重构User_code目录结构：将文件组织到子文件夹中

主要更改：
- 将所有BSP外设文件移动到独立子文件夹（can/, fdcan/, uart/等）
- 将所有Component文件移动到独立子文件夹（pid/, filter/, cmd/等）
- 将所有Device文件移动到独立子文件夹（dr16/, bmi088/等）
- 更新代码生成器以支持新的文件夹结构
- 保持向后兼容性，支持从子文件夹或根目录加载模板
- 添加STRUCTURE.md文档说明新的目录结构

优势：
✅ 更好的代码组织和管理
✅ 便于添加、删除、修改模板
✅ 清晰的模块划分
✅ 向后兼容现有结构

assets/User_code/device/motor_lk/motor_lk.c

@@ -0,0 +1,329 @@
+/*
+  LK电机驱动
+*/
+/* Includes ----------------------------------------------------------------- */
+#include "motor_lk.h"
+#include <stdbool.h>
+#include <string.h>
+#include "bsp/can.h"
+#include "bsp/mm.h"
+#include "bsp/time.h"
+#include "component/user_math.h"
+
+/* USER INCLUDE BEGIN */
+
+/* USER INCLUDE END */
+
+/* Private define ----------------------------------------------------------- */
+#define LK_CTRL_ID_BASE        (0x140)
+#define LK_FB_ID_BASE          (0x240)
+
+// LK电机命令字节定义
+#define LK_CMD_FEEDBACK        (0x9C)    // 反馈命令字节
+#define LK_CMD_MOTOR_OFF       (0x80)    // 电机关闭命令
+#define LK_CMD_MOTOR_ON        (0x88)    // 电机运行命令
+#define LK_CMD_TORQUE_CTRL     (0xA1)    // 转矩闭环控制命令
+
+// LK电机参数定义
+#define LK_CURR_LSB_MF         (33.0f / 4096.0f)   // MF电机转矩电流分辨率 A/LSB
+#define LK_CURR_LSB_MG         (66.0f / 4096.0f)   // MG电机转矩电流分辨率 A/LSB
+#define LK_POWER_RANGE_MS      (1000)              // MS电机功率范围 ±1000
+#define LK_TORQUE_RANGE        (2048)              // 转矩控制值范围 ±2048
+#define LK_TORQUE_CURRENT_MF   (16.5f)             // MF电机最大转矩电流 A
+#define LK_TORQUE_CURRENT_MG   (33.0f)             // MG电机最大转矩电流 A
+
+#define MOTOR_TX_BUF_SIZE      (8)
+#define MOTOR_RX_BUF_SIZE      (8)
+
+// 编码器分辨率定义
+#define LK_ENC_14BIT_MAX       (16383)   // 14位编码器最大值
+#define LK_ENC_15BIT_MAX       (32767)   // 15位编码器最大值  
+#define LK_ENC_16BIT_MAX       (65535)   // 16位编码器最大值
+
+/* USER DEFINE BEGIN */
+
+/* USER DEFINE END */
+
+/* Private macro ------------------------------------------------------------ */
+/* Private typedef ---------------------------------------------------------- */
+/* USER STRUCT BEGIN */
+
+/* USER STRUCT END */
+
+/* Private variables -------------------------------------------------------- */
+static MOTOR_LK_CANManager_t *can_managers[BSP_CAN_NUM] = {NULL};
+
+/* Private functions -------------------------------------------------------- */
+/* USER FUNCTION BEGIN */
+
+/* USER FUNCTION END */
+
+static float MOTOR_LK_GetCurrentLSB(MOTOR_LK_Module_t module) {
+    switch (module) {
+        case MOTOR_LK_MF9025:
+        case MOTOR_LK_MF9035:
+            return LK_CURR_LSB_MF;
+        default:
+            return LK_CURR_LSB_MG;  // 默认使用MG的分辨率
+    }
+}
+
+static uint16_t MOTOR_LK_GetEncoderMax(MOTOR_LK_Module_t module) {
+    // 根据电机型号返回编码器最大值，这里假设都使用16位编码器
+    // 实际使用时需要根据具体电机型号配置
+    return LK_ENC_16BIT_MAX;
+}
+
+static MOTOR_LK_CANManager_t* MOTOR_LK_GetCANManager(BSP_CAN_t can) {
+    if (can >= BSP_CAN_NUM) return NULL;
+    return can_managers[can];
+}
+
+static int8_t MOTOR_LK_CreateCANManager(BSP_CAN_t can) {
+    if (can >= BSP_CAN_NUM) return DEVICE_ERR;
+    if (can_managers[can] != NULL) return DEVICE_OK;
+    
+    can_managers[can] = (MOTOR_LK_CANManager_t*)BSP_Malloc(sizeof(MOTOR_LK_CANManager_t));
+    if (can_managers[can] == NULL) return DEVICE_ERR;
+    
+    memset(can_managers[can], 0, sizeof(MOTOR_LK_CANManager_t));
+    can_managers[can]->can = can;
+    return DEVICE_OK;
+}
+
+static void MOTOR_LK_Decode(MOTOR_LK_t *motor, BSP_CAN_Message_t *msg) {
+
+    // 检查命令字节是否为反馈命令
+    if (msg->data[0] != LK_CMD_FEEDBACK) {
+        // 如果不是标准反馈命令，可能是其他格式的数据
+        // 临时跳过命令字节检查，直接解析数据
+        // return;
+    }
+    
+    // 解析温度 (DATA[1])
+    motor->motor.feedback.temp = (int8_t)msg->data[1];
+
+    // 解析转矩电流值或功率值 (DATA[2], DATA[3])
+    int16_t raw_current_or_power = (int16_t)((msg->data[3] << 8) | msg->data[2]);
+
+    // 根据电机类型解析电流或功率
+    switch (motor->param.module) {
+        case MOTOR_LK_MF9025:
+        case MOTOR_LK_MF9035:
+            motor->motor.feedback.torque_current = raw_current_or_power * MOTOR_LK_GetCurrentLSB(motor->param.module);
+            break;
+        default:
+            motor->motor.feedback.torque_current = (float)raw_current_or_power;
+            break;
+    }
+
+    // 解析转速 (DATA[4], DATA[5]) - 单位：1dps/LSB
+    int16_t raw_speed = (int16_t)((msg->data[5] << 8) | msg->data[4]);
+    motor->motor.feedback.rotor_speed = motor->param.reverse ? -raw_speed : raw_speed;
+
+    // 解析编码器值 (DATA[6], DATA[7])
+    uint16_t raw_encoder = (uint16_t)((msg->data[7] << 8) | msg->data[6]);
+    uint16_t encoder_max = MOTOR_LK_GetEncoderMax(motor->param.module);
+
+    // 将编码器值转换为弧度 (0 ~ 2π)
+    float angle = (float)raw_encoder / (float)encoder_max * M_2PI;
+    motor->motor.feedback.rotor_abs_angle = motor->param.reverse ? (M_2PI - angle) : angle;
+}
+
+/* Exported functions ------------------------------------------------------- */
+
+int8_t MOTOR_LK_Register(MOTOR_LK_Param_t *param) {
+    if (param == NULL) return DEVICE_ERR_NULL;
+    
+    if (MOTOR_LK_CreateCANManager(param->can) != DEVICE_OK) return DEVICE_ERR;
+    MOTOR_LK_CANManager_t *manager = MOTOR_LK_GetCANManager(param->can);
+    if (manager == NULL) return DEVICE_ERR;
+    
+    // 检查是否已注册
+    for (int i = 0; i < manager->motor_count; i++) {
+        if (manager->motors[i] && manager->motors[i]->param.id == param->id) {
+            return DEVICE_ERR_INITED;
+        }
+    }
+    
+    // 检查数量
+    if (manager->motor_count >= MOTOR_LK_MAX_MOTORS) return DEVICE_ERR;
+    
+    // 创建新电机实例
+    MOTOR_LK_t *new_motor = (MOTOR_LK_t*)BSP_Malloc(sizeof(MOTOR_LK_t));
+    if (new_motor == NULL) return DEVICE_ERR;
+    
+    memcpy(&new_motor->param, param, sizeof(MOTOR_LK_Param_t));
+    memset(&new_motor->motor, 0, sizeof(MOTOR_t));
+    new_motor->motor.reverse = param->reverse;
+    
+    // 对于某些LK电机，反馈数据可能通过命令ID发送
+    // 根据实际测试，使用命令ID接收反馈数据
+    uint16_t feedback_id = param->id;  // 使用命令ID作为反馈ID
+    
+    // 注册CAN接收ID
+    if (BSP_CAN_RegisterId(param->can, feedback_id, 3) != BSP_OK) {
+        BSP_Free(new_motor);
+        return DEVICE_ERR;
+    }
+    
+    manager->motors[manager->motor_count] = new_motor;
+    manager->motor_count++;
+    return DEVICE_OK;
+}
+
+int8_t MOTOR_LK_Update(MOTOR_LK_Param_t *param) {
+    if (param == NULL) return DEVICE_ERR_NULL;
+    
+    MOTOR_LK_CANManager_t *manager = MOTOR_LK_GetCANManager(param->can);
+    if (manager == NULL) return DEVICE_ERR_NO_DEV;
+    
+    for (int i = 0; i < manager->motor_count; i++) {
+        MOTOR_LK_t *motor = manager->motors[i];
+        if (motor && motor->param.id == param->id) {
+            // 对于某些LK电机，反馈数据通过命令ID发送
+            uint16_t feedback_id = param->id;
+            
+            BSP_CAN_Message_t rx_msg;
+            if (BSP_CAN_GetMessage(param->can, feedback_id, &rx_msg, BSP_CAN_TIMEOUT_IMMEDIATE) != BSP_OK) {
+                uint64_t now_time = BSP_TIME_Get();
+                if (now_time - motor->motor.header.last_online_time > 1000) {
+                    motor->motor.header.online = false;
+                    return DEVICE_ERR_NO_DEV;
+                }
+                return DEVICE_ERR;
+            }
+            
+            motor->motor.header.online = true;
+            motor->motor.header.last_online_time = BSP_TIME_Get();
+            MOTOR_LK_Decode(motor, &rx_msg);
+            return DEVICE_OK;
+        }
+    }
+    return DEVICE_ERR_NO_DEV;
+}
+
+int8_t MOTOR_LK_UpdateAll(void) {
+    int8_t ret = DEVICE_OK;
+    for (int can = 0; can < BSP_CAN_NUM; can++) {
+        MOTOR_LK_CANManager_t *manager = MOTOR_LK_GetCANManager((BSP_CAN_t)can);
+        if (manager == NULL) continue;
+        
+        for (int i = 0; i < manager->motor_count; i++) {
+            MOTOR_LK_t *motor = manager->motors[i];
+            if (motor != NULL) {
+                if (MOTOR_LK_Update(&motor->param) != DEVICE_OK) {
+                    ret = DEVICE_ERR;
+                }
+            }
+        }
+    }
+    return ret;
+}
+
+int8_t MOTOR_LK_SetOutput(MOTOR_LK_Param_t *param, float value) {
+    if (param == NULL) return DEVICE_ERR_NULL;
+
+    MOTOR_LK_CANManager_t *manager = MOTOR_LK_GetCANManager(param->can);
+    if (manager == NULL) return DEVICE_ERR_NO_DEV;
+
+    // 限制输出值范围
+    if (value > 1.0f) value = 1.0f;
+    if (value < -1.0f) value = -1.0f;
+
+    MOTOR_LK_t *motor = MOTOR_LK_GetMotor(param);
+    if (motor == NULL) return DEVICE_ERR_NO_DEV;
+
+    // 根据反转参数调整输出
+    float output = param->reverse ? -value : value;
+
+    // 转矩闭环控制命令 - 将输出值转换为转矩控制值
+    int16_t torque_control = (int16_t)(output * (float)LK_TORQUE_RANGE);
+
+    // 构建CAN帧
+    BSP_CAN_StdDataFrame_t tx_frame;
+    tx_frame.id = param->id;
+    tx_frame.dlc = MOTOR_TX_BUF_SIZE;
+
+    tx_frame.data[0] = LK_CMD_TORQUE_CTRL;
+    tx_frame.data[1] = 0x00;
+    tx_frame.data[2] = 0x00;
+    tx_frame.data[3] = 0x00;
+    tx_frame.data[4] = (uint8_t)(torque_control & 0xFF);
+    tx_frame.data[5] = (uint8_t)((torque_control >> 8) & 0xFF);
+    tx_frame.data[6] = 0x00;
+    tx_frame.data[7] = 0x00;
+    return BSP_CAN_TransmitStdDataFrame(param->can, &tx_frame) == BSP_OK ? DEVICE_OK : DEVICE_ERR;
+}
+
+int8_t MOTOR_LK_Ctrl(MOTOR_LK_Param_t *param) {
+    // 对于LK电机，每次设置输出时就直接发送控制命令
+    // 这个函数可以用于发送其他控制命令，如电机开启/关闭
+    return DEVICE_OK;
+}
+
+int8_t MOTOR_LK_MotorOn(MOTOR_LK_Param_t *param) {
+    if (param == NULL) return DEVICE_ERR_NULL;
+    
+    BSP_CAN_StdDataFrame_t tx_frame;
+    tx_frame.id = param->id;
+    tx_frame.dlc = MOTOR_TX_BUF_SIZE;
+    
+    // 电机运行命令
+    tx_frame.data[0] = LK_CMD_MOTOR_ON;     // 命令字节
+    tx_frame.data[1] = 0x00;
+    tx_frame.data[2] = 0x00;
+    tx_frame.data[3] = 0x00;
+    tx_frame.data[4] = 0x00;
+    tx_frame.data[5] = 0x00;
+    tx_frame.data[6] = 0x00;
+    tx_frame.data[7] = 0x00;
+    return BSP_CAN_TransmitStdDataFrame(param->can, &tx_frame) == BSP_OK ? DEVICE_OK : DEVICE_ERR;
+}
+
+int8_t MOTOR_LK_MotorOff(MOTOR_LK_Param_t *param) {
+    if (param == NULL) return DEVICE_ERR_NULL;
+    
+    BSP_CAN_StdDataFrame_t tx_frame;
+    tx_frame.id = param->id;
+    tx_frame.dlc = MOTOR_TX_BUF_SIZE;
+    
+    // 电机关闭命令
+    tx_frame.data[0] = LK_CMD_MOTOR_OFF;    // 命令字节
+    tx_frame.data[1] = 0x00;
+    tx_frame.data[2] = 0x00;
+    tx_frame.data[3] = 0x00;
+    tx_frame.data[4] = 0x00;
+    tx_frame.data[5] = 0x00;
+    tx_frame.data[6] = 0x00;
+    tx_frame.data[7] = 0x00;
+    return BSP_CAN_TransmitStdDataFrame(param->can, &tx_frame) == BSP_OK ? DEVICE_OK : DEVICE_ERR;
+}
+
+MOTOR_LK_t* MOTOR_LK_GetMotor(MOTOR_LK_Param_t *param) {
+    if (param == NULL) return NULL;
+    
+    MOTOR_LK_CANManager_t *manager = MOTOR_LK_GetCANManager(param->can);
+    if (manager == NULL) return NULL;
+    
+    for (int i = 0; i < manager->motor_count; i++) {
+        MOTOR_LK_t *motor = manager->motors[i];
+        if (motor && motor->param.id == param->id) {
+            return motor;
+        }
+    }
+    return NULL;
+}
+
+int8_t MOTOR_LK_Relax(MOTOR_LK_Param_t *param) {
+    return MOTOR_LK_SetOutput(param, 0.0f);
+}
+
+int8_t MOTOR_LK_Offine(MOTOR_LK_Param_t *param) {
+    MOTOR_LK_t *motor = MOTOR_LK_GetMotor(param);
+    if (motor) {
+        motor->motor.header.online = false;
+        return DEVICE_OK;
+    }
+    return DEVICE_ERR_NO_DEV;
+}

assets/User_code/device/motor_lk/motor_lk.h

@@ -0,0 +1,119 @@
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ----------------------------------------------------------------- */
+#include "device/device.h"
+#include "device/motor.h"
+#include "bsp/can.h"
+
+/* Exported constants ------------------------------------------------------- */
+#define MOTOR_LK_MAX_MOTORS 32
+
+/* Exported macro ----------------------------------------------------------- */
+/* Exported types ----------------------------------------------------------- */
+typedef enum {
+    MOTOR_LK_MF9025,
+    MOTOR_LK_MF9035,
+} MOTOR_LK_Module_t;
+
+
+/*每个电机需要的参数*/
+typedef struct {
+    BSP_CAN_t can;
+    uint16_t id;
+    MOTOR_LK_Module_t module;
+    bool reverse;
+} MOTOR_LK_Param_t;
+
+/*电机实例*/
+typedef struct{
+    MOTOR_LK_Param_t param;
+    MOTOR_t motor;
+} MOTOR_LK_t;
+
+/*CAN管理器，管理一个CAN总线上所有的电机*/
+typedef struct {
+    BSP_CAN_t can;
+    MOTOR_LK_t *motors[MOTOR_LK_MAX_MOTORS];
+    uint8_t motor_count;
+} MOTOR_LK_CANManager_t;
+
+/* Exported functions prototypes -------------------------------------------- */
+
+/**
+ * @brief 注册一个LK电机
+ * @param param 电机参数
+ * @return 
+ */
+int8_t MOTOR_LK_Register(MOTOR_LK_Param_t *param);
+
+/**
+ * @brief 更新指定电机数据
+ * @param param 电机参数
+ * @return 
+ */
+int8_t MOTOR_LK_Update(MOTOR_LK_Param_t *param);
+
+/**
+ * @brief 设置一个电机的输出
+ * @param param 电机参数
+ * @param value 输出值，范围[-1.0, 1.0]
+ * @return 
+ */
+int8_t MOTOR_LK_SetOutput(MOTOR_LK_Param_t *param, float value);
+
+/**
+ * @brief 发送控制命令到电机，注意一个CAN可以控制多个电机，所以只需要发送一次即可
+ * @param param 电机参数
+ * @return 
+ */
+int8_t MOTOR_LK_Ctrl(MOTOR_LK_Param_t *param);
+
+/**
+ * @brief 发送电机开启命令
+ * @param param 电机参数
+ * @return 
+ */
+int8_t MOTOR_LK_MotorOn(MOTOR_LK_Param_t *param);
+
+/**
+ * @brief 发送电机关闭命令
+ * @param param 电机参数
+ * @return 
+ */
+int8_t MOTOR_LK_MotorOff(MOTOR_LK_Param_t *param);
+
+/**
+ * @brief 获取指定电机的实例指针
+ * @param param 电机参数
+ * @return 
+ */
+MOTOR_LK_t* MOTOR_LK_GetMotor(MOTOR_LK_Param_t *param);
+
+/**
+ * @brief 使电机松弛（设置输出为0）
+ * @param param 
+ * @return 
+ */
+int8_t MOTOR_LK_Relax(MOTOR_LK_Param_t *param);
+
+/**
+ * @brief 使电机离线（设置在线状态为false）
+ * @param param 
+ * @return 
+ */
+int8_t MOTOR_LK_Offine(MOTOR_LK_Param_t *param);
+
+/**
+ * @brief 
+ * @param  
+ * @return 
+ */
+int8_t MOTOR_LK_UpdateAll(void);
+
+#ifdef __cplusplus
+}
+#endif