward Picid 14</description>
<bitOffset>20</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW14</name>
<description>Initial Reference Picture List for Backward Picid 14</description>
<bitOffset>25</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IRPLR5</name>
<description>H264 Initial Reference Picture List Register 5</description>
<addressOffset>0x000000BC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IREFL_FW15</name>
<description>Initial Reference Picture List for Forward Picid 15</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IREFL_BW15</name>
<description>Initial Reference Picture List for Backward Picid 15</description>
<bitOffset>5</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ECR</name>
<description>Error Concealment Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>STARTMB_Y</name>
<description>Start MB from SW for Y Dimension</description>
<bitOffset>15</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>STARTMB_X</name>
<description>Start MB from SW for X Dimension</description>
<bitOffset>23</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>UDPHS</name>
<version>6227O</version>
<description>USB High Speed Device Port</description>
<prependToName>UDPHS_</prependToName>
<baseAddress>0xFFF78000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>UDPHS</name>
<value>27</value>
</interrupt>
<registers>
<register>
<name>CTRL</name>
<description>UDPHS Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000200</resetValue>
<fields>
<field>
<name>DEV_ADDR</name>
<description>UDPHS Address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FADDR_EN</name>
<description>Function Address Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EN_UDPHS</name>
<description>UDPHS Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DETACH</name>
<description>Detach Command</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REWAKEUP</name>
<description>Send Remote Wake Up</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PULLD_DIS</name>
<description>Pull-Down Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FNUM</name>
<description>UDPHS Frame Number Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MICRO_FRAME_NUM</name>
<description>Microframe Number</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME_NUMBER</name>
<description>Frame Number as defined in the Packet Field Formats</description>
<bitOffset>3</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FNUM_ERR</name>
<description>Frame Number CRC Error</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IEN</name>
<description>UDPHS Interrupt Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000010</resetValue>
<fields>
<field>
<name>DET_SUSPD</name>
<description>Suspend Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MICRO_SOF</name>
<description>Micro-SOF Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INT_SOF</name>
<description>SOF Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ENDRESET</name>
<description>End Of Reset Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAKE_UP</name>
<description>Wake Up CPU Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ENDOFRSM</name>
<description>End Of Resume Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UPSTR_RES</name>
<description>Upstream Resume Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_0</name>
<description>Endpoint 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_1</name>
<description>Endpoint 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_2</name>
<description>Endpoint 2 Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_3</name>
<description>Endpoint 3 Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_4</name>
<description>Endpoint 4 Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_5</name>
<description>Endpoint 5 Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_6</name>
<description>Endpoint 6 Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DMA_1</name>
<description>DMA Channel 1 Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DMA_2</name>
<description>DMA Channel 2 Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DMA_3</name>
<description>DMA Channel 3 Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DMA_4</name>
<description>DMA Channel 4 Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DMA_5</name>
<description>DMA Channel 5 Interrupt Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DMA_6</name>
<description>DMA Channel 6 Interrupt Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>INTSTA</name>
<description>UDPHS Interrupt Status Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SPEED</name>
<description>Speed Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DET_SUSPD</name>
<description>Suspend Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MICRO_SOF</name>
<description>Micro Start Of Frame Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INT_SOF</name>
<description>Start Of Frame Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRESET</name>
<description>End Of Reset Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WAKE_UP</name>
<description>Wake Up CPU Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDOFRSM</name>
<description>End Of Resume Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UPSTR_RES</name>
<description>Upstream Resume Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPT_0</name>
<description>Endpoint 0 Interrupt</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPT_1</name>
<description>Endpoint 1 Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPT_2</name>
<description>Endpoint 2 Interrupt</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPT_3</name>
<description>Endpoint 3 Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPT_4</name>
<description>Endpoint 4 Interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPT_5</name>
<description>Endpoint 5 Interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPT_6</name>
<description>Endpoint 6 Interrupt</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMA_1</name>
<description>DMA Channel 1 Interrupt</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMA_2</name>
<description>DMA Channel 2 Interrupt</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMA_3</name>
<description>DMA Channel 3 Interrupt</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMA_4</name>
<description>DMA Channel 4 Interrupt</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMA_5</name>
<description>DMA Channel 5 Interrupt</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMA_6</name>
<description>DMA Channel 6 Interrupt</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CLRINT</name>
<description>UDPHS Clear Interrupt Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>DET_SUSPD</name>
<description>Suspend Interrupt Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MICRO_SOF</name>
<description>Micro Start Of Frame Interrupt Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INT_SOF</name>
<description>Start Of Frame Interrupt Clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRESET</name>
<description>End Of Reset Interrupt Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>WAKE_UP</name>
<description>Wake Up CPU Interrupt Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDOFRSM</name>
<description>End Of Resume Interrupt Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UPSTR_RES</name>
<description>Upstream Resume Interrupt Clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTRST</name>
<description>UDPHS Endpoints Reset Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_0</name>
<description>Endpoint 0 Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPT_1</name>
<description>Endpoint 1 Reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPT_2</name>
<description>Endpoint 2 Reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPT_3</name>
<description>Endpoint 3 Reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPT_4</name>
<description>Endpoint 4 Reset</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPT_5</name>
<description>Endpoint 5 Reset</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EPT_6</name>
<description>Endpoint 6 Reset</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>TST</name>
<description>UDPHS Test Register</description>
<addressOffset>0x000000E0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SPEED_CFG</name>
<description>Speed Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal Mode: The macro is in Full Speed mode, ready to make a High Speed identification, if the host supports it and then to automatically switch to High Speed mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH_SPEED</name>
<description>Force High Speed: Set this value to force the hardware to work in High Speed mode. Only for debug or test purpose.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>FULL_SPEED</name>
<description>Force Full Speed: Set this value to force the hardware to work only in Full Speed mode. In this configuration, the macro will not respond to a High Speed reset handshake.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TST_J</name>
<description>Test J Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TST_K</name>
<description>Test K Mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TST_PKT</name>
<description>Test Packet Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OPMODE2</name>
<description>OpMode2</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>EPTCFG0</name>
<description>UDPHS Endpoint Configuration Register (endpoint = 0)</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_SIZE</name>
<description>Endpoint Size</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8</name>
<description>8 bytes</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 bytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>32</name>
<description>32 bytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64 bytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>128 bytes</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>256 bytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>512</name>
<description>512 bytes</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>1024 bytes</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EPT_DIR</name>
<description>Endpoint Direction</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_TYPE</name>
<description>Endpoint Type</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CTRL8</name>
<description>Control endpoint</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ISO</name>
<description>Isochronous endpoint</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BULK</name>
<description>Bulk endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>INT</name>
<description>Interrupt endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BK_NUMBER</name>
<description>Number of Banks</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>0</name>
<description>Zero bank, the endpoint is not mapped in memory</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>One bank (bank 0)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2</name>
<description>Double bank (Ping-Pong: bank0/bank1)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>3</name>
<description>Triple bank (bank0/bank1/bank2)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NB_TRANS</name>
<description>Number Of Transaction per Microframe</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_MAPD</name>
<description>Endpoint Mapped</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB0</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 0)</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB0_ISOENDPT</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 0)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS0</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 0)</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Enable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS0_ISOENDPT</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 0)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>bank flush error Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL0</name>
<description>UDPHS Endpoint Control Register (endpoint = 0)</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled (Not for CONTROL Endpoints)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enabled</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL0_ISOENDPT</name>
<description>UDPHS Endpoint Control Register (endpoint = 0)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA0</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 0)</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Set</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA0_ISOENDPT</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 0)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA0</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 0)</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Clear</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA0_ISOENDPT</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 0)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>Number of Transaction Error Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA0</name>
<description>UDPHS Endpoint Status Register (endpoint = 0)</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAK IN</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAK OUT</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK_CTLDIR</name>
<description>Current Bank/Control Direction</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA0_ISOENDPT</name>
<description>UDPHS Endpoint Status Register (endpoint = 0)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Data2 (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>MData (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>CRC ISO Error/Number of Transaction Error</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK</name>
<description>Current Bank</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>BANK0</name>
<description>Bank 0 (or single bank)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK1</name>
<description>Bank 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK2</name>
<description>Bank 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCFG1</name>
<description>UDPHS Endpoint Configuration Register (endpoint = 1)</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_SIZE</name>
<description>Endpoint Size</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8</name>
<description>8 bytes</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 bytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>32</name>
<description>32 bytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64 bytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>128 bytes</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>256 bytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>512</name>
<description>512 bytes</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>1024 bytes</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EPT_DIR</name>
<description>Endpoint Direction</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_TYPE</name>
<description>Endpoint Type</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CTRL8</name>
<description>Control endpoint</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ISO</name>
<description>Isochronous endpoint</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BULK</name>
<description>Bulk endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>INT</name>
<description>Interrupt endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BK_NUMBER</name>
<description>Number of Banks</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>0</name>
<description>Zero bank, the endpoint is not mapped in memory</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>One bank (bank 0)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2</name>
<description>Double bank (Ping-Pong: bank0/bank1)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>3</name>
<description>Triple bank (bank0/bank1/bank2)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NB_TRANS</name>
<description>Number Of Transaction per Microframe</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_MAPD</name>
<description>Endpoint Mapped</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB1</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 1)</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB1_ISOENDPT</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 1)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS1</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 1)</description>
<addressOffset>0x00000128</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Enable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS1_ISOENDPT</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 1)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000128</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>bank flush error Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL1</name>
<description>UDPHS Endpoint Control Register (endpoint = 1)</description>
<addressOffset>0x0000012C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled (Not for CONTROL Endpoints)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enabled</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL1_ISOENDPT</name>
<description>UDPHS Endpoint Control Register (endpoint = 1)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x0000012C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA1</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 1)</description>
<addressOffset>0x00000134</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Set</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA1_ISOENDPT</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 1)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000134</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA1</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 1)</description>
<addressOffset>0x00000138</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Clear</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA1_ISOENDPT</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 1)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000138</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>Number of Transaction Error Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA1</name>
<description>UDPHS Endpoint Status Register (endpoint = 1)</description>
<addressOffset>0x0000013C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAK IN</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAK OUT</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK_CTLDIR</name>
<description>Current Bank/Control Direction</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA1_ISOENDPT</name>
<description>UDPHS Endpoint Status Register (endpoint = 1)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x0000013C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Data2 (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>MData (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>CRC ISO Error/Number of Transaction Error</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK</name>
<description>Current Bank</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>BANK0</name>
<description>Bank 0 (or single bank)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK1</name>
<description>Bank 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK2</name>
<description>Bank 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCFG2</name>
<description>UDPHS Endpoint Configuration Register (endpoint = 2)</description>
<addressOffset>0x00000140</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_SIZE</name>
<description>Endpoint Size</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8</name>
<description>8 bytes</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 bytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>32</name>
<description>32 bytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64 bytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>128 bytes</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>256 bytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>512</name>
<description>512 bytes</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>1024 bytes</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EPT_DIR</name>
<description>Endpoint Direction</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_TYPE</name>
<description>Endpoint Type</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CTRL8</name>
<description>Control endpoint</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ISO</name>
<description>Isochronous endpoint</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BULK</name>
<description>Bulk endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>INT</name>
<description>Interrupt endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BK_NUMBER</name>
<description>Number of Banks</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>0</name>
<description>Zero bank, the endpoint is not mapped in memory</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>One bank (bank 0)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2</name>
<description>Double bank (Ping-Pong: bank0/bank1)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>3</name>
<description>Triple bank (bank0/bank1/bank2)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NB_TRANS</name>
<description>Number Of Transaction per Microframe</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_MAPD</name>
<description>Endpoint Mapped</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB2</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 2)</description>
<addressOffset>0x00000144</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB2_ISOENDPT</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 2)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000144</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS2</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 2)</description>
<addressOffset>0x00000148</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Enable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS2_ISOENDPT</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 2)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000148</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>bank flush error Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL2</name>
<description>UDPHS Endpoint Control Register (endpoint = 2)</description>
<addressOffset>0x0000014C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled (Not for CONTROL Endpoints)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enabled</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL2_ISOENDPT</name>
<description>UDPHS Endpoint Control Register (endpoint = 2)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x0000014C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA2</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 2)</description>
<addressOffset>0x00000154</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Set</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA2_ISOENDPT</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 2)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000154</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA2</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 2)</description>
<addressOffset>0x00000158</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Clear</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA2_ISOENDPT</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 2)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000158</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>Number of Transaction Error Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA2</name>
<description>UDPHS Endpoint Status Register (endpoint = 2)</description>
<addressOffset>0x0000015C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAK IN</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAK OUT</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK_CTLDIR</name>
<description>Current Bank/Control Direction</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA2_ISOENDPT</name>
<description>UDPHS Endpoint Status Register (endpoint = 2)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x0000015C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Data2 (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>MData (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>CRC ISO Error/Number of Transaction Error</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK</name>
<description>Current Bank</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>BANK0</name>
<description>Bank 0 (or single bank)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK1</name>
<description>Bank 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK2</name>
<description>Bank 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCFG3</name>
<description>UDPHS Endpoint Configuration Register (endpoint = 3)</description>
<addressOffset>0x00000160</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_SIZE</name>
<description>Endpoint Size</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8</name>
<description>8 bytes</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 bytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>32</name>
<description>32 bytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64 bytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>128 bytes</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>256 bytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>512</name>
<description>512 bytes</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>1024 bytes</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EPT_DIR</name>
<description>Endpoint Direction</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_TYPE</name>
<description>Endpoint Type</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CTRL8</name>
<description>Control endpoint</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ISO</name>
<description>Isochronous endpoint</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BULK</name>
<description>Bulk endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>INT</name>
<description>Interrupt endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BK_NUMBER</name>
<description>Number of Banks</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>0</name>
<description>Zero bank, the endpoint is not mapped in memory</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>One bank (bank 0)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2</name>
<description>Double bank (Ping-Pong: bank0/bank1)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>3</name>
<description>Triple bank (bank0/bank1/bank2)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NB_TRANS</name>
<description>Number Of Transaction per Microframe</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_MAPD</name>
<description>Endpoint Mapped</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB3</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 3)</description>
<addressOffset>0x00000164</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB3_ISOENDPT</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 3)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000164</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS3</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 3)</description>
<addressOffset>0x00000168</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Enable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS3_ISOENDPT</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 3)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000168</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>bank flush error Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL3</name>
<description>UDPHS Endpoint Control Register (endpoint = 3)</description>
<addressOffset>0x0000016C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled (Not for CONTROL Endpoints)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enabled</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL3_ISOENDPT</name>
<description>UDPHS Endpoint Control Register (endpoint = 3)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x0000016C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA3</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 3)</description>
<addressOffset>0x00000174</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Set</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA3_ISOENDPT</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 3)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000174</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA3</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 3)</description>
<addressOffset>0x00000178</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Clear</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA3_ISOENDPT</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 3)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000178</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>Number of Transaction Error Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA3</name>
<description>UDPHS Endpoint Status Register (endpoint = 3)</description>
<addressOffset>0x0000017C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAK IN</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAK OUT</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK_CTLDIR</name>
<description>Current Bank/Control Direction</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA3_ISOENDPT</name>
<description>UDPHS Endpoint Status Register (endpoint = 3)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x0000017C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Data2 (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>MData (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>CRC ISO Error/Number of Transaction Error</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK</name>
<description>Current Bank</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>BANK0</name>
<description>Bank 0 (or single bank)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK1</name>
<description>Bank 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK2</name>
<description>Bank 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCFG4</name>
<description>UDPHS Endpoint Configuration Register (endpoint = 4)</description>
<addressOffset>0x00000180</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_SIZE</name>
<description>Endpoint Size</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8</name>
<description>8 bytes</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 bytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>32</name>
<description>32 bytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64 bytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>128 bytes</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>256 bytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>512</name>
<description>512 bytes</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>1024 bytes</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EPT_DIR</name>
<description>Endpoint Direction</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_TYPE</name>
<description>Endpoint Type</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CTRL8</name>
<description>Control endpoint</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ISO</name>
<description>Isochronous endpoint</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BULK</name>
<description>Bulk endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>INT</name>
<description>Interrupt endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BK_NUMBER</name>
<description>Number of Banks</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>0</name>
<description>Zero bank, the endpoint is not mapped in memory</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>One bank (bank 0)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2</name>
<description>Double bank (Ping-Pong: bank0/bank1)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>3</name>
<description>Triple bank (bank0/bank1/bank2)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NB_TRANS</name>
<description>Number Of Transaction per Microframe</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_MAPD</name>
<description>Endpoint Mapped</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB4</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 4)</description>
<addressOffset>0x00000184</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB4_ISOENDPT</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 4)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000184</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS4</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 4)</description>
<addressOffset>0x00000188</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Enable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS4_ISOENDPT</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 4)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000188</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>bank flush error Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL4</name>
<description>UDPHS Endpoint Control Register (endpoint = 4)</description>
<addressOffset>0x0000018C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled (Not for CONTROL Endpoints)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enabled</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL4_ISOENDPT</name>
<description>UDPHS Endpoint Control Register (endpoint = 4)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x0000018C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA4</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 4)</description>
<addressOffset>0x00000194</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Set</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA4_ISOENDPT</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 4)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000194</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA4</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 4)</description>
<addressOffset>0x00000198</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Clear</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA4_ISOENDPT</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 4)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x00000198</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>Number of Transaction Error Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA4</name>
<description>UDPHS Endpoint Status Register (endpoint = 4)</description>
<addressOffset>0x0000019C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAK IN</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAK OUT</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK_CTLDIR</name>
<description>Current Bank/Control Direction</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA4_ISOENDPT</name>
<description>UDPHS Endpoint Status Register (endpoint = 4)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x0000019C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Data2 (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>MData (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>CRC ISO Error/Number of Transaction Error</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK</name>
<description>Current Bank</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>BANK0</name>
<description>Bank 0 (or single bank)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK1</name>
<description>Bank 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK2</name>
<description>Bank 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCFG5</name>
<description>UDPHS Endpoint Configuration Register (endpoint = 5)</description>
<addressOffset>0x000001A0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_SIZE</name>
<description>Endpoint Size</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8</name>
<description>8 bytes</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 bytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>32</name>
<description>32 bytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64 bytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>128 bytes</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>256 bytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>512</name>
<description>512 bytes</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>1024 bytes</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EPT_DIR</name>
<description>Endpoint Direction</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_TYPE</name>
<description>Endpoint Type</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CTRL8</name>
<description>Control endpoint</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ISO</name>
<description>Isochronous endpoint</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BULK</name>
<description>Bulk endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>INT</name>
<description>Interrupt endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BK_NUMBER</name>
<description>Number of Banks</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>0</name>
<description>Zero bank, the endpoint is not mapped in memory</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>One bank (bank 0)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2</name>
<description>Double bank (Ping-Pong: bank0/bank1)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>3</name>
<description>Triple bank (bank0/bank1/bank2)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NB_TRANS</name>
<description>Number Of Transaction per Microframe</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_MAPD</name>
<description>Endpoint Mapped</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB5</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 5)</description>
<addressOffset>0x000001A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB5_ISOENDPT</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 5)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x000001A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS5</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 5)</description>
<addressOffset>0x000001A8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Enable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS5_ISOENDPT</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 5)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x000001A8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>bank flush error Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL5</name>
<description>UDPHS Endpoint Control Register (endpoint = 5)</description>
<addressOffset>0x000001AC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled (Not for CONTROL Endpoints)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enabled</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL5_ISOENDPT</name>
<description>UDPHS Endpoint Control Register (endpoint = 5)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x000001AC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA5</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 5)</description>
<addressOffset>0x000001B4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Set</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA5_ISOENDPT</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 5)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x000001B4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA5</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 5)</description>
<addressOffset>0x000001B8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Clear</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA5_ISOENDPT</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 5)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x000001B8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>Number of Transaction Error Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA5</name>
<description>UDPHS Endpoint Status Register (endpoint = 5)</description>
<addressOffset>0x000001BC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAK IN</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAK OUT</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK_CTLDIR</name>
<description>Current Bank/Control Direction</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA5_ISOENDPT</name>
<description>UDPHS Endpoint Status Register (endpoint = 5)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x000001BC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Data2 (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>MData (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>CRC ISO Error/Number of Transaction Error</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK</name>
<description>Current Bank</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>BANK0</name>
<description>Bank 0 (or single bank)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK1</name>
<description>Bank 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK2</name>
<description>Bank 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCFG6</name>
<description>UDPHS Endpoint Configuration Register (endpoint = 6)</description>
<addressOffset>0x000001C0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_SIZE</name>
<description>Endpoint Size</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8</name>
<description>8 bytes</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 bytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>32</name>
<description>32 bytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64 bytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>128 bytes</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>256 bytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>512</name>
<description>512 bytes</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>1024 bytes</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EPT_DIR</name>
<description>Endpoint Direction</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_TYPE</name>
<description>Endpoint Type</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CTRL8</name>
<description>Control endpoint</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ISO</name>
<description>Isochronous endpoint</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BULK</name>
<description>Bulk endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>INT</name>
<description>Interrupt endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BK_NUMBER</name>
<description>Number of Banks</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>0</name>
<description>Zero bank, the endpoint is not mapped in memory</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>One bank (bank 0)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2</name>
<description>Double bank (Ping-Pong: bank0/bank1)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>3</name>
<description>Triple bank (bank0/bank1/bank2)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NB_TRANS</name>
<description>Number Of Transaction per Microframe</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EPT_MAPD</name>
<description>Endpoint Mapped</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB6</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 6)</description>
<addressOffset>0x000001C4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLENB6_ISOENDPT</name>
<description>UDPHS Endpoint Control Enable Register (endpoint = 6)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x000001C4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Send/Short Packet Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS6</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 6)</description>
<addressOffset>0x000001C8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Enable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTLDIS6_ISOENDPT</name>
<description>UDPHS Endpoint Control Disable Register (endpoint = 6)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x000001C8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EPT_DISABL</name>
<description>Endpoint Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupts Disable DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>bank flush error Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL6</name>
<description>UDPHS Endpoint Control Register (endpoint = 6)</description>
<addressOffset>0x000001CC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled (Not for CONTROL Endpoints)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NYET_DIS</name>
<description>NYET Disable (Only for High Speed Bulk OUT endpoints)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Interrupt Enabled</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCTL6_ISOENDPT</name>
<description>UDPHS Endpoint Control Register (endpoint = 6)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x000001CC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EPT_ENABL</name>
<description>Endpoint Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AUTO_VALID</name>
<description>Packet Auto-Valid Enabled</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INTDIS_DMA</name>
<description>Interrupt Disables DMA</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DATAX_RX</name>
<description>DATAx Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MDATA_RX</name>
<description>MDATA Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints)</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error Interrupt Enabled</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Interrupt Enabled</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Interrupt Enabled</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error Interrupt Enabled</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Interrupt Enabled</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>ISO CRC Error/Number of Transaction Error Interrupt Enabled</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Interrupt Enabled</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK</name>
<description>Busy Bank Interrupt Enabled</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet Interrupt Enabled</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA6</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 6)</description>
<addressOffset>0x000001D4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Set</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSETSTA6_ISOENDPT</name>
<description>UDPHS Endpoint Set Status Register (endpoint = 6)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x000001D4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY_TXKL</name>
<description>KILL Bank Set (for IN Endpoint)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA6</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 6)</description>
<addressOffset>0x000001D8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAKIN Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAKOUT Clear</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTCLRSTA6_ISOENDPT</name>
<description>UDPHS Endpoint Clear Status Register (endpoint = 6)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x000001D8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TOGGLESQ</name>
<description>Data Toggle Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>Number of Transaction Error Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA6</name>
<description>UDPHS Endpoint Status Register (endpoint = 6)</description>
<addressOffset>0x000001DC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>FRCESTALL</name>
<description>Stall Handshake Request</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>Reserved for High Bandwidth Isochronous Endpoint</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TX Packet Ready</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RX_SETUP</name>
<description>Received SETUP</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALL_SNT</name>
<description>Stall Sent</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_IN</name>
<description>NAK IN</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NAK_OUT</name>
<description>NAK OUT</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK_CTLDIR</name>
<description>Current Bank/Control Direction</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EPTSTA6_ISOENDPT</name>
<description>UDPHS Endpoint Status Register (endpoint = 6)</description>
<alternateGroup>ISOENDPT</alternateGroup>
<addressOffset>0x000001DC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000040</resetValue>
<fields>
<field>
<name>TOGGLESQ_STA</name>
<description>Toggle Sequencing</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>DATA0</name>
<description>DATA0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA1</name>
<description>DATA1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA2</name>
<description>Data2 (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MDATA</name>
<description>MData (only for High Bandwidth Isochronous Endpoint)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERR_OVFLW</name>
<description>Overflow Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY_TXKL</name>
<description>Received OUT Data/KILL Bank</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TX_COMPLT</name>
<description>Transmitted IN Data Complete</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY_TRER</name>
<description>TX Packet Ready/Transaction Error</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FL_ISO</name>
<description>Error Flow</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_CRC_NTR</name>
<description>CRC ISO Error/Number of Transaction Error</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR_FLUSH</name>
<description>Bank Flush Error</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK</name>
<description>Current Bank</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>BANK0</name>
<description>Bank 0 (or single bank)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK1</name>
<description>Bank 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BANK2</name>
<description>Bank 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BUSY_BANK_STA</name>
<description>Busy Bank Number</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>1BUSYBANK</name>
<description>1 busy bank</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BUSYBANKS</name>
<description>2 busy banks</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BUSYBANKS</name>
<description>3 busy banks</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BYTE_COUNT</name>
<description>UDPHS Byte Count</description>
<bitOffset>20</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SHRT_PCKT</name>
<description>Short Packet</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMANXTDSC0</name>
<description>UDPHS DMA Next Descriptor Address Register (channel = 0)</description>
<addressOffset>0x00000300</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NXT_DSC_ADD</name>
<description>Next Descriptor Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAADDRESS0</name>
<description>UDPHS DMA Channel Address Register (channel = 0)</description>
<addressOffset>0x00000304</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BUFF_ADD</name>
<description>Buffer Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMACONTROL0</name>
<description>UDPHS DMA Channel Control Register (channel = 0)</description>
<addressOffset>0x00000308</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANN_ENB</name>
<description>(Channel Enable Command)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDNXT_DSC</name>
<description>Load Next Channel Transfer Descriptor Enable (Command)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_EN</name>
<description>End of Transfer Enable (Control)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_B_EN</name>
<description>End of Buffer Enable (Control)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_IT</name>
<description>End of Transfer Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_BUFFIT</name>
<description>End of Buffer Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DESC_LD_IT</name>
<description>Descriptor Loaded Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST_LCK</name>
<description>Burst Lock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BUFF_LENGTH</name>
<description>Buffer Byte Length (Write-only)</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMASTATUS0</name>
<description>UDPHS DMA Channel Status Register (channel = 0)</description>
<addressOffset>0x0000030C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANN_ENB</name>
<description>Channel Enable Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHANN_ACT</name>
<description>Channel Active Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_ST</name>
<description>End of Channel Transfer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_BF_ST</name>
<description>End of Channel Buffer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DESC_LDST</name>
<description>Descriptor Loaded Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BUFF_COUNT</name>
<description>Buffer Byte Count</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMANXTDSC1</name>
<description>UDPHS DMA Next Descriptor Address Register (channel = 1)</description>
<addressOffset>0x00000310</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NXT_DSC_ADD</name>
<description>Next Descriptor Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAADDRESS1</name>
<description>UDPHS DMA Channel Address Register (channel = 1)</description>
<addressOffset>0x00000314</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BUFF_ADD</name>
<description>Buffer Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMACONTROL1</name>
<description>UDPHS DMA Channel Control Register (channel = 1)</description>
<addressOffset>0x00000318</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANN_ENB</name>
<description>(Channel Enable Command)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDNXT_DSC</name>
<description>Load Next Channel Transfer Descriptor Enable (Command)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_EN</name>
<description>End of Transfer Enable (Control)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_B_EN</name>
<description>End of Buffer Enable (Control)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_IT</name>
<description>End of Transfer Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_BUFFIT</name>
<description>End of Buffer Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DESC_LD_IT</name>
<description>Descriptor Loaded Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST_LCK</name>
<description>Burst Lock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BUFF_LENGTH</name>
<description>Buffer Byte Length (Write-only)</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMASTATUS1</name>
<description>UDPHS DMA Channel Status Register (channel = 1)</description>
<addressOffset>0x0000031C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANN_ENB</name>
<description>Channel Enable Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHANN_ACT</name>
<description>Channel Active Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_ST</name>
<description>End of Channel Transfer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_BF_ST</name>
<description>End of Channel Buffer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DESC_LDST</name>
<description>Descriptor Loaded Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BUFF_COUNT</name>
<description>Buffer Byte Count</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMANXTDSC2</name>
<description>UDPHS DMA Next Descriptor Address Register (channel = 2)</description>
<addressOffset>0x00000320</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NXT_DSC_ADD</name>
<description>Next Descriptor Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAADDRESS2</name>
<description>UDPHS DMA Channel Address Register (channel = 2)</description>
<addressOffset>0x00000324</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BUFF_ADD</name>
<description>Buffer Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMACONTROL2</name>
<description>UDPHS DMA Channel Control Register (channel = 2)</description>
<addressOffset>0x00000328</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANN_ENB</name>
<description>(Channel Enable Command)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDNXT_DSC</name>
<description>Load Next Channel Transfer Descriptor Enable (Command)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_EN</name>
<description>End of Transfer Enable (Control)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_B_EN</name>
<description>End of Buffer Enable (Control)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_IT</name>
<description>End of Transfer Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_BUFFIT</name>
<description>End of Buffer Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DESC_LD_IT</name>
<description>Descriptor Loaded Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST_LCK</name>
<description>Burst Lock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BUFF_LENGTH</name>
<description>Buffer Byte Length (Write-only)</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMASTATUS2</name>
<description>UDPHS DMA Channel Status Register (channel = 2)</description>
<addressOffset>0x0000032C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANN_ENB</name>
<description>Channel Enable Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHANN_ACT</name>
<description>Channel Active Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_ST</name>
<description>End of Channel Transfer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_BF_ST</name>
<description>End of Channel Buffer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DESC_LDST</name>
<description>Descriptor Loaded Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BUFF_COUNT</name>
<description>Buffer Byte Count</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMANXTDSC3</name>
<description>UDPHS DMA Next Descriptor Address Register (channel = 3)</description>
<addressOffset>0x00000330</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NXT_DSC_ADD</name>
<description>Next Descriptor Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAADDRESS3</name>
<description>UDPHS DMA Channel Address Register (channel = 3)</description>
<addressOffset>0x00000334</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BUFF_ADD</name>
<description>Buffer Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMACONTROL3</name>
<description>UDPHS DMA Channel Control Register (channel = 3)</description>
<addressOffset>0x00000338</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANN_ENB</name>
<description>(Channel Enable Command)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDNXT_DSC</name>
<description>Load Next Channel Transfer Descriptor Enable (Command)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_EN</name>
<description>End of Transfer Enable (Control)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_B_EN</name>
<description>End of Buffer Enable (Control)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_IT</name>
<description>End of Transfer Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_BUFFIT</name>
<description>End of Buffer Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DESC_LD_IT</name>
<description>Descriptor Loaded Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST_LCK</name>
<description>Burst Lock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BUFF_LENGTH</name>
<description>Buffer Byte Length (Write-only)</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMASTATUS3</name>
<description>UDPHS DMA Channel Status Register (channel = 3)</description>
<addressOffset>0x0000033C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANN_ENB</name>
<description>Channel Enable Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHANN_ACT</name>
<description>Channel Active Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_ST</name>
<description>End of Channel Transfer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_BF_ST</name>
<description>End of Channel Buffer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DESC_LDST</name>
<description>Descriptor Loaded Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BUFF_COUNT</name>
<description>Buffer Byte Count</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMANXTDSC4</name>
<description>UDPHS DMA Next Descriptor Address Register (channel = 4)</description>
<addressOffset>0x00000340</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NXT_DSC_ADD</name>
<description>Next Descriptor Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAADDRESS4</name>
<description>UDPHS DMA Channel Address Register (channel = 4)</description>
<addressOffset>0x00000344</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BUFF_ADD</name>
<description>Buffer Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMACONTROL4</name>
<description>UDPHS DMA Channel Control Register (channel = 4)</description>
<addressOffset>0x00000348</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANN_ENB</name>
<description>(Channel Enable Command)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDNXT_DSC</name>
<description>Load Next Channel Transfer Descriptor Enable (Command)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_EN</name>
<description>End of Transfer Enable (Control)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_B_EN</name>
<description>End of Buffer Enable (Control)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_IT</name>
<description>End of Transfer Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_BUFFIT</name>
<description>End of Buffer Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DESC_LD_IT</name>
<description>Descriptor Loaded Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST_LCK</name>
<description>Burst Lock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BUFF_LENGTH</name>
<description>Buffer Byte Length (Write-only)</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMASTATUS4</name>
<description>UDPHS DMA Channel Status Register (channel = 4)</description>
<addressOffset>0x0000034C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANN_ENB</name>
<description>Channel Enable Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHANN_ACT</name>
<description>Channel Active Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_ST</name>
<description>End of Channel Transfer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_BF_ST</name>
<description>End of Channel Buffer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DESC_LDST</name>
<description>Descriptor Loaded Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BUFF_COUNT</name>
<description>Buffer Byte Count</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMANXTDSC5</name>
<description>UDPHS DMA Next Descriptor Address Register (channel = 5)</description>
<addressOffset>0x00000350</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NXT_DSC_ADD</name>
<description>Next Descriptor Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMAADDRESS5</name>
<description>UDPHS DMA Channel Address Register (channel = 5)</description>
<addressOffset>0x00000354</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BUFF_ADD</name>
<description>Buffer Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMACONTROL5</name>
<description>UDPHS DMA Channel Control Register (channel = 5)</description>
<addressOffset>0x00000358</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANN_ENB</name>
<description>(Channel Enable Command)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDNXT_DSC</name>
<description>Load Next Channel Transfer Descriptor Enable (Command)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_EN</name>
<description>End of Transfer Enable (Control)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_B_EN</name>
<description>End of Buffer Enable (Control)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_IT</name>
<description>End of Transfer Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_BUFFIT</name>
<description>End of Buffer Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DESC_LD_IT</name>
<description>Descriptor Loaded Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST_LCK</name>
<description>Burst Lock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BUFF_LENGTH</name>
<description>Buffer Byte Length (Write-only)</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMASTATUS5</name>
<description>UDPHS DMA Channel Status Register (channel = 5)</description>
<addressOffset>0x0000035C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANN_ENB</name>
<description>Channel Enable Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHANN_ACT</name>
<description>Channel Active Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_TR_ST</name>
<description>End of Channel Transfer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>END_BF_ST</name>
<description>End of Channel Buffer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DESC_LDST</name>
<description>Descriptor Loaded Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BUFF_COUNT</name>
<description>Buffer Byte Count</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TC0</name>
<version>6082J</version>
<description>Timer Counter 0</description>
<groupName>TC</groupName>
<prependToName>TC0_</prependToName>
<baseAddress>0xFFF7C000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TC0</name>
<value>18</value>
</interrupt>
<registers>
<register>
<name>CCR0</name>
<description>Channel Control Register (channel = 0)</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CLKEN</name>
<description>Counter Clock Enable Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CLKDIS</name>
<description>Counter Clock Disable Command</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWTRG</name>
<description>Software Trigger Command</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR0</name>
<description>Channel Mode Register (channel = 0)</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDBSTOP</name>
<description>Counter Clock Stopped with RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDBDIS</name>
<description>Counter Clock Disable with RB Loading</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ETRGEDG</name>
<description>External Trigger Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ABETRG</name>
<description>TIOA or TIOB External Trigger Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCTRG</name>
<description>RC Compare Trigger Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVE</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDRA</name>
<description>RA Loading Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDRB</name>
<description>RB Loading Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CMR0_WAVE_EQ_1</name>
<description>Channel Mode Register (channel = 0)</description>
<alternateGroup>WAVE_EQ_1</alternateGroup>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPCSTOP</name>
<description>Counter Clock Stopped with RC Compare</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCDIS</name>
<description>Counter Clock Disable with RC Compare</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EEVTEDG</name>
<description>External Event Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EEVT</name>
<description>External Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIOB</name>
<description>TIOB</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ENETRG</name>
<description>External Event Trigger Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVSEL</name>
<description>Waveform Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>UP</name>
<description>UP mode without automatic trigger on RC Compare</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>UP_RC</name>
<description>UP mode with automatic trigger on RC Compare</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN</name>
<description>UPDOWN mode without automatic trigger on RC Compare</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN_RC</name>
<description>UPDOWN mode with automatic trigger on RC Compare</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAVE</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACPA</name>
<description>RA Compare Effect on TIOA</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACPC</name>
<description>RC Compare Effect on TIOA</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AEEVT</name>
<description>External Event Effect on TIOA</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASWTRG</name>
<description>Software Trigger Effect on TIOA</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPB</name>
<description>RB Compare Effect on TIOB</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPC</name>
<description>RC Compare Effect on TIOB</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BEEVT</name>
<description>External Event Effect on TIOB</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BSWTRG</name>
<description>Software Trigger Effect on TIOB</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CV0</name>
<description>Counter Value (channel = 0)</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RA0</name>
<description>Register A (channel = 0)</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RA</name>
<description>Register A</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RB0</name>
<description>Register B (channel = 0)</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RB</name>
<description>Register B</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC0</name>
<description>Register C (channel = 0)</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RC</name>
<description>Register C</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR0</name>
<description>Status Register (channel = 0)</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLKSTA</name>
<description>Clock Enabling Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOA</name>
<description>TIOA Mirror</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOB</name>
<description>TIOB Mirror</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER0</name>
<description>Interrupt Enable Register (channel = 0)</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR0</name>
<description>Interrupt Disable Register (channel = 0)</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR0</name>
<description>Interrupt Mask Register (channel = 0)</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CCR1</name>
<description>Channel Control Register (channel = 1)</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CLKEN</name>
<description>Counter Clock Enable Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CLKDIS</name>
<description>Counter Clock Disable Command</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWTRG</name>
<description>Software Trigger Command</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR1</name>
<description>Channel Mode Register (channel = 1)</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDBSTOP</name>
<description>Counter Clock Stopped with RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDBDIS</name>
<description>Counter Clock Disable with RB Loading</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ETRGEDG</name>
<description>External Trigger Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ABETRG</name>
<description>TIOA or TIOB External Trigger Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCTRG</name>
<description>RC Compare Trigger Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVE</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDRA</name>
<description>RA Loading Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDRB</name>
<description>RB Loading Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CMR1_WAVE_EQ_1</name>
<description>Channel Mode Register (channel = 1)</description>
<alternateGroup>WAVE_EQ_1</alternateGroup>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPCSTOP</name>
<description>Counter Clock Stopped with RC Compare</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCDIS</name>
<description>Counter Clock Disable with RC Compare</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EEVTEDG</name>
<description>External Event Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EEVT</name>
<description>External Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIOB</name>
<description>TIOB</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ENETRG</name>
<description>External Event Trigger Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVSEL</name>
<description>Waveform Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>UP</name>
<description>UP mode without automatic trigger on RC Compare</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>UP_RC</name>
<description>UP mode with automatic trigger on RC Compare</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN</name>
<description>UPDOWN mode without automatic trigger on RC Compare</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN_RC</name>
<description>UPDOWN mode with automatic trigger on RC Compare</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAVE</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACPA</name>
<description>RA Compare Effect on TIOA</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACPC</name>
<description>RC Compare Effect on TIOA</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AEEVT</name>
<description>External Event Effect on TIOA</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASWTRG</name>
<description>Software Trigger Effect on TIOA</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPB</name>
<description>RB Compare Effect on TIOB</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPC</name>
<description>RC Compare Effect on TIOB</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BEEVT</name>
<description>External Event Effect on TIOB</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BSWTRG</name>
<description>Software Trigger Effect on TIOB</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CV1</name>
<description>Counter Value (channel = 1)</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RA1</name>
<description>Register A (channel = 1)</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RA</name>
<description>Register A</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RB1</name>
<description>Register B (channel = 1)</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RB</name>
<description>Register B</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC1</name>
<description>Register C (channel = 1)</description>
<addressOffset>0x0000005C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RC</name>
<description>Register C</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR1</name>
<description>Status Register (channel = 1)</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLKSTA</name>
<description>Clock Enabling Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOA</name>
<description>TIOA Mirror</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOB</name>
<description>TIOB Mirror</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER1</name>
<description>Interrupt Enable Register (channel = 1)</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR1</name>
<description>Interrupt Disable Register (channel = 1)</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR1</name>
<description>Interrupt Mask Register (channel = 1)</description>
<addressOffset>0x0000006C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CCR2</name>
<description>Channel Control Register (channel = 2)</description>
<addressOffset>0x00000080</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CLKEN</name>
<description>Counter Clock Enable Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CLKDIS</name>
<description>Counter Clock Disable Command</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWTRG</name>
<description>Software Trigger Command</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR2</name>
<description>Channel Mode Register (channel = 2)</description>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDBSTOP</name>
<description>Counter Clock Stopped with RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDBDIS</name>
<description>Counter Clock Disable with RB Loading</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ETRGEDG</name>
<description>External Trigger Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ABETRG</name>
<description>TIOA or TIOB External Trigger Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCTRG</name>
<description>RC Compare Trigger Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVE</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDRA</name>
<description>RA Loading Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDRB</name>
<description>RB Loading Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CMR2_WAVE_EQ_1</name>
<description>Channel Mode Register (channel = 2)</description>
<alternateGroup>WAVE_EQ_1</alternateGroup>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPCSTOP</name>
<description>Counter Clock Stopped with RC Compare</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCDIS</name>
<description>Counter Clock Disable with RC Compare</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EEVTEDG</name>
<description>External Event Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EEVT</name>
<description>External Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIOB</name>
<description>TIOB</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ENETRG</name>
<description>External Event Trigger Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVSEL</name>
<description>Waveform Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>UP</name>
<description>UP mode without automatic trigger on RC Compare</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>UP_RC</name>
<description>UP mode with automatic trigger on RC Compare</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN</name>
<description>UPDOWN mode without automatic trigger on RC Compare</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN_RC</name>
<description>UPDOWN mode with automatic trigger on RC Compare</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAVE</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACPA</name>
<description>RA Compare Effect on TIOA</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACPC</name>
<description>RC Compare Effect on TIOA</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AEEVT</name>
<description>External Event Effect on TIOA</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASWTRG</name>
<description>Software Trigger Effect on TIOA</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPB</name>
<description>RB Compare Effect on TIOB</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPC</name>
<description>RC Compare Effect on TIOB</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BEEVT</name>
<description>External Event Effect on TIOB</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BSWTRG</name>
<description>Software Trigger Effect on TIOB</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CV2</name>
<description>Counter Value (channel = 2)</description>
<addressOffset>0x00000090</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RA2</name>
<description>Register A (channel = 2)</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RA</name>
<description>Register A</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RB2</name>
<description>Register B (channel = 2)</description>
<addressOffset>0x00000098</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RB</name>
<description>Register B</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC2</name>
<description>Register C (channel = 2)</description>
<addressOffset>0x0000009C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RC</name>
<description>Register C</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR2</name>
<description>Status Register (channel = 2)</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLKSTA</name>
<description>Clock Enabling Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOA</name>
<description>TIOA Mirror</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOB</name>
<description>TIOB Mirror</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER2</name>
<description>Interrupt Enable Register (channel = 2)</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR2</name>
<description>Interrupt Disable Register (channel = 2)</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR2</name>
<description>Interrupt Mask Register (channel = 2)</description>
<addressOffset>0x000000AC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>BCR</name>
<description>Block Control Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SYNC</name>
<description>Synchro Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BMR</name>
<description>Block Mode Register</description>
<addressOffset>0x000000C4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TC0XC0S</name>
<description>External Clock Signal 0 Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TCLK0</name>
<description>Signal connected to XC0: TCLK0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TCLK1</name>
<description>Signal connected to XC0: TCLK1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TCLK2</name>
<description>Signal connected to XC0: TCLK2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TC1XC1S</name>
<description>External Clock Signal 1 Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TCLK0</name>
<description>Signal connected to XC1: TCLK0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TCLK1</name>
<description>Signal connected to XC1: TCLK1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TCLK2</name>
<description>Signal connected to XC1: TCLK2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TC2XC2S</name>
<description>External Clock Signal 2 Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TCLK0</name>
<description>Signal connected to XC2: TCLK0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TCLK1</name>
<description>Signal connected to XC2: TCLK1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TCLK2</name>
<description>Signal connected to XC2: TCLK2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>HSMCI0</name>
<version>6449D</version>
<description>High Speed MultiMedia Card Interface 0</description>
<groupName>HSMCI</groupName>
<prependToName>HSMCI0_</prependToName>
<baseAddress>0xFFF80000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>HSMCI0</name>
<value>11</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>MCIEN</name>
<description>Multi-Media Interface Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MCIDIS</name>
<description>Multi-Media Interface Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PWSEN</name>
<description>Power Save Mode Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PWSDIS</name>
<description>Power Save Mode Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLKDIV</name>
<description>Clock Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PWSDIV</name>
<description>Power Saving Divider</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RDPROOF</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRPROOF</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FBYTE</name>
<description>Force Byte Transfer</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PADV</name>
<description>Padding Value</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BLKLEN</name>
<description>Data Block Length</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DTOR</name>
<description>Data Timeout Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTOCYC</name>
<description>Data Timeout Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTOMUL</name>
<description>Data Timeout Multiplier</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1</name>
<description>DTOCYC</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>DTOCYC x 16</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>DTOCYC x 128</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>DTOCYC x 256</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>DTOCYC x 1024</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>4096</name>
<description>DTOCYC x 4096</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>65536</name>
<description>DTOCYC x 65536</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1048576</name>
<description>DTOCYC x 1048576</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SDCR</name>
<description>SD/SDIO Card Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SDCSEL</name>
<description>SDCard/SDIO Slot</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>SLOTA</name>
<description>Slot A is selected.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SLOTB</name>
<description>-</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SLOTC</name>
<description>-</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SLOTD</name>
<description>-</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SDCBUS</name>
<description>SDCard/SDIO Bus Width</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1</name>
<description>1 bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>4</name>
<description>4 bit</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>8</name>
<description>8 bit</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>ARGR</name>
<description>Argument Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ARG</name>
<description>Command Argument</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMDR</name>
<description>Command Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CMDNB</name>
<description>Command Number</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSPTYP</name>
<description>Response Type</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NORESP</name>
<description>No response.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>48_BIT</name>
<description>48-bit response.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>136_BIT</name>
<description>136-bit response.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>R1B</name>
<description>R1b response type</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPCMD</name>
<description>Special Command</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>STD</name>
<description>Not a special CMD.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>INIT</name>
<description>Initialization CMD:74 clock cycles for initialization sequence.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SYNC</name>
<description>Synchronized CMD:Wait for the end of the current data block transfer before sending the pending command.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CE_ATA</name>
<description>CE-ATA Completion Signal disable Command.The host cancels the ability for the device to return a command completion signal on the command line.</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>IT_CMD</name>
<description>Interrupt command:Corresponds to the Interrupt Mode (CMD40).</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>IT_RESP</name>
<description>Interrupt response:Corresponds to the Interrupt Mode (CMD40).</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>BOR</name>
<description>Boot Operation Request.Start a boot operation mode, the host processor can read boot data from the MMC device directly.</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>EBO</name>
<description>End Boot Operation.This command allows the host processor to terminate the boot operation mode.</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>OPDCMD</name>
<description>Open Drain Command</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>PUSHPULL</name>
<description>Push pull command.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>OPENDRAIN</name>
<description>Open drain command.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MAXLAT</name>
<description>Max Latency for Command to Response</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>5</name>
<description>5-cycle max latency.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64-cycle max latency.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRCMD</name>
<description>Transfer Command</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO_DATA</name>
<description>No data transfer</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>START_DATA</name>
<description>Start data transfer</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP_DATA</name>
<description>Stop data transfer</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRDIR</name>
<description>Transfer Direction</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>WRITE</name>
<description>Write.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>READ</name>
<description>Read.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRTYP</name>
<description>Transfer Type</description>
<bitOffset>19</bitOffset>
<bitWidth>3</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>SINGLE</name>
<description>MMC/SDCard Single Block</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MULTIPLE</name>
<description>MMC/SDCard Multiple Block</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STREAM</name>
<description>MMC Stream</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BYTE</name>
<description>SDIO Byte</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>BLOCK</name>
<description>SDIO Block</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IOSPCMD</name>
<description>SDIO Special Command</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>STD</name>
<description>Not an SDIO Special Command</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SUSPEND</name>
<description>SDIO Suspend Command</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESUME</name>
<description>SDIO Resume Command</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ATACS</name>
<description>ATA with Command Completion Signal</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal operation mode.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>COMPLETION</name>
<description>This bit indicates that a completion signal is expected within a programmed amount of time (HSMCI_CSTOR).</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BOOT_ACK</name>
<description>Boot Operation Acknowledge.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BLKR</name>
<description>Block Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BCNT</name>
<description>MMC/SDIO Block Count - SDIO Byte Count</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MULTIPLE</name>
<description>MMC/SDCARD Multiple BlockFrom 1 to 65635: Value 0 corresponds to an infinite block transfer.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>BYTE</name>
<description>SDIO ByteFrom 1 to 512 bytes: Value 0 corresponds to a 512-byte transfer.Values from 0x200 to 0xFFFF are forbidden.</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>BLOCK</name>
<description>SDIO BlockFrom 1 to 511 blocks: Value 0 corresponds to an infinite block transfer.Values from 0x200 to 0xFFFF are forbidden.</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BLKLEN</name>
<description>Data Block Length</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CSTOR</name>
<description>Completion Signal Timeout Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CSTOCYC</name>
<description>Completion Signal Timeout Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSTOMUL</name>
<description>Completion Signal Timeout Multiplier</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1</name>
<description>CSTOCYC x 1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>CSTOCYC x 16</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>CSTOCYC x 128</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>CSTOCYC x 256</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>CSTOCYC x 1024</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>4096</name>
<description>CSTOCYC x 4096</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>65536</name>
<description>CSTOCYC x 65536</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1048576</name>
<description>CSTOCYC x 1048576</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>RSPR[%s]</name>
<description>Response Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RSP</name>
<description>Response</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RDR</name>
<description>Receive Data Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data to Read</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>TDR</name>
<description>Transmit Data Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>DATA</name>
<description>Data to Write</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0000C0E5</resetValue>
<fields>
<field>
<name>CMDRDY</name>
<description>Command Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Ready</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BLKE</name>
<description>Data Block Ended</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DTIP</name>
<description>Data Transfer in Progress</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NOTBUSY</name>
<description>HSMCI Not Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MCI_SDIOIRQA</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SDIOWAIT</name>
<description>SDIO Read Wait Operation Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSRCV</name>
<description>CE-ATA Completion Signal Received</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RINDE</name>
<description>Response Index Error</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RDIRE</name>
<description>Response Direction Error</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RCRCE</name>
<description>Response CRC Error</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RENDE</name>
<description>Response End Bit Error</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RTOE</name>
<description>Response Time-out Error</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DCRCE</name>
<description>Data CRC Error</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DTOE</name>
<description>Data Time-out Error</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSTOE</name>
<description>Completion Signal Time-out Error</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BLKOVRE</name>
<description>DMA Block Overrun Error</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMADONE</name>
<description>DMA Transfer done</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FIFOEMPTY</name>
<description>FIFO empty flag</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>XFRDONE</name>
<description>Transfer Done flag</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ACKRCV</name>
<description>Boot Operation Acknowledge Received</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ACKRCVE</name>
<description>Boot Operation Acknowledge Error</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CMDRDY</name>
<description>Command Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receiver Ready Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BLKE</name>
<description>Data Block Ended Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTIP</name>
<description>Data Transfer in Progress Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NOTBUSY</name>
<description>Data Not Busy Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MCI_SDIOIRQA</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SDIOWAIT</name>
<description>SDIO Read Wait Operation Status Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSRCV</name>
<description>Completion Signal Received Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RINDE</name>
<description>Response Index Error Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RDIRE</name>
<description>Response Direction Error Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCRCE</name>
<description>Response CRC Error Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RENDE</name>
<description>Response End Bit Error Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTOE</name>
<description>Response Time-out Error Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DCRCE</name>
<description>Data CRC Error Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTOE</name>
<description>Data Time-out Error Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSTOE</name>
<description>Completion Signal Timeout Error Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BLKOVRE</name>
<description>DMA Block Overrun Error Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DMADONE</name>
<description>DMA Transfer completed Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FIFOEMPTY</name>
<description>FIFO empty Interrupt enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>XFRDONE</name>
<description>Transfer Done Interrupt enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKRCV</name>
<description>Boot Acknowledge Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKRCVE</name>
<description>Boot Acknowledge Error Interrupt Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Interrupt Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CMDRDY</name>
<description>Command Ready Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receiver Ready Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BLKE</name>
<description>Data Block Ended Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTIP</name>
<description>Data Transfer in Progress Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NOTBUSY</name>
<description>Data Not Busy Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MCI_SDIOIRQA</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SDIOWAIT</name>
<description>SDIO Read Wait Operation Status Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSRCV</name>
<description>Completion Signal received interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RINDE</name>
<description>Response Index Error Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RDIRE</name>
<description>Response Direction Error Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCRCE</name>
<description>Response CRC Error Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RENDE</name>
<description>Response End Bit Error Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTOE</name>
<description>Response Time-out Error Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DCRCE</name>
<description>Data CRC Error Interrupt Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTOE</name>
<description>Data Time-out Error Interrupt Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSTOE</name>
<description>Completion Signal Time out Error Interrupt Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BLKOVRE</name>
<description>DMA Block Overrun Error Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DMADONE</name>
<description>DMA Transfer completed Interrupt Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FIFOEMPTY</name>
<description>FIFO empty Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>XFRDONE</name>
<description>Transfer Done Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKRCV</name>
<description>Boot Acknowledge Interrupt Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKRCVE</name>
<description>Boot Acknowledge Error Interrupt Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Interrupt Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMDRDY</name>
<description>Command Ready Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receiver Ready Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BLKE</name>
<description>Data Block Ended Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DTIP</name>
<description>Data Transfer in Progress Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NOTBUSY</name>
<description>Data Not Busy Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MCI_SDIOIRQA</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SDIOWAIT</name>
<description>SDIO Read Wait Operation Status Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSRCV</name>
<description>Completion Signal Received Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RINDE</name>
<description>Response Index Error Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RDIRE</name>
<description>Response Direction Error Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RCRCE</name>
<description>Response CRC Error Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RENDE</name>
<description>Response End Bit Error Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RTOE</name>
<description>Response Time-out Error Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DCRCE</name>
<description>Data CRC Error Interrupt Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DTOE</name>
<description>Data Time-out Error Interrupt Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSTOE</name>
<description>Completion Signal Time-out Error Interrupt Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BLKOVRE</name>
<description>DMA Block Overrun Error Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMADONE</name>
<description>DMA Transfer Completed Interrupt Mask</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FIFOEMPTY</name>
<description>FIFO Empty Interrupt Mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>XFRDONE</name>
<description>Transfer Done Interrupt Mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ACKRCV</name>
<description>Boot Operation Acknowledge Received Interrupt Mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ACKRCVE</name>
<description>Boot Operation Acknowledge Error Interrupt Mask</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Interrupt Mask</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Interrupt Mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMA</name>
<description>DMA Configuration Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OFFSET</name>
<description>DMA Write Buffer Offset</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHKSIZE</name>
<description>DMA Channel Read and Write Chunk Size</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1</name>
<description>1 data available</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>4</name>
<description>4 data available</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>8</name>
<description>8 data available</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 data available</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DMAEN</name>
<description>DMA Hardware Handshaking Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ROPT</name>
<description>Read Optimization with padding</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CFG</name>
<description>Configuration Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FIFOMODE</name>
<description>HSMCI Internal FIFO control mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FERRCTRL</name>
<description>Flow Error flag reset control mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HSMODE</name>
<description>High Speed Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LSYNC</name>
<description>Synchronize on the last block</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protection Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>WP_EN</name>
<description>Write Protection Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WP_KEY</name>
<description>Write Protection Key password</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protection Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>WP_VS</name>
<description>Write Protection Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>No Write Protection Violation occurred since the last read of this register (WP_SR)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WRITE</name>
<description>Write Protection detected unauthorized attempt to write a control register had occurred (since the last read.)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESET</name>
<description>Software reset had been performed while Write Protection was enabled (since the last read).</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both Write Protection violation and software reset with Write Protection enabled have occurred since the last read.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WP_VSRC</name>
<description>Write Protection Violation SouRCe</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TWI0</name>
<version>6212J</version>
<description>Two-wire Interface 0</description>
<groupName>TWI</groupName>
<prependToName>TWI0_</prependToName>
<baseAddress>0xFFF84000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TWI0</name>
<value>12</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>START</name>
<description>Send a START Condition</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STOP</name>
<description>Send a STOP Condition</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MSEN</name>
<description>TWI Master Mode Enabled</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MSDIS</name>
<description>TWI Master Mode Disabled</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVEN</name>
<description>TWI Slave Mode Enabled</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVDIS</name>
<description>TWI Slave Mode Disabled</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>QUICK</name>
<description>SMBUS Quick Command</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MMR</name>
<description>Master Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IADRSZ</name>
<description>Internal Device Address Size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>No internal device address</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1_BYTE</name>
<description>One-byte internal device address</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2_BYTE</name>
<description>Two-byte internal device address</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>3_BYTE</name>
<description>Three-byte internal device address</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MREAD</name>
<description>Master Read Direction</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DADR</name>
<description>Device Address</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SMR</name>
<description>Slave Mode Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SADR</name>
<description>Slave Address</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IADR</name>
<description>Internal Address Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IADR</name>
<description>Internal Address</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CWGR</name>
<description>Clock Waveform Generator Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLDIV</name>
<description>Clock Low Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHDIV</name>
<description>Clock High Divider</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CKDIV</name>
<description>Clock Divider</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0000F009</resetValue>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed (automatically set / reset)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready (automatically set / reset)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready (automatically set / reset)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SVREAD</name>
<description>Slave Read (automatically set / reset)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access (automatically set / reset)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access (clear on read)</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error (clear on read)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledged (clear on read)</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost (clear on read)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SCLWS</name>
<description>Clock Wait State (automatically set / reset)</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access (clear on read)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledge Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SCL_WS</name>
<description>Clock Wait State Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledge Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SCL_WS</name>
<description>Clock Wait State Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledge Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SCL_WS</name>
<description>Clock Wait State Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receive Holding Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXDATA</name>
<description>Master or Slave Receive Holding Data</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmit Holding Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXDATA</name>
<description>Master or Slave Transmit Holding Data</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TWI1</name>
<version>6212J</version>
<description>Two-wire Interface 1</description>
<groupName>TWI</groupName>
<prependToName>TWI1_</prependToName>
<baseAddress>0xFFF88000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TWI1</name>
<value>13</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>START</name>
<description>Send a START Condition</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STOP</name>
<description>Send a STOP Condition</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MSEN</name>
<description>TWI Master Mode Enabled</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MSDIS</name>
<description>TWI Master Mode Disabled</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVEN</name>
<description>TWI Slave Mode Enabled</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVDIS</name>
<description>TWI Slave Mode Disabled</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>QUICK</name>
<description>SMBUS Quick Command</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MMR</name>
<description>Master Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IADRSZ</name>
<description>Internal Device Address Size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>No internal device address</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1_BYTE</name>
<description>One-byte internal device address</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2_BYTE</name>
<description>Two-byte internal device address</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>3_BYTE</name>
<description>Three-byte internal device address</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MREAD</name>
<description>Master Read Direction</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DADR</name>
<description>Device Address</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SMR</name>
<description>Slave Mode Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SADR</name>
<description>Slave Address</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IADR</name>
<description>Internal Address Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IADR</name>
<description>Internal Address</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CWGR</name>
<description>Clock Waveform Generator Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLDIV</name>
<description>Clock Low Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHDIV</name>
<description>Clock High Divider</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CKDIV</name>
<description>Clock Divider</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0000F009</resetValue>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed (automatically set / reset)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready (automatically set / reset)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready (automatically set / reset)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SVREAD</name>
<description>Slave Read (automatically set / reset)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access (automatically set / reset)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access (clear on read)</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error (clear on read)</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledged (clear on read)</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost (clear on read)</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SCLWS</name>
<description>Clock Wait State (automatically set / reset)</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access (clear on read)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledge Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SCL_WS</name>
<description>Clock Wait State Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledge Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SCL_WS</name>
<description>Clock Wait State Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCOMP</name>
<description>Transmission Completed Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Holding Register Ready Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Holding Register Ready Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SVACC</name>
<description>Slave Access Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GACC</name>
<description>General Call Access Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Not Acknowledge Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ARBLST</name>
<description>Arbitration Lost Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SCL_WS</name>
<description>Clock Wait State Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOSACC</name>
<description>End Of Slave Access Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receive Holding Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXDATA</name>
<description>Master or Slave Receive Holding Data</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmit Holding Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXDATA</name>
<description>Master or Slave Transmit Holding Data</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>USART0</name>
<version>6089Z</version>
<description>Universal Synchronous Asynchronous Receiver Transmitter 0</description>
<groupName>USART</groupName>
<prependToName>USART0_</prependToName>
<baseAddress>0xFFF8C000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>USART0</name>
<value>7</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STTBRK</name>
<description>Start Break</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STPBRK</name>
<description>Stop Break</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STTTO</name>
<description>Start Time-out</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SENDA</name>
<description>Send Address</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTIT</name>
<description>Reset Iterations</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTNACK</name>
<description>Reset Non Acknowledge</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RETTO</name>
<description>Rearm Time-out</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTSEN</name>
<description>Request to Send Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTSDIS</name>
<description>Request to Send Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CR_SPI_MODE</name>
<description>Control Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCS</name>
<description>Force SPI Chip Select</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCS</name>
<description>Release SPI Chip Select</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>USART_MODE</name>
<description>USART Mode of Operation</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RS485</name>
<description>RS485</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>HW_HANDSHAKING</name>
<description>Hardware Handshaking</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>IS07816_T_0</name>
<description>IS07816 Protocol: T = 0</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>IS07816_T_1</name>
<description>IS07816 Protocol: T = 1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>IRDA</name>
<description>IrDA</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI Master</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI Slave</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>USCLKS</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock MCK is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV</name>
<description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SCK</name>
<description>Serial Clock SLK is selected</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHRL</name>
<description>Character Length.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>5_BIT</name>
<description>Character length is 5 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>6_BIT</name>
<description>Character length is 6 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>7_BIT</name>
<description>Character length is 7 bits</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8_BIT</name>
<description>Character length is 8 bits</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SYNC</name>
<description>Synchronous Mode Select</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PAR</name>
<description>Parity Type</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>EVEN</name>
<description>Even parity</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ODD</name>
<description>Odd parity</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPACE</name>
<description>Parity forced to 0 (Space)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MARK</name>
<description>Parity forced to 1 (Mark)</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>NO</name>
<description>No parity</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MULTIDROP</name>
<description>Multidrop mode</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBSTOP</name>
<description>Number of Stop Bits</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1_BIT</name>
<description>1 stop bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1_5_BIT</name>
<description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2_BIT</name>
<description>2 stop bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHMODE</name>
<description>Channel Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal Mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AUTOMATIC</name>
<description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCAL_LOOPBACK</name>
<description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>REMOTE_LOOPBACK</name>
<description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSBF</name>
<description>Bit Order</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODE9</name>
<description>9-bit Character Length</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CLKO</name>
<description>Clock Output Select</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OVER</name>
<description>Oversampling Mode</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INACK</name>
<description>Inhibit Non Acknowledge</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSNACK</name>
<description>Disable Successive NACK</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VAR_SYNC</name>
<description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAX_ITERATION</name>
<description>Maximum Number of Automatic Iteration</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FILTER</name>
<description>Infrared Receive Line Filter</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAN</name>
<description>Manchester Encoder/Decoder Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODSYNC</name>
<description>Manchester Synchronization Mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ONEBIT</name>
<description>Start Frame Delimiter Selector</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MR_SPI_MODE</name>
<description>Mode Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>USART_MODE</name>
<description>USART Mode of Operation</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI Master</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI Slave</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>USCLKS</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock MCK is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV</name>
<description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SCK</name>
<description>Serial Clock SLK is selected</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHRL</name>
<description>Character Length.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8_BIT</name>
<description>Character length is 8 bits</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPHA</name>
<description>SPI Clock Phase</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>SPI Clock Polarity</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRDBT</name>
<description>Wait Read Data Before Transfer</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ITER</name>
<description>Max number of Repetitions Reached Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IER_SPI_MODE</name>
<description>Interrupt Enable Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR_SPI_MODE</name>
<description>Interrupt Disable Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IMR_SPI_MODE</name>
<description>Interrupt Mask Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CSR</name>
<description>Channel Status Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Break Received/End of Break</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receiver Transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmitter Transfer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Receiver Time-out</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ITER</name>
<description>MaxNumber of Repetitions Reached</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmission Buffer Empty</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Reception Buffer Full</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Flag</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTS</name>
<description>Image of CTS Input</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MANERR</name>
<description>Manchester Error</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CSR_SPI_MODE</name>
<description>Channel Status Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receiver Holding Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCHR</name>
<description>Received Character</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSYNH</name>
<description>Received Sync</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmitter Holding Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCHR</name>
<description>Character to be Transmitted</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXSYNH</name>
<description>Sync Field to be Transmitted</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BRGR</name>
<description>Baud Rate Generator Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CD</name>
<description>Clock Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FP</name>
<description>Fractional Part</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RTOR</name>
<description>Receiver Time-out Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TO</name>
<description>Time-out Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TTGR</name>
<description>Transmitter Timeguard Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TG</name>
<description>Timeguard Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FIDI</name>
<description>FI DI Ratio Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000174</resetValue>
<fields>
<field>
<name>FI_DI_RATIO</name>
<description>FI Over DI Ratio Value</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>NER</name>
<description>Number of Errors Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>NB_ERRORS</name>
<description>Number of Errors</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IF</name>
<description>IrDA Filter Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IRDA_FILTER</name>
<description>IrDA Filter</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MAN</name>
<description>Manchester Encoder Decoder Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0xB0011004</resetValue>
<fields>
<field>
<name>TX_PL</name>
<description>Transmitter Preamble Length</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TX_PP</name>
<description>Transmitter Preamble Pattern</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALL_ONE</name>
<description>The preamble is composed of '1's</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALL_ZERO</name>
<description>The preamble is composed of '0's</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ZERO_ONE</name>
<description>The preamble is composed of '01's</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE_ZERO</name>
<description>The preamble is composed of '10's</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TX_MPOL</name>
<description>Transmitter Manchester Polarity</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_PL</name>
<description>Receiver Preamble Length</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_PP</name>
<description>Receiver Preamble Pattern detected</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALL_ONE</name>
<description>The preamble is composed of '1's</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALL_ZERO</name>
<description>The preamble is composed of '0's</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ZERO_ONE</name>
<description>The preamble is composed of '01's</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE_ZERO</name>
<description>The preamble is composed of '10's</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RX_MPOL</name>
<description>Receiver Manchester Polarity</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ONE</name>
<description>Must Be Set to 1</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DRIFT</name>
<description>Drift Compensation</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>USART1</name>
<version>6089Z</version>
<description>Universal Synchronous Asynchronous Receiver Transmitter 1</description>
<groupName>USART</groupName>
<prependToName>USART1_</prependToName>
<baseAddress>0xFFF90000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>USART1</name>
<value>8</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STTBRK</name>
<description>Start Break</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STPBRK</name>
<description>Stop Break</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STTTO</name>
<description>Start Time-out</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SENDA</name>
<description>Send Address</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTIT</name>
<description>Reset Iterations</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTNACK</name>
<description>Reset Non Acknowledge</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RETTO</name>
<description>Rearm Time-out</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTSEN</name>
<description>Request to Send Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTSDIS</name>
<description>Request to Send Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CR_SPI_MODE</name>
<description>Control Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCS</name>
<description>Force SPI Chip Select</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCS</name>
<description>Release SPI Chip Select</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>USART_MODE</name>
<description>USART Mode of Operation</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RS485</name>
<description>RS485</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>HW_HANDSHAKING</name>
<description>Hardware Handshaking</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>IS07816_T_0</name>
<description>IS07816 Protocol: T = 0</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>IS07816_T_1</name>
<description>IS07816 Protocol: T = 1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>IRDA</name>
<description>IrDA</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI Master</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI Slave</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>USCLKS</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock MCK is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV</name>
<description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SCK</name>
<description>Serial Clock SLK is selected</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHRL</name>
<description>Character Length.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>5_BIT</name>
<description>Character length is 5 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>6_BIT</name>
<description>Character length is 6 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>7_BIT</name>
<description>Character length is 7 bits</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8_BIT</name>
<description>Character length is 8 bits</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SYNC</name>
<description>Synchronous Mode Select</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PAR</name>
<description>Parity Type</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>EVEN</name>
<description>Even parity</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ODD</name>
<description>Odd parity</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPACE</name>
<description>Parity forced to 0 (Space)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MARK</name>
<description>Parity forced to 1 (Mark)</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>NO</name>
<description>No parity</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MULTIDROP</name>
<description>Multidrop mode</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBSTOP</name>
<description>Number of Stop Bits</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1_BIT</name>
<description>1 stop bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1_5_BIT</name>
<description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2_BIT</name>
<description>2 stop bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHMODE</name>
<description>Channel Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal Mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AUTOMATIC</name>
<description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCAL_LOOPBACK</name>
<description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>REMOTE_LOOPBACK</name>
<description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSBF</name>
<description>Bit Order</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODE9</name>
<description>9-bit Character Length</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CLKO</name>
<description>Clock Output Select</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OVER</name>
<description>Oversampling Mode</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INACK</name>
<description>Inhibit Non Acknowledge</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSNACK</name>
<description>Disable Successive NACK</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VAR_SYNC</name>
<description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAX_ITERATION</name>
<description>Maximum Number of Automatic Iteration</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FILTER</name>
<description>Infrared Receive Line Filter</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAN</name>
<description>Manchester Encoder/Decoder Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODSYNC</name>
<description>Manchester Synchronization Mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ONEBIT</name>
<description>Start Frame Delimiter Selector</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MR_SPI_MODE</name>
<description>Mode Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>USART_MODE</name>
<description>USART Mode of Operation</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI Master</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI Slave</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>USCLKS</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock MCK is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV</name>
<description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SCK</name>
<description>Serial Clock SLK is selected</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHRL</name>
<description>Character Length.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8_BIT</name>
<description>Character length is 8 bits</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPHA</name>
<description>SPI Clock Phase</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>SPI Clock Polarity</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRDBT</name>
<description>Wait Read Data Before Transfer</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ITER</name>
<description>Max number of Repetitions Reached Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IER_SPI_MODE</name>
<description>Interrupt Enable Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR_SPI_MODE</name>
<description>Interrupt Disable Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IMR_SPI_MODE</name>
<description>Interrupt Mask Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CSR</name>
<description>Channel Status Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Break Received/End of Break</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receiver Transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmitter Transfer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Receiver Time-out</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ITER</name>
<description>MaxNumber of Repetitions Reached</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmission Buffer Empty</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Reception Buffer Full</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Flag</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTS</name>
<description>Image of CTS Input</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MANERR</name>
<description>Manchester Error</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CSR_SPI_MODE</name>
<description>Channel Status Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receiver Holding Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCHR</name>
<description>Received Character</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSYNH</name>
<description>Received Sync</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmitter Holding Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCHR</name>
<description>Character to be Transmitted</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXSYNH</name>
<description>Sync Field to be Transmitted</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BRGR</name>
<description>Baud Rate Generator Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CD</name>
<description>Clock Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FP</name>
<description>Fractional Part</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RTOR</name>
<description>Receiver Time-out Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TO</name>
<description>Time-out Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TTGR</name>
<description>Transmitter Timeguard Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TG</name>
<description>Timeguard Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FIDI</name>
<description>FI DI Ratio Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000174</resetValue>
<fields>
<field>
<name>FI_DI_RATIO</name>
<description>FI Over DI Ratio Value</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>NER</name>
<description>Number of Errors Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>NB_ERRORS</name>
<description>Number of Errors</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IF</name>
<description>IrDA Filter Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IRDA_FILTER</name>
<description>IrDA Filter</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MAN</name>
<description>Manchester Encoder Decoder Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0xB0011004</resetValue>
<fields>
<field>
<name>TX_PL</name>
<description>Transmitter Preamble Length</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TX_PP</name>
<description>Transmitter Preamble Pattern</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALL_ONE</name>
<description>The preamble is composed of '1's</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALL_ZERO</name>
<description>The preamble is composed of '0's</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ZERO_ONE</name>
<description>The preamble is composed of '01's</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE_ZERO</name>
<description>The preamble is composed of '10's</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TX_MPOL</name>
<description>Transmitter Manchester Polarity</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_PL</name>
<description>Receiver Preamble Length</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_PP</name>
<description>Receiver Preamble Pattern detected</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALL_ONE</name>
<description>The preamble is composed of '1's</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALL_ZERO</name>
<description>The preamble is composed of '0's</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ZERO_ONE</name>
<description>The preamble is composed of '01's</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE_ZERO</name>
<description>The preamble is composed of '10's</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RX_MPOL</name>
<description>Receiver Manchester Polarity</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ONE</name>
<description>Must Be Set to 1</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DRIFT</name>
<description>Drift Compensation</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>USART2</name>
<version>6089Z</version>
<description>Universal Synchronous Asynchronous Receiver Transmitter 2</description>
<groupName>USART</groupName>
<prependToName>USART2_</prependToName>
<baseAddress>0xFFF94000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>USART2</name>
<value>9</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STTBRK</name>
<description>Start Break</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STPBRK</name>
<description>Stop Break</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STTTO</name>
<description>Start Time-out</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SENDA</name>
<description>Send Address</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTIT</name>
<description>Reset Iterations</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTNACK</name>
<description>Reset Non Acknowledge</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RETTO</name>
<description>Rearm Time-out</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTSEN</name>
<description>Request to Send Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTSDIS</name>
<description>Request to Send Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CR_SPI_MODE</name>
<description>Control Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCS</name>
<description>Force SPI Chip Select</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCS</name>
<description>Release SPI Chip Select</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>USART_MODE</name>
<description>USART Mode of Operation</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RS485</name>
<description>RS485</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>HW_HANDSHAKING</name>
<description>Hardware Handshaking</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>IS07816_T_0</name>
<description>IS07816 Protocol: T = 0</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>IS07816_T_1</name>
<description>IS07816 Protocol: T = 1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>IRDA</name>
<description>IrDA</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI Master</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI Slave</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>USCLKS</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock MCK is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV</name>
<description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SCK</name>
<description>Serial Clock SLK is selected</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHRL</name>
<description>Character Length.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>5_BIT</name>
<description>Character length is 5 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>6_BIT</name>
<description>Character length is 6 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>7_BIT</name>
<description>Character length is 7 bits</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8_BIT</name>
<description>Character length is 8 bits</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SYNC</name>
<description>Synchronous Mode Select</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PAR</name>
<description>Parity Type</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>EVEN</name>
<description>Even parity</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ODD</name>
<description>Odd parity</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPACE</name>
<description>Parity forced to 0 (Space)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MARK</name>
<description>Parity forced to 1 (Mark)</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>NO</name>
<description>No parity</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MULTIDROP</name>
<description>Multidrop mode</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBSTOP</name>
<description>Number of Stop Bits</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1_BIT</name>
<description>1 stop bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1_5_BIT</name>
<description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2_BIT</name>
<description>2 stop bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHMODE</name>
<description>Channel Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal Mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AUTOMATIC</name>
<description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCAL_LOOPBACK</name>
<description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>REMOTE_LOOPBACK</name>
<description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSBF</name>
<description>Bit Order</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODE9</name>
<description>9-bit Character Length</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CLKO</name>
<description>Clock Output Select</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OVER</name>
<description>Oversampling Mode</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INACK</name>
<description>Inhibit Non Acknowledge</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSNACK</name>
<description>Disable Successive NACK</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VAR_SYNC</name>
<description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAX_ITERATION</name>
<description>Maximum Number of Automatic Iteration</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FILTER</name>
<description>Infrared Receive Line Filter</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAN</name>
<description>Manchester Encoder/Decoder Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODSYNC</name>
<description>Manchester Synchronization Mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ONEBIT</name>
<description>Start Frame Delimiter Selector</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MR_SPI_MODE</name>
<description>Mode Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>USART_MODE</name>
<description>USART Mode of Operation</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI Master</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI Slave</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>USCLKS</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock MCK is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV</name>
<description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SCK</name>
<description>Serial Clock SLK is selected</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHRL</name>
<description>Character Length.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8_BIT</name>
<description>Character length is 8 bits</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPHA</name>
<description>SPI Clock Phase</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>SPI Clock Polarity</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRDBT</name>
<description>Wait Read Data Before Transfer</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ITER</name>
<description>Max number of Repetitions Reached Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IER_SPI_MODE</name>
<description>Interrupt Enable Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR_SPI_MODE</name>
<description>Interrupt Disable Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IMR_SPI_MODE</name>
<description>Interrupt Mask Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CSR</name>
<description>Channel Status Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Break Received/End of Break</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receiver Transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmitter Transfer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Receiver Time-out</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ITER</name>
<description>MaxNumber of Repetitions Reached</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmission Buffer Empty</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Reception Buffer Full</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Flag</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTS</name>
<description>Image of CTS Input</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MANERR</name>
<description>Manchester Error</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CSR_SPI_MODE</name>
<description>Channel Status Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receiver Holding Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCHR</name>
<description>Received Character</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSYNH</name>
<description>Received Sync</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmitter Holding Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCHR</name>
<description>Character to be Transmitted</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXSYNH</name>
<description>Sync Field to be Transmitted</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BRGR</name>
<description>Baud Rate Generator Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CD</name>
<description>Clock Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FP</name>
<description>Fractional Part</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RTOR</name>
<description>Receiver Time-out Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TO</name>
<description>Time-out Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TTGR</name>
<description>Transmitter Timeguard Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TG</name>
<description>Timeguard Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FIDI</name>
<description>FI DI Ratio Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000174</resetValue>
<fields>
<field>
<name>FI_DI_RATIO</name>
<description>FI Over DI Ratio Value</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>NER</name>
<description>Number of Errors Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>NB_ERRORS</name>
<description>Number of Errors</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IF</name>
<description>IrDA Filter Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IRDA_FILTER</name>
<description>IrDA Filter</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MAN</name>
<description>Manchester Encoder Decoder Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0xB0011004</resetValue>
<fields>
<field>
<name>TX_PL</name>
<description>Transmitter Preamble Length</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TX_PP</name>
<description>Transmitter Preamble Pattern</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALL_ONE</name>
<description>The preamble is composed of '1's</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALL_ZERO</name>
<description>The preamble is composed of '0's</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ZERO_ONE</name>
<description>The preamble is composed of '01's</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE_ZERO</name>
<description>The preamble is composed of '10's</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TX_MPOL</name>
<description>Transmitter Manchester Polarity</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_PL</name>
<description>Receiver Preamble Length</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_PP</name>
<description>Receiver Preamble Pattern detected</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALL_ONE</name>
<description>The preamble is composed of '1's</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALL_ZERO</name>
<description>The preamble is composed of '0's</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ZERO_ONE</name>
<description>The preamble is composed of '01's</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE_ZERO</name>
<description>The preamble is composed of '10's</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RX_MPOL</name>
<description>Receiver Manchester Polarity</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ONE</name>
<description>Must Be Set to 1</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DRIFT</name>
<description>Drift Compensation</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>USART3</name>
<version>6089Z</version>
<description>Universal Synchronous Asynchronous Receiver Transmitter 3</description>
<groupName>USART</groupName>
<prependToName>USART3_</prependToName>
<baseAddress>0xFFF98000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>USART3</name>
<value>10</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STTBRK</name>
<description>Start Break</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STPBRK</name>
<description>Stop Break</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STTTO</name>
<description>Start Time-out</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SENDA</name>
<description>Send Address</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTIT</name>
<description>Reset Iterations</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTNACK</name>
<description>Reset Non Acknowledge</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RETTO</name>
<description>Rearm Time-out</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTSEN</name>
<description>Request to Send Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTSDIS</name>
<description>Request to Send Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CR_SPI_MODE</name>
<description>Control Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FCS</name>
<description>Force SPI Chip Select</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCS</name>
<description>Release SPI Chip Select</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>USART_MODE</name>
<description>USART Mode of Operation</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RS485</name>
<description>RS485</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>HW_HANDSHAKING</name>
<description>Hardware Handshaking</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>IS07816_T_0</name>
<description>IS07816 Protocol: T = 0</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>IS07816_T_1</name>
<description>IS07816 Protocol: T = 1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>IRDA</name>
<description>IrDA</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI Master</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI Slave</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>USCLKS</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock MCK is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV</name>
<description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SCK</name>
<description>Serial Clock SLK is selected</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHRL</name>
<description>Character Length.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>5_BIT</name>
<description>Character length is 5 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>6_BIT</name>
<description>Character length is 6 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>7_BIT</name>
<description>Character length is 7 bits</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8_BIT</name>
<description>Character length is 8 bits</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SYNC</name>
<description>Synchronous Mode Select</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PAR</name>
<description>Parity Type</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>EVEN</name>
<description>Even parity</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ODD</name>
<description>Odd parity</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPACE</name>
<description>Parity forced to 0 (Space)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MARK</name>
<description>Parity forced to 1 (Mark)</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>NO</name>
<description>No parity</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MULTIDROP</name>
<description>Multidrop mode</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBSTOP</name>
<description>Number of Stop Bits</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1_BIT</name>
<description>1 stop bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1_5_BIT</name>
<description>1.5 stop bit (SYNC = 0) or reserved (SYNC = 1)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2_BIT</name>
<description>2 stop bits</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHMODE</name>
<description>Channel Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal Mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AUTOMATIC</name>
<description>Automatic Echo. Receiver input is connected to the TXD pin.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCAL_LOOPBACK</name>
<description>Local Loopback. Transmitter output is connected to the Receiver Input.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>REMOTE_LOOPBACK</name>
<description>Remote Loopback. RXD pin is internally connected to the TXD pin.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSBF</name>
<description>Bit Order</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODE9</name>
<description>9-bit Character Length</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CLKO</name>
<description>Clock Output Select</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OVER</name>
<description>Oversampling Mode</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INACK</name>
<description>Inhibit Non Acknowledge</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSNACK</name>
<description>Disable Successive NACK</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VAR_SYNC</name>
<description>Variable Synchronization of Command/Data Sync Start Frame Delimiter</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAX_ITERATION</name>
<description>Maximum Number of Automatic Iteration</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FILTER</name>
<description>Infrared Receive Line Filter</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MAN</name>
<description>Manchester Encoder/Decoder Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODSYNC</name>
<description>Manchester Synchronization Mode</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ONEBIT</name>
<description>Start Frame Delimiter Selector</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MR_SPI_MODE</name>
<description>Mode Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>USART_MODE</name>
<description>USART Mode of Operation</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI Master</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI Slave</description>
<value>0xF</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>USCLKS</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock MCK is selected</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV</name>
<description>Internal Clock Divided MCK/DIV (DIV=8) is selected</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SCK</name>
<description>Serial Clock SLK is selected</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHRL</name>
<description>Character Length.</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8_BIT</name>
<description>Character length is 8 bits</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPHA</name>
<description>SPI Clock Phase</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>SPI Clock Polarity</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRDBT</name>
<description>Wait Read Data Before Transfer</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ITER</name>
<description>Max number of Repetitions Reached Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Enable (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IER_SPI_MODE</name>
<description>Interrupt Enable Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Disable (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR_SPI_MODE</name>
<description>Interrupt Disable Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Receiver Break Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Transfer Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Time-out Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ITER</name>
<description>Max Number of Repetitions Reached Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Buffer Empty Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Buffer Full Interrupt Mask (available in all USART modes of operation)</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MANE</name>
<description>Manchester Error Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IMR_SPI_MODE</name>
<description>Interrupt Mask Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>RXRDY Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>TXRDY Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>TXEMPTY Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>SPI Underrun Error Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CSR</name>
<description>Channel Status Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBRK</name>
<description>Break Received/End of Break</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receiver Transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmitter Transfer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Receiver Time-out</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ITER</name>
<description>MaxNumber of Repetitions Reached</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmission Buffer Empty</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Reception Buffer Full</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NACK</name>
<description>Non AcknowledgeInterrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear to Send Input Change Flag</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTS</name>
<description>Image of CTS Input</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MANERR</name>
<description>Manchester Error</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CSR_SPI_MODE</name>
<description>Channel Status Register</description>
<alternateGroup>SPI_MODE</alternateGroup>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receiver Holding Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCHR</name>
<description>Received Character</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSYNH</name>
<description>Received Sync</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmitter Holding Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCHR</name>
<description>Character to be Transmitted</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXSYNH</name>
<description>Sync Field to be Transmitted</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BRGR</name>
<description>Baud Rate Generator Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CD</name>
<description>Clock Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FP</name>
<description>Fractional Part</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RTOR</name>
<description>Receiver Time-out Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TO</name>
<description>Time-out Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TTGR</name>
<description>Transmitter Timeguard Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TG</name>
<description>Timeguard Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FIDI</name>
<description>FI DI Ratio Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000174</resetValue>
<fields>
<field>
<name>FI_DI_RATIO</name>
<description>FI Over DI Ratio Value</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>NER</name>
<description>Number of Errors Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>NB_ERRORS</name>
<description>Number of Errors</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IF</name>
<description>IrDA Filter Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IRDA_FILTER</name>
<description>IrDA Filter</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MAN</name>
<description>Manchester Encoder Decoder Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0xB0011004</resetValue>
<fields>
<field>
<name>TX_PL</name>
<description>Transmitter Preamble Length</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TX_PP</name>
<description>Transmitter Preamble Pattern</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALL_ONE</name>
<description>The preamble is composed of '1's</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALL_ZERO</name>
<description>The preamble is composed of '0's</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ZERO_ONE</name>
<description>The preamble is composed of '01's</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE_ZERO</name>
<description>The preamble is composed of '10's</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TX_MPOL</name>
<description>Transmitter Manchester Polarity</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_PL</name>
<description>Receiver Preamble Length</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RX_PP</name>
<description>Receiver Preamble Pattern detected</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALL_ONE</name>
<description>The preamble is composed of '1's</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ALL_ZERO</name>
<description>The preamble is composed of '0's</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ZERO_ONE</name>
<description>The preamble is composed of '01's</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE_ZERO</name>
<description>The preamble is composed of '10's</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RX_MPOL</name>
<description>Receiver Manchester Polarity</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ONE</name>
<description>Must Be Set to 1</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DRIFT</name>
<description>Drift Compensation</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SSC0</name>
<version>6078I</version>
<description>Synchronous Serial Controller 0</description>
<groupName>SSC</groupName>
<prependToName>SSC0_</prependToName>
<baseAddress>0xFFF9C000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SSC0</name>
<value>16</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXEN</name>
<description>Receive Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receive Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmit Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmit Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR</name>
<description>Clock Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIV</name>
<description>Clock Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCMR</name>
<description>Receive Clock Mode Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CKS</name>
<description>Receive Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Divided Clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TK</name>
<description>TK Clock signal</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RK</name>
<description>RK pin</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CKO</name>
<description>Receive Clock Output Mode Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous Receive Clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSFER</name>
<description>Receive Clock only during data transfers</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CKI</name>
<description>Receive Clock Inversion</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CKG</name>
<description>Receive Clock Gating Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous Receive Clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSFER</name>
<description>Receive Clock only during data transfers</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>START</name>
<description>Receive Start Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSMIT</name>
<description>Transmit start</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_LOW</name>
<description>Detection of a low level on RF signal</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_HIGH</name>
<description>Detection of a high level on RF signal</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_FALLING</name>
<description>Detection of a falling edge on RF signal</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_RISING</name>
<description>Detection of a rising edge on RF signal</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_LEVEL</name>
<description>Detection of any level change on RF signal</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_EDGE</name>
<description>Detection of any edge on RF signal</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>CMP_0</name>
<description>Compare 0</description>
<value>0x8</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STOP</name>
<description>Receive Stop Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>STTDLY</name>
<description>Receive Start Delay</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PERIOD</name>
<description>Receive Period Divider Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RFMR</name>
<description>Receive Frame Mode Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATLEN</name>
<description>Data Length</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOOP</name>
<description>Loop Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MSBF</name>
<description>Most Significant Bit First</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATNB</name>
<description>Data Number per Frame</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSLEN</name>
<description>Receive Frame Sync Length</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSOS</name>
<description>Receive Frame Sync Output Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>NEGATIVE</name>
<description>Negative Pulse</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>POSITIVE</name>
<description>Positive Pulse</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Driven Low during data transfer</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>Driven High during data transfer</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLING</name>
<description>Toggling at each start of data transfer</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSEDGE</name>
<description>Frame Sync Edge Detection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>POSITIVE</name>
<description>Positive Edge Detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>NEGATIVE</name>
<description>Negative Edge Detection</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSLEN_EXT</name>
<description>FSLEN Field Extension</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCMR</name>
<description>Transmit Clock Mode Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CKS</name>
<description>Transmit Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Divided Clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TK</name>
<description>TK Clock signal</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RK</name>
<description>RK pin</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CKO</name>
<description>Transmit Clock Output Mode Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous Receive Clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSFER</name>
<description>Transmit Clock only during data transfers</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CKI</name>
<description>Transmit Clock Inversion</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CKG</name>
<description>Transmit Clock Gating Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Transmit Clock enabled only if TF Low</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSFER</name>
<description>Transmit Clock enabled only if TF High</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>START</name>
<description>Transmit Start Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous, as soon as a word is written in the SSC_THR Register (if Transmit is enabled), and immediately after the end of transfer of the previous data.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RECEIVE</name>
<description>Receive start</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_LOW</name>
<description>Detection of a low level on TF signal</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_HIGH</name>
<description>Detection of a high level on TF signal</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_FALLING</name>
<description>Detection of a falling edge on TF signal</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_RISING</name>
<description>Detection of a rising edge on TF signal</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_LEVEL</name>
<description>Detection of any level change on TF signal</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_EDGE</name>
<description>Detection of any edge on TF signal</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>CMP_0</name>
<description>Compare 0</description>
<value>0x8</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STTDLY</name>
<description>Transmit Start Delay</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PERIOD</name>
<description>Transmit Period Divider Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TFMR</name>
<description>Transmit Frame Mode Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATLEN</name>
<description>Data Length</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATDEF</name>
<description>Data Default Value</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MSBF</name>
<description>Most Significant Bit First</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATNB</name>
<description>Data Number per frame</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSLEN</name>
<description>Transmit Frame Syn Length</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSOS</name>
<description>Transmit Frame Sync Output Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>NEGATIVE</name>
<description>Negative Pulse</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>POSITIVE</name>
<description>Positive Pulse</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Driven Low during data transfer</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>Driven High during data transfer</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLING</name>
<description>Toggling at each start of data transfer</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSDEN</name>
<description>Frame Sync Data Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSEDGE</name>
<description>Frame Sync Edge Detection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>POSITIVE</name>
<description>Positive Edge Detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>NEGATIVE</name>
<description>Negative Edge Detection</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSLEN_EXT</name>
<description>FSLEN Field Extension</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receive Holding Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDAT</name>
<description>Receive Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmit Holding Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TDAT</name>
<description>Transmit Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>RSHR</name>
<description>Receive Sync. Holding Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RSDAT</name>
<description>Receive Synchronization Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>TSHR</name>
<description>Transmit Sync. Holding Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSDAT</name>
<description>Transmit Synchronization Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC0R</name>
<description>Receive Compare 0 Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CP0</name>
<description>Receive Compare Data 0</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC1R</name>
<description>Receive Compare 1 Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CP1</name>
<description>Receive Compare Data 1</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000CC</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmit Empty</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CP0</name>
<description>Compare 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CP1</name>
<description>Compare 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXSYN</name>
<description>Transmit Sync</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSYN</name>
<description>Receive Sync</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmit Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receive Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmit Empty Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Ready Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CP0</name>
<description>Compare 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CP1</name>
<description>Compare 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXSYN</name>
<description>Tx Sync Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXSYN</name>
<description>Rx Sync Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmit Empty Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Ready Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CP0</name>
<description>Compare 0 Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CP1</name>
<description>Compare 1 Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXSYN</name>
<description>Tx Sync Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXSYN</name>
<description>Rx Sync Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmit Empty Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Ready Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CP0</name>
<description>Compare 0 Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CP1</name>
<description>Compare 1 Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXSYN</name>
<description>Tx Sync Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSYN</name>
<description>Rx Sync Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SSC1</name>
<version>6078I</version>
<description>Synchronous Serial Controller 1</description>
<groupName>SSC</groupName>
<prependToName>SSC1_</prependToName>
<baseAddress>0xFFFA0000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SSC1</name>
<value>17</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXEN</name>
<description>Receive Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receive Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmit Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmit Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR</name>
<description>Clock Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIV</name>
<description>Clock Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCMR</name>
<description>Receive Clock Mode Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CKS</name>
<description>Receive Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Divided Clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TK</name>
<description>TK Clock signal</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RK</name>
<description>RK pin</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CKO</name>
<description>Receive Clock Output Mode Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous Receive Clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSFER</name>
<description>Receive Clock only during data transfers</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CKI</name>
<description>Receive Clock Inversion</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CKG</name>
<description>Receive Clock Gating Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous Receive Clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSFER</name>
<description>Receive Clock only during data transfers</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>START</name>
<description>Receive Start Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSMIT</name>
<description>Transmit start</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_LOW</name>
<description>Detection of a low level on RF signal</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_HIGH</name>
<description>Detection of a high level on RF signal</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_FALLING</name>
<description>Detection of a falling edge on RF signal</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_RISING</name>
<description>Detection of a rising edge on RF signal</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_LEVEL</name>
<description>Detection of any level change on RF signal</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_EDGE</name>
<description>Detection of any edge on RF signal</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>CMP_0</name>
<description>Compare 0</description>
<value>0x8</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STOP</name>
<description>Receive Stop Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>STTDLY</name>
<description>Receive Start Delay</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PERIOD</name>
<description>Receive Period Divider Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RFMR</name>
<description>Receive Frame Mode Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATLEN</name>
<description>Data Length</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOOP</name>
<description>Loop Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MSBF</name>
<description>Most Significant Bit First</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATNB</name>
<description>Data Number per Frame</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSLEN</name>
<description>Receive Frame Sync Length</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSOS</name>
<description>Receive Frame Sync Output Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>NEGATIVE</name>
<description>Negative Pulse</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>POSITIVE</name>
<description>Positive Pulse</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Driven Low during data transfer</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>Driven High during data transfer</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLING</name>
<description>Toggling at each start of data transfer</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSEDGE</name>
<description>Frame Sync Edge Detection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>POSITIVE</name>
<description>Positive Edge Detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>NEGATIVE</name>
<description>Negative Edge Detection</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSLEN_EXT</name>
<description>FSLEN Field Extension</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCMR</name>
<description>Transmit Clock Mode Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CKS</name>
<description>Transmit Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Divided Clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TK</name>
<description>TK Clock signal</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RK</name>
<description>RK pin</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CKO</name>
<description>Transmit Clock Output Mode Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous Receive Clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSFER</name>
<description>Transmit Clock only during data transfers</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CKI</name>
<description>Transmit Clock Inversion</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CKG</name>
<description>Transmit Clock Gating Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Transmit Clock enabled only if TF Low</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSFER</name>
<description>Transmit Clock enabled only if TF High</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>START</name>
<description>Transmit Start Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CONTINUOUS</name>
<description>Continuous, as soon as a word is written in the SSC_THR Register (if Transmit is enabled), and immediately after the end of transfer of the previous data.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RECEIVE</name>
<description>Receive start</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_LOW</name>
<description>Detection of a low level on TF signal</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_HIGH</name>
<description>Detection of a high level on TF signal</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_FALLING</name>
<description>Detection of a falling edge on TF signal</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_RISING</name>
<description>Detection of a rising edge on TF signal</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_LEVEL</name>
<description>Detection of any level change on TF signal</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>RF_EDGE</name>
<description>Detection of any edge on TF signal</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>CMP_0</name>
<description>Compare 0</description>
<value>0x8</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STTDLY</name>
<description>Transmit Start Delay</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PERIOD</name>
<description>Transmit Period Divider Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TFMR</name>
<description>Transmit Frame Mode Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATLEN</name>
<description>Data Length</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATDEF</name>
<description>Data Default Value</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MSBF</name>
<description>Most Significant Bit First</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATNB</name>
<description>Data Number per frame</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSLEN</name>
<description>Transmit Frame Syn Length</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSOS</name>
<description>Transmit Frame Sync Output Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>NEGATIVE</name>
<description>Negative Pulse</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>POSITIVE</name>
<description>Positive Pulse</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Driven Low during data transfer</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>Driven High during data transfer</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLING</name>
<description>Toggling at each start of data transfer</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSDEN</name>
<description>Frame Sync Data Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FSEDGE</name>
<description>Frame Sync Edge Detection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>POSITIVE</name>
<description>Positive Edge Detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>NEGATIVE</name>
<description>Negative Edge Detection</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSLEN_EXT</name>
<description>FSLEN Field Extension</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receive Holding Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDAT</name>
<description>Receive Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmit Holding Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TDAT</name>
<description>Transmit Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>RSHR</name>
<description>Receive Sync. Holding Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RSDAT</name>
<description>Receive Synchronization Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>TSHR</name>
<description>Transmit Sync. Holding Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSDAT</name>
<description>Transmit Synchronization Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC0R</name>
<description>Receive Compare 0 Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CP0</name>
<description>Receive Compare Data 0</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC1R</name>
<description>Receive Compare 1 Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CP1</name>
<description>Receive Compare Data 1</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000CC</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmit Empty</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CP0</name>
<description>Compare 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CP1</name>
<description>Compare 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXSYN</name>
<description>Transmit Sync</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSYN</name>
<description>Receive Sync</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmit Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receive Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmit Empty Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Ready Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CP0</name>
<description>Compare 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CP1</name>
<description>Compare 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXSYN</name>
<description>Tx Sync Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXSYN</name>
<description>Rx Sync Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmit Empty Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Ready Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CP0</name>
<description>Compare 0 Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CP1</name>
<description>Compare 1 Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXSYN</name>
<description>Tx Sync Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXSYN</name>
<description>Rx Sync Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmit Empty Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receive Ready Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CP0</name>
<description>Compare 0 Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CP1</name>
<description>Compare 1 Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXSYN</name>
<description>Tx Sync Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXSYN</name>
<description>Rx Sync Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SPI0</name>
<version>6088O</version>
<description>Serial Peripheral Interface 0</description>
<groupName>SPI</groupName>
<prependToName>SPI0_</prependToName>
<baseAddress>0xFFFA4000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SPI0</name>
<value>14</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SPIEN</name>
<description>SPI Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SPIDIS</name>
<description>SPI Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWRST</name>
<description>SPI Software Reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LASTXFER</name>
<description>Last Transfer</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MSTR</name>
<description>Master/Slave Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PS</name>
<description>Peripheral Select</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PCSDEC</name>
<description>Chip Select Decode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODFDIS</name>
<description>Mode Fault Detection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDRBT</name>
<description>Wait Data Read Before Transfer</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LLB</name>
<description>Local Loopback Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PCS</name>
<description>Peripheral Chip Select</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLYBCS</name>
<description>Delay Between Chip Selects</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RDR</name>
<description>Receive Data Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RD</name>
<description>Receive Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCS</name>
<description>Peripheral Chip Select</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>TDR</name>
<description>Transmit Data Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TD</name>
<description>Transmit Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCS</name>
<description>Peripheral Chip Select</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LASTXFER</name>
<description>Last Transfer</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000F0</resetValue>
<fields>
<field>
<name>RDRF</name>
<description>Receive Data Register Full</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TDRE</name>
<description>Transmit Data Register Empty</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MODF</name>
<description>Mode Fault Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRES</name>
<description>Overrun Error Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of RX buffer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of TX buffer</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>RX Buffer Full</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>TX Buffer Empty</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NSSR</name>
<description>NSS Rising</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmission Registers Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SPIENS</name>
<description>SPI Enable Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RDRF</name>
<description>Receive Data Register Full Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TDRE</name>
<description>SPI Transmit Data Register Empty Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MODF</name>
<description>Mode Fault Error Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRES</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NSSR</name>
<description>NSS Rising Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmission Registers Empty Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RDRF</name>
<description>Receive Data Register Full Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TDRE</name>
<description>SPI Transmit Data Register Empty Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MODF</name>
<description>Mode Fault Error Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRES</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NSSR</name>
<description>NSS Rising Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmission Registers Empty Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDRF</name>
<description>Receive Data Register Full Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TDRE</name>
<description>SPI Transmit Data Register Empty Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MODF</name>
<description>Mode Fault Error Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRES</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NSSR</name>
<description>NSS Rising Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmission Registers Empty Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>CSR[%s]</name>
<description>Chip Select Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>CPOL</name>
<description>Clock Polarity</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCPHA</name>
<description>Clock Phase</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSAAT</name>
<description>Chip Select Active After Transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BITS</name>
<description>Bits Per Transfer</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8_BIT</name>
<description>8 bits for transfer</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>9_BIT</name>
<description>9 bits for transfer</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>10_BIT</name>
<description>10 bits for transfer</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>11_BIT</name>
<description>11 bits for transfer</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>12_BIT</name>
<description>12 bits for transfer</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>13_BIT</name>
<description>13 bits for transfer</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>14_BIT</name>
<description>14 bits for transfer</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>15_BIT</name>
<description>15 bits for transfer</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>16_BIT</name>
<description>16 bits for transfer</description>
<value>0x8</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SCBR</name>
<description>Serial Clock Baud Rate</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLYBS</name>
<description>Delay Before SPCK</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLYBCT</name>
<description>Delay Between Consecutive Transfers</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SPI1</name>
<version>6088O</version>
<description>Serial Peripheral Interface 1</description>
<groupName>SPI</groupName>
<prependToName>SPI1_</prependToName>
<baseAddress>0xFFFA8000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SPI1</name>
<value>15</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SPIEN</name>
<description>SPI Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SPIDIS</name>
<description>SPI Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWRST</name>
<description>SPI Software Reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LASTXFER</name>
<description>Last Transfer</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MSTR</name>
<description>Master/Slave Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PS</name>
<description>Peripheral Select</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PCSDEC</name>
<description>Chip Select Decode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MODFDIS</name>
<description>Mode Fault Detection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDRBT</name>
<description>Wait Data Read Before Transfer</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LLB</name>
<description>Local Loopback Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PCS</name>
<description>Peripheral Chip Select</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLYBCS</name>
<description>Delay Between Chip Selects</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RDR</name>
<description>Receive Data Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RD</name>
<description>Receive Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCS</name>
<description>Peripheral Chip Select</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>TDR</name>
<description>Transmit Data Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TD</name>
<description>Transmit Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCS</name>
<description>Peripheral Chip Select</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LASTXFER</name>
<description>Last Transfer</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000F0</resetValue>
<fields>
<field>
<name>RDRF</name>
<description>Receive Data Register Full</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TDRE</name>
<description>Transmit Data Register Empty</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MODF</name>
<description>Mode Fault Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRES</name>
<description>Overrun Error Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of RX buffer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of TX buffer</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>RX Buffer Full</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>TX Buffer Empty</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NSSR</name>
<description>NSS Rising</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmission Registers Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SPIENS</name>
<description>SPI Enable Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RDRF</name>
<description>Receive Data Register Full Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TDRE</name>
<description>SPI Transmit Data Register Empty Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MODF</name>
<description>Mode Fault Error Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRES</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NSSR</name>
<description>NSS Rising Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmission Registers Empty Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RDRF</name>
<description>Receive Data Register Full Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TDRE</name>
<description>SPI Transmit Data Register Empty Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MODF</name>
<description>Mode Fault Error Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRES</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NSSR</name>
<description>NSS Rising Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmission Registers Empty Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDRF</name>
<description>Receive Data Register Full Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TDRE</name>
<description>SPI Transmit Data Register Empty Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MODF</name>
<description>Mode Fault Error Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRES</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmit Buffer Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NSSR</name>
<description>NSS Rising Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmission Registers Empty Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>CSR[%s]</name>
<description>Chip Select Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>CPOL</name>
<description>Clock Polarity</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCPHA</name>
<description>Clock Phase</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSAAT</name>
<description>Chip Select Active After Transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BITS</name>
<description>Bits Per Transfer</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>8_BIT</name>
<description>8 bits for transfer</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>9_BIT</name>
<description>9 bits for transfer</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>10_BIT</name>
<description>10 bits for transfer</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>11_BIT</name>
<description>11 bits for transfer</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>12_BIT</name>
<description>12 bits for transfer</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>13_BIT</name>
<description>13 bits for transfer</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>14_BIT</name>
<description>14 bits for transfer</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>15_BIT</name>
<description>15 bits for transfer</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>16_BIT</name>
<description>16 bits for transfer</description>
<value>0x8</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SCBR</name>
<description>Serial Clock Baud Rate</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLYBS</name>
<description>Delay Before SPCK</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLYBCT</name>
<description>Delay Between Consecutive Transfers</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>AC97C</name>
<version>6144D</version>
<description>AC97 Controller</description>
<prependToName>AC97C_</prependToName>
<baseAddress>0xFFFAC000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>AC97C</name>
<value>24</value>
</interrupt>
<registers>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENA</name>
<description>AC97 Controller Global Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRST</name>
<description>Warm Reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VRA</name>
<description>Variable Rate (for Data Slots 3-12)</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ICA</name>
<description>Input Channel Assignment Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHID3</name>
<description>Channel ID for the input slot 3</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID4</name>
<description>Channel ID for the input slot 4</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID5</name>
<description>Channel ID for the input slot 5</description>
<bitOffset>6</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID6</name>
<description>Channel ID for the input slot 6</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID7</name>
<description>Channel ID for the input slot 7</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID8</name>
<description>Channel ID for the input slot 8</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID9</name>
<description>Channel ID for the input slot 9</description>
<bitOffset>18</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID10</name>
<description>Channel ID for the input slot 10</description>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID11</name>
<description>Channel ID for the input slot 11</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID12</name>
<description>Channel ID for the input slot 12</description>
<bitOffset>27</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>OCA</name>
<description>Output Channel Assignment Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHID3</name>
<description>Channel ID for the output slot 3</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID4</name>
<description>Channel ID for the output slot 4</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID5</name>
<description>Channel ID for the output slot 5</description>
<bitOffset>6</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID6</name>
<description>Channel ID for the output slot 6</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID7</name>
<description>Channel ID for the output slot 7</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID8</name>
<description>Channel ID for the output slot 8</description>
<bitOffset>15</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID9</name>
<description>Channel ID for the output slot 9</description>
<bitOffset>18</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID10</name>
<description>Channel ID for the output slot 10</description>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID11</name>
<description>Channel ID for the output slot 11</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHID12</name>
<description>Channel ID for the output slot 12</description>
<bitOffset>27</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CARHR</name>
<description>Channel A Receive Holding Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDATA</name>
<description>Receive Data</description>
<bitOffset>0</bitOffset>
<bitWidth>20</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CATHR</name>
<description>Channel A Transmit Holding Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TDATA</name>
<description>Transmit Data</description>
<bitOffset>0</bitOffset>
<bitWidth>20</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CASR</name>
<description>Channel A Status Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Channel Transmit Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Channel Transmit Empty</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRUN</name>
<description>Transmit Underrun</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Channel Receive Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission for Channel A</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty for Channel A</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception for Channel A</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full for Channel A</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CAMR</name>
<description>Channel A Mode Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Channel Transmit Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Channel Transmit Empty Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UNRUN</name>
<description>Transmit Underrun Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXRDY</name>
<description>Channel Receive Ready Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission for Channel A Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty for Channel A Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception for Channel A Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full for Channel A Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SIZE</name>
<description>Channel A Data Size</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CEM</name>
<description>Channel A Endian Mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CEN</name>
<description>Channel A Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PDCEN</name>
<description>Peripheral Data Controller Channel Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CBRHR</name>
<description>Channel B Receive Holding Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDATA</name>
<description>Receive Data</description>
<bitOffset>0</bitOffset>
<bitWidth>20</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CBTHR</name>
<description>Channel B Transmit Holding Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TDATA</name>
<description>Transmit Data</description>
<bitOffset>0</bitOffset>
<bitWidth>20</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CBSR</name>
<description>Channel B Status Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Channel Transmit Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Channel Transmit Empty</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRUN</name>
<description>Transmit Underrun</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Channel Receive Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission for Channel B</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty for Channel B</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception for Channel B</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full for Channel B</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CBMR</name>
<description>Channel B Mode Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Channel Transmit Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Channel Transmit Empty Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UNRUN</name>
<description>Transmit Underrun Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXRDY</name>
<description>Channel Receive Ready Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmission for Channel B Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmit Buffer Empty for Channel B Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Reception for Channel B Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full for Channel B Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SIZE</name>
<description>Channel B Data Size</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CEM</name>
<description>Channel B Endian Mode</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CEN</name>
<description>Channel B Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PDCEN</name>
<description>Peripheral Data Controller Channel Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CORHR</name>
<description>Codec Channel Receive Holding Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SDATA</name>
<description>Status Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>COTHR</name>
<description>Codec Channel Transmit Holding Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CDATA</name>
<description>Command Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CADDR</name>
<description>CODEC control register index</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>write-only</access>
</field>
<field>
<name>READ</name>
<description>Read-write command</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>COSR</name>
<description>Codec Status Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Channel Transmit Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Channel Transmit Empty</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRUN</name>
<description>Transmit Underrun</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Channel Receive Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>COMR</name>
<description>Codec Mode Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXRDY</name>
<description>Channel Transmit Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Channel Transmit Empty Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UNRUN</name>
<description>Transmit Underrun Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXRDY</name>
<description>Channel Receive Ready Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OVRUN</name>
<description>Receive Overrun Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SOF</name>
<description>Start Of Frame</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WKUP</name>
<description>Wake Up detection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COEVT</name>
<description>CODEC Channel Event</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CAEVT</name>
<description>Channel A Event</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBEVT</name>
<description>Channel B Event</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SOF</name>
<description>Start Of Frame</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>WKUP</name>
<description>Wake Up</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COEVT</name>
<description>Codec Event</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CAEVT</name>
<description>Channel A Event</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBEVT</name>
<description>Channel B Event</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SOF</name>
<description>Start Of Frame</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>WKUP</name>
<description>Wake Up</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COEVT</name>
<description>Codec Event</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CAEVT</name>
<description>Channel A Event</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBEVT</name>
<description>Channel B Event</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000005C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SOF</name>
<description>Start Of Frame</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WKUP</name>
<description>Wake Up</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COEVT</name>
<description>Codec Event</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CAEVT</name>
<description>Channel A Event</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBEVT</name>
<description>Channel B Event</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TSADCC</name>
<version>6286D</version>
<description>Touch Screen ADC Controller</description>
<prependToName>TSADCC_</prependToName>
<baseAddress>0xFFFB0000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TSADCC</name>
<value>20</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>START</name>
<description>Start Conversion</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSAMOD</name>
<description>Touch Screen ADC Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PDCEN</name>
<description>PDC transfer in Touchscreen/Interleaved mode or Manual mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOWRES</name>
<description>Resolution Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SLEEP</name>
<description>Sleep Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PENDET</name>
<description>Pen Detect Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PRES</name>
<description>Pressure Measurement Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PRESCAL</name>
<description>Prescaler Rate Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>STARTUP</name>
<description>Start Up Time</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SHTIM</name>
<description>Sample &amp; Hold Time for ADC Channels</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PENDBC</name>
<description>Pen Detect debouncing period</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TRGR</name>
<description>Trigger Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TRGMOD</name>
<description>Trigger Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRGPER</name>
<description>Trigger Period</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TSR</name>
<description>Touch Screen Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSFREQ</name>
<description>Touch Screen Frequency in Interleaved Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSSHTIM</name>
<description>Sample &amp; Hold Time for Touch Screen Channels</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CHER</name>
<description>Channel Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CH0</name>
<description>Channel 0 Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH1</name>
<description>Channel 1 Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH2</name>
<description>Channel 2 Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH3</name>
<description>Channel 3 Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH4</name>
<description>Channel 4 Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH5</name>
<description>Channel 5 Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH6</name>
<description>Channel 6 Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH7</name>
<description>Channel 7 Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CHDR</name>
<description>Channel Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CH0</name>
<description>Channel 0 Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH1</name>
<description>Channel 1 Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH2</name>
<description>Channel 2 Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH3</name>
<description>Channel 3 Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH4</name>
<description>Channel 4 Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH5</name>
<description>Channel 5 Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH6</name>
<description>Channel 6 Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CH7</name>
<description>Channel 7 Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CHSR</name>
<description>Channel Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CH0</name>
<description>Channel 0 Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH1</name>
<description>Channel 1 Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH2</name>
<description>Channel 2 Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH3</name>
<description>Channel 3 Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH4</name>
<description>Channel 4 Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH5</name>
<description>Channel 5 Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH6</name>
<description>Channel 6 Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CH7</name>
<description>Channel 7 Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000C0000</resetValue>
<fields>
<field>
<name>EOC0</name>
<description>End of Conversion 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC1</name>
<description>End of Conversion 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC2</name>
<description>End of Conversion 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC3</name>
<description>End of Conversion 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC4</name>
<description>End of Conversion 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC5</name>
<description>End of Conversion 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC6</name>
<description>End of Conversion 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC7</name>
<description>End of Conversion 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE0</name>
<description>Overrun Error 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE1</name>
<description>Overrun Error 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE2</name>
<description>Overrun Error 2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE3</name>
<description>Overrun Error 3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE4</name>
<description>Overrun Error 4</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE5</name>
<description>Overrun Error 5</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE6</name>
<description>Overrun Error 6</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE7</name>
<description>Overrun Error 7</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DRDY</name>
<description>Data Ready</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GOVRE</name>
<description>General Overrun Error</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of RX Buffer</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>RX Buffer Full</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENCNT</name>
<description>Pen Contact</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NOCNT</name>
<description>No Contact</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOCXP</name>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOCZ1</name>
<description>End of Conversion Z1 Measure</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOCZ2</name>
<description>End of Conversion Z2 Measure</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVREXP</name>
<description>Overrun Error on X Position</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVREZ1</name>
<description>Overrun Error on Z1 Measure</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVREZ2</name>
<description>Overrun Error on Z2 Measure</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>LCDR</name>
<description>Last Converted Data Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LDATA</name>
<description>Last Data Converted</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EOC0</name>
<description>End of Conversion Interrupt Enable 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC1</name>
<description>End of Conversion Interrupt Enable 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC2</name>
<description>End of Conversion Interrupt Enable 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC3</name>
<description>End of Conversion Interrupt Enable 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC4</name>
<description>End of Conversion Interrupt Enable 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC5</name>
<description>End of Conversion Interrupt Enable 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC6</name>
<description>End of Conversion Interrupt Enable 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC7</name>
<description>End of Conversion Interrupt Enable 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE0</name>
<description>Overrun Error Interrupt Enable 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE1</name>
<description>Overrun Error Interrupt Enable 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE2</name>
<description>Overrun Error Interrupt Enable 2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE3</name>
<description>Overrun Error Interrupt Enable 3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE4</name>
<description>Overrun Error Interrupt Enable 4</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE5</name>
<description>Overrun Error Interrupt Enable 5</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE6</name>
<description>Overrun Error Interrupt Enable 6</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE7</name>
<description>Overrun Error Interrupt Enable 7</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DRDY</name>
<description>Data Ready Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>GOVRE</name>
<description>General Overrun Error Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PENCNT</name>
<description>Pen Contact</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NOCNT</name>
<description>No Contact</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOCXP</name>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOCZ1</name>
<description>End of Conversion Z1 Measure</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOCZ2</name>
<description>End of Conversion Z2 Measure</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVREXP</name>
<description>Overrun Error Interrupt Enable X Position</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVREZ1</name>
<description>Overrun Error Interrupt Enable Z1 Measure</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVREZ2</name>
<description>Overrun Error Interrupt Enable Z2 Measure</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>EOC0</name>
<description>End of Conversion Interrupt Disable 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC1</name>
<description>End of Conversion Interrupt Disable 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC2</name>
<description>End of Conversion Interrupt Disable 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC3</name>
<description>End of Conversion Interrupt Disable 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC4</name>
<description>End of Conversion Interrupt Disable 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC5</name>
<description>End of Conversion Interrupt Disable 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC6</name>
<description>End of Conversion Interrupt Disable 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOC7</name>
<description>End of Conversion Interrupt Disable 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE0</name>
<description>Overrun Error Interrupt Disable 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE1</name>
<description>Overrun Error Interrupt Disable 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE2</name>
<description>Overrun Error Interrupt Disable 2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE3</name>
<description>Overrun Error Interrupt Disable 3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE4</name>
<description>Overrun Error Interrupt Disable 4</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE5</name>
<description>Overrun Error Interrupt Disable 5</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE6</name>
<description>Overrun Error Interrupt Disable 6</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE7</name>
<description>Overrun Error Interrupt Disable 7</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DRDY</name>
<description>Data Ready Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>GOVRE</name>
<description>General Overrun Error Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PENCNT</name>
<description>Pen Contact</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NOCNT</name>
<description>No Contact</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOCXP</name>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOCZ1</name>
<description>End of Conversion Z1 Measure</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EOCZ2</name>
<description>End of Conversion Z2 Measure</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVREXP</name>
<description>Overrun Error Interrupt Disable X Position</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVREZ1</name>
<description>Overrun Error Interrupt Disable Z1 Measure</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVREZ2</name>
<description>Overrun Error Interrupt Disable Z2 Measure</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EOC0</name>
<description>End of Conversion Interrupt Mask 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC1</name>
<description>End of Conversion Interrupt Mask 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC2</name>
<description>End of Conversion Interrupt Mask 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC3</name>
<description>End of Conversion Interrupt Mask 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC4</name>
<description>End of Conversion Interrupt Mask 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC5</name>
<description>End of Conversion Interrupt Mask 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC6</name>
<description>End of Conversion Interrupt Mask 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC7</name>
<description>End of Conversion Interrupt Mask 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE0</name>
<description>Overrun Error Interrupt Mask 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE1</name>
<description>Overrun Error Interrupt Mask 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE2</name>
<description>Overrun Error Interrupt Mask 2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE3</name>
<description>Overrun Error Interrupt Mask 3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE4</name>
<description>Overrun Error Interrupt Mask 4</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE5</name>
<description>Overrun Error Interrupt Mask 5</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE6</name>
<description>Overrun Error Interrupt Mask 6</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE7</name>
<description>Overrun Error Interrupt Mask 7</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DRDY</name>
<description>Data Ready Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GOVRE</name>
<description>General Overrun Error Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receive Buffer Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENCNT</name>
<description>Pen Contact</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NOCNT</name>
<description>No Contact</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOCXP</name>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOCZ1</name>
<description>End of Conversion Z1 Measure</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOCZ2</name>
<description>End of Conversion Z2 Measure</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVREXP</name>
<description>Overrun Error Interrupt Mask X Position</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVREZ1</name>
<description>Overrun Error Interrupt Mask Z1 Measure</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVREZ2</name>
<description>Overrun Error Interrupt Mask Z2 Measure</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-7</dimIndex>
<name>CDR[%s]</name>
<description>Channel Data Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>DATA</name>
<description>Channel Data</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>XPDR</name>
<description>X Position Data Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>X Position Data</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>Z1DR</name>
<description>Z1 Data Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Z1 Measurement Data</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>Z2DR</name>
<description>Z2 Data Register</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>Z2</name>
<description>Z2 Measurement Data</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MSCR</name>
<description>Manual Switch Command Register</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>XP</name>
<description>Switch Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>XM</name>
<description>Switch Command</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>YP</name>
<description>Switch Command</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>YM</name>
<description>Switch Command</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protection Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>WPEN</name>
<description>Write Protection of TSADCC_MR, TSADCC_TRGR and TSADCC_TSR</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>KEY</name>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protection Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>WPS</name>
<description>Write Protection Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OFFSET_ERR</name>
<description>Offset error</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>ISI</name>
<version>6350E</version>
<description>Image Sensor Interface</description>
<baseAddress>0xFFFB4000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>ISI</name>
<value>26</value>
</interrupt>
<registers>
<register>
<name>ISI_CFG1</name>
<description>ISI Configuration 1 Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HSYNC_POL</name>
<description>Horizontal Synchronization Polarity</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>VSYNC_POL</name>
<description>Vertical Synchronization Polarity</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PIXCLK_POL</name>
<description>Pixel Clock Polarity</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EMB_SYNC</name>
<description>Embedded Synchronization</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CRC_SYNC</name>
<description>Embedded Synchronization Correction</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FRATE</name>
<description>Frame Rate [0..7]</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DISCR</name>
<description>Disable Codec Request</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FULL</name>
<description>Full Mode is Allowed</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>THMASK</name>
<description>Threshold Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SLD</name>
<description>Start of Line Delay</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SFD</name>
<description>Start of Frame Delay</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ISI_CFG2</name>
<description>ISI Configuration 2 Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IM_VSIZE</name>
<description>Vertical Size of the Image Sensor [0..2047]:</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GS_MODE</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RGB_MODE</name>
<description>RGB Input Mode:</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GRAYSCALE</name>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RGB_SWAP</name>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>COL_SPACE</name>
<description>Color Space for the Image Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IM_HSIZE</name>
<description>Horizontal Size of the Image Sensor [0..2047]</description>
<bitOffset>16</bitOffset>
<bitWidth>11</bitWidth>
<access>read-write</access>
</field>
<field>
<name>YCC_SWAP</name>
<description>Defines the YCC Image Data</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RGB_CFG</name>
<description>Defines RGB Pattern when RGB_MODE is set to 1</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ISI_PSIZE</name>
<description>ISI Preview Size Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PREV_VSIZE</name>
<description>Vertical Size for the Preview Path</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PREV_HSIZE</name>
<description>Horizontal Size for the Preview Path</description>
<bitOffset>16</bitOffset>
<bitWidth>10</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ISI_PDECF</name>
<description>ISI Preview Decimation Factor Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000010</resetValue>
<fields>
<field>
<name>DEC_FACTOR</name>
<description>Decimation Factor</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ISI_Y2R_SET0</name>
<description>ISI CSC YCrCb To RGB Set 0 Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x6832CC95</resetValue>
<fields>
<field>
<name>C0</name>
<description>Color Space Conversion Matrix Coefficient C0</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>C1</name>
<description>Color Space Conversion Matrix Coefficient C1</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>C2</name>
<description>Color Space Conversion Matrix Coefficient C2</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>C3</name>
<description>Color Space Conversion Matrix Coefficient C3</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ISI_Y2R_SET1</name>
<description>ISI CSC YCrCb To RGB Set 1 Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00007102</resetValue>
<fields>
<field>
<name>C4</name>
<description>Color Space Conversion Matrix Coefficient C4</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Yoff</name>
<description>Color Space Conversion Luminance Default Offset</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Croff</name>
<description>Color Space Conversion Red Chrominance Default Offset</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Cboff</name>
<description>Color Space Conversion Blue Chrominance Default Offset</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ISI_R2Y_SET0</name>
<description>ISI CSC RGB To YCrCb Set 0 Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01324145</resetValue>
<fields>
<field>
<name>C0</name>
<description>Color Space Conversion Matrix Coefficient C0</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>C1</name>
<description>Color Space Conversion Matrix Coefficient C1</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>C2</name>
<description>Color Space Conversion Matrix Coefficient C2</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Roff</name>
<description>Color Space Conversion Red Component Offset</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ISI_R2Y_SET1</name>
<description>ISI CSC RGB To YCrCb Set 1 Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01245E38</resetValue>
<fields>
<field>
<name>C3</name>
<description>Color Space Conversion Matrix Coefficient C3</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>C4</name>
<description>Color Space Conversion Matrix Coefficient C4</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>C5</name>
<description>Color Space Conversion Matrix Coefficient C5</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Goff</name>
<description>Color Space Conversion Green Component Offset</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ISI_R2Y_SET2</name>
<description>ISI CSC RGB To YCrCb Set 2 Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01384A4B</resetValue>
<fields>
<field>
<name>C6</name>
<description>Color Space Conversion Matrix Coefficient C6</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>C7</name>
<description>Color Space Conversion Matrix Coefficient C7</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>C8</name>
<description>Color Space Conversion Matrix Coefficient C8</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Boff</name>
<description>Color Space Conversion Blue Component Offset</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ISI_CR</name>
<description>ISI Control Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ISI_EN</name>
<description>ISI Module Enable Request</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ISI_DIS</name>
<description>ISI Module Disable Request</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ISI_SRST</name>
<description>ISI Software Reset Request</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ISI_CDC</name>
<description>ISI Codec Request</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ISI_SR</name>
<description>ISI Status Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENABLE</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DIS_DONE</name>
<description>Module Disable Request has Terminated</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SRST</name>
<description>Module Software Reset Request has Terminated</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CDC_PND</name>
<description>Pending Codec Request (this bit is a status bit)</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>VSYNC</name>
<description>Vertical Synchronization</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PXFR_DONE</name>
<description>Preview DMA Transfer has Terminated.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CXFR_DONE</name>
<description>Codec DMA Transfer has Terminated.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SIP</name>
<description>Synchronization in Progress (this is a status bit)</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P_OVR</name>
<description>Preview Datapath Overflow</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>C_OVR</name>
<description>Codec Datapath Overflow</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CRC_ERR</name>
<description>CRC Synchronization Error</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FR_OVR</name>
<description>Frame Rate Overrun</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISI_IER</name>
<description>ISI Interrupt Enable Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIS_DONE</name>
<description>Disable Done Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SRST</name>
<description>Software Reset Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>VSYNC</name>
<description>Vertical Synchronization Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PXFR_DONE</name>
<description>Preview DMA Transfer Done Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CXFR_DONE</name>
<description>Codec DMA Transfer Done Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P_OVR</name>
<description>Preview Datapath Overflow Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>C_OVR</name>
<description>Codec Datapath Overflow Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CRC_ERR</name>
<description>Embedded Synchronization CRC Error Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FR_OVR</name>
<description>Frame Rate Overflow Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ISI_IDR</name>
<description>ISI Interrupt Disable Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIS_DONE</name>
<description>Disable Done Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SRST</name>
<description>Software Reset Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>VSYNC</name>
<description>Vertical Synchronization Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PXFR_DONE</name>
<description>Preview DMA Transfer Done Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CXFR_DONE</name>
<description>Codec DMA Transfer Done Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P_OVR</name>
<description>Preview Datapath Overflow Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>C_OVR</name>
<description>Codec Datapath Overflow Interrupt Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CRC_ERR</name>
<description>Embedded Synchronization CRC Error Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FR_OVR</name>
<description>Frame Rate Overflow Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ISI_IMR</name>
<description>ISI Interrupt Mask Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIS_DONE</name>
<description>Module Disable Operation Completed</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SRST</name>
<description>Software Reset Completed</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>VSYNC</name>
<description>Vertical Synchronization</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PXFR_DONE</name>
<description>Preview DMA Transfer Interrupt</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CXFR_DONE</name>
<description>Codec DMA Transfer Interrupt</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P_OVR</name>
<description>FIFO Preview Overflow</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>C_OVR</name>
<description>FIFO Codec Overflow</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CRC_ERR</name>
<description>CRC Synchronization Error</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FR_OVR</name>
<description>Frame Rate Overrun</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMA_CHER</name>
<description>DMA Channel Enable Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P_CH_EN</name>
<description>Preview Channel Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>C_CH_EN</name>
<description>Codec Channel Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>DMA_CHDR</name>
<description>DMA Channel Disable Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P_CH_DIS</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>C_CH_DIS</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>DMA_CHSR</name>
<description>DMA Channel Status Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P_CH_S</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>C_CH_S</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMA_P_ADDR</name>
<description>DMA Preview Base Address Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P_ADDR</name>
<description>Preview Image Base Address. (This address is word aligned.)</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMA_P_CTRL</name>
<description>DMA Preview Control Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P_FETCH</name>
<description>Descriptor Fetch Control Field</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P_WB</name>
<description>Descriptor Writeback Control Field</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P_IEN</name>
<description>Transfer Done Flag Control</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P_DONE</name>
<description>(This field is only updated in the memory.)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMA_P_DSCR</name>
<description>DMA Preview Descriptor Address Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P_DSCR</name>
<description>Preview Descriptor Base Address (This address is word aligned.)</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMA_C_ADDR</name>
<description>DMA Codec Base Address Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>C_ADDR</name>
<description>Codec Image Base Address (This address is word aligned.)</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMA_C_CTRL</name>
<description>DMA Codec Control Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>C_FETCH</name>
<description>Descriptor Fetch Control Field</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>C_WB</name>
<description>Descriptor Writeback Control Field</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>C_IEN</name>
<description>Transfer Done flag control</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>C_DONE</name>
<description>(This field is only updated in the memory.)</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DMA_C_DSCR</name>
<description>DMA Codec Descriptor Address Register</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>C_DSCR</name>
<description>Codec Descriptor Base Address (This address is word aligned.)</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ISI_WPCR</name>
<description>Write Protection Control Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WP_EN</name>
<description>Write Protection Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WP_KEY</name>
<description>Write Protection KEY Password</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ISI_WPSR</name>
<description>Write Protection Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WP_VS</name>
<description>Write Protection Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WP_VSRC</name>
<description>Write Protection Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PWM</name>
<version>6044I</version>
<description>Pulse Width Modulation Controller</description>
<prependToName>PWM_</prependToName>
<baseAddress>0xFFFB8000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PWM</name>
<value>19</value>
</interrupt>
<registers>
<register>
<name>MR</name>
<description>PWM Mode Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIVA</name>
<description>CLKA, CLKB Divide Factor</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CLK_OFF</name>
<description>CLKA, CLKB clock is turned off</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_DIV1</name>
<description>CLKA, CLKB clock is clock selected by PREA, PREB</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PREA</name>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV2</name>
<description>Master Clock divided by 2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV4</name>
<description>Master Clock divided by 4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV8</name>
<description>Master Clock divided by 8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV16</name>
<description>Master Clock divided by 16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV32</name>
<description>Master Clock divided by 32</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV64</name>
<description>Master Clock divided by 64</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV128</name>
<description>Master Clock divided by 128</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV256</name>
<description>Master Clock divided by 256</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV512</name>
<description>Master Clock divided by 512</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV1024</name>
<description>Master Clock divided by 1024</description>
<value>0xA</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIVB</name>
<description>CLKA, CLKB Divide Factor</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CLK_OFF</name>
<description>CLKA, CLKB clock is turned off</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_DIV1</name>
<description>CLKA, CLKB clock is clock selected by PREA, PREB</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PREB</name>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV2</name>
<description>Master Clock divided by 2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV4</name>
<description>Master Clock divided by 4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV8</name>
<description>Master Clock divided by 8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV16</name>
<description>Master Clock divided by 16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV32</name>
<description>Master Clock divided by 32</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV64</name>
<description>Master Clock divided by 64</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV128</name>
<description>Master Clock divided by 128</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV256</name>
<description>Master Clock divided by 256</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV512</name>
<description>Master Clock divided by 512</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV1024</name>
<description>Master Clock divided by 1024</description>
<value>0xA</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>ENA</name>
<description>PWM Enable Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CHID0</name>
<description>Channel ID</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID1</name>
<description>Channel ID</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID2</name>
<description>Channel ID</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID3</name>
<description>Channel ID</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>DIS</name>
<description>PWM Disable Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CHID0</name>
<description>Channel ID</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID1</name>
<description>Channel ID</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID2</name>
<description>Channel ID</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID3</name>
<description>Channel ID</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>PWM Status Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHID0</name>
<description>Channel ID</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID1</name>
<description>Channel ID</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID2</name>
<description>Channel ID</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID3</name>
<description>Channel ID</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>PWM Interrupt Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CHID0</name>
<description>Channel ID.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID1</name>
<description>Channel ID.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID2</name>
<description>Channel ID.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID3</name>
<description>Channel ID.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>PWM Interrupt Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CHID0</name>
<description>Channel ID.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID1</name>
<description>Channel ID.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID2</name>
<description>Channel ID.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CHID3</name>
<description>Channel ID.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>PWM Interrupt Mask Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHID0</name>
<description>Channel ID.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID1</name>
<description>Channel ID.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID2</name>
<description>Channel ID.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID3</name>
<description>Channel ID.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>PWM Interrupt Status Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHID0</name>
<description>Channel ID</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID1</name>
<description>Channel ID</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID2</name>
<description>Channel ID</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHID3</name>
<description>Channel ID</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CMR0</name>
<description>PWM Channel Mode Register (ch_num = 0)</description>
<addressOffset>0x00000200</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRE</name>
<description>Channel Pre-scaler</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV2</name>
<description>Master Clock divided by 2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV4</name>
<description>Master Clock divided by 4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV8</name>
<description>Master Clock divided by 8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV16</name>
<description>Master Clock divided by 16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV32</name>
<description>Master Clock divided by 32</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV64</name>
<description>Master Clock divided by 64</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV128</name>
<description>Master Clock divided by 128</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV256</name>
<description>Master Clock divided by 256</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV512</name>
<description>Master Clock divided by 512</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV1024</name>
<description>Master Clock divided by 1024</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKA</name>
<description>Clock A</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKB</name>
<description>Clock B</description>
<value>0xC</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CALG</name>
<description>Channel Alignment</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>Channel Polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPD</name>
<description>Channel Update Period</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CDTY0</name>
<description>PWM Channel Duty Cycle Register (ch_num = 0)</description>
<addressOffset>0x00000204</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CDTY</name>
<description>Channel Duty Cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CPRD0</name>
<description>PWM Channel Period Register (ch_num = 0)</description>
<addressOffset>0x00000208</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRD</name>
<description>Channel Period</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CCNT0</name>
<description>PWM Channel Counter Register (ch_num = 0)</description>
<addressOffset>0x0000020C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>Channel Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CUPD0</name>
<description>PWM Channel Update Register (ch_num = 0)</description>
<addressOffset>0x00000210</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CUPD</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR1</name>
<description>PWM Channel Mode Register (ch_num = 1)</description>
<addressOffset>0x00000220</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRE</name>
<description>Channel Pre-scaler</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV2</name>
<description>Master Clock divided by 2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV4</name>
<description>Master Clock divided by 4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV8</name>
<description>Master Clock divided by 8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV16</name>
<description>Master Clock divided by 16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV32</name>
<description>Master Clock divided by 32</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV64</name>
<description>Master Clock divided by 64</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV128</name>
<description>Master Clock divided by 128</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV256</name>
<description>Master Clock divided by 256</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV512</name>
<description>Master Clock divided by 512</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV1024</name>
<description>Master Clock divided by 1024</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKA</name>
<description>Clock A</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKB</name>
<description>Clock B</description>
<value>0xC</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CALG</name>
<description>Channel Alignment</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>Channel Polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPD</name>
<description>Channel Update Period</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CDTY1</name>
<description>PWM Channel Duty Cycle Register (ch_num = 1)</description>
<addressOffset>0x00000224</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CDTY</name>
<description>Channel Duty Cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CPRD1</name>
<description>PWM Channel Period Register (ch_num = 1)</description>
<addressOffset>0x00000228</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRD</name>
<description>Channel Period</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CCNT1</name>
<description>PWM Channel Counter Register (ch_num = 1)</description>
<addressOffset>0x0000022C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>Channel Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CUPD1</name>
<description>PWM Channel Update Register (ch_num = 1)</description>
<addressOffset>0x00000230</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CUPD</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR2</name>
<description>PWM Channel Mode Register (ch_num = 2)</description>
<addressOffset>0x00000240</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRE</name>
<description>Channel Pre-scaler</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV2</name>
<description>Master Clock divided by 2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV4</name>
<description>Master Clock divided by 4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV8</name>
<description>Master Clock divided by 8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV16</name>
<description>Master Clock divided by 16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV32</name>
<description>Master Clock divided by 32</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV64</name>
<description>Master Clock divided by 64</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV128</name>
<description>Master Clock divided by 128</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV256</name>
<description>Master Clock divided by 256</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV512</name>
<description>Master Clock divided by 512</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV1024</name>
<description>Master Clock divided by 1024</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKA</name>
<description>Clock A</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKB</name>
<description>Clock B</description>
<value>0xC</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CALG</name>
<description>Channel Alignment</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>Channel Polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPD</name>
<description>Channel Update Period</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CDTY2</name>
<description>PWM Channel Duty Cycle Register (ch_num = 2)</description>
<addressOffset>0x00000244</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CDTY</name>
<description>Channel Duty Cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CPRD2</name>
<description>PWM Channel Period Register (ch_num = 2)</description>
<addressOffset>0x00000248</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRD</name>
<description>Channel Period</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CCNT2</name>
<description>PWM Channel Counter Register (ch_num = 2)</description>
<addressOffset>0x0000024C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>Channel Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CUPD2</name>
<description>PWM Channel Update Register (ch_num = 2)</description>
<addressOffset>0x00000250</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CUPD</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR3</name>
<description>PWM Channel Mode Register (ch_num = 3)</description>
<addressOffset>0x00000260</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRE</name>
<description>Channel Pre-scaler</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MCK</name>
<description>Master Clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV2</name>
<description>Master Clock divided by 2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV4</name>
<description>Master Clock divided by 4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV8</name>
<description>Master Clock divided by 8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV16</name>
<description>Master Clock divided by 16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV32</name>
<description>Master Clock divided by 32</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV64</name>
<description>Master Clock divided by 64</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV128</name>
<description>Master Clock divided by 128</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV256</name>
<description>Master Clock divided by 256</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV512</name>
<description>Master Clock divided by 512</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKDIV1024</name>
<description>Master Clock divided by 1024</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKA</name>
<description>Clock A</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
<name>CLKB</name>
<description>Clock B</description>
<value>0xC</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CALG</name>
<description>Channel Alignment</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPOL</name>
<description>Channel Polarity</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPD</name>
<description>Channel Update Period</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CDTY3</name>
<description>PWM Channel Duty Cycle Register (ch_num = 3)</description>
<addressOffset>0x00000264</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CDTY</name>
<description>Channel Duty Cycle</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CPRD3</name>
<description>PWM Channel Period Register (ch_num = 3)</description>
<addressOffset>0x00000268</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPRD</name>
<description>Channel Period</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CCNT3</name>
<description>PWM Channel Counter Register (ch_num = 3)</description>
<addressOffset>0x0000026C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CNT</name>
<description>Channel Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CUPD3</name>
<description>PWM Channel Update Register (ch_num = 3)</description>
<addressOffset>0x00000270</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CUPD</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>EMAC</name>
<version>6119F</version>
<description>Ethernet MAC 10/100</description>
<prependToName>EMAC_</prependToName>
<baseAddress>0xFFFBC000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>EMAC</name>
<value>25</value>
</interrupt>
<registers>
<register>
<name>NCR</name>
<description>Network Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LB</name>
<description>LoopBack</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LLB</name>
<description>Loopback local</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RE</name>
<description>Receive enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TE</name>
<description>Transmit enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MPE</name>
<description>Management port enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CLRSTAT</name>
<description>Clear statistics registers</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>INCSTAT</name>
<description>Increment statistics registers</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WESTAT</name>
<description>Write enable for statistics registers</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BP</name>
<description>Back pressure</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TSTART</name>
<description>Start transmission</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>THALT</name>
<description>Transmit halt</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>NCFG</name>
<description>Network Configuration Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000800</resetValue>
<fields>
<field>
<name>SPD</name>
<description>Speed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FD</name>
<description>Full Duplex</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>JFRAME</name>
<description>Jumbo Frames</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CAF</name>
<description>Copy All Frames</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NBC</name>
<description>No Broadcast</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MTI</name>
<description>Multicast Hash Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UNI</name>
<description>Unicast Hash Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BIG</name>
<description>Receive 1536 bytes frames</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CLK</name>
<description>MDC clock divider</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RTY</name>
<description>Retry test</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PAE</name>
<description>Pause Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RBOF</name>
<description>Receive Buffer Offset</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RLCE</name>
<description>Receive Length field Checking Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DRFCS</name>
<description>Discard Receive FCS</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EFRHD</name>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>IRXFCS</name>
<description>Ignore RX FCS</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>NSR</name>
<description>Network Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>MDIO</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>IDLE</name>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>TSR</name>
<description>Transmit Status Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UBR</name>
<description>Used Bit Read</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>COL</name>
<description>Collision Occurred</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RLE</name>
<description>Retry Limit exceeded</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TGO</name>
<description>Transmit Go</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BEX</name>
<description>Buffers exhausted mid frame</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>COMP</name>
<description>Transmit Complete</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UND</name>
<description>Transmit Underrun</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RBQP</name>
<description>Receive Buffer Queue Pointer Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<description>Receive buffer queue pointer address</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TBQP</name>
<description>Transmit Buffer Queue Pointer Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<description>Transmit buffer queue pointer address</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RSR</name>
<description>Receive Status Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BNA</name>
<description>Buffer Not Available</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REC</name>
<description>Frame Received</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OVR</name>
<description>Receive Overrun</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MFD</name>
<description>Management Frame Done</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RCOMP</name>
<description>Receive Complete</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RXUBR</name>
<description>Receive Used Bit Read</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXUBR</name>
<description>Transmit Used Bit Read</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TUND</name>
<description>Ethernet Transmit Buffer Underrun</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RLE</name>
<description>Retry Limit Exceeded</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXERR</name>
<description>Transmit Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCOMP</name>
<description>Transmit Complete</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ROVR</name>
<description>Receive Overrun</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HRESP</name>
<description>Hresp not OK</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PFR</name>
<description>Pause Frame Received</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PTZ</name>
<description>Pause Time Zero</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>MFD</name>
<description>Management Frame sent</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCOMP</name>
<description>Receive Complete</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXUBR</name>
<description>Receive Used Bit Read</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXUBR</name>
<description>Transmit Used Bit Read</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TUND</name>
<description>Ethernet Transmit Buffer Underrun</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RLE</name>
<description>Retry Limit Exceeded</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXERR</name>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TCOMP</name>
<description>Transmit Complete</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ROVR</name>
<description>Receive Overrun</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>HRESP</name>
<description>Hresp not OK</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PFR</name>
<description>Pause Frame Received</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PTZ</name>
<description>Pause Time Zero</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>MFD</name>
<description>Management Frame sent</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCOMP</name>
<description>Receive Complete</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXUBR</name>
<description>Receive Used Bit Read</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXUBR</name>
<description>Transmit Used Bit Read</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TUND</name>
<description>Ethernet Transmit Buffer Underrun</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RLE</name>
<description>Retry Limit Exceeded</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXERR</name>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TCOMP</name>
<description>Transmit Complete</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ROVR</name>
<description>Receive Overrun</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>HRESP</name>
<description>Hresp not OK</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PFR</name>
<description>Pause Frame Received</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PTZ</name>
<description>Pause Time Zero</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00003FFF</resetValue>
<fields>
<field>
<name>MFD</name>
<description>Management Frame sent</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RCOMP</name>
<description>Receive Complete</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXUBR</name>
<description>Receive Used Bit Read</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXUBR</name>
<description>Transmit Used Bit Read</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TUND</name>
<description>Ethernet Transmit Buffer Underrun</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RLE</name>
<description>Retry Limit Exceeded</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXERR</name>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TCOMP</name>
<description>Transmit Complete</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ROVR</name>
<description>Receive Overrun</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>HRESP</name>
<description>Hresp not OK</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PFR</name>
<description>Pause Frame Received</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PTZ</name>
<description>Pause Time Zero</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MAN</name>
<description>Phy Maintenance Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CODE</name>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REGA</name>
<description>Register Address</description>
<bitOffset>18</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PHYA</name>
<description>PHY Address</description>
<bitOffset>23</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RW</name>
<description>Read-write</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOF</name>
<description>Start of frame</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTR</name>
<description>Pause Time Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PTIME</name>
<description>Pause Time</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PFR</name>
<description>Pause Frames Received Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FROK</name>
<description>Pause Frames received OK</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FTO</name>
<description>Frames Transmitted Ok Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FTOK</name>
<description>Frames Transmitted OK</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SCF</name>
<description>Single Collision Frames Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCF</name>
<description>Single Collision Frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MCF</name>
<description>Multiple Collision Frames Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MCF</name>
<description>Multicollision Frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FRO</name>
<description>Frames Received Ok Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FROK</name>
<description>Frames Received OK</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FCSE</name>
<description>Frame Check Sequence Errors Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FCSE</name>
<description>Frame Check Sequence Errors</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ALE</name>
<description>Alignment Errors Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ALE</name>
<description>Alignment Errors</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DTF</name>
<description>Deferred Transmission Frames Register</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTF</name>
<description>Deferred Transmission Frames</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>LCOL</name>
<description>Late Collisions Register</description>
<addressOffset>0x0000005C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LCOL</name>
<description>Late Collisions</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ECOL</name>
<description>Excessive Collisions Register</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXCOL</name>
<description>Excessive Collisions</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TUND</name>
<description>Transmit Underrun Errors Register</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TUND</name>
<description>Transmit Underruns</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CSE</name>
<description>Carrier Sense Errors Register</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CSE</name>
<description>Carrier Sense Errors</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RRE</name>
<description>Receive Resource Errors Register</description>
<addressOffset>0x0000006C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RRE</name>
<description>Receive Resource Errors</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ROV</name>
<description>Receive Overrun Errors Register</description>
<addressOffset>0x00000070</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ROVR</name>
<description>Receive Overrun</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RSE</name>
<description>Receive Symbol Errors Register</description>
<addressOffset>0x00000074</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RSE</name>
<description>Receive Symbol Errors</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>ELE</name>
<description>Excessive Length Errors Register</description>
<addressOffset>0x00000078</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXL</name>
<description>Excessive Length Errors</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RJA</name>
<description>Receive Jabbers Register</description>
<addressOffset>0x0000007C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RJB</name>
<description>Receive Jabbers</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>USF</name>
<description>Undersize Frames Register</description>
<addressOffset>0x00000080</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>USF</name>
<description>Undersize frames</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>STE</name>
<description>SQE Test Errors Register</description>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SQER</name>
<description>SQE test errors</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RLE</name>
<description>Received Length Field Mismatch Register</description>
<addressOffset>0x00000088</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RLFM</name>
<description>Receive Length Field Mismatch</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>HRB</name>
<description>Hash Register Bottom [31:0] Register</description>
<addressOffset>0x00000090</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>HRT</name>
<description>Hash Register Top [63:32] Register</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SA1B</name>
<description>Specific Address 1 Bottom Register</description>
<addressOffset>0x00000098</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SA1T</name>
<description>Specific Address 1 Top Register</description>
<addressOffset>0x0000009C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SA2B</name>
<description>Specific Address 2 Bottom Register</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SA2T</name>
<description>Specific Address 2 Top Register</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SA3B</name>
<description>Specific Address 3 Bottom Register</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SA3T</name>
<description>Specific Address 3 Top Register</description>
<addressOffset>0x000000AC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SA4B</name>
<description>Specific Address 4 Bottom Register</description>
<addressOffset>0x000000B0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SA4T</name>
<description>Specific Address 4 Top Register</description>
<addressOffset>0x000000B4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TID</name>
<description>Type ID Checking Register</description>
<addressOffset>0x000000B8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TID</name>
<description>Type ID checking</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>USRIO</name>
<description>User Input/Output Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RMII</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CLKEN</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TRNG</name>
<version>6334A</version>
<description>True Random Number Generator</description>
<prependToName>TRNG_</prependToName>
<baseAddress>0xFFFCC000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TRNG</name>
<value>6</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>ENABLE</name>
<description>Enables the TRNG to provide random values</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>DATRDY</name>
<description>Data Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>DATRDY</name>
<description>Data Ready Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATRDY</name>
<description>Data Ready Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATRDY</name>
<description>Data Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ODATA</name>
<description>Output Data Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ODATA</name>
<description>Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>HSMCI1</name>
<version>6449D</version>
<description>High Speed MultiMedia Card Interface 1</description>
<groupName>HSMCI</groupName>
<prependToName>HSMCI1_</prependToName>
<baseAddress>0xFFFD0000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>HSMCI1</name>
<value>29</value>
</interrupt>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>MCIEN</name>
<description>Multi-Media Interface Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MCIDIS</name>
<description>Multi-Media Interface Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PWSEN</name>
<description>Power Save Mode Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PWSDIS</name>
<description>Power Save Mode Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CLKDIV</name>
<description>Clock Divider</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PWSDIV</name>
<description>Power Saving Divider</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RDPROOF</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRPROOF</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FBYTE</name>
<description>Force Byte Transfer</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PADV</name>
<description>Padding Value</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BLKLEN</name>
<description>Data Block Length</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DTOR</name>
<description>Data Timeout Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DTOCYC</name>
<description>Data Timeout Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DTOMUL</name>
<description>Data Timeout Multiplier</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1</name>
<description>DTOCYC</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>DTOCYC x 16</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>DTOCYC x 128</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>DTOCYC x 256</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>DTOCYC x 1024</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>4096</name>
<description>DTOCYC x 4096</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>65536</name>
<description>DTOCYC x 65536</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1048576</name>
<description>DTOCYC x 1048576</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SDCR</name>
<description>SD/SDIO Card Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SDCSEL</name>
<description>SDCard/SDIO Slot</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>SLOTA</name>
<description>Slot A is selected.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SLOTB</name>
<description>-</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SLOTC</name>
<description>-</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SLOTD</name>
<description>-</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SDCBUS</name>
<description>SDCard/SDIO Bus Width</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1</name>
<description>1 bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>4</name>
<description>4 bit</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>8</name>
<description>8 bit</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>ARGR</name>
<description>Argument Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ARG</name>
<description>Command Argument</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CMDR</name>
<description>Command Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CMDNB</name>
<description>Command Number</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSPTYP</name>
<description>Response Type</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NORESP</name>
<description>No response.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>48_BIT</name>
<description>48-bit response.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>136_BIT</name>
<description>136-bit response.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>R1B</name>
<description>R1b response type</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SPCMD</name>
<description>Special Command</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>STD</name>
<description>Not a special CMD.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>INIT</name>
<description>Initialization CMD:74 clock cycles for initialization sequence.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SYNC</name>
<description>Synchronized CMD:Wait for the end of the current data block transfer before sending the pending command.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CE_ATA</name>
<description>CE-ATA Completion Signal disable Command.The host cancels the ability for the device to return a command completion signal on the command line.</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>IT_CMD</name>
<description>Interrupt command:Corresponds to the Interrupt Mode (CMD40).</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>IT_RESP</name>
<description>Interrupt response:Corresponds to the Interrupt Mode (CMD40).</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>BOR</name>
<description>Boot Operation Request.Start a boot operation mode, the host processor can read boot data from the MMC device directly.</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>EBO</name>
<description>End Boot Operation.This command allows the host processor to terminate the boot operation mode.</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>OPDCMD</name>
<description>Open Drain Command</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>PUSHPULL</name>
<description>Push pull command.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>OPENDRAIN</name>
<description>Open drain command.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MAXLAT</name>
<description>Max Latency for Command to Response</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>5</name>
<description>5-cycle max latency.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64-cycle max latency.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRCMD</name>
<description>Transfer Command</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NO_DATA</name>
<description>No data transfer</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>START_DATA</name>
<description>Start data transfer</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP_DATA</name>
<description>Stop data transfer</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRDIR</name>
<description>Transfer Direction</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>WRITE</name>
<description>Write.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>READ</name>
<description>Read.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRTYP</name>
<description>Transfer Type</description>
<bitOffset>19</bitOffset>
<bitWidth>3</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>SINGLE</name>
<description>MMC/SDCard Single Block</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MULTIPLE</name>
<description>MMC/SDCard Multiple Block</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STREAM</name>
<description>MMC Stream</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BYTE</name>
<description>SDIO Byte</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>BLOCK</name>
<description>SDIO Block</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IOSPCMD</name>
<description>SDIO Special Command</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>STD</name>
<description>Not an SDIO Special Command</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SUSPEND</name>
<description>SDIO Suspend Command</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESUME</name>
<description>SDIO Resume Command</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ATACS</name>
<description>ATA with Command Completion Signal</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal operation mode.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>COMPLETION</name>
<description>This bit indicates that a completion signal is expected within a programmed amount of time (HSMCI_CSTOR).</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BOOT_ACK</name>
<description>Boot Operation Acknowledge.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BLKR</name>
<description>Block Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BCNT</name>
<description>MMC/SDIO Block Count - SDIO Byte Count</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MULTIPLE</name>
<description>MMC/SDCARD Multiple BlockFrom 1 to 65635: Value 0 corresponds to an infinite block transfer.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>BYTE</name>
<description>SDIO ByteFrom 1 to 512 bytes: Value 0 corresponds to a 512-byte transfer.Values from 0x200 to 0xFFFF are forbidden.</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>BLOCK</name>
<description>SDIO BlockFrom 1 to 511 blocks: Value 0 corresponds to an infinite block transfer.Values from 0x200 to 0xFFFF are forbidden.</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BLKLEN</name>
<description>Data Block Length</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CSTOR</name>
<description>Completion Signal Timeout Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CSTOCYC</name>
<description>Completion Signal Timeout Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CSTOMUL</name>
<description>Completion Signal Timeout Multiplier</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1</name>
<description>CSTOCYC x 1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>CSTOCYC x 16</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>CSTOCYC x 128</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>CSTOCYC x 256</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>CSTOCYC x 1024</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>4096</name>
<description>CSTOCYC x 4096</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>65536</name>
<description>CSTOCYC x 65536</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1048576</name>
<description>CSTOCYC x 1048576</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>RSPR[%s]</name>
<description>Response Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RSP</name>
<description>Response</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RDR</name>
<description>Receive Data Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data to Read</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>TDR</name>
<description>Transmit Data Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>DATA</name>
<description>Data to Write</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0000C0E5</resetValue>
<fields>
<field>
<name>CMDRDY</name>
<description>Command Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Ready</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BLKE</name>
<description>Data Block Ended</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DTIP</name>
<description>Data Transfer in Progress</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NOTBUSY</name>
<description>HSMCI Not Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MCI_SDIOIRQA</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SDIOWAIT</name>
<description>SDIO Read Wait Operation Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSRCV</name>
<description>CE-ATA Completion Signal Received</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RINDE</name>
<description>Response Index Error</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RDIRE</name>
<description>Response Direction Error</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RCRCE</name>
<description>Response CRC Error</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RENDE</name>
<description>Response End Bit Error</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RTOE</name>
<description>Response Time-out Error</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DCRCE</name>
<description>Data CRC Error</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DTOE</name>
<description>Data Time-out Error</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSTOE</name>
<description>Completion Signal Time-out Error</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BLKOVRE</name>
<description>DMA Block Overrun Error</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMADONE</name>
<description>DMA Transfer done</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FIFOEMPTY</name>
<description>FIFO empty flag</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>XFRDONE</name>
<description>Transfer Done flag</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ACKRCV</name>
<description>Boot Operation Acknowledge Received</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ACKRCVE</name>
<description>Boot Operation Acknowledge Error</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CMDRDY</name>
<description>Command Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receiver Ready Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BLKE</name>
<description>Data Block Ended Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTIP</name>
<description>Data Transfer in Progress Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NOTBUSY</name>
<description>Data Not Busy Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MCI_SDIOIRQA</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SDIOWAIT</name>
<description>SDIO Read Wait Operation Status Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSRCV</name>
<description>Completion Signal Received Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RINDE</name>
<description>Response Index Error Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RDIRE</name>
<description>Response Direction Error Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCRCE</name>
<description>Response CRC Error Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RENDE</name>
<description>Response End Bit Error Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTOE</name>
<description>Response Time-out Error Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DCRCE</name>
<description>Data CRC Error Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTOE</name>
<description>Data Time-out Error Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSTOE</name>
<description>Completion Signal Timeout Error Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BLKOVRE</name>
<description>DMA Block Overrun Error Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DMADONE</name>
<description>DMA Transfer completed Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FIFOEMPTY</name>
<description>FIFO empty Interrupt enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>XFRDONE</name>
<description>Transfer Done Interrupt enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKRCV</name>
<description>Boot Acknowledge Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKRCVE</name>
<description>Boot Acknowledge Error Interrupt Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Interrupt Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CMDRDY</name>
<description>Command Ready Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receiver Ready Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BLKE</name>
<description>Data Block Ended Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTIP</name>
<description>Data Transfer in Progress Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>NOTBUSY</name>
<description>Data Not Busy Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MCI_SDIOIRQA</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SDIOWAIT</name>
<description>SDIO Read Wait Operation Status Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSRCV</name>
<description>Completion Signal received interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RINDE</name>
<description>Response Index Error Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RDIRE</name>
<description>Response Direction Error Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RCRCE</name>
<description>Response CRC Error Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RENDE</name>
<description>Response End Bit Error Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTOE</name>
<description>Response Time-out Error Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DCRCE</name>
<description>Data CRC Error Interrupt Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTOE</name>
<description>Data Time-out Error Interrupt Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CSTOE</name>
<description>Completion Signal Time out Error Interrupt Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BLKOVRE</name>
<description>DMA Block Overrun Error Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DMADONE</name>
<description>DMA Transfer completed Interrupt Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FIFOEMPTY</name>
<description>FIFO empty Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>XFRDONE</name>
<description>Transfer Done Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKRCV</name>
<description>Boot Acknowledge Interrupt Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKRCVE</name>
<description>Boot Acknowledge Error Interrupt Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Interrupt Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMDRDY</name>
<description>Command Ready Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXRDY</name>
<description>Receiver Ready Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmit Ready Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BLKE</name>
<description>Data Block Ended Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DTIP</name>
<description>Data Transfer in Progress Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NOTBUSY</name>
<description>Data Not Busy Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MCI_SDIOIRQA</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SDIOWAIT</name>
<description>SDIO Read Wait Operation Status Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSRCV</name>
<description>Completion Signal Received Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RINDE</name>
<description>Response Index Error Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RDIRE</name>
<description>Response Direction Error Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RCRCE</name>
<description>Response CRC Error Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RENDE</name>
<description>Response End Bit Error Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RTOE</name>
<description>Response Time-out Error Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DCRCE</name>
<description>Data CRC Error Interrupt Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DTOE</name>
<description>Data Time-out Error Interrupt Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CSTOE</name>
<description>Completion Signal Time-out Error Interrupt Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BLKOVRE</name>
<description>DMA Block Overrun Error Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DMADONE</name>
<description>DMA Transfer Completed Interrupt Mask</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FIFOEMPTY</name>
<description>FIFO Empty Interrupt Mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>XFRDONE</name>
<description>Transfer Done Interrupt Mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ACKRCV</name>
<description>Boot Operation Acknowledge Received Interrupt Mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ACKRCVE</name>
<description>Boot Operation Acknowledge Error Interrupt Mask</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Interrupt Mask</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UNRE</name>
<description>Underrun Interrupt Mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DMA</name>
<description>DMA Configuration Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OFFSET</name>
<description>DMA Write Buffer Offset</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHKSIZE</name>
<description>DMA Channel Read and Write Chunk Size</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>1</name>
<description>1 data available</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>4</name>
<description>4 data available</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>8</name>
<description>8 data available</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 data available</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DMAEN</name>
<description>DMA Hardware Handshaking Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ROPT</name>
<description>Read Optimization with padding</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CFG</name>
<description>Configuration Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FIFOMODE</name>
<description>HSMCI Internal FIFO control mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FERRCTRL</name>
<description>Flow Error flag reset control mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HSMODE</name>
<description>High Speed Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LSYNC</name>
<description>Synchronize on the last block</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protection Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>WP_EN</name>
<description>Write Protection Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WP_KEY</name>
<description>Write Protection Key password</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protection Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>WP_VS</name>
<description>Write Protection Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>No Write Protection Violation occurred since the last read of this register (WP_SR)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WRITE</name>
<description>Write Protection detected unauthorized attempt to write a control register had occurred (since the last read.)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESET</name>
<description>Software reset had been performed while Write Protection was enabled (since the last read).</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both Write Protection violation and software reset with Write Protection enabled have occurred since the last read.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WP_VSRC</name>
<description>Write Protection Violation SouRCe</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TC1</name>
<version>6082J</version>
<description>Timer Counter 1</description>
<groupName>TC</groupName>
<prependToName>TC1_</prependToName>
<baseAddress>0xFFFD4000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4000</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CCR0</name>
<description>Channel Control Register (channel = 0)</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CLKEN</name>
<description>Counter Clock Enable Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CLKDIS</name>
<description>Counter Clock Disable Command</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWTRG</name>
<description>Software Trigger Command</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR0</name>
<description>Channel Mode Register (channel = 0)</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDBSTOP</name>
<description>Counter Clock Stopped with RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDBDIS</name>
<description>Counter Clock Disable with RB Loading</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ETRGEDG</name>
<description>External Trigger Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ABETRG</name>
<description>TIOA or TIOB External Trigger Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCTRG</name>
<description>RC Compare Trigger Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVE</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDRA</name>
<description>RA Loading Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDRB</name>
<description>RB Loading Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CMR0_WAVE_EQ_1</name>
<description>Channel Mode Register (channel = 0)</description>
<alternateGroup>WAVE_EQ_1</alternateGroup>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPCSTOP</name>
<description>Counter Clock Stopped with RC Compare</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCDIS</name>
<description>Counter Clock Disable with RC Compare</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EEVTEDG</name>
<description>External Event Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EEVT</name>
<description>External Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIOB</name>
<description>TIOB</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ENETRG</name>
<description>External Event Trigger Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVSEL</name>
<description>Waveform Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>UP</name>
<description>UP mode without automatic trigger on RC Compare</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>UP_RC</name>
<description>UP mode with automatic trigger on RC Compare</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN</name>
<description>UPDOWN mode without automatic trigger on RC Compare</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN_RC</name>
<description>UPDOWN mode with automatic trigger on RC Compare</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAVE</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACPA</name>
<description>RA Compare Effect on TIOA</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACPC</name>
<description>RC Compare Effect on TIOA</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AEEVT</name>
<description>External Event Effect on TIOA</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASWTRG</name>
<description>Software Trigger Effect on TIOA</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPB</name>
<description>RB Compare Effect on TIOB</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPC</name>
<description>RC Compare Effect on TIOB</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BEEVT</name>
<description>External Event Effect on TIOB</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BSWTRG</name>
<description>Software Trigger Effect on TIOB</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CV0</name>
<description>Counter Value (channel = 0)</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RA0</name>
<description>Register A (channel = 0)</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RA</name>
<description>Register A</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RB0</name>
<description>Register B (channel = 0)</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RB</name>
<description>Register B</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC0</name>
<description>Register C (channel = 0)</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RC</name>
<description>Register C</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR0</name>
<description>Status Register (channel = 0)</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLKSTA</name>
<description>Clock Enabling Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOA</name>
<description>TIOA Mirror</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOB</name>
<description>TIOB Mirror</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER0</name>
<description>Interrupt Enable Register (channel = 0)</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR0</name>
<description>Interrupt Disable Register (channel = 0)</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR0</name>
<description>Interrupt Mask Register (channel = 0)</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CCR1</name>
<description>Channel Control Register (channel = 1)</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CLKEN</name>
<description>Counter Clock Enable Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CLKDIS</name>
<description>Counter Clock Disable Command</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWTRG</name>
<description>Software Trigger Command</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR1</name>
<description>Channel Mode Register (channel = 1)</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDBSTOP</name>
<description>Counter Clock Stopped with RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDBDIS</name>
<description>Counter Clock Disable with RB Loading</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ETRGEDG</name>
<description>External Trigger Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ABETRG</name>
<description>TIOA or TIOB External Trigger Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCTRG</name>
<description>RC Compare Trigger Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVE</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDRA</name>
<description>RA Loading Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDRB</name>
<description>RB Loading Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CMR1_WAVE_EQ_1</name>
<description>Channel Mode Register (channel = 1)</description>
<alternateGroup>WAVE_EQ_1</alternateGroup>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPCSTOP</name>
<description>Counter Clock Stopped with RC Compare</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCDIS</name>
<description>Counter Clock Disable with RC Compare</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EEVTEDG</name>
<description>External Event Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EEVT</name>
<description>External Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIOB</name>
<description>TIOB</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ENETRG</name>
<description>External Event Trigger Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVSEL</name>
<description>Waveform Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>UP</name>
<description>UP mode without automatic trigger on RC Compare</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>UP_RC</name>
<description>UP mode with automatic trigger on RC Compare</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN</name>
<description>UPDOWN mode without automatic trigger on RC Compare</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN_RC</name>
<description>UPDOWN mode with automatic trigger on RC Compare</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAVE</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACPA</name>
<description>RA Compare Effect on TIOA</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACPC</name>
<description>RC Compare Effect on TIOA</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AEEVT</name>
<description>External Event Effect on TIOA</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASWTRG</name>
<description>Software Trigger Effect on TIOA</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPB</name>
<description>RB Compare Effect on TIOB</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPC</name>
<description>RC Compare Effect on TIOB</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BEEVT</name>
<description>External Event Effect on TIOB</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BSWTRG</name>
<description>Software Trigger Effect on TIOB</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CV1</name>
<description>Counter Value (channel = 1)</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RA1</name>
<description>Register A (channel = 1)</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RA</name>
<description>Register A</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RB1</name>
<description>Register B (channel = 1)</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RB</name>
<description>Register B</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC1</name>
<description>Register C (channel = 1)</description>
<addressOffset>0x0000005C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RC</name>
<description>Register C</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR1</name>
<description>Status Register (channel = 1)</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLKSTA</name>
<description>Clock Enabling Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOA</name>
<description>TIOA Mirror</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOB</name>
<description>TIOB Mirror</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER1</name>
<description>Interrupt Enable Register (channel = 1)</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR1</name>
<description>Interrupt Disable Register (channel = 1)</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR1</name>
<description>Interrupt Mask Register (channel = 1)</description>
<addressOffset>0x0000006C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CCR2</name>
<description>Channel Control Register (channel = 2)</description>
<addressOffset>0x00000080</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CLKEN</name>
<description>Counter Clock Enable Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CLKDIS</name>
<description>Counter Clock Disable Command</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SWTRG</name>
<description>Software Trigger Command</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CMR2</name>
<description>Channel Mode Register (channel = 2)</description>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDBSTOP</name>
<description>Counter Clock Stopped with RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDBDIS</name>
<description>Counter Clock Disable with RB Loading</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ETRGEDG</name>
<description>External Trigger Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ABETRG</name>
<description>TIOA or TIOB External Trigger Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCTRG</name>
<description>RC Compare Trigger Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVE</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LDRA</name>
<description>RA Loading Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LDRB</name>
<description>RB Loading Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge of TIOA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge of TIOA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge of TIOA</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CMR2_WAVE_EQ_1</name>
<description>Channel Mode Register (channel = 2)</description>
<alternateGroup>WAVE_EQ_1</alternateGroup>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCCLKS</name>
<description>Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIMER_CLOCK1</name>
<description>Clock selected: TCLK1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK2</name>
<description>Clock selected: TCLK2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK3</name>
<description>Clock selected: TCLK3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK4</name>
<description>Clock selected: TCLK4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>TIMER_CLOCK5</name>
<description>Clock selected: TCLK5</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>Clock selected: XC0</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>Clock selected: XC1</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>Clock selected: XC2</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKI</name>
<description>Clock Invert</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BURST</name>
<description>Burst Signal Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>The clock is not gated by an external signal.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0 is ANDed with the selected clock.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1 is ANDed with the selected clock.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2 is ANDed with the selected clock.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPCSTOP</name>
<description>Counter Clock Stopped with RC Compare</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPCDIS</name>
<description>Counter Clock Disable with RC Compare</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EEVTEDG</name>
<description>External Event Edge Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Rising edge</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Falling edge</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EDGE</name>
<description>Each edge</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EEVT</name>
<description>External Event Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TIOB</name>
<description>TIOB</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XC0</name>
<description>XC0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XC1</name>
<description>XC1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XC2</name>
<description>XC2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ENETRG</name>
<description>External Event Trigger Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WAVSEL</name>
<description>Waveform Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>UP</name>
<description>UP mode without automatic trigger on RC Compare</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>UP_RC</name>
<description>UP mode with automatic trigger on RC Compare</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN</name>
<description>UPDOWN mode without automatic trigger on RC Compare</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDOWN_RC</name>
<description>UPDOWN mode with automatic trigger on RC Compare</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAVE</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACPA</name>
<description>RA Compare Effect on TIOA</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACPC</name>
<description>RC Compare Effect on TIOA</description>
<bitOffset>18</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AEEVT</name>
<description>External Event Effect on TIOA</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASWTRG</name>
<description>Software Trigger Effect on TIOA</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPB</name>
<description>RB Compare Effect on TIOB</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCPC</name>
<description>RC Compare Effect on TIOB</description>
<bitOffset>26</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BEEVT</name>
<description>External Event Effect on TIOB</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BSWTRG</name>
<description>Software Trigger Effect on TIOB</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>NONE</name>
<description>None</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TOGGLE</name>
<description>Toggle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CV2</name>
<description>Counter Value (channel = 2)</description>
<addressOffset>0x00000090</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CV</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RA2</name>
<description>Register A (channel = 2)</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RA</name>
<description>Register A</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RB2</name>
<description>Register B (channel = 2)</description>
<addressOffset>0x00000098</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RB</name>
<description>Register B</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RC2</name>
<description>Register C (channel = 2)</description>
<addressOffset>0x0000009C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RC</name>
<description>Register C</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR2</name>
<description>Status Register (channel = 2)</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLKSTA</name>
<description>Clock Enabling Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOA</name>
<description>TIOA Mirror</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MTIOB</name>
<description>TIOB Mirror</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER2</name>
<description>Interrupt Enable Register (channel = 2)</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR2</name>
<description>Interrupt Disable Register (channel = 2)</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR2</name>
<description>Interrupt Mask Register (channel = 2)</description>
<addressOffset>0x000000AC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COVFS</name>
<description>Counter Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOVRS</name>
<description>Load Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPAS</name>
<description>RA Compare</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPBS</name>
<description>RB Compare</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CPCS</name>
<description>RC Compare</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRAS</name>
<description>RA Loading</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LDRBS</name>
<description>RB Loading</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ETRGS</name>
<description>External Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>BCR</name>
<description>Block Control Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SYNC</name>
<description>Synchro Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BMR</name>
<description>Block Mode Register</description>
<addressOffset>0x000000C4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TC0XC0S</name>
<description>External Clock Signal 0 Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TCLK0</name>
<description>Signal connected to XC0: TCLK0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TCLK1</name>
<description>Signal connected to XC0: TCLK1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TCLK2</name>
<description>Signal connected to XC0: TCLK2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TC1XC1S</name>
<description>External Clock Signal 1 Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TCLK0</name>
<description>Signal connected to XC1: TCLK0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TCLK1</name>
<description>Signal connected to XC1: TCLK1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TCLK2</name>
<description>Signal connected to XC1: TCLK2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TC2XC2S</name>
<description>External Clock Signal 2 Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>TCLK0</name>
<description>Signal connected to XC2: TCLK0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TCLK1</name>
<description>Signal connected to XC2: TCLK1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TCLK2</name>
<description>Signal connected to XC2: TCLK2</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DDRSDRC1</name>
<version>6304S</version>
<description>DDR_SDR SDRAM Controller 1</description>
<groupName>EBI</groupName>
<prependToName>DDRSDRC1_</prependToName>
<baseAddress>0xFFFFE400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>MR</name>
<description>DDRSDRC Mode Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MODE</name>
<description>DDRSDRC Command Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RTR</name>
<description>DDRSDRC Refresh Timer Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>DDRSDRC Refresh Timer Count</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CR</name>
<description>DDRSDRC Configuration Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00007024</resetValue>
<fields>
<field>
<name>NC</name>
<description>Number of Column Bits</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NR</name>
<description>Number of Row Bits</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CAS</name>
<description>CAS Latency</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLL</name>
<description>Reset DLL</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIC</name>
<description>Output Driver Impedance Control</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIS_DLL</name>
<description>Disable DLL</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OCD</name>
<description>Off-chip Driver</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EBISHARE</name>
<description>External Bus Interface is Shared</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACTBST</name>
<description>ACTIVE Bank X to Burst Stop Read Access Bank Y</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR0</name>
<description>DDRSDRC Timing Parameter 0 Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x20227225</resetValue>
<fields>
<field>
<name>TRAS</name>
<description>Active to Precharge Delay</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRCD</name>
<description>Row to Column Delay</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TWR</name>
<description>Write Recovery Delay</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRC</name>
<description>Row Cycle Delay</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRP</name>
<description>Row Precharge Delay</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRRD</name>
<description>Active bankA to Active bankB</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TWTR</name>
<description>Internal Write to Read Delay</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REDUCE_WRRD</name>
<description>Reduce Write to Read Delay</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TMRD</name>
<description>Load Mode Register Command to Active or Refresh Command</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR1</name>
<description>DDRSDRC Timing Parameter 1 Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x03C80808</resetValue>
<fields>
<field>
<name>TRFC</name>
<description>Row Cycle Delay</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXSNR</name>
<description>Exit Self Refresh Delay to Non-read Command</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXSRD</name>
<description>ExiT Self Refresh Delay to Read Command</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXP</name>
<description>Exit Power-down Delay to First Command</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR2</name>
<description>DDRSDRC Timing Parameter 2 Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00002062</resetValue>
<fields>
<field>
<name>TXARD</name>
<description>Exit Active Power Down Delay to Read Command in Mode "Fast Exit".</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXARDS</name>
<description>Exit Active Power Down Delay to Read Command in Mode "Slow Exit".</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRPA</name>
<description>Row Precharge All Delay</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRTP</name>
<description>Read to Precharge</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>LPR</name>
<description>DDRSDRC Low-power Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00010000</resetValue>
<fields>
<field>
<name>LPCB</name>
<description>Low-power Command Bit</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CLK_FR</name>
<description>Clock Frozen Command Bit</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PASR</name>
<description>Partial Array Self Refresh</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCR</name>
<description>Temperature Compensated Self Refresh</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DS</name>
<description>Drive Strength</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Low Power Mode</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>APDE</name>
<description>Active Power Down Exit Time</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UPD_MR</name>
<description>Update Load Mode Register and Extended Mode Register</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MD</name>
<description>DDRSDRC Memory Device Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000010</resetValue>
<fields>
<field>
<name>MD</name>
<description>Memory Device</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DBW</name>
<description>Data Bus Width</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DLL</name>
<description>DDRSDRC DLL Information Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>MDINC</name>
<description>DLL Master Delay Increment</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MDDEC</name>
<description>DLL Master Delay Decrement</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MDOVF</name>
<description>DLL Master Delay Overflow Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MDVAL</name>
<description>DLL Master Delay Value</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>HS</name>
<description>DDRSDRC High Speed Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIS_ANTICIP_READ</name>
<description>Anticip Read Access</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>DELAY[%s]</name>
<description>DDRSDRC Delay I/O Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>DELAY1</name>
<description>Delay1..Delay8</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY2</name>
<description>Delay1..Delay8</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY3</name>
<description>Delay1..Delay8</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY4</name>
<description>Delay1..Delay8</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY5</name>
<description>Delay1..Delay8</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY6</name>
<description>Delay1..Delay8</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY7</name>
<description>Delay1..Delay8</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY8</name>
<description>Delay1..Delay8</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>DDRSDRC Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>DDRSDRC Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DDRSDRC0</name>
<version>6304S</version>
<description>DDR_SDR SDRAM Controller 0</description>
<groupName>DDRSDRC</groupName>
<prependToName>DDRSDRC0_</prependToName>
<baseAddress>0xFFFFE600</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>MR</name>
<description>DDRSDRC Mode Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MODE</name>
<description>DDRSDRC Command Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RTR</name>
<description>DDRSDRC Refresh Timer Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>DDRSDRC Refresh Timer Count</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CR</name>
<description>DDRSDRC Configuration Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00007024</resetValue>
<fields>
<field>
<name>NC</name>
<description>Number of Column Bits</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NR</name>
<description>Number of Row Bits</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CAS</name>
<description>CAS Latency</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLL</name>
<description>Reset DLL</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIC</name>
<description>Output Driver Impedance Control</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DIS_DLL</name>
<description>Disable DLL</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OCD</name>
<description>Off-chip Driver</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EBISHARE</name>
<description>External Bus Interface is Shared</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ACTBST</name>
<description>ACTIVE Bank X to Burst Stop Read Access Bank Y</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR0</name>
<description>DDRSDRC Timing Parameter 0 Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x20227225</resetValue>
<fields>
<field>
<name>TRAS</name>
<description>Active to Precharge Delay</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRCD</name>
<description>Row to Column Delay</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TWR</name>
<description>Write Recovery Delay</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRC</name>
<description>Row Cycle Delay</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRP</name>
<description>Row Precharge Delay</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRRD</name>
<description>Active bankA to Active bankB</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TWTR</name>
<description>Internal Write to Read Delay</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>REDUCE_WRRD</name>
<description>Reduce Write to Read Delay</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TMRD</name>
<description>Load Mode Register Command to Active or Refresh Command</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR1</name>
<description>DDRSDRC Timing Parameter 1 Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x03C80808</resetValue>
<fields>
<field>
<name>TRFC</name>
<description>Row Cycle Delay</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXSNR</name>
<description>Exit Self Refresh Delay to Non-read Command</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXSRD</name>
<description>ExiT Self Refresh Delay to Read Command</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXP</name>
<description>Exit Power-down Delay to First Command</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR2</name>
<description>DDRSDRC Timing Parameter 2 Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00002062</resetValue>
<fields>
<field>
<name>TXARD</name>
<description>Exit Active Power Down Delay to Read Command in Mode "Fast Exit".</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TXARDS</name>
<description>Exit Active Power Down Delay to Read Command in Mode "Slow Exit".</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRPA</name>
<description>Row Precharge All Delay</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TRTP</name>
<description>Read to Precharge</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>LPR</name>
<description>DDRSDRC Low-power Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00010000</resetValue>
<fields>
<field>
<name>LPCB</name>
<description>Low-power Command Bit</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CLK_FR</name>
<description>Clock Frozen Command Bit</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PASR</name>
<description>Partial Array Self Refresh</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TCR</name>
<description>Temperature Compensated Self Refresh</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DS</name>
<description>Drive Strength</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TIMEOUT</name>
<description>Low Power Mode</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>APDE</name>
<description>Active Power Down Exit Time</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UPD_MR</name>
<description>Update Load Mode Register and Extended Mode Register</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MD</name>
<description>DDRSDRC Memory Device Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000010</resetValue>
<fields>
<field>
<name>MD</name>
<description>Memory Device</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DBW</name>
<description>Data Bus Width</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DLL</name>
<description>DDRSDRC DLL Information Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>MDINC</name>
<description>DLL Master Delay Increment</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MDDEC</name>
<description>DLL Master Delay Decrement</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MDOVF</name>
<description>DLL Master Delay Overflow Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MDVAL</name>
<description>DLL Master Delay Value</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>HS</name>
<description>DDRSDRC High Speed Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIS_ANTICIP_READ</name>
<description>Anticip Read Access</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>DELAY[%s]</name>
<description>DDRSDRC Delay I/O Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>DELAY1</name>
<description>Delay1..Delay8</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY2</name>
<description>Delay1..Delay8</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY3</name>
<description>Delay1..Delay8</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY4</name>
<description>Delay1..Delay8</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY5</name>
<description>Delay1..Delay8</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY6</name>
<description>Delay1..Delay8</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY7</name>
<description>Delay1..Delay8</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DELAY8</name>
<description>Delay1..Delay8</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>DDRSDRC Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>DDRSDRC Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SMC</name>
<version>6105J</version>
<description>Static Memory Controller</description>
<groupName>EBI</groupName>
<prependToName>SMC_</prependToName>
<baseAddress>0xFFFFE800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>SETUP0</name>
<description>SMC Setup Register (CS_number = 0)</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_SETUP</name>
<description>NWE Setup Length</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_SETUP</name>
<description>NCS Setup Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_SETUP</name>
<description>NRD Setup Length</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_SETUP</name>
<description>NCS Setup Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PULSE0</name>
<description>SMC Pulse Register (CS_number = 0)</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_PULSE</name>
<description>NWE Pulse Length</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_PULSE</name>
<description>NCS Pulse Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_PULSE</name>
<description>NRD Pulse Length</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_PULSE</name>
<description>NCS Pulse Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CYCLE0</name>
<description>SMC Cycle Register (CS_number = 0)</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00030003</resetValue>
<fields>
<field>
<name>NWE_CYCLE</name>
<description>Total Write Cycle Length</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_CYCLE</name>
<description>Total Read Cycle Length</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MODE0</name>
<description>SMC Mode Register (CS_number = 0)</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x10001000</resetValue>
<fields>
<field>
<name>READ_MODE</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRITE_MODE</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EXNW_MODE</name>
<description>NWAIT Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BAT</name>
<description>Byte Access Type</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DBW</name>
<description>Data Bus Width</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_CYCLES</name>
<description>Data Float Time</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_MODE</name>
<description>TDF Optimization</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PMEN</name>
<description>Page Mode Enabled</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PS</name>
<description>Page Size</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SETUP1</name>
<description>SMC Setup Register (CS_number = 1)</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_SETUP</name>
<description>NWE Setup Length</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_SETUP</name>
<description>NCS Setup Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_SETUP</name>
<description>NRD Setup Length</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_SETUP</name>
<description>NCS Setup Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PULSE1</name>
<description>SMC Pulse Register (CS_number = 1)</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_PULSE</name>
<description>NWE Pulse Length</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_PULSE</name>
<description>NCS Pulse Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_PULSE</name>
<description>NRD Pulse Length</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_PULSE</name>
<description>NCS Pulse Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CYCLE1</name>
<description>SMC Cycle Register (CS_number = 1)</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00030003</resetValue>
<fields>
<field>
<name>NWE_CYCLE</name>
<description>Total Write Cycle Length</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_CYCLE</name>
<description>Total Read Cycle Length</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MODE1</name>
<description>SMC Mode Register (CS_number = 1)</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x10001000</resetValue>
<fields>
<field>
<name>READ_MODE</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRITE_MODE</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EXNW_MODE</name>
<description>NWAIT Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BAT</name>
<description>Byte Access Type</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DBW</name>
<description>Data Bus Width</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_CYCLES</name>
<description>Data Float Time</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_MODE</name>
<description>TDF Optimization</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PMEN</name>
<description>Page Mode Enabled</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PS</name>
<description>Page Size</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SETUP2</name>
<description>SMC Setup Register (CS_number = 2)</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_SETUP</name>
<description>NWE Setup Length</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_SETUP</name>
<description>NCS Setup Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_SETUP</name>
<description>NRD Setup Length</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_SETUP</name>
<description>NCS Setup Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PULSE2</name>
<description>SMC Pulse Register (CS_number = 2)</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_PULSE</name>
<description>NWE Pulse Length</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_PULSE</name>
<description>NCS Pulse Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_PULSE</name>
<description>NRD Pulse Length</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_PULSE</name>
<description>NCS Pulse Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CYCLE2</name>
<description>SMC Cycle Register (CS_number = 2)</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00030003</resetValue>
<fields>
<field>
<name>NWE_CYCLE</name>
<description>Total Write Cycle Length</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_CYCLE</name>
<description>Total Read Cycle Length</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MODE2</name>
<description>SMC Mode Register (CS_number = 2)</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x10001000</resetValue>
<fields>
<field>
<name>READ_MODE</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRITE_MODE</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EXNW_MODE</name>
<description>NWAIT Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BAT</name>
<description>Byte Access Type</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DBW</name>
<description>Data Bus Width</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_CYCLES</name>
<description>Data Float Time</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_MODE</name>
<description>TDF Optimization</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PMEN</name>
<description>Page Mode Enabled</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PS</name>
<description>Page Size</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SETUP3</name>
<description>SMC Setup Register (CS_number = 3)</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_SETUP</name>
<description>NWE Setup Length</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_SETUP</name>
<description>NCS Setup Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_SETUP</name>
<description>NRD Setup Length</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_SETUP</name>
<description>NCS Setup Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PULSE3</name>
<description>SMC Pulse Register (CS_number = 3)</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_PULSE</name>
<description>NWE Pulse Length</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_PULSE</name>
<description>NCS Pulse Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_PULSE</name>
<description>NRD Pulse Length</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_PULSE</name>
<description>NCS Pulse Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CYCLE3</name>
<description>SMC Cycle Register (CS_number = 3)</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00030003</resetValue>
<fields>
<field>
<name>NWE_CYCLE</name>
<description>Total Write Cycle Length</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_CYCLE</name>
<description>Total Read Cycle Length</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MODE3</name>
<description>SMC Mode Register (CS_number = 3)</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x10001000</resetValue>
<fields>
<field>
<name>READ_MODE</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRITE_MODE</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EXNW_MODE</name>
<description>NWAIT Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BAT</name>
<description>Byte Access Type</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DBW</name>
<description>Data Bus Width</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_CYCLES</name>
<description>Data Float Time</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_MODE</name>
<description>TDF Optimization</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PMEN</name>
<description>Page Mode Enabled</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PS</name>
<description>Page Size</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SETUP4</name>
<description>SMC Setup Register (CS_number = 4)</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_SETUP</name>
<description>NWE Setup Length</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_SETUP</name>
<description>NCS Setup Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_SETUP</name>
<description>NRD Setup Length</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_SETUP</name>
<description>NCS Setup Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PULSE4</name>
<description>SMC Pulse Register (CS_number = 4)</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_PULSE</name>
<description>NWE Pulse Length</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_PULSE</name>
<description>NCS Pulse Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_PULSE</name>
<description>NRD Pulse Length</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_PULSE</name>
<description>NCS Pulse Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CYCLE4</name>
<description>SMC Cycle Register (CS_number = 4)</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00030003</resetValue>
<fields>
<field>
<name>NWE_CYCLE</name>
<description>Total Write Cycle Length</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_CYCLE</name>
<description>Total Read Cycle Length</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MODE4</name>
<description>SMC Mode Register (CS_number = 4)</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x10001000</resetValue>
<fields>
<field>
<name>READ_MODE</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRITE_MODE</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EXNW_MODE</name>
<description>NWAIT Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BAT</name>
<description>Byte Access Type</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DBW</name>
<description>Data Bus Width</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_CYCLES</name>
<description>Data Float Time</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_MODE</name>
<description>TDF Optimization</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PMEN</name>
<description>Page Mode Enabled</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PS</name>
<description>Page Size</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SETUP5</name>
<description>SMC Setup Register (CS_number = 5)</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_SETUP</name>
<description>NWE Setup Length</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_SETUP</name>
<description>NCS Setup Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_SETUP</name>
<description>NRD Setup Length</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_SETUP</name>
<description>NCS Setup Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PULSE5</name>
<description>SMC Pulse Register (CS_number = 5)</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010101</resetValue>
<fields>
<field>
<name>NWE_PULSE</name>
<description>NWE Pulse Length</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_WR_PULSE</name>
<description>NCS Pulse Length in WRITE Access</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_PULSE</name>
<description>NRD Pulse Length</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NCS_RD_PULSE</name>
<description>NCS Pulse Length in READ Access</description>
<bitOffset>24</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CYCLE5</name>
<description>SMC Cycle Register (CS_number = 5)</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00030003</resetValue>
<fields>
<field>
<name>NWE_CYCLE</name>
<description>Total Write Cycle Length</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
<field>
<name>NRD_CYCLE</name>
<description>Total Read Cycle Length</description>
<bitOffset>16</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MODE5</name>
<description>SMC Mode Register (CS_number = 5)</description>
<addressOffset>0x0000005C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x10001000</resetValue>
<fields>
<field>
<name>READ_MODE</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WRITE_MODE</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>EXNW_MODE</name>
<description>NWAIT Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BAT</name>
<description>Byte Access Type</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DBW</name>
<description>Data Bus Width</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_CYCLES</name>
<description>Data Float Time</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TDF_MODE</name>
<description>TDF Optimization</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PMEN</name>
<description>Page Mode Enabled</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PS</name>
<description>Page Size</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DELAY1</name>
<description>SMC Delay on I/O</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>Delay1</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay2</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay3</name>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay4</name>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay5</name>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay6</name>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay7</name>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay8</name>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DELAY2</name>
<description>SMC Delay on I/O</description>
<addressOffset>0x000000C4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>DELAY3</name>
<description>SMC Delay on I/O</description>
<addressOffset>0x000000C8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>DELAY4</name>
<description>SMC Delay on I/O</description>
<addressOffset>0x000000CC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>DELAY5</name>
<description>SMC Delay on I/O</description>
<addressOffset>0x000000D0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>DELAY6</name>
<description>SMC Delay on I/O</description>
<addressOffset>0x000000D4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>DELAY7</name>
<description>SMC Delay on I/O</description>
<addressOffset>0x000000D8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>DELAY8</name>
<description>SMC Delay on I/O</description>
<addressOffset>0x000000DC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
</register>
</registers>
</peripheral>
<peripheral>
<name>MATRIX</name>
<version>6468A</version>
<description>AHB Bus Matrix</description>
<prependToName>MATRIX_</prependToName>
<baseAddress>0xFFFFEA00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<dim>11</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-10</dimIndex>
<name>MCFG[%s]</name>
<description>Master Configuration Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>ULBT</name>
<description>Undefined Length Burst Type</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-7</dimIndex>
<name>SCFG[%s]</name>
<description>Slave Configuration Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>SLOT_CYCLE</name>
<description>Maximum Bus Grant Duration for Masters</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DEFMSTR_TYPE</name>
<description>Default Master Type</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FIXED_DEFMSTR</name>
<description>Fixed Default Master</description>
<bitOffset>18</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRAS0</name>
<description>Priority Register A for Slave 0</description>
<addressOffset>0x00000080</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0PR</name>
<description>Master 0 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M1PR</name>
<description>Master 1 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M2PR</name>
<description>Master 2 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M3PR</name>
<description>Master 3 Priority</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M4PR</name>
<description>Master 4 Priority</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M5PR</name>
<description>Master 5 Priority</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M6PR</name>
<description>Master 6 Priority</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M7PR</name>
<description>Master 7 Priority</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRBS0</name>
<description>Priority Register B for Slave 0</description>
<addressOffset>0x00000084</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M8PR</name>
<description>Master 8 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M9PR</name>
<description>Master 9 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M10PR</name>
<description>Master 10 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRAS1</name>
<description>Priority Register A for Slave 1</description>
<addressOffset>0x00000088</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0PR</name>
<description>Master 0 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M1PR</name>
<description>Master 1 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M2PR</name>
<description>Master 2 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M3PR</name>
<description>Master 3 Priority</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M4PR</name>
<description>Master 4 Priority</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M5PR</name>
<description>Master 5 Priority</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M6PR</name>
<description>Master 6 Priority</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M7PR</name>
<description>Master 7 Priority</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRBS1</name>
<description>Priority Register B for Slave 1</description>
<addressOffset>0x0000008C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M8PR</name>
<description>Master 8 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M9PR</name>
<description>Master 9 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M10PR</name>
<description>Master 10 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRAS2</name>
<description>Priority Register A for Slave 2</description>
<addressOffset>0x00000090</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0PR</name>
<description>Master 0 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M1PR</name>
<description>Master 1 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M2PR</name>
<description>Master 2 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M3PR</name>
<description>Master 3 Priority</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M4PR</name>
<description>Master 4 Priority</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M5PR</name>
<description>Master 5 Priority</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M6PR</name>
<description>Master 6 Priority</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M7PR</name>
<description>Master 7 Priority</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRBS2</name>
<description>Priority Register B for Slave 2</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M8PR</name>
<description>Master 8 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M9PR</name>
<description>Master 9 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M10PR</name>
<description>Master 10 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRAS3</name>
<description>Priority Register A for Slave 3</description>
<addressOffset>0x00000098</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0PR</name>
<description>Master 0 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M1PR</name>
<description>Master 1 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M2PR</name>
<description>Master 2 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M3PR</name>
<description>Master 3 Priority</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M4PR</name>
<description>Master 4 Priority</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M5PR</name>
<description>Master 5 Priority</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M6PR</name>
<description>Master 6 Priority</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M7PR</name>
<description>Master 7 Priority</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRBS3</name>
<description>Priority Register B for Slave 3</description>
<addressOffset>0x0000009C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M8PR</name>
<description>Master 8 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M9PR</name>
<description>Master 9 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M10PR</name>
<description>Master 10 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRAS4</name>
<description>Priority Register A for Slave 4</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0PR</name>
<description>Master 0 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M1PR</name>
<description>Master 1 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M2PR</name>
<description>Master 2 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M3PR</name>
<description>Master 3 Priority</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M4PR</name>
<description>Master 4 Priority</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M5PR</name>
<description>Master 5 Priority</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M6PR</name>
<description>Master 6 Priority</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M7PR</name>
<description>Master 7 Priority</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRBS4</name>
<description>Priority Register B for Slave 4</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M8PR</name>
<description>Master 8 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M9PR</name>
<description>Master 9 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M10PR</name>
<description>Master 10 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRAS5</name>
<description>Priority Register A for Slave 5</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0PR</name>
<description>Master 0 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M1PR</name>
<description>Master 1 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M2PR</name>
<description>Master 2 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M3PR</name>
<description>Master 3 Priority</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M4PR</name>
<description>Master 4 Priority</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M5PR</name>
<description>Master 5 Priority</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M6PR</name>
<description>Master 6 Priority</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M7PR</name>
<description>Master 7 Priority</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRBS5</name>
<description>Priority Register B for Slave 5</description>
<addressOffset>0x000000AC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M8PR</name>
<description>Master 8 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M9PR</name>
<description>Master 9 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M10PR</name>
<description>Master 10 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRAS6</name>
<description>Priority Register A for Slave 6</description>
<addressOffset>0x000000B0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0PR</name>
<description>Master 0 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M1PR</name>
<description>Master 1 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M2PR</name>
<description>Master 2 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M3PR</name>
<description>Master 3 Priority</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M4PR</name>
<description>Master 4 Priority</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M5PR</name>
<description>Master 5 Priority</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M6PR</name>
<description>Master 6 Priority</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M7PR</name>
<description>Master 7 Priority</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRBS6</name>
<description>Priority Register B for Slave 6</description>
<addressOffset>0x000000B4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M8PR</name>
<description>Master 8 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M9PR</name>
<description>Master 9 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M10PR</name>
<description>Master 10 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRAS7</name>
<description>Priority Register A for Slave 7</description>
<addressOffset>0x000000B8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M0PR</name>
<description>Master 0 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M1PR</name>
<description>Master 1 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M2PR</name>
<description>Master 2 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M3PR</name>
<description>Master 3 Priority</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M4PR</name>
<description>Master 4 Priority</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M5PR</name>
<description>Master 5 Priority</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M6PR</name>
<description>Master 6 Priority</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M7PR</name>
<description>Master 7 Priority</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PRBS7</name>
<description>Priority Register B for Slave 7</description>
<addressOffset>0x000000BC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>M8PR</name>
<description>Master 8 Priority</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M9PR</name>
<description>Master 9 Priority</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>M10PR</name>
<description>Master 10 Priority</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>MRCR</name>
<description>Master Remap Control Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RCB0</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RCB1</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RCB2</name>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RCB3</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RCB4</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RCB5</name>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RCB6</name>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RCB7</name>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RCB8</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RCB9</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RCB10</name>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000001E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect ENable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY (Write-only)</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000001E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Violation Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DMAC</name>
<version>6233G</version>
<description>DMA Controller</description>
<prependToName>DMAC_</prependToName>
<baseAddress>0xFFFFEC00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>DMAC</name>
<value>21</value>
</interrupt>
<registers>
<register>
<name>GCFG</name>
<description>DMAC Global Configuration Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000010</resetValue>
<fields>
<field>
<name>ARB_CFG</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>EN</name>
<description>DMAC Enable Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENABLE</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SREQ</name>
<description>DMAC Software Single Request Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SSREQ0</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSREQ0</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SSREQ1</name>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSREQ1</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SSREQ2</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSREQ2</name>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SSREQ3</name>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSREQ3</name>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SSREQ4</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSREQ4</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SSREQ5</name>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSREQ5</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SSREQ6</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSREQ6</name>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SSREQ7</name>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DSREQ7</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CREQ</name>
<description>DMAC Software Chunk Transfer Request Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SCREQ0</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DCREQ0</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCREQ1</name>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DCREQ1</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCREQ2</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DCREQ2</name>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCREQ3</name>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DCREQ3</name>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCREQ4</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DCREQ4</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCREQ5</name>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DCREQ5</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCREQ6</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DCREQ6</name>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCREQ7</name>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DCREQ7</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>LAST</name>
<description>DMAC Software Last Transfer Flag Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SLAST0</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLAST0</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SLAST1</name>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLAST1</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SLAST2</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLAST2</name>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SLAST3</name>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLAST3</name>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SLAST4</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLAST4</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SLAST5</name>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLAST5</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SLAST6</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLAST6</name>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SLAST7</name>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DLAST7</name>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>EBCIER</name>
<description>DMAC Error, Chained Buffer transfer completed and Buffer transfer completed Interrupt Enable register.</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>BTC0</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC1</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC2</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC3</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC4</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC5</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC6</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC7</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC0</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC1</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC2</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC3</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC4</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC5</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC6</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC7</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR0</name>
<description>Access Error [7:0]</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR1</name>
<description>Access Error [7:0]</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR2</name>
<description>Access Error [7:0]</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR3</name>
<description>Access Error [7:0]</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR4</name>
<description>Access Error [7:0]</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR5</name>
<description>Access Error [7:0]</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR6</name>
<description>Access Error [7:0]</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR7</name>
<description>Access Error [7:0]</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EBCIDR</name>
<description>DMAC Error, Chained Buffer transfer completed and Buffer transfer completed Interrupt Disable register.</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>BTC0</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC1</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC2</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC3</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC4</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC5</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC6</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BTC7</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC0</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC1</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC2</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC3</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC4</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC5</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC6</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CBTC7</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR0</name>
<description>Access Error [7:0]</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR1</name>
<description>Access Error [7:0]</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR2</name>
<description>Access Error [7:0]</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR3</name>
<description>Access Error [7:0]</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR4</name>
<description>Access Error [7:0]</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR5</name>
<description>Access Error [7:0]</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR6</name>
<description>Access Error [7:0]</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ERR7</name>
<description>Access Error [7:0]</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EBCIMR</name>
<description>DMAC Error, Chained Buffer transfer completed and Buffer transfer completed Mask Register.</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BTC0</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC1</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC2</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC3</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC4</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC5</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC6</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC7</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC0</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC1</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC2</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC3</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC4</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC5</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC6</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC7</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR0</name>
<description>Access Error [7:0]</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR1</name>
<description>Access Error [7:0]</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR2</name>
<description>Access Error [7:0]</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR3</name>
<description>Access Error [7:0]</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR4</name>
<description>Access Error [7:0]</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR5</name>
<description>Access Error [7:0]</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR6</name>
<description>Access Error [7:0]</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR7</name>
<description>Access Error [7:0]</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EBCISR</name>
<description>DMAC Error, Chained Buffer transfer completed and Buffer transfer completed Status Register.</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BTC0</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC1</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC2</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC3</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC4</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC5</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC6</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTC7</name>
<description>Buffer Transfer Completed [7:0]</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC0</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC1</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC2</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC3</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC4</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC5</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC6</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CBTC7</name>
<description>Chained Buffer Transfer Completed [7:0]</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR0</name>
<description>Access Error [7:0]</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR1</name>
<description>Access Error [7:0]</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR2</name>
<description>Access Error [7:0]</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR3</name>
<description>Access Error [7:0]</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR4</name>
<description>Access Error [7:0]</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR5</name>
<description>Access Error [7:0]</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR6</name>
<description>Access Error [7:0]</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ERR7</name>
<description>Access Error [7:0]</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CHER</name>
<description>DMAC Channel Handler Enable Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>ENA0</name>
<description>[7:0]</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENA1</name>
<description>[7:0]</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENA2</name>
<description>[7:0]</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENA3</name>
<description>[7:0]</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENA4</name>
<description>[7:0]</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENA5</name>
<description>[7:0]</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENA6</name>
<description>[7:0]</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENA7</name>
<description>[7:0]</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SUSP0</name>
<description>[7:0]</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SUSP1</name>
<description>[7:0]</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SUSP2</name>
<description>[7:0]</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SUSP3</name>
<description>[7:0]</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SUSP4</name>
<description>[7:0]</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SUSP5</name>
<description>[7:0]</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SUSP6</name>
<description>[7:0]</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SUSP7</name>
<description>[7:0]</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>KEEP0</name>
<description>[7:0]</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>KEEP1</name>
<description>[7:0]</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>KEEP2</name>
<description>[7:0]</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>KEEP3</name>
<description>[7:0]</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>KEEP4</name>
<description>[7:0]</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>KEEP5</name>
<description>[7:0]</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>KEEP6</name>
<description>[7:0]</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>KEEP7</name>
<description>[7:0]</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CHDR</name>
<description>DMAC Channel Handler Disable Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>DIS0</name>
<description>[7:0]</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DIS1</name>
<description>[7:0]</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DIS2</name>
<description>[7:0]</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DIS3</name>
<description>[7:0]</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DIS4</name>
<description>[7:0]</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DIS5</name>
<description>[7:0]</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DIS6</name>
<description>[7:0]</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DIS7</name>
<description>[7:0]</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RES0</name>
<description>[7:0]</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RES1</name>
<description>[7:0]</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RES2</name>
<description>[7:0]</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RES3</name>
<description>[7:0]</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RES4</name>
<description>[7:0]</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RES5</name>
<description>[7:0]</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RES6</name>
<description>[7:0]</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RES7</name>
<description>[7:0]</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CHSR</name>
<description>DMAC Channel Handler Status Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00FF0000</resetValue>
<fields>
<field>
<name>ENA0</name>
<description>[7:0]</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENA1</name>
<description>[7:0]</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENA2</name>
<description>[7:0]</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENA3</name>
<description>[7:0]</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENA4</name>
<description>[7:0]</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENA5</name>
<description>[7:0]</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENA6</name>
<description>[7:0]</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENA7</name>
<description>[7:0]</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SUSP0</name>
<description>[7:0]</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SUSP1</name>
<description>[7:0]</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SUSP2</name>
<description>[7:0]</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SUSP3</name>
<description>[7:0]</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SUSP4</name>
<description>[7:0]</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SUSP5</name>
<description>[7:0]</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SUSP6</name>
<description>[7:0]</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SUSP7</name>
<description>[7:0]</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EMPT0</name>
<description>[7:0]</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EMPT1</name>
<description>[7:0]</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EMPT2</name>
<description>[7:0]</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EMPT3</name>
<description>[7:0]</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EMPT4</name>
<description>[7:0]</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EMPT5</name>
<description>[7:0]</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EMPT6</name>
<description>[7:0]</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EMPT7</name>
<description>[7:0]</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STAL0</name>
<description>[7:0]</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STAL1</name>
<description>[7:0]</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STAL2</name>
<description>[7:0]</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STAL3</name>
<description>[7:0]</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STAL4</name>
<description>[7:0]</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STAL5</name>
<description>[7:0]</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STAL6</name>
<description>[7:0]</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STAL7</name>
<description>[7:0]</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SADDR0</name>
<description>DMAC Channel Source Address Register (ch_num = 0)</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DADDR0</name>
<description>DMAC Channel Destination Address Register (ch_num = 0)</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DSCR0</name>
<description>DMAC Channel Descriptor Address Register (ch_num = 0)</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DSCR_IF</name>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DSCR</name>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLA0</name>
<description>DMAC Channel Control A Register (ch_num = 0)</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BTSIZE</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCSIZE</name>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DCSIZE</name>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_WIDTH</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_WIDTH</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DONE</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLB0</name>
<description>DMAC Channel Control B Register (ch_num = 0)</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIF</name>
<description>Source Interface Selection Field</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The source transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The source transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The source transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIF</name>
<description>Destination Interface Selection Field</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The destination transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The destination transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The destination transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_DSCR</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_DSCR</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FC</name>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MEM2MEM_DMA_FC</name>
<description>Memory-to-Memory Transfer DMAC is flow controller</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_DMA_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_DMA_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DMA_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_PER_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_PER_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_SPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_INCR</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The source address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The source address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The source address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_INCR</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The destination address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The destination address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The destination address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IEN</name>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AUTO</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CFG0</name>
<description>DMAC Channel Configuration Register (ch_num = 0)</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01000000</resetValue>
<fields>
<field>
<name>SRC_PER</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_PER</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_REP</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_H2SEL</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_REP</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_H2SEL</name>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOD</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_B</name>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF_L</name>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AHB_PROT</name>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FIFOCFG</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALAP_CFG</name>
<description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_CFG</name>
<description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ASAP_CFG</name>
<description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SADDR1</name>
<description>DMAC Channel Source Address Register (ch_num = 1)</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DADDR1</name>
<description>DMAC Channel Destination Address Register (ch_num = 1)</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DSCR1</name>
<description>DMAC Channel Descriptor Address Register (ch_num = 1)</description>
<addressOffset>0x0000006C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DSCR_IF</name>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DSCR</name>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLA1</name>
<description>DMAC Channel Control A Register (ch_num = 1)</description>
<addressOffset>0x00000070</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BTSIZE</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCSIZE</name>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DCSIZE</name>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_WIDTH</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_WIDTH</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DONE</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLB1</name>
<description>DMAC Channel Control B Register (ch_num = 1)</description>
<addressOffset>0x00000074</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIF</name>
<description>Source Interface Selection Field</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The source transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The source transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The source transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIF</name>
<description>Destination Interface Selection Field</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The destination transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The destination transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The destination transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_DSCR</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_DSCR</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FC</name>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MEM2MEM_DMA_FC</name>
<description>Memory-to-Memory Transfer DMAC is flow controller</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_DMA_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_DMA_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DMA_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_PER_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_PER_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_SPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_INCR</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The source address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The source address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The source address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_INCR</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The destination address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The destination address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The destination address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IEN</name>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AUTO</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CFG1</name>
<description>DMAC Channel Configuration Register (ch_num = 1)</description>
<addressOffset>0x00000078</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01000000</resetValue>
<fields>
<field>
<name>SRC_PER</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_PER</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_REP</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_H2SEL</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_REP</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_H2SEL</name>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOD</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_B</name>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF_L</name>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AHB_PROT</name>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FIFOCFG</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALAP_CFG</name>
<description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_CFG</name>
<description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ASAP_CFG</name>
<description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SADDR2</name>
<description>DMAC Channel Source Address Register (ch_num = 2)</description>
<addressOffset>0x0000008C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DADDR2</name>
<description>DMAC Channel Destination Address Register (ch_num = 2)</description>
<addressOffset>0x00000090</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DSCR2</name>
<description>DMAC Channel Descriptor Address Register (ch_num = 2)</description>
<addressOffset>0x00000094</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DSCR_IF</name>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DSCR</name>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLA2</name>
<description>DMAC Channel Control A Register (ch_num = 2)</description>
<addressOffset>0x00000098</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BTSIZE</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCSIZE</name>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DCSIZE</name>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_WIDTH</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_WIDTH</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DONE</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLB2</name>
<description>DMAC Channel Control B Register (ch_num = 2)</description>
<addressOffset>0x0000009C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIF</name>
<description>Source Interface Selection Field</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The source transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The source transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The source transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIF</name>
<description>Destination Interface Selection Field</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The destination transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The destination transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The destination transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_DSCR</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_DSCR</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FC</name>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MEM2MEM_DMA_FC</name>
<description>Memory-to-Memory Transfer DMAC is flow controller</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_DMA_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_DMA_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DMA_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_PER_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_PER_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_SPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_INCR</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The source address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The source address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The source address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_INCR</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The destination address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The destination address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The destination address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IEN</name>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AUTO</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CFG2</name>
<description>DMAC Channel Configuration Register (ch_num = 2)</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01000000</resetValue>
<fields>
<field>
<name>SRC_PER</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_PER</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_REP</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_H2SEL</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_REP</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_H2SEL</name>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOD</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_B</name>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF_L</name>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AHB_PROT</name>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FIFOCFG</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALAP_CFG</name>
<description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_CFG</name>
<description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ASAP_CFG</name>
<description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SADDR3</name>
<description>DMAC Channel Source Address Register (ch_num = 3)</description>
<addressOffset>0x000000B4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DADDR3</name>
<description>DMAC Channel Destination Address Register (ch_num = 3)</description>
<addressOffset>0x000000B8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DSCR3</name>
<description>DMAC Channel Descriptor Address Register (ch_num = 3)</description>
<addressOffset>0x000000BC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DSCR_IF</name>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DSCR</name>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLA3</name>
<description>DMAC Channel Control A Register (ch_num = 3)</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BTSIZE</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCSIZE</name>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DCSIZE</name>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_WIDTH</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_WIDTH</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DONE</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLB3</name>
<description>DMAC Channel Control B Register (ch_num = 3)</description>
<addressOffset>0x000000C4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIF</name>
<description>Source Interface Selection Field</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The source transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The source transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The source transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIF</name>
<description>Destination Interface Selection Field</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The destination transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The destination transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The destination transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_DSCR</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_DSCR</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FC</name>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MEM2MEM_DMA_FC</name>
<description>Memory-to-Memory Transfer DMAC is flow controller</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_DMA_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_DMA_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DMA_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_PER_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_PER_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_SPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_INCR</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The source address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The source address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The source address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_INCR</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The destination address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The destination address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The destination address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IEN</name>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AUTO</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CFG3</name>
<description>DMAC Channel Configuration Register (ch_num = 3)</description>
<addressOffset>0x000000C8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01000000</resetValue>
<fields>
<field>
<name>SRC_PER</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_PER</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_REP</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_H2SEL</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_REP</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_H2SEL</name>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOD</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_B</name>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF_L</name>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AHB_PROT</name>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FIFOCFG</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALAP_CFG</name>
<description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_CFG</name>
<description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ASAP_CFG</name>
<description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SADDR4</name>
<description>DMAC Channel Source Address Register (ch_num = 4)</description>
<addressOffset>0x000000DC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DADDR4</name>
<description>DMAC Channel Destination Address Register (ch_num = 4)</description>
<addressOffset>0x000000E0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DSCR4</name>
<description>DMAC Channel Descriptor Address Register (ch_num = 4)</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DSCR_IF</name>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DSCR</name>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLA4</name>
<description>DMAC Channel Control A Register (ch_num = 4)</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BTSIZE</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCSIZE</name>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DCSIZE</name>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_WIDTH</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_WIDTH</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DONE</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLB4</name>
<description>DMAC Channel Control B Register (ch_num = 4)</description>
<addressOffset>0x000000EC</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIF</name>
<description>Source Interface Selection Field</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The source transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The source transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The source transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIF</name>
<description>Destination Interface Selection Field</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The destination transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The destination transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The destination transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_DSCR</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_DSCR</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FC</name>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MEM2MEM_DMA_FC</name>
<description>Memory-to-Memory Transfer DMAC is flow controller</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_DMA_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_DMA_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DMA_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_PER_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_PER_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_SPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_INCR</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The source address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The source address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The source address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_INCR</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The destination address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The destination address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The destination address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IEN</name>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AUTO</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CFG4</name>
<description>DMAC Channel Configuration Register (ch_num = 4)</description>
<addressOffset>0x000000F0</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01000000</resetValue>
<fields>
<field>
<name>SRC_PER</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_PER</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_REP</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_H2SEL</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_REP</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_H2SEL</name>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOD</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_B</name>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF_L</name>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AHB_PROT</name>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FIFOCFG</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALAP_CFG</name>
<description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_CFG</name>
<description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ASAP_CFG</name>
<description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SADDR5</name>
<description>DMAC Channel Source Address Register (ch_num = 5)</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DADDR5</name>
<description>DMAC Channel Destination Address Register (ch_num = 5)</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DSCR5</name>
<description>DMAC Channel Descriptor Address Register (ch_num = 5)</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DSCR_IF</name>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DSCR</name>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLA5</name>
<description>DMAC Channel Control A Register (ch_num = 5)</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BTSIZE</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCSIZE</name>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DCSIZE</name>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_WIDTH</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_WIDTH</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DONE</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLB5</name>
<description>DMAC Channel Control B Register (ch_num = 5)</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIF</name>
<description>Source Interface Selection Field</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The source transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The source transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The source transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIF</name>
<description>Destination Interface Selection Field</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The destination transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The destination transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The destination transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_DSCR</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_DSCR</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FC</name>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MEM2MEM_DMA_FC</name>
<description>Memory-to-Memory Transfer DMAC is flow controller</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_DMA_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_DMA_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DMA_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_PER_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_PER_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_SPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_INCR</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The source address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The source address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The source address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_INCR</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The destination address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The destination address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The destination address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IEN</name>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AUTO</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CFG5</name>
<description>DMAC Channel Configuration Register (ch_num = 5)</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01000000</resetValue>
<fields>
<field>
<name>SRC_PER</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_PER</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_REP</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_H2SEL</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_REP</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_H2SEL</name>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOD</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_B</name>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF_L</name>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AHB_PROT</name>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FIFOCFG</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALAP_CFG</name>
<description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_CFG</name>
<description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ASAP_CFG</name>
<description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SADDR6</name>
<description>DMAC Channel Source Address Register (ch_num = 6)</description>
<addressOffset>0x0000012C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DADDR6</name>
<description>DMAC Channel Destination Address Register (ch_num = 6)</description>
<addressOffset>0x00000130</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DSCR6</name>
<description>DMAC Channel Descriptor Address Register (ch_num = 6)</description>
<addressOffset>0x00000134</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DSCR_IF</name>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DSCR</name>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLA6</name>
<description>DMAC Channel Control A Register (ch_num = 6)</description>
<addressOffset>0x00000138</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BTSIZE</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCSIZE</name>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DCSIZE</name>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_WIDTH</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_WIDTH</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DONE</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLB6</name>
<description>DMAC Channel Control B Register (ch_num = 6)</description>
<addressOffset>0x0000013C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIF</name>
<description>Source Interface Selection Field</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The source transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The source transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The source transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIF</name>
<description>Destination Interface Selection Field</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The destination transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The destination transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The destination transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_DSCR</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_DSCR</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FC</name>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MEM2MEM_DMA_FC</name>
<description>Memory-to-Memory Transfer DMAC is flow controller</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_DMA_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_DMA_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DMA_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_PER_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_PER_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_SPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_INCR</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The source address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The source address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The source address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_INCR</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The destination address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The destination address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The destination address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IEN</name>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AUTO</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CFG6</name>
<description>DMAC Channel Configuration Register (ch_num = 6)</description>
<addressOffset>0x00000140</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01000000</resetValue>
<fields>
<field>
<name>SRC_PER</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_PER</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_REP</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_H2SEL</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_REP</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_H2SEL</name>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOD</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_B</name>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF_L</name>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AHB_PROT</name>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FIFOCFG</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALAP_CFG</name>
<description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_CFG</name>
<description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ASAP_CFG</name>
<description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SADDR7</name>
<description>DMAC Channel Source Address Register (ch_num = 7)</description>
<addressOffset>0x00000154</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DADDR7</name>
<description>DMAC Channel Destination Address Register (ch_num = 7)</description>
<addressOffset>0x00000158</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DADDR</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DSCR7</name>
<description>DMAC Channel Descriptor Address Register (ch_num = 7)</description>
<addressOffset>0x0000015C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DSCR_IF</name>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The buffer transfer descriptor is fetched via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DSCR</name>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLA7</name>
<description>DMAC Channel Control A Register (ch_num = 7)</description>
<addressOffset>0x00000160</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BTSIZE</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SCSIZE</name>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DCSIZE</name>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>CHK_1</name>
<description>1 data transferred</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_4</name>
<description>4 data transferred</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_8</name>
<description>8 data transferred</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_16</name>
<description>16 data transferred</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_32</name>
<description>32 data transferred</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_64</name>
<description>64 data transferred</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_128</name>
<description>128 data transferred</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CHK_256</name>
<description>256 data transferred</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_WIDTH</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_WIDTH</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>BYTE</name>
<description>the transfer size is set to 8-bit width</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_WORD</name>
<description>the transfer size is set to 16-bit width</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>the transfer size is set to 32-bit width</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DONE</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CTRLB7</name>
<description>DMAC Channel Control B Register (ch_num = 7)</description>
<addressOffset>0x00000164</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIF</name>
<description>Source Interface Selection Field</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The source transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The source transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The source transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIF</name>
<description>Destination Interface Selection Field</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>AHB_IFO</name>
<description>The destination transfer is done via AHB-Lite Interface 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF1</name>
<description>The destination transfer is done via AHB-Lite Interface 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AHB_IF2</name>
<description>The destination transfer is done via AHB-Lite Interface 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_DSCR</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_DSCR</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FC</name>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MEM2MEM_DMA_FC</name>
<description>Memory-to-Memory Transfer DMAC is flow controller</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_DMA_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_DMA_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DMA_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2MEM_PER_FC</name>
<description>Peripheral-to-Memory Transfer DMAC is flow controller</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MEM2PER_PER_FC</name>
<description>Memory-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_SPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>PER2PER_DPER_FC</name>
<description>Peripheral-to-Peripheral Transfer DMAC is flow controller</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRC_INCR</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The source address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The source address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The source address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DST_INCR</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>INCREMENTING</name>
<description>The destination address is incremented</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DECREMENTING</name>
<description>The destination address is decremented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FIXED</name>
<description>The destination address remains unchanged</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IEN</name>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AUTO</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CFG7</name>
<description>DMAC Channel Configuration Register (ch_num = 7)</description>
<addressOffset>0x00000168</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01000000</resetValue>
<fields>
<field>
<name>SRC_PER</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_PER</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_REP</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRC_H2SEL</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_REP</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DST_H2SEL</name>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SOD</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_B</name>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>LOCK_IF_L</name>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AHB_PROT</name>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>FIFOCFG</name>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>ALAP_CFG</name>
<description>The largest defined length AHB burst is performed on the destination AHB interface.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF_CFG</name>
<description>When half FIFO size is available/filled, a source/destination request is serviced.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ASAP_CFG</name>
<description>When there is enough space/data available to perform a single AHB access, then the request is serviced.</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000001E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000001E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DBGU</name>
<version>6059K</version>
<description>Debug Unit</description>
<prependToName>DBGU_</prependToName>
<baseAddress>0xFFFFEE00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RSTRX</name>
<description>Reset Receiver</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTTX</name>
<description>Reset Transmitter</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXDIS</name>
<description>Receiver Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXDIS</name>
<description>Transmitter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RSTSTA</name>
<description>Reset Status Bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PAR</name>
<description>Parity Type</description>
<bitOffset>9</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CHMODE</name>
<description>Channel Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Enable RXRDY Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Enable TXRDY Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>Enable End of Receive Transfer Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>Enable End of Transmit Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Enable Overrun Error Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Enable Framing Error Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Enable Parity Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Enable TXEMPTY Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Enable Buffer Empty Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Enable Buffer Full Interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COMMTX</name>
<description>Enable COMMTX (from ARM) Interrupt</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COMMRX</name>
<description>Enable COMMRX (from ARM) Interrupt</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Disable RXRDY Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Disable TXRDY Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDRX</name>
<description>Disable End of Receive Transfer Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENDTX</name>
<description>Disable End of Transmit Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>OVRE</name>
<description>Disable Overrun Error Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>FRAME</name>
<description>Disable Framing Error Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PARE</name>
<description>Disable Parity Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Disable TXEMPTY Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Disable Buffer Empty Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Disable Buffer Full Interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COMMTX</name>
<description>Disable COMMTX (from ARM) Interrupt</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>COMMRX</name>
<description>Disable COMMRX (from ARM) Interrupt</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXRDY</name>
<description>Mask RXRDY Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Disable TXRDY Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>Mask End of Receive Transfer Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>Mask End of Transmit Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Mask Overrun Error Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Mask Framing Error Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Mask Parity Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Mask TXEMPTY Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Mask TXBUFE Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Mask RXBUFF Interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COMMTX</name>
<description>Mask COMMTX Interrupt</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COMMRX</name>
<description>Mask COMMRX Interrupt</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>RXRDY</name>
<description>Receiver Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXRDY</name>
<description>Transmitter Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDRX</name>
<description>End of Receiver Transfer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENDTX</name>
<description>End of Transmitter Transfer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FRAME</name>
<description>Framing Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PARE</name>
<description>Parity Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXEMPTY</name>
<description>Transmitter Empty</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXBUFE</name>
<description>Transmission Buffer Empty</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXBUFF</name>
<description>Receive Buffer Full</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COMMTX</name>
<description>Debug Communication Channel Write Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COMMRX</name>
<description>Debug Communication Channel Read Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Receive Holding Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCHR</name>
<description>Received Character</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>THR</name>
<description>Transmit Holding Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>TXCHR</name>
<description>Character to be Transmitted</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BRGR</name>
<description>Baud Rate Generator Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CD</name>
<description>Clock Divisor</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CIDR</name>
<description>Chip ID Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>VERSION</name>
<description>Version of the Device</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPROC</name>
<description>Embedded Processor</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NVPSIZ</name>
<description>Nonvolatile Program Memory Size</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NVPSIZ2</name>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SRAMSIZ</name>
<description>Internal SRAM Size</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ARCH</name>
<description>Architecture Identifier</description>
<bitOffset>20</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NVPTYP</name>
<description>Nonvolatile Program Memory Type</description>
<bitOffset>28</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EXT</name>
<description>Extension Flag</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EXID</name>
<description>Chip ID Extension Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>EXID</name>
<description>Chip ID Extension</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>FNR</name>
<description>Force NTRST Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FNTRST</name>
<description>Force NTRST</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RPR</name>
<description>Receive Pointer Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXPTR</name>
<description>Receive Pointer Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RCR</name>
<description>Receive Counter Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXCTR</name>
<description>Receive Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TPR</name>
<description>Transmit Pointer Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXPTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Transmit Counter Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXCTR</name>
<description>Transmit Counter Register</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNPR</name>
<description>Receive Next Pointer Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNPTR</name>
<description>Receive Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>RNCR</name>
<description>Receive Next Counter Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXNCTR</name>
<description>Receive Next Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNPR</name>
<description>Transmit Next Pointer Register</description>
<addressOffset>0x00000118</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNPTR</name>
<description>Transmit Next Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TNCR</name>
<description>Transmit Next Counter Register</description>
<addressOffset>0x0000011C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TXNCTR</name>
<description>Transmit Counter Next</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PTCR</name>
<description>Transfer Control Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RXTDIS</name>
<description>Receiver Transfer Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TXTDIS</name>
<description>Transmitter Transfer Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PTSR</name>
<description>Transfer Status Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXTEN</name>
<description>Receiver Transfer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXTEN</name>
<description>Transmitter Transfer Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>AIC</name>
<version>6075F</version>
<description>Advanced Interrupt Controller</description>
<prependToName>AIC_</prependToName>
<baseAddress>0xFFFFF000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>FIQ</name>
<value>0</value>
</interrupt>
<interrupt>
<name>IRQ</name>
<value>31</value>
</interrupt>
<registers>
<register>
<dim>32</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-31</dimIndex>
<name>SMR[%s]</name>
<description>Source Mode Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>PRIOR</name>
<description>Priority Level</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SRCTYPE</name>
<description>Interrupt Source Type</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<dim>32</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-31</dimIndex>
<name>SVR[%s]</name>
<description>Source Vector Register</description>
<addressOffset>0x00000080</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>VECTOR</name>
<description>Source Vector</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>IVR</name>
<description>Interrupt Vector Register</description>
<addressOffset>0x00000100</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IRQV</name>
<description>Interrupt Vector Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>FVR</name>
<description>FIQ Interrupt Vector Register</description>
<addressOffset>0x00000104</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FIQV</name>
<description>FIQ Vector Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x00000108</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IRQID</name>
<description>Current Interrupt Identifier</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IPR</name>
<description>Interrupt Pending Register</description>
<addressOffset>0x0000010C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FIQ</name>
<description>Interrupt Pending</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SYS</name>
<description>Interrupt Pending</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID2</name>
<description>Interrupt Pending</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID3</name>
<description>Interrupt Pending</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID4</name>
<description>Interrupt Pending</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID5</name>
<description>Interrupt Pending</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID6</name>
<description>Interrupt Pending</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID7</name>
<description>Interrupt Pending</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID8</name>
<description>Interrupt Pending</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID9</name>
<description>Interrupt Pending</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID10</name>
<description>Interrupt Pending</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID11</name>
<description>Interrupt Pending</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID12</name>
<description>Interrupt Pending</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID13</name>
<description>Interrupt Pending</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID14</name>
<description>Interrupt Pending</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID15</name>
<description>Interrupt Pending</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID16</name>
<description>Interrupt Pending</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID17</name>
<description>Interrupt Pending</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID18</name>
<description>Interrupt Pending</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID19</name>
<description>Interrupt Pending</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID20</name>
<description>Interrupt Pending</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID21</name>
<description>Interrupt Pending</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID22</name>
<description>Interrupt Pending</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID23</name>
<description>Interrupt Pending</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID24</name>
<description>Interrupt Pending</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID25</name>
<description>Interrupt Pending</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID26</name>
<description>Interrupt Pending</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID27</name>
<description>Interrupt Pending</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID28</name>
<description>Interrupt Pending</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID29</name>
<description>Interrupt Pending</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID30</name>
<description>Interrupt Pending</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID31</name>
<description>Interrupt Pending</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000110</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FIQ</name>
<description>Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SYS</name>
<description>Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID2</name>
<description>Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID3</name>
<description>Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID4</name>
<description>Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID5</name>
<description>Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID6</name>
<description>Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID7</name>
<description>Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID8</name>
<description>Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID9</name>
<description>Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID10</name>
<description>Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID11</name>
<description>Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID12</name>
<description>Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID13</name>
<description>Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID14</name>
<description>Interrupt Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID15</name>
<description>Interrupt Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID16</name>
<description>Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID17</name>
<description>Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID18</name>
<description>Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID19</name>
<description>Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID20</name>
<description>Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID21</name>
<description>Interrupt Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID22</name>
<description>Interrupt Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID23</name>
<description>Interrupt Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID24</name>
<description>Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID25</name>
<description>Interrupt Mask</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID26</name>
<description>Interrupt Mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID27</name>
<description>Interrupt Mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID28</name>
<description>Interrupt Mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID29</name>
<description>Interrupt Mask</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID30</name>
<description>Interrupt Mask</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID31</name>
<description>Interrupt Mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CISR</name>
<description>Core Interrupt Status Register</description>
<addressOffset>0x00000114</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NFIQ</name>
<description>NFIQ Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NIRQ</name>
<description>NIRQ Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IECR</name>
<description>Interrupt Enable Command Register</description>
<addressOffset>0x00000120</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FIQ</name>
<description>Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SYS</name>
<description>Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID2</name>
<description>Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID3</name>
<description>Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID4</name>
<description>Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID5</name>
<description>Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID6</name>
<description>Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID7</name>
<description>Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID8</name>
<description>Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID9</name>
<description>Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID10</name>
<description>Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID11</name>
<description>Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID12</name>
<description>Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID13</name>
<description>Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID14</name>
<description>Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID15</name>
<description>Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID16</name>
<description>Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID17</name>
<description>Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID18</name>
<description>Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID19</name>
<description>Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID20</name>
<description>Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID21</name>
<description>Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID22</name>
<description>Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID23</name>
<description>Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID24</name>
<description>Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID25</name>
<description>Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID26</name>
<description>Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID27</name>
<description>Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID28</name>
<description>Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID29</name>
<description>Interrupt Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID30</name>
<description>Interrupt Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID31</name>
<description>Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDCR</name>
<description>Interrupt Disable Command Register</description>
<addressOffset>0x00000124</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FIQ</name>
<description>Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SYS</name>
<description>Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID2</name>
<description>Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID3</name>
<description>Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID4</name>
<description>Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID5</name>
<description>Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID6</name>
<description>Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID7</name>
<description>Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID8</name>
<description>Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID9</name>
<description>Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID10</name>
<description>Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID11</name>
<description>Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID12</name>
<description>Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID13</name>
<description>Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID14</name>
<description>Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID15</name>
<description>Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID16</name>
<description>Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID17</name>
<description>Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID18</name>
<description>Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID19</name>
<description>Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID20</name>
<description>Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID21</name>
<description>Interrupt Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID22</name>
<description>Interrupt Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID23</name>
<description>Interrupt Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID24</name>
<description>Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID25</name>
<description>Interrupt Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID26</name>
<description>Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID27</name>
<description>Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID28</name>
<description>Interrupt Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID29</name>
<description>Interrupt Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID30</name>
<description>Interrupt Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID31</name>
<description>Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ICCR</name>
<description>Interrupt Clear Command Register</description>
<addressOffset>0x00000128</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FIQ</name>
<description>Interrupt Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SYS</name>
<description>Interrupt Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID2</name>
<description>Interrupt Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID3</name>
<description>Interrupt Clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID4</name>
<description>Interrupt Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID5</name>
<description>Interrupt Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID6</name>
<description>Interrupt Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID7</name>
<description>Interrupt Clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID8</name>
<description>Interrupt Clear</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID9</name>
<description>Interrupt Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID10</name>
<description>Interrupt Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID11</name>
<description>Interrupt Clear</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID12</name>
<description>Interrupt Clear</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID13</name>
<description>Interrupt Clear</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID14</name>
<description>Interrupt Clear</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID15</name>
<description>Interrupt Clear</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID16</name>
<description>Interrupt Clear</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID17</name>
<description>Interrupt Clear</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID18</name>
<description>Interrupt Clear</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID19</name>
<description>Interrupt Clear</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID20</name>
<description>Interrupt Clear</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID21</name>
<description>Interrupt Clear</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID22</name>
<description>Interrupt Clear</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID23</name>
<description>Interrupt Clear</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID24</name>
<description>Interrupt Clear</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID25</name>
<description>Interrupt Clear</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID26</name>
<description>Interrupt Clear</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID27</name>
<description>Interrupt Clear</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID28</name>
<description>Interrupt Clear</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID29</name>
<description>Interrupt Clear</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID30</name>
<description>Interrupt Clear</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID31</name>
<description>Interrupt Clear</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ISCR</name>
<description>Interrupt Set Command Register</description>
<addressOffset>0x0000012C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>FIQ</name>
<description>Interrupt Set</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SYS</name>
<description>Interrupt Set</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID2</name>
<description>Interrupt Set</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID3</name>
<description>Interrupt Set</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID4</name>
<description>Interrupt Set</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID5</name>
<description>Interrupt Set</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID6</name>
<description>Interrupt Set</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID7</name>
<description>Interrupt Set</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID8</name>
<description>Interrupt Set</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID9</name>
<description>Interrupt Set</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID10</name>
<description>Interrupt Set</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID11</name>
<description>Interrupt Set</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID12</name>
<description>Interrupt Set</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID13</name>
<description>Interrupt Set</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID14</name>
<description>Interrupt Set</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID15</name>
<description>Interrupt Set</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID16</name>
<description>Interrupt Set</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID17</name>
<description>Interrupt Set</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID18</name>
<description>Interrupt Set</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID19</name>
<description>Interrupt Set</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID20</name>
<description>Interrupt Set</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID21</name>
<description>Interrupt Set</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID22</name>
<description>Interrupt Set</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID23</name>
<description>Interrupt Set</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID24</name>
<description>Interrupt Set</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID25</name>
<description>Interrupt Set</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID26</name>
<description>Interrupt Set</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID27</name>
<description>Interrupt Set</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID28</name>
<description>Interrupt Set</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID29</name>
<description>Interrupt Set</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID30</name>
<description>Interrupt Set</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID31</name>
<description>Interrupt Set</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>EOICR</name>
<description>End of Interrupt Command Register</description>
<addressOffset>0x00000130</addressOffset>
<size>32</size>
<access>write-only</access>
</register>
<register>
<name>SPU</name>
<description>Spurious Interrupt Vector Register</description>
<addressOffset>0x00000134</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SIVR</name>
<description>Spurious Interrupt Vector Register</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>DCR</name>
<description>Debug Control Register</description>
<addressOffset>0x00000138</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PROT</name>
<description>Protection Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>GMSK</name>
<description>General Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>FFER</name>
<description>Fast Forcing Enable Register</description>
<addressOffset>0x00000140</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SYS</name>
<description>Fast Forcing Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID2</name>
<description>Fast Forcing Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID3</name>
<description>Fast Forcing Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID4</name>
<description>Fast Forcing Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID5</name>
<description>Fast Forcing Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID6</name>
<description>Fast Forcing Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID7</name>
<description>Fast Forcing Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID8</name>
<description>Fast Forcing Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID9</name>
<description>Fast Forcing Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID10</name>
<description>Fast Forcing Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID11</name>
<description>Fast Forcing Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID12</name>
<description>Fast Forcing Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID13</name>
<description>Fast Forcing Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID14</name>
<description>Fast Forcing Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID15</name>
<description>Fast Forcing Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID16</name>
<description>Fast Forcing Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID17</name>
<description>Fast Forcing Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID18</name>
<description>Fast Forcing Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID19</name>
<description>Fast Forcing Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID20</name>
<description>Fast Forcing Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID21</name>
<description>Fast Forcing Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID22</name>
<description>Fast Forcing Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID23</name>
<description>Fast Forcing Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID24</name>
<description>Fast Forcing Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID25</name>
<description>Fast Forcing Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID26</name>
<description>Fast Forcing Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID27</name>
<description>Fast Forcing Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID28</name>
<description>Fast Forcing Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID29</name>
<description>Fast Forcing Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID30</name>
<description>Fast Forcing Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID31</name>
<description>Fast Forcing Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>FFDR</name>
<description>Fast Forcing Disable Register</description>
<addressOffset>0x00000144</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SYS</name>
<description>Fast Forcing Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID2</name>
<description>Fast Forcing Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID3</name>
<description>Fast Forcing Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID4</name>
<description>Fast Forcing Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID5</name>
<description>Fast Forcing Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID6</name>
<description>Fast Forcing Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID7</name>
<description>Fast Forcing Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID8</name>
<description>Fast Forcing Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID9</name>
<description>Fast Forcing Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID10</name>
<description>Fast Forcing Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID11</name>
<description>Fast Forcing Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID12</name>
<description>Fast Forcing Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID13</name>
<description>Fast Forcing Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID14</name>
<description>Fast Forcing Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID15</name>
<description>Fast Forcing Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID16</name>
<description>Fast Forcing Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID17</name>
<description>Fast Forcing Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID18</name>
<description>Fast Forcing Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID19</name>
<description>Fast Forcing Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID20</name>
<description>Fast Forcing Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID21</name>
<description>Fast Forcing Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID22</name>
<description>Fast Forcing Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID23</name>
<description>Fast Forcing Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID24</name>
<description>Fast Forcing Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID25</name>
<description>Fast Forcing Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID26</name>
<description>Fast Forcing Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID27</name>
<description>Fast Forcing Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID28</name>
<description>Fast Forcing Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID29</name>
<description>Fast Forcing Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID30</name>
<description>Fast Forcing Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID31</name>
<description>Fast Forcing Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>FFSR</name>
<description>Fast Forcing Status Register</description>
<addressOffset>0x00000148</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SYS</name>
<description>Fast Forcing Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID2</name>
<description>Fast Forcing Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID3</name>
<description>Fast Forcing Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID4</name>
<description>Fast Forcing Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID5</name>
<description>Fast Forcing Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID6</name>
<description>Fast Forcing Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID7</name>
<description>Fast Forcing Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID8</name>
<description>Fast Forcing Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID9</name>
<description>Fast Forcing Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID10</name>
<description>Fast Forcing Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID11</name>
<description>Fast Forcing Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID12</name>
<description>Fast Forcing Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID13</name>
<description>Fast Forcing Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID14</name>
<description>Fast Forcing Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID15</name>
<description>Fast Forcing Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID16</name>
<description>Fast Forcing Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID17</name>
<description>Fast Forcing Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID18</name>
<description>Fast Forcing Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID19</name>
<description>Fast Forcing Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID20</name>
<description>Fast Forcing Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID21</name>
<description>Fast Forcing Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID22</name>
<description>Fast Forcing Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID23</name>
<description>Fast Forcing Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID24</name>
<description>Fast Forcing Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID25</name>
<description>Fast Forcing Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID26</name>
<description>Fast Forcing Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID27</name>
<description>Fast Forcing Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID28</name>
<description>Fast Forcing Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID29</name>
<description>Fast Forcing Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID30</name>
<description>Fast Forcing Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID31</name>
<description>Fast Forcing Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PIOA</name>
<version>6057F</version>
<description>Parallel Input/Output Controller A</description>
<groupName>PIO</groupName>
<prependToName>PIOA_</prependToName>
<baseAddress>0xFFFFF200</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PIOA</name>
<value>2</value>
</interrupt>
<registers>
<register>
<name>PER</name>
<description>PIO Enable Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PDR</name>
<description>PIO Disable Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PSR</name>
<description>PIO Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OER</name>
<description>Output Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODR</name>
<description>Output Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OSR</name>
<description>Output Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IFER</name>
<description>Glitch Input Filter Enable Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFDR</name>
<description>Glitch Input Filter Disable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSR</name>
<description>Glitch Input Filter Status Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Filer Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filer Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filer Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filer Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filer Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filer Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filer Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filer Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filer Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filer Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filer Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filer Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filer Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filer Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filer Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filer Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filer Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filer Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filer Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filer Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filer Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filer Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filer Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filer Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filer Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filer Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filer Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filer Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filer Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filer Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SODR</name>
<description>Set Output Data Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Set Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Set Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Set Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Set Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Set Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Set Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Set Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Set Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Set Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Set Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Set Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Set Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Set Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Set Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Set Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Set Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Set Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Set Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Set Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Set Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Set Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Set Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Set Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Set Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Set Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Set Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Set Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Set Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Set Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Set Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Set Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Set Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CODR</name>
<description>Clear Output Data Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Clear Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Clear Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Clear Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Clear Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Clear Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Clear Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Clear Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Clear Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Clear Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Clear Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Clear Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Clear Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Clear Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Clear Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Clear Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Clear Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Clear Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Clear Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Clear Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Clear Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Clear Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Clear Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Clear Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Clear Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Clear Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Clear Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Clear Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Clear Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Clear Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Clear Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Clear Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Clear Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODSR</name>
<description>Output Data Status Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PDSR</name>
<description>Pin Data Status Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MDER</name>
<description>Multi-driver Enable Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDDR</name>
<description>Multi-driver Disable Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDSR</name>
<description>Multi-driver Status Register</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PUDR</name>
<description>Pull-up Disable Register</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUER</name>
<description>Pull-up Enable Register</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUSR</name>
<description>Pad Pull-up Status Register</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Pull Up Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ASR</name>
<description>Peripheral A Select Register</description>
<addressOffset>0x00000070</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Peripheral A Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral A Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral A Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral A Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral A Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral A Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral A Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral A Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral A Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral A Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral A Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral A Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral A Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral A Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral A Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral A Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral A Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral A Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral A Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral A Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral A Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral A Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral A Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral A Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral A Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral A Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral A Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral A Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral A Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral A Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral A Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral A Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BSR</name>
<description>Peripheral B Select Register</description>
<addressOffset>0x00000074</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Peripheral B Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral B Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral B Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral B Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral B Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral B Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral B Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral B Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral B Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral B Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral B Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral B Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral B Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral B Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral B Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral B Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral B Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral B Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral B Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral B Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral B Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral B Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral B Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral B Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral B Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral B Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral B Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral B Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral B Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral B Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral B Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral B Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ABSR</name>
<description>AB Status Register</description>
<addressOffset>0x00000078</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Peripheral A B Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral A B Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral A B Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral A B Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral A B Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral A B Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral A B Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral A B Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral A B Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral A B Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral A B Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral A B Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral A B Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral A B Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral A B Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral A B Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral A B Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral A B Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral A B Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral A B Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral A B Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral A B Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral A B Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral A B Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral A B Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral A B Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral A B Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral A B Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral A B Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral A B Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral A B Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral A B Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OWER</name>
<description>Output Write Enable</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWDR</name>
<description>Output Write Disable</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWSR</name>
<description>Output Write Status Register</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Write Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>DELAYR[%s]</name>
<description>I/O Delay Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>Delay0</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay1</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay2</name>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay3</name>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay4</name>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay5</name>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay6</name>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay7</name>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PIOB</name>
<version>6057F</version>
<description>Parallel Input/Output Controller B</description>
<groupName>PIO</groupName>
<prependToName>PIOB_</prependToName>
<baseAddress>0xFFFFF400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PIOB</name>
<value>3</value>
</interrupt>
<registers>
<register>
<name>PER</name>
<description>PIO Enable Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PDR</name>
<description>PIO Disable Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PSR</name>
<description>PIO Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OER</name>
<description>Output Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODR</name>
<description>Output Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OSR</name>
<description>Output Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IFER</name>
<description>Glitch Input Filter Enable Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFDR</name>
<description>Glitch Input Filter Disable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSR</name>
<description>Glitch Input Filter Status Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Filer Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filer Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filer Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filer Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filer Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filer Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filer Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filer Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filer Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filer Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filer Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filer Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filer Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filer Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filer Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filer Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filer Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filer Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filer Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filer Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filer Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filer Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filer Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filer Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filer Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filer Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filer Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filer Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filer Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filer Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SODR</name>
<description>Set Output Data Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Set Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Set Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Set Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Set Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Set Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Set Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Set Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Set Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Set Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Set Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Set Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Set Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Set Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Set Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Set Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Set Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Set Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Set Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Set Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Set Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Set Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Set Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Set Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Set Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Set Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Set Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Set Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Set Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Set Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Set Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Set Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Set Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CODR</name>
<description>Clear Output Data Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Clear Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Clear Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Clear Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Clear Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Clear Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Clear Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Clear Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Clear Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Clear Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Clear Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Clear Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Clear Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Clear Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Clear Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Clear Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Clear Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Clear Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Clear Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Clear Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Clear Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Clear Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Clear Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Clear Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Clear Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Clear Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Clear Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Clear Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Clear Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Clear Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Clear Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Clear Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Clear Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODSR</name>
<description>Output Data Status Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PDSR</name>
<description>Pin Data Status Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MDER</name>
<description>Multi-driver Enable Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDDR</name>
<description>Multi-driver Disable Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDSR</name>
<description>Multi-driver Status Register</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PUDR</name>
<description>Pull-up Disable Register</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUER</name>
<description>Pull-up Enable Register</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUSR</name>
<description>Pad Pull-up Status Register</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Pull Up Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ASR</name>
<description>Peripheral A Select Register</description>
<addressOffset>0x00000070</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Peripheral A Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral A Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral A Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral A Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral A Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral A Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral A Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral A Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral A Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral A Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral A Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral A Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral A Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral A Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral A Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral A Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral A Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral A Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral A Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral A Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral A Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral A Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral A Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral A Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral A Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral A Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral A Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral A Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral A Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral A Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral A Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral A Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BSR</name>
<description>Peripheral B Select Register</description>
<addressOffset>0x00000074</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Peripheral B Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral B Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral B Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral B Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral B Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral B Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral B Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral B Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral B Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral B Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral B Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral B Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral B Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral B Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral B Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral B Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral B Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral B Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral B Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral B Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral B Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral B Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral B Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral B Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral B Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral B Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral B Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral B Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral B Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral B Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral B Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral B Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ABSR</name>
<description>AB Status Register</description>
<addressOffset>0x00000078</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Peripheral A B Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral A B Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral A B Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral A B Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral A B Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral A B Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral A B Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral A B Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral A B Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral A B Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral A B Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral A B Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral A B Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral A B Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral A B Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral A B Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral A B Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral A B Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral A B Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral A B Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral A B Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral A B Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral A B Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral A B Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral A B Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral A B Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral A B Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral A B Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral A B Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral A B Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral A B Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral A B Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OWER</name>
<description>Output Write Enable</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWDR</name>
<description>Output Write Disable</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWSR</name>
<description>Output Write Status Register</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Write Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>DELAYR[%s]</name>
<description>I/O Delay Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>Delay0</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay1</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay2</name>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay3</name>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay4</name>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay5</name>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay6</name>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay7</name>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PIOC</name>
<version>6057F</version>
<description>Parallel Input/Output Controller C</description>
<groupName>PIO</groupName>
<prependToName>PIOC_</prependToName>
<baseAddress>0xFFFFF600</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PIOC</name>
<value>4</value>
</interrupt>
<registers>
<register>
<name>PER</name>
<description>PIO Enable Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PDR</name>
<description>PIO Disable Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PSR</name>
<description>PIO Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OER</name>
<description>Output Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODR</name>
<description>Output Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OSR</name>
<description>Output Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IFER</name>
<description>Glitch Input Filter Enable Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFDR</name>
<description>Glitch Input Filter Disable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSR</name>
<description>Glitch Input Filter Status Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Filer Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filer Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filer Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filer Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filer Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filer Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filer Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filer Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filer Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filer Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filer Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filer Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filer Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filer Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filer Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filer Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filer Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filer Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filer Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filer Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filer Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filer Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filer Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filer Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filer Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filer Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filer Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filer Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filer Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filer Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SODR</name>
<description>Set Output Data Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Set Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Set Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Set Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Set Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Set Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Set Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Set Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Set Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Set Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Set Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Set Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Set Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Set Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Set Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Set Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Set Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Set Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Set Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Set Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Set Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Set Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Set Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Set Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Set Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Set Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Set Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Set Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Set Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Set Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Set Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Set Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Set Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CODR</name>
<description>Clear Output Data Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Clear Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Clear Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Clear Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Clear Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Clear Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Clear Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Clear Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Clear Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Clear Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Clear Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Clear Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Clear Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Clear Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Clear Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Clear Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Clear Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Clear Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Clear Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Clear Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Clear Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Clear Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Clear Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Clear Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Clear Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Clear Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Clear Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Clear Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Clear Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Clear Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Clear Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Clear Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Clear Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODSR</name>
<description>Output Data Status Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PDSR</name>
<description>Pin Data Status Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MDER</name>
<description>Multi-driver Enable Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDDR</name>
<description>Multi-driver Disable Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDSR</name>
<description>Multi-driver Status Register</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PUDR</name>
<description>Pull-up Disable Register</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUER</name>
<description>Pull-up Enable Register</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUSR</name>
<description>Pad Pull-up Status Register</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Pull Up Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ASR</name>
<description>Peripheral A Select Register</description>
<addressOffset>0x00000070</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Peripheral A Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral A Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral A Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral A Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral A Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral A Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral A Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral A Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral A Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral A Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral A Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral A Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral A Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral A Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral A Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral A Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral A Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral A Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral A Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral A Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral A Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral A Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral A Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral A Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral A Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral A Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral A Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral A Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral A Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral A Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral A Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral A Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BSR</name>
<description>Peripheral B Select Register</description>
<addressOffset>0x00000074</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Peripheral B Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral B Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral B Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral B Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral B Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral B Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral B Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral B Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral B Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral B Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral B Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral B Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral B Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral B Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral B Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral B Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral B Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral B Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral B Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral B Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral B Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral B Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral B Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral B Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral B Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral B Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral B Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral B Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral B Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral B Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral B Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral B Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ABSR</name>
<description>AB Status Register</description>
<addressOffset>0x00000078</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Peripheral A B Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral A B Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral A B Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral A B Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral A B Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral A B Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral A B Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral A B Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral A B Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral A B Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral A B Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral A B Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral A B Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral A B Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral A B Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral A B Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral A B Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral A B Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral A B Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral A B Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral A B Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral A B Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral A B Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral A B Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral A B Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral A B Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral A B Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral A B Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral A B Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral A B Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral A B Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral A B Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OWER</name>
<description>Output Write Enable</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWDR</name>
<description>Output Write Disable</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWSR</name>
<description>Output Write Status Register</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Write Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>DELAYR[%s]</name>
<description>I/O Delay Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>Delay0</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay1</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay2</name>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay3</name>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay4</name>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay5</name>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay6</name>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay7</name>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PIOD</name>
<version>6057F</version>
<description>Parallel Input/Output Controller D</description>
<groupName>PIO</groupName>
<prependToName>PIOD_</prependToName>
<baseAddress>0xFFFFF800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PIOD</name>
<value>5</value>
</interrupt>
<registers>
<register>
<name>PER</name>
<description>PIO Enable Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PDR</name>
<description>PIO Disable Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PSR</name>
<description>PIO Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OER</name>
<description>Output Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODR</name>
<description>Output Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OSR</name>
<description>Output Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IFER</name>
<description>Glitch Input Filter Enable Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFDR</name>
<description>Glitch Input Filter Disable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSR</name>
<description>Glitch Input Filter Status Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Filer Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filer Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filer Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filer Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filer Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filer Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filer Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filer Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filer Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filer Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filer Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filer Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filer Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filer Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filer Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filer Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filer Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filer Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filer Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filer Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filer Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filer Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filer Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filer Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filer Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filer Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filer Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filer Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filer Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filer Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SODR</name>
<description>Set Output Data Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Set Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Set Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Set Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Set Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Set Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Set Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Set Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Set Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Set Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Set Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Set Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Set Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Set Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Set Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Set Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Set Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Set Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Set Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Set Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Set Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Set Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Set Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Set Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Set Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Set Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Set Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Set Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Set Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Set Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Set Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Set Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Set Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CODR</name>
<description>Clear Output Data Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Clear Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Clear Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Clear Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Clear Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Clear Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Clear Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Clear Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Clear Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Clear Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Clear Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Clear Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Clear Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Clear Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Clear Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Clear Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Clear Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Clear Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Clear Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Clear Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Clear Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Clear Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Clear Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Clear Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Clear Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Clear Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Clear Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Clear Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Clear Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Clear Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Clear Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Clear Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Clear Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODSR</name>
<description>Output Data Status Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PDSR</name>
<description>Pin Data Status Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MDER</name>
<description>Multi-driver Enable Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDDR</name>
<description>Multi-driver Disable Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDSR</name>
<description>Multi-driver Status Register</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PUDR</name>
<description>Pull-up Disable Register</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUER</name>
<description>Pull-up Enable Register</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUSR</name>
<description>Pad Pull-up Status Register</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Pull Up Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ASR</name>
<description>Peripheral A Select Register</description>
<addressOffset>0x00000070</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Peripheral A Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral A Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral A Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral A Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral A Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral A Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral A Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral A Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral A Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral A Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral A Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral A Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral A Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral A Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral A Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral A Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral A Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral A Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral A Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral A Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral A Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral A Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral A Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral A Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral A Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral A Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral A Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral A Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral A Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral A Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral A Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral A Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BSR</name>
<description>Peripheral B Select Register</description>
<addressOffset>0x00000074</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Peripheral B Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral B Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral B Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral B Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral B Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral B Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral B Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral B Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral B Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral B Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral B Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral B Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral B Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral B Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral B Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral B Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral B Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral B Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral B Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral B Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral B Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral B Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral B Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral B Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral B Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral B Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral B Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral B Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral B Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral B Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral B Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral B Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ABSR</name>
<description>AB Status Register</description>
<addressOffset>0x00000078</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Peripheral A B Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral A B Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral A B Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral A B Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral A B Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral A B Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral A B Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral A B Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral A B Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral A B Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral A B Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral A B Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral A B Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral A B Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral A B Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral A B Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral A B Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral A B Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral A B Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral A B Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral A B Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral A B Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral A B Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral A B Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral A B Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral A B Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral A B Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral A B Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral A B Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral A B Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral A B Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral A B Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OWER</name>
<description>Output Write Enable</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWDR</name>
<description>Output Write Disable</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWSR</name>
<description>Output Write Status Register</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Write Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>DELAYR[%s]</name>
<description>I/O Delay Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>Delay0</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay1</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay2</name>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay3</name>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay4</name>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay5</name>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay6</name>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay7</name>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PIOE</name>
<version>6057F</version>
<description>Parallel Input/Output Controller E</description>
<groupName>PIO</groupName>
<prependToName>PIOE_</prependToName>
<baseAddress>0xFFFFFA00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>PER</name>
<description>PIO Enable Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PDR</name>
<description>PIO Disable Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PSR</name>
<description>PIO Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>PIO Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>PIO Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>PIO Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>PIO Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>PIO Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>PIO Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>PIO Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>PIO Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>PIO Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>PIO Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>PIO Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>PIO Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>PIO Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>PIO Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>PIO Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>PIO Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>PIO Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>PIO Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>PIO Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>PIO Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>PIO Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>PIO Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>PIO Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>PIO Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>PIO Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>PIO Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>PIO Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>PIO Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>PIO Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>PIO Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>PIO Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>PIO Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OER</name>
<description>Output Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODR</name>
<description>Output Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OSR</name>
<description>Output Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IFER</name>
<description>Glitch Input Filter Enable Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFDR</name>
<description>Glitch Input Filter Disable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Filter Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filter Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filter Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filter Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filter Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filter Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filter Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filter Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filter Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filter Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filter Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filter Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filter Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filter Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filter Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filter Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filter Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filter Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filter Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filter Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filter Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filter Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filter Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filter Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filter Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filter Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filter Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filter Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filter Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filter Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filter Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filter Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IFSR</name>
<description>Glitch Input Filter Status Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Filer Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Filer Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Filer Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Filer Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Filer Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Filer Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Filer Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Filer Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Filer Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Filer Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Filer Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Filer Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Filer Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Filer Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Filer Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Filer Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Filer Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Filer Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Filer Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Filer Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Filer Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Filer Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Filer Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Filer Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Filer Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Filer Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Filer Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Filer Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Filer Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Filer Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Filer Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Filer Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SODR</name>
<description>Set Output Data Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Set Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Set Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Set Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Set Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Set Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Set Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Set Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Set Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Set Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Set Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Set Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Set Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Set Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Set Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Set Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Set Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Set Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Set Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Set Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Set Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Set Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Set Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Set Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Set Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Set Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Set Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Set Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Set Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Set Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Set Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Set Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Set Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CODR</name>
<description>Clear Output Data Register</description>
<addressOffset>0x00000034</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Clear Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Clear Output Data</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Clear Output Data</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Clear Output Data</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Clear Output Data</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Clear Output Data</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Clear Output Data</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Clear Output Data</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Clear Output Data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Clear Output Data</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Clear Output Data</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Clear Output Data</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Clear Output Data</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Clear Output Data</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Clear Output Data</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Clear Output Data</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Clear Output Data</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Clear Output Data</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Clear Output Data</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Clear Output Data</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Clear Output Data</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Clear Output Data</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Clear Output Data</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Clear Output Data</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Clear Output Data</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Clear Output Data</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Clear Output Data</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Clear Output Data</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Clear Output Data</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Clear Output Data</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Clear Output Data</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Clear Output Data</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ODSR</name>
<description>Output Data Status Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PDSR</name>
<description>Pin Data Status Register</description>
<addressOffset>0x0000003C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Data Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Data Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Data Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Data Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Data Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Data Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Data Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Data Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Data Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Data Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Data Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Data Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Data Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Data Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Data Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Data Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Data Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Data Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Data Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Data Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Data Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Data Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Data Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Data Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Data Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Data Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Data Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Data Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Data Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Data Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Data Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Data Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000044</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000048</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Mask</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x0000004C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Input Change Interrupt Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Input Change Interrupt Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Input Change Interrupt Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Input Change Interrupt Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Input Change Interrupt Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Input Change Interrupt Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Input Change Interrupt Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Input Change Interrupt Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Input Change Interrupt Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Input Change Interrupt Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Input Change Interrupt Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Input Change Interrupt Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Input Change Interrupt Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Input Change Interrupt Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Input Change Interrupt Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Input Change Interrupt Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Input Change Interrupt Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Input Change Interrupt Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Input Change Interrupt Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Input Change Interrupt Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Input Change Interrupt Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Input Change Interrupt Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Input Change Interrupt Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Input Change Interrupt Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Input Change Interrupt Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Input Change Interrupt Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Input Change Interrupt Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Input Change Interrupt Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Input Change Interrupt Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Input Change Interrupt Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Input Change Interrupt Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Input Change Interrupt Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MDER</name>
<description>Multi-driver Enable Register</description>
<addressOffset>0x00000050</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDDR</name>
<description>Multi-driver Disable Register</description>
<addressOffset>0x00000054</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MDSR</name>
<description>Multi-driver Status Register</description>
<addressOffset>0x00000058</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Multi Drive Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Multi Drive Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Multi Drive Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Multi Drive Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Multi Drive Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Multi Drive Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Multi Drive Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Multi Drive Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Multi Drive Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Multi Drive Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Multi Drive Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Multi Drive Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Multi Drive Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Multi Drive Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Multi Drive Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Multi Drive Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Multi Drive Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Multi Drive Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Multi Drive Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Multi Drive Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Multi Drive Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Multi Drive Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Multi Drive Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Multi Drive Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Multi Drive Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Multi Drive Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Multi Drive Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Multi Drive Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Multi Drive Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Multi Drive Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Multi Drive Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Multi Drive Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PUDR</name>
<description>Pull-up Disable Register</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUER</name>
<description>Pull-up Enable Register</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Pull Up Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PUSR</name>
<description>Pad Pull-up Status Register</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Pull Up Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Pull Up Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Pull Up Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Pull Up Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Pull Up Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Pull Up Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Pull Up Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Pull Up Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Pull Up Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Pull Up Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Pull Up Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Pull Up Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Pull Up Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Pull Up Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Pull Up Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Pull Up Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Pull Up Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Pull Up Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Pull Up Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Pull Up Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Pull Up Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Pull Up Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Pull Up Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Pull Up Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Pull Up Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Pull Up Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Pull Up Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Pull Up Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Pull Up Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Pull Up Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Pull Up Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Pull Up Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ASR</name>
<description>Peripheral A Select Register</description>
<addressOffset>0x00000070</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Peripheral A Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral A Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral A Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral A Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral A Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral A Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral A Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral A Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral A Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral A Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral A Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral A Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral A Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral A Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral A Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral A Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral A Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral A Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral A Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral A Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral A Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral A Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral A Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral A Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral A Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral A Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral A Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral A Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral A Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral A Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral A Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral A Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>BSR</name>
<description>Peripheral B Select Register</description>
<addressOffset>0x00000074</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Peripheral B Select.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral B Select.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral B Select.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral B Select.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral B Select.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral B Select.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral B Select.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral B Select.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral B Select.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral B Select.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral B Select.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral B Select.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral B Select.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral B Select.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral B Select.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral B Select.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral B Select.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral B Select.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral B Select.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral B Select.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral B Select.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral B Select.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral B Select.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral B Select.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral B Select.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral B Select.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral B Select.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral B Select.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral B Select.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral B Select.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral B Select.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral B Select.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>ABSR</name>
<description>AB Status Register</description>
<addressOffset>0x00000078</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Peripheral A B Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Peripheral A B Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Peripheral A B Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Peripheral A B Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Peripheral A B Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Peripheral A B Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Peripheral A B Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Peripheral A B Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Peripheral A B Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Peripheral A B Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Peripheral A B Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Peripheral A B Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Peripheral A B Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Peripheral A B Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Peripheral A B Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Peripheral A B Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Peripheral A B Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Peripheral A B Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Peripheral A B Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Peripheral A B Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Peripheral A B Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Peripheral A B Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Peripheral A B Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Peripheral A B Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Peripheral A B Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Peripheral A B Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Peripheral A B Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Peripheral A B Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Peripheral A B Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Peripheral A B Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Peripheral A B Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Peripheral A B Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>OWER</name>
<description>Output Write Enable</description>
<addressOffset>0x000000A0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Enable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Enable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Enable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Enable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Enable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Enable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Enable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Enable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Enable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Enable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Enable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Enable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Enable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Enable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Enable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Enable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Enable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Enable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Enable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Enable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Enable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Enable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Enable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Enable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Enable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Enable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Enable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Enable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Enable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Enable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Enable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Enable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWDR</name>
<description>Output Write Disable</description>
<addressOffset>0x000000A4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>P0</name>
<description>Output Write Disable.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Disable.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Disable.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Disable.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Disable.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Disable.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Disable.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Disable.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Disable.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Disable.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Disable.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Disable.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Disable.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Disable.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Disable.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Disable.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Disable.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Disable.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Disable.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Disable.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Disable.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Disable.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Disable.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Disable.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Disable.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Disable.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Disable.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Disable.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Disable.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Disable.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Disable.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Disable.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>OWSR</name>
<description>Output Write Status Register</description>
<addressOffset>0x000000A8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>P0</name>
<description>Output Write Status.</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P1</name>
<description>Output Write Status.</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P2</name>
<description>Output Write Status.</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P3</name>
<description>Output Write Status.</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P4</name>
<description>Output Write Status.</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P5</name>
<description>Output Write Status.</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P6</name>
<description>Output Write Status.</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P7</name>
<description>Output Write Status.</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P8</name>
<description>Output Write Status.</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P9</name>
<description>Output Write Status.</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P10</name>
<description>Output Write Status.</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P11</name>
<description>Output Write Status.</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P12</name>
<description>Output Write Status.</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P13</name>
<description>Output Write Status.</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P14</name>
<description>Output Write Status.</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P15</name>
<description>Output Write Status.</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P16</name>
<description>Output Write Status.</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P17</name>
<description>Output Write Status.</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P18</name>
<description>Output Write Status.</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P19</name>
<description>Output Write Status.</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P20</name>
<description>Output Write Status.</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P21</name>
<description>Output Write Status.</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P22</name>
<description>Output Write Status.</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P23</name>
<description>Output Write Status.</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P24</name>
<description>Output Write Status.</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P25</name>
<description>Output Write Status.</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P26</name>
<description>Output Write Status.</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P27</name>
<description>Output Write Status.</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P28</name>
<description>Output Write Status.</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P29</name>
<description>Output Write Status.</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P30</name>
<description>Output Write Status.</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>P31</name>
<description>Output Write Status.</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-3</dimIndex>
<name>DELAYR[%s]</name>
<description>I/O Delay Register</description>
<addressOffset>0x000000C0</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>Delay0</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay1</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay2</name>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay3</name>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay4</name>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay5</name>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay6</name>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>Delay7</name>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protect Mode Register</description>
<addressOffset>0x000000E4</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WPKEY</name>
<description>Write Protect KEY</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protect Status Register</description>
<addressOffset>0x000000E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protect Violation Source</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PMC</name>
<version>6357A</version>
<description>Power Management Controller</description>
<baseAddress>0xFFFFFC00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x100</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>PMC_SCER</name>
<description>System Clock Enable Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>DDRCK</name>
<description>DDR Clock Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UHP</name>
<description>USB Host OHCI Clocks Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCK0</name>
<description>Programmable Clock 0 Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCK1</name>
<description>Programmable Clock 1 Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_SCDR</name>
<description>System Clock Disable Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>PCK</name>
<description>Processor Clock Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DDRCK</name>
<description>DDR Clock Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>UHP</name>
<description>USB Host OHCI Clock Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCK0</name>
<description>Programmable Clock 0 Output Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCK1</name>
<description>Programmable Clock 1 Output Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_SCSR</name>
<description>System Clock Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>PCK</name>
<description>Processor Clock Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DDRCK</name>
<description>DDR Clock Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UHP</name>
<description>USB Host Port Clock Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCK0</name>
<description>Programmable Clock 0 Output Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCK1</name>
<description>Programmable Clock 1 Output Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_PCER</name>
<description>Peripheral Clock Enable Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>PID2</name>
<description>Peripheral Clock 2 Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID3</name>
<description>Peripheral Clock 3 Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID4</name>
<description>Peripheral Clock 4 Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID5</name>
<description>Peripheral Clock 5 Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID6</name>
<description>Peripheral Clock 6 Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID7</name>
<description>Peripheral Clock 7 Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID8</name>
<description>Peripheral Clock 8 Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID9</name>
<description>Peripheral Clock 9 Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID10</name>
<description>Peripheral Clock 10 Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID11</name>
<description>Peripheral Clock 11 Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID12</name>
<description>Peripheral Clock 12 Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID13</name>
<description>Peripheral Clock 13 Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID14</name>
<description>Peripheral Clock 14 Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID15</name>
<description>Peripheral Clock 15 Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID16</name>
<description>Peripheral Clock 16 Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID17</name>
<description>Peripheral Clock 17 Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID18</name>
<description>Peripheral Clock 18 Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID19</name>
<description>Peripheral Clock 19 Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID20</name>
<description>Peripheral Clock 20 Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID21</name>
<description>Peripheral Clock 21 Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID22</name>
<description>Peripheral Clock 22 Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID23</name>
<description>Peripheral Clock 23 Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID24</name>
<description>Peripheral Clock 24 Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID25</name>
<description>Peripheral Clock 25 Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID26</name>
<description>Peripheral Clock 26 Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID27</name>
<description>Peripheral Clock 27 Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID28</name>
<description>Peripheral Clock 28 Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID29</name>
<description>Peripheral Clock 29 Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID30</name>
<description>Peripheral Clock 30 Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID31</name>
<description>Peripheral Clock 31 Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_PCDR</name>
<description>Peripheral Clock Disable Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>PID2</name>
<description>Peripheral Clock 2 Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID3</name>
<description>Peripheral Clock 3 Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID4</name>
<description>Peripheral Clock 4 Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID5</name>
<description>Peripheral Clock 5 Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID6</name>
<description>Peripheral Clock 6 Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID7</name>
<description>Peripheral Clock 7 Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID8</name>
<description>Peripheral Clock 8 Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID9</name>
<description>Peripheral Clock 9 Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID10</name>
<description>Peripheral Clock 10 Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID11</name>
<description>Peripheral Clock 11 Disable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID12</name>
<description>Peripheral Clock 12 Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID13</name>
<description>Peripheral Clock 13 Disable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID14</name>
<description>Peripheral Clock 14 Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID15</name>
<description>Peripheral Clock 15 Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID16</name>
<description>Peripheral Clock 16 Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID17</name>
<description>Peripheral Clock 17 Disable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID18</name>
<description>Peripheral Clock 18 Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID19</name>
<description>Peripheral Clock 19 Disable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID20</name>
<description>Peripheral Clock 20 Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID21</name>
<description>Peripheral Clock 21 Disable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID22</name>
<description>Peripheral Clock 22 Disable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID23</name>
<description>Peripheral Clock 23 Disable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID24</name>
<description>Peripheral Clock 24 Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID25</name>
<description>Peripheral Clock 25 Disable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID26</name>
<description>Peripheral Clock 26 Disable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID27</name>
<description>Peripheral Clock 27 Disable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID28</name>
<description>Peripheral Clock 28 Disable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID29</name>
<description>Peripheral Clock 29 Disable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID30</name>
<description>Peripheral Clock 30 Disable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PID31</name>
<description>Peripheral Clock 31 Disable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_PCSR</name>
<description>Peripheral Clock Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PID2</name>
<description>Peripheral Clock 2 Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID3</name>
<description>Peripheral Clock 3 Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID4</name>
<description>Peripheral Clock 4 Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID5</name>
<description>Peripheral Clock 5 Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID6</name>
<description>Peripheral Clock 6 Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID7</name>
<description>Peripheral Clock 7 Status</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID8</name>
<description>Peripheral Clock 8 Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID9</name>
<description>Peripheral Clock 9 Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID10</name>
<description>Peripheral Clock 10 Status</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID11</name>
<description>Peripheral Clock 11 Status</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID12</name>
<description>Peripheral Clock 12 Status</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID13</name>
<description>Peripheral Clock 13 Status</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID14</name>
<description>Peripheral Clock 14 Status</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID15</name>
<description>Peripheral Clock 15 Status</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID16</name>
<description>Peripheral Clock 16 Status</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID17</name>
<description>Peripheral Clock 17 Status</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID18</name>
<description>Peripheral Clock 18 Status</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID19</name>
<description>Peripheral Clock 19 Status</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID20</name>
<description>Peripheral Clock 20 Status</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID21</name>
<description>Peripheral Clock 21 Status</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID22</name>
<description>Peripheral Clock 22 Status</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID23</name>
<description>Peripheral Clock 23 Status</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID24</name>
<description>Peripheral Clock 24 Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID25</name>
<description>Peripheral Clock 25 Status</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID26</name>
<description>Peripheral Clock 26 Status</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID27</name>
<description>Peripheral Clock 27 Status</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID28</name>
<description>Peripheral Clock 28 Status</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID29</name>
<description>Peripheral Clock 29 Status</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID30</name>
<description>Peripheral Clock 30 Status</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PID31</name>
<description>Peripheral Clock 31 Status</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CKGR_UCKR</name>
<description>UTMI Clock Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x10200800</resetValue>
<fields>
<field>
<name>UPLLEN</name>
<description>UTMI PLL Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PLLCOUNT</name>
<description>UTMI PLL Start-up Time</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BIASEN</name>
<description>UTMI BIAS Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>BIASCOUNT</name>
<description>UTMI BIAS Start-up Time</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CKGR_MOR</name>
<description>Main Oscillator Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MOSCEN</name>
<description>Main Oscillator Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OSCBYPASS</name>
<description>Oscillator Bypass</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OSCOUNT</name>
<description>Main Oscillator Start-up Time</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CKGR_MCFR</name>
<description>Main Clock Frequency Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAINF</name>
<description>Main Clock Frequency</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MAINRDY</name>
<description>Main Clock Ready</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CKGR_PLLAR</name>
<description>PLLA Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00003F00</resetValue>
<fields>
<field>
<name>DIVA</name>
<description>Divider A</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PLLACOUNT</name>
<description>PLLA Counter</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>OUTA</name>
<description>PLLA Clock Frequency Range</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MULA</name>
<description>PLLA Multiplier</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>STUCKTO1</name>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PMC_MCKR</name>
<description>Master Clock Register</description>
<addressOffset>0x00000030</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CSS</name>
<description>Master/Processor Clock Source Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PRES</name>
<description>Master/Processor Clock Prescaler</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MDIV</name>
<description>Master Clock Division</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PLLADIV2</name>
<description>PLLA divisor by 2</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PMC_USB</name>
<description>USB Clock Register</description>
<addressOffset>0x00000038</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>USBS</name>
<description>USB OHCI Input clock selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>USBDIV</name>
<description>Divider for USB OHCI Clock.</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<dimIndex>0-1</dimIndex>
<name>PMC_PCK[%s]</name>
<description>Programmable Clock 0 Register</description>
<addressOffset>0x00000040</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>CSS</name>
<description>Master Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PRES</name>
<description>Programmable Clock Prescaler</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SLCKMCK</name>
<description>Slow Clock or Master Clock Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>PMC_IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000060</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>MOSCS</name>
<description>Main Oscillator Status Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOCKA</name>
<description>PLL Lock Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MCKRDY</name>
<description>Master Clock Ready Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOCKU</name>
<description>UTMI PLL Lock Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCKRDY0</name>
<description>Programmable Clock Ready 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCKRDY1</name>
<description>Programmable Clock Ready 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000064</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>MOSCS</name>
<description>Main Oscillator Status Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOCKA</name>
<description>PLLA Lock Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MCKRDY</name>
<description>Master Clock Ready Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>LOCKU</name>
<description>UTMI PLL Lock Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCKRDY0</name>
<description>Programmable Clock Ready 0 Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PCKRDY1</name>
<description>Programmable Clock Ready 1 Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_SR</name>
<description>Status Register</description>
<addressOffset>0x00000068</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000008</resetValue>
<fields>
<field>
<name>MOSCS</name>
<description>MOSCS Flag Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOCKA</name>
<description>PLLA Lock Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MCKRDY</name>
<description>Master Clock Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOCKU</name>
<description>UPLL Lock Status</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCKRDY0</name>
<description>Programmable Clock Ready Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCKRDY1</name>
<description>Programmable Clock Ready Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PMC_IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x0000006C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MOSCS</name>
<description>Main Oscillator Status Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOCKA</name>
<description>PLLA Lock Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MCKRDY</name>
<description>Master Clock Ready Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOCKU</name>
<description>UTMI PLL Lock Interrupt Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCKRDY0</name>
<description>Programmable Clock Ready 0 Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PCKRDY1</name>
<description>Programmable Clock Ready 1 Interrupt Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RSTC</name>
<version>6098I</version>
<description>Reset Controller</description>
<groupName>SYSC</groupName>
<prependToName>RSTC_</prependToName>
<baseAddress>0xFFFFFD00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>PROCRST</name>
<description>Processor Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PERRST</name>
<description>Peripheral Reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>EXTRST</name>
<description>External Reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>KEY</name>
<description>Password</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>URSTS</name>
<description>User Reset Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RSTTYP</name>
<description>Reset Type</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NRSTL</name>
<description>NRST Pin Level</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SRCMP</name>
<description>Software Reset Command in Progress</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>URSTEN</name>
<description>User Reset Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>URSTIEN</name>
<description>User Reset Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ERSTL</name>
<description>External Reset Length</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>KEY</name>
<description>Password</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SHDWC</name>
<version>6122J</version>
<description>Shutdown Controller</description>
<groupName>SYSC</groupName>
<prependToName>SHDWC_</prependToName>
<baseAddress>0xFFFFFD10</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR</name>
<description>Shutdown Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>SHDW</name>
<description>Shutdown Command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>KEY</name>
<description>Password</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Shutdown Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000003</resetValue>
<fields>
<field>
<name>WKMODE0</name>
<description>Wake-up Mode 0</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
</field>
<field>
<name>CPTWK0</name>
<description>Counter on Wake-up 0</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RTTWKEN</name>
<description>Real-time Timer Wake-up Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RTCWKEN</name>
<description>Real-time Clock Wake-up Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Shutdown Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WAKEUP0</name>
<description>Wake-up 0 Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RTTWK</name>
<description>Real-time Timer Wake-up</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RTCWK</name>
<description>Real-time Clock Wake-up</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RTT</name>
<version>6081D</version>
<description>Real-time Timer</description>
<groupName>SYSC</groupName>
<prependToName>RTT_</prependToName>
<baseAddress>0xFFFFFD20</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00008000</resetValue>
<fields>
<field>
<name>RTPRES</name>
<description>Real-time Timer Prescaler Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-write</access>
</field>
<field>
<name>ALMIEN</name>
<description>Alarm Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RTTINCIEN</name>
<description>Real-time Timer Increment Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>RTTRST</name>
<description>Real-time Timer Restart</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>AR</name>
<description>Alarm Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>ALMV</name>
<description>Alarm Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>VR</name>
<description>Value Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRTV</name>
<description>Current Real-time Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ALMS</name>
<description>Real-time Alarm Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RTTINC</name>
<description>Real-time Timer Increment</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PIT</name>
<version>6079B</version>
<description>Periodic Interval Timer</description>
<groupName>SYSC</groupName>
<prependToName>PIT_</prependToName>
<baseAddress>0xFFFFFD30</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x000FFFFF</resetValue>
<fields>
<field>
<name>PIV</name>
<description>Periodic Interval Value</description>
<bitOffset>0</bitOffset>
<bitWidth>20</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PITEN</name>
<description>Period Interval Timer Enabled</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>PITIEN</name>
<description>Periodic Interval Timer Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PITS</name>
<description>Periodic Interval Timer Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PIVR</name>
<description>Periodic Interval Value Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPIV</name>
<description>Current Periodic Interval Value</description>
<bitOffset>0</bitOffset>
<bitWidth>20</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PICNT</name>
<description>Periodic Interval Counter</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PIIR</name>
<description>Periodic Interval Image Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPIV</name>
<description>Current Periodic Interval Value</description>
<bitOffset>0</bitOffset>
<bitWidth>20</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PICNT</name>
<description>Periodic Interval Counter</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>WDT</name>
<version>6080B</version>
<description>Watchdog Timer</description>
<groupName>SYSC</groupName>
<prependToName>WDT_</prependToName>
<baseAddress>0xFFFFFD40</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>WDRSTT</name>
<description>Watchdog Restart</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>KEY</name>
<description>Password</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x3FFF2FFF</resetValue>
<fields>
<field>
<name>WDV</name>
<description>Watchdog Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDFIEN</name>
<description>Watchdog Fault Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDRSTEN</name>
<description>Watchdog Reset Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDRPROC</name>
<description>Watchdog Reset Processor</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDDIS</name>
<description>Watchdog Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDD</name>
<description>Watchdog Delta Value</description>
<bitOffset>16</bitOffset>
<bitWidth>12</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDDBGHLT</name>
<description>Watchdog Debug Halt</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>WDIDLEHLT</name>
<description>Watchdog Idle Halt</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WDUNF</name>
<description>Watchdog Underflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WDERR</name>
<description>Watchdog Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>GPBR</name>
<version>6378A</version>
<description>General Purpose Backup Register</description>
<groupName>SYSC</groupName>
<prependToName>GPBR_</prependToName>
<baseAddress>0xFFFFFD60</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>GPBR0</name>
<description>General Purpose Backup Register 0</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>GPBR_VALUE0</name>
<description>Value of GPBR x</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>GPBR1</name>
<description>General Purpose Backup Register 1</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>GPBR_VALUE1</name>
<description>Value of GPBR x</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>GPBR2</name>
<description>General Purpose Backup Register 2</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>GPBR_VALUE2</name>
<description>Value of GPBR x</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>GPBR3</name>
<description>General Purpose Backup Register 3</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<fields>
<field>
<name>GPBR_VALUE3</name>
<description>Value of GPBR x</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RTC</name>
<version>6056H</version>
<description>Real-time Clock</description>
<prependToName>RTC_</prependToName>
<baseAddress>0xFFFFFDB0</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x30</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR</name>
<description>Control Register</description>
<addressOffset>0x00000000</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>UPDTIM</name>
<description>Update Request Time Register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>UPDCAL</name>
<description>Update Request Calendar Register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>TIMEVSEL</name>
<description>Time Event Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>MINUTE</name>
<description>Minute change</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HOUR</name>
<description>Hour change</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MIDNIGHT</name>
<description>Every day at midnight</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>NOON</name>
<description>Every day at noon</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CALEVSEL</name>
<description>Calendar Event Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>read-write</access>
<enumeratedValues>
<enumeratedValue>
<name>WEEK</name>
<description>Week change (every Monday at time 00:00:00)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MONTH</name>
<description>Month change (every 01 of each month at time 00:00:00)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>YEAR</name>
<description>Year change (every January 1 at time 00:00:00)</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x00000004</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HRMOD</name>
<description>12-/24-hour Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TIMR</name>
<description>Time Register</description>
<addressOffset>0x00000008</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEC</name>
<description>Current Second</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MIN</name>
<description>Current Minute</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HOUR</name>
<description>Current Hour</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AMPM</name>
<description>Ante Meridiem Post Meridiem Indicator</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CALR</name>
<description>Calendar Register</description>
<addressOffset>0x0000000C</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01210720</resetValue>
<fields>
<field>
<name>CENT</name>
<description>Current Century</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>YEAR</name>
<description>Current Year</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MONTH</name>
<description>Current Month</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DAY</name>
<description>Current Day in Current Week</description>
<bitOffset>21</bitOffset>
<bitWidth>3</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATE</name>
<description>Current Day in Current Month</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>TIMALR</name>
<description>Time Alarm Register</description>
<addressOffset>0x00000010</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SEC</name>
<description>Second Alarm</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>SECEN</name>
<description>Second Alarm Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MIN</name>
<description>Minute Alarm</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MINEN</name>
<description>Minute Alarm Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HOUR</name>
<description>Hour Alarm</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>AMPM</name>
<description>AM/PM Indicator</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>HOUREN</name>
<description>Hour Alarm Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>CALALR</name>
<description>Calendar Alarm Register</description>
<addressOffset>0x00000014</addressOffset>
<size>32</size>
<access>read-write</access>
<resetValue>0x01010000</resetValue>
<fields>
<field>
<name>MONTH</name>
<description>Month Alarm</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
<access>read-write</access>
</field>
<field>
<name>MTHEN</name>
<description>Month Alarm Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATE</name>
<description>Date Alarm</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
<access>read-write</access>
</field>
<field>
<name>DATEEN</name>
<description>Date Alarm Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<access>read-write</access>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status Register</description>
<addressOffset>0x00000018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ACKUPD</name>
<description>Acknowledge for Update</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ALARM</name>
<description>Alarm Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SEC</name>
<description>Second Event</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIMEV</name>
<description>Time Event</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CALEV</name>
<description>Calendar Event</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SCCR</name>
<description>Status Clear Command Register</description>
<addressOffset>0x0000001C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>ACKCLR</name>
<description>Acknowledge Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ALRCLR</name>
<description>Alarm Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SECCLR</name>
<description>Second Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMCLR</name>
<description>Time Clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CALCLR</name>
<description>Calendar Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x00000020</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>ACKEN</name>
<description>Acknowledge Update Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ALREN</name>
<description>Alarm Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SECEN</name>
<description>Second Event Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMEN</name>
<description>Time Event Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CALEN</name>
<description>Calendar Event Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x00000024</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>ACKDIS</name>
<description>Acknowledge Update Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ALRDIS</name>
<description>Alarm Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SECDIS</name>
<description>Second Event Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>TIMDIS</name>
<description>Time Event Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CALDIS</name>
<description>Calendar Event Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0x00000028</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ACK</name>
<description>Acknowledge Update Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ALR</name>
<description>Alarm Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SEC</name>
<description>Second Event Interrupt Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TIM</name>
<description>Time Event Interrupt Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CAL</name>
<description>Calendar Event Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>VER</name>
<description>Valid Entry Register</description>
<addressOffset>0x0000002C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NVTIM</name>
<description>Non-valid Time</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NVCAL</name>
<description>Non-valid Calendar</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NVTIMALR</name>
<description>Non-valid Time Alarm</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>NVCALALR</name>
<description>Non-valid Calendar Alarm</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
</peripherals>
</device>
<!-- Generated by : SOCK v3.89.0_08 -->
<!-- Source SCM revision : 3500 -->
<!-- Source SHA sum : b590ef0c9e8e906ec5bc11a213cdaa1501c4ad32 -->
Reference in New Issue View Git Blame Copy Permalink