289 lines
8.3 KiB
C
289 lines
8.3 KiB
C
/* USER CODE BEGIN Header */
|
||
/**
|
||
******************************************************************************
|
||
* @file usart.c
|
||
* @brief This file provides code for the configuration
|
||
* of the USART instances.
|
||
******************************************************************************
|
||
* @attention
|
||
*
|
||
* Copyright (c) 2025 STMicroelectronics.
|
||
* All rights reserved.
|
||
*
|
||
* This software is licensed under terms that can be found in the LICENSE file
|
||
* in the root directory of this software component.
|
||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
*
|
||
******************************************************************************
|
||
*/
|
||
/* USER CODE END Header */
|
||
/* Includes ------------------------------------------------------------------*/
|
||
#include "usart.h"
|
||
|
||
/* USER CODE BEGIN 0 */
|
||
#include "string.h"
|
||
#include <stdio.h>
|
||
#include <stdbool.h>
|
||
|
||
uint8_t uart_buffer[255],uart2_data[255],uart2_datalength;
|
||
bool uart2_data_ready=false;
|
||
/* USER CODE END 0 */
|
||
|
||
UART_HandleTypeDef huart1;
|
||
UART_HandleTypeDef huart2;
|
||
DMA_HandleTypeDef hdma_usart2_rx;
|
||
DMA_HandleTypeDef hdma_usart2_tx;
|
||
|
||
/* USART1 init function */
|
||
|
||
void MX_USART1_UART_Init(void)
|
||
{
|
||
|
||
/* USER CODE BEGIN USART1_Init 0 */
|
||
|
||
/* USER CODE END USART1_Init 0 */
|
||
|
||
/* USER CODE BEGIN USART1_Init 1 */
|
||
|
||
/* USER CODE END USART1_Init 1 */
|
||
huart1.Instance = USART1;
|
||
huart1.Init.BaudRate = 100000;
|
||
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
||
huart1.Init.StopBits = UART_STOPBITS_1;
|
||
huart1.Init.Parity = UART_PARITY_NONE;
|
||
huart1.Init.Mode = UART_MODE_TX_RX;
|
||
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
||
if (HAL_UART_Init(&huart1) != HAL_OK)
|
||
{
|
||
Error_Handler();
|
||
}
|
||
/* USER CODE BEGIN USART1_Init 2 */
|
||
|
||
/* USER CODE END USART1_Init 2 */
|
||
|
||
}
|
||
/* USART2 init function */
|
||
|
||
void MX_USART2_UART_Init(void)
|
||
{
|
||
|
||
/* USER CODE BEGIN USART2_Init 0 */
|
||
|
||
/* USER CODE END USART2_Init 0 */
|
||
|
||
/* USER CODE BEGIN USART2_Init 1 */
|
||
|
||
/* USER CODE END USART2_Init 1 */
|
||
huart2.Instance = USART2;
|
||
huart2.Init.BaudRate = 115200;
|
||
huart2.Init.WordLength = UART_WORDLENGTH_8B;
|
||
huart2.Init.StopBits = UART_STOPBITS_1;
|
||
huart2.Init.Parity = UART_PARITY_NONE;
|
||
huart2.Init.Mode = UART_MODE_TX_RX;
|
||
huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||
huart2.Init.OverSampling = UART_OVERSAMPLING_16;
|
||
if (HAL_UART_Init(&huart2) != HAL_OK)
|
||
{
|
||
Error_Handler();
|
||
}
|
||
/* USER CODE BEGIN USART2_Init 2 */
|
||
/* 启动UART2 DMA接收 - 修复第一次命令不触发的问题 */
|
||
HAL_UART_Receive_DMA(&huart2, (uint8_t*)uart_buffer, 255);
|
||
/* 使能UART2空闲中断 */
|
||
__HAL_UART_ENABLE_IT(&huart2, UART_IT_IDLE);
|
||
/* USER CODE END USART2_Init 2 */
|
||
|
||
}
|
||
|
||
void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
|
||
{
|
||
|
||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||
if(uartHandle->Instance==USART1)
|
||
{
|
||
/* USER CODE BEGIN USART1_MspInit 0 */
|
||
|
||
/* USER CODE END USART1_MspInit 0 */
|
||
/* USART1 clock enable */
|
||
__HAL_RCC_USART1_CLK_ENABLE();
|
||
|
||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||
/**USART1 GPIO Configuration
|
||
PA9 ------> USART1_TX
|
||
PA10 ------> USART1_RX
|
||
*/
|
||
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||
|
||
GPIO_InitStruct.Pin = GPIO_PIN_10;
|
||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||
|
||
/* USART1 interrupt Init */
|
||
HAL_NVIC_SetPriority(USART1_IRQn, 5, 0);
|
||
HAL_NVIC_EnableIRQ(USART1_IRQn);
|
||
/* USER CODE BEGIN USART1_MspInit 1 */
|
||
|
||
/* USER CODE END USART1_MspInit 1 */
|
||
}
|
||
else if(uartHandle->Instance==USART2)
|
||
{
|
||
/* USER CODE BEGIN USART2_MspInit 0 */
|
||
|
||
/* USER CODE END USART2_MspInit 0 */
|
||
/* USART2 clock enable */
|
||
__HAL_RCC_USART2_CLK_ENABLE();
|
||
|
||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||
/**USART2 GPIO Configuration
|
||
PA2 ------> USART2_TX
|
||
PA3 ------> USART2_RX
|
||
*/
|
||
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||
|
||
GPIO_InitStruct.Pin = GPIO_PIN_3;
|
||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||
|
||
/* USART2 DMA Init */
|
||
/* USART2_RX Init */
|
||
hdma_usart2_rx.Instance = DMA1_Channel6;
|
||
hdma_usart2_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||
hdma_usart2_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||
hdma_usart2_rx.Init.MemInc = DMA_MINC_ENABLE;
|
||
hdma_usart2_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||
hdma_usart2_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||
hdma_usart2_rx.Init.Mode = DMA_NORMAL;
|
||
hdma_usart2_rx.Init.Priority = DMA_PRIORITY_LOW;
|
||
if (HAL_DMA_Init(&hdma_usart2_rx) != HAL_OK)
|
||
{
|
||
Error_Handler();
|
||
}
|
||
|
||
__HAL_LINKDMA(uartHandle,hdmarx,hdma_usart2_rx);
|
||
|
||
/* USART2_TX Init */
|
||
hdma_usart2_tx.Instance = DMA1_Channel7;
|
||
hdma_usart2_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
||
hdma_usart2_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||
hdma_usart2_tx.Init.MemInc = DMA_MINC_ENABLE;
|
||
hdma_usart2_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||
hdma_usart2_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||
hdma_usart2_tx.Init.Mode = DMA_NORMAL;
|
||
hdma_usart2_tx.Init.Priority = DMA_PRIORITY_LOW;
|
||
if (HAL_DMA_Init(&hdma_usart2_tx) != HAL_OK)
|
||
{
|
||
Error_Handler();
|
||
}
|
||
|
||
__HAL_LINKDMA(uartHandle,hdmatx,hdma_usart2_tx);
|
||
|
||
/* USART2 interrupt Init */
|
||
HAL_NVIC_SetPriority(USART2_IRQn, 5, 0);
|
||
HAL_NVIC_EnableIRQ(USART2_IRQn);
|
||
/* USER CODE BEGIN USART2_MspInit 1 */
|
||
|
||
/* USER CODE END USART2_MspInit 1 */
|
||
}
|
||
}
|
||
|
||
void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
|
||
{
|
||
|
||
if(uartHandle->Instance==USART1)
|
||
{
|
||
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
||
|
||
/* USER CODE END USART1_MspDeInit 0 */
|
||
/* Peripheral clock disable */
|
||
__HAL_RCC_USART1_CLK_DISABLE();
|
||
|
||
/**USART1 GPIO Configuration
|
||
PA9 ------> USART1_TX
|
||
PA10 ------> USART1_RX
|
||
*/
|
||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
|
||
|
||
/* USART1 interrupt Deinit */
|
||
HAL_NVIC_DisableIRQ(USART1_IRQn);
|
||
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
||
|
||
/* USER CODE END USART1_MspDeInit 1 */
|
||
}
|
||
else if(uartHandle->Instance==USART2)
|
||
{
|
||
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
||
|
||
/* USER CODE END USART2_MspDeInit 0 */
|
||
/* Peripheral clock disable */
|
||
__HAL_RCC_USART2_CLK_DISABLE();
|
||
|
||
/**USART2 GPIO Configuration
|
||
PA2 ------> USART2_TX
|
||
PA3 ------> USART2_RX
|
||
*/
|
||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
|
||
|
||
/* USART2 DMA DeInit */
|
||
HAL_DMA_DeInit(uartHandle->hdmarx);
|
||
HAL_DMA_DeInit(uartHandle->hdmatx);
|
||
|
||
/* USART2 interrupt Deinit */
|
||
HAL_NVIC_DisableIRQ(USART2_IRQn);
|
||
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
||
|
||
/* USER CODE END USART2_MspDeInit 1 */
|
||
}
|
||
}
|
||
|
||
/* USER CODE BEGIN 1 */
|
||
|
||
void USAR_UART2_IDLECallback(UART_HandleTypeDef *huart)
|
||
{
|
||
if (huart == NULL) return;
|
||
if (huart->Instance != USART2) return; // 目前仅支持 USART2 的 DMA 空闲处理
|
||
|
||
HAL_UART_DMAStop(huart); // 停止 DMA
|
||
|
||
uart2_datalength = 255 - __HAL_DMA_GET_COUNTER(&hdma_usart2_rx); // 计算接收长度（针对 USART2）
|
||
|
||
if (uart2_datalength > 0 && uart2_datalength < 255) {
|
||
printf("[UART2 RX:%d] ", uart2_datalength);
|
||
HAL_UART_Transmit(huart, uart_buffer, uart2_datalength, 0x200); // 回显/打印接收数据
|
||
printf("\r\n");
|
||
|
||
/* 只有在上次数据处理完后才复制新数据,防止覆盖 */
|
||
if (!uart2_data_ready) {
|
||
memcpy(uart2_data, uart_buffer, uart2_datalength);
|
||
uart2_data_ready = true; /* 标记数据就绪 */
|
||
}
|
||
}
|
||
|
||
memset(uart_buffer, 0, sizeof(uart_buffer)); // 清空缓冲区
|
||
HAL_UART_Receive_DMA(huart, (uint8_t*)uart_buffer, 255); // 重启 DMA 接收
|
||
}
|
||
|
||
void USER_UART_IRQHandler(UART_HandleTypeDef *huart)
|
||
{
|
||
if (huart == NULL) return;
|
||
|
||
// 仅处理 USART2 的 IDLE 中断（与中断向量里调用保持一致）
|
||
if (huart->Instance == USART2)
|
||
{
|
||
if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) != RESET) // 检测 IDLE
|
||
{
|
||
__HAL_UART_CLEAR_IDLEFLAG(huart); // 清除 IDLE 标志,避免重复进入中断
|
||
USAR_UART2_IDLECallback(huart); // 调用具体处理
|
||
}
|
||
}
|
||
}
|
||
/* USER CODE END 1 */
|