<<<<<<< HEAD
/* ----------------------------------------------------------------------
 * Project:      CMSIS DSP Library
 * Title:        arm_offset_q31.c
 * Description:  Q31 vector offset
 *
 * $Date:        23 April 2021
 * $Revision:    V1.9.0
 *
 * Target Processor: Cortex-M and Cortex-A cores
 * -------------------------------------------------------------------- */
/*
 * Copyright (C) 2010-2021 ARM Limited or its affiliates. All rights reserved.
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the License); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "dsp/basic_math_functions.h"

/**
  @ingroup groupMath
 */

/**
  @addtogroup BasicOffset
  @{
 */

/**
  @brief         Adds a constant offset to a Q31 vector.
  @param[in]     pSrc       points to the input vector
  @param[in]     offset     is the offset to be added
  @param[out]    pDst       points to the output vector
  @param[in]     blockSize  number of samples in each vector
  @return        none

  @par           Scaling and Overflow Behavior
                   The function uses saturating arithmetic.
                   Results outside of the allowable Q31 range [0x80000000 0x7FFFFFFF] are saturated.
 */

#if defined(ARM_MATH_MVEI) && !defined(ARM_MATH_AUTOVECTORIZE)

#include "arm_helium_utils.h"

void arm_offset_q31(
    const q31_t * pSrc,
    q31_t   offset,
    q31_t * pDst,
    uint32_t blockSize)
{
    uint32_t  blkCnt;           /* loop counters */
    q31x4_t vecSrc;

    /* Compute 4 outputs at a time */
    blkCnt = blockSize >> 2;
    while (blkCnt > 0U)
    {
        /*
         * C = A + offset
         * Add offset and then store the result in the destination buffer.
         */
        vecSrc = vld1q(pSrc);
        vst1q(pDst, vqaddq(vecSrc, offset));
        /*
         * Decrement the blockSize loop counter
         */
        blkCnt--;
        /*
         * advance vector source and destination pointers
         */
        pSrc += 4;
        pDst += 4;
    }
    /*
     * tail
     */
    blkCnt = blockSize & 3;
    if (blkCnt > 0U)
    {
        mve_pred16_t p0 = vctp32q(blkCnt);
        vecSrc = vld1q(pSrc);
        vstrwq_p(pDst, vqaddq(vecSrc, offset), p0);
    }
}

#else
void arm_offset_q31(
  const q31_t * pSrc,
        q31_t offset,
        q31_t * pDst,
        uint32_t blockSize)
{
        uint32_t blkCnt;                               /* Loop counter */

#if defined (ARM_MATH_LOOPUNROLL)

  /* Loop unrolling: Compute 4 outputs at a time */
  blkCnt = blockSize >> 2U;

  while (blkCnt > 0U)
  {
    /* C = A + offset */

    /* Add offset and store result in destination buffer. */
    *pDst++ = __QADD(*pSrc++, offset);
    
    *pDst++ = __QADD(*pSrc++, offset);
    
    *pDst++ = __QADD(*pSrc++, offset);
    
    *pDst++ = __QADD(*pSrc++, offset);

    /* Decrement loop counter */
    blkCnt--;
  }

  /* Loop unrolling: Compute remaining outputs */
  blkCnt = blockSize % 0x4U;

#else

  /* Initialize blkCnt with number of samples */
  blkCnt = blockSize;

#endif /* #if defined (ARM_MATH_LOOPUNROLL) */

  while (blkCnt > 0U)
  {
    /* C = A + offset */

    /* Add offset and store result in destination buffer. */
#if defined (ARM_MATH_DSP)
    *pDst++ = __QADD(*pSrc++, offset);
#else
    *pDst++ = (q31_t) clip_q63_to_q31((q63_t) * pSrc++ + offset);
#endif

    /* Decrement loop counter */
    blkCnt--;
  }

}
#endif /* defined(ARM_MATH_MVEI) */

/**
  @} end of BasicOffset group
 */
=======
/* ----------------------------------------------------------------------
 * Project:      CMSIS DSP Library
 * Title:        arm_offset_q31.c
 * Description:  Q31 vector offset
 *
 * $Date:        27. January 2017
 * $Revision:    V.1.5.1
 *
 * Target Processor: Cortex-M cores
 * -------------------------------------------------------------------- */
/*
 * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the License); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "arm_math.h"

/**
 * @ingroup groupMath
 */

/**
 * @addtogroup offset
 * @{
 */

/**
 * @brief  Adds a constant offset to a Q31 vector.
 * @param[in]  *pSrc points to the input vector
 * @param[in]  offset is the offset to be added
 * @param[out]  *pDst points to the output vector
 * @param[in]  blockSize number of samples in the vector
 * @return none.
 *
 * <b>Scaling and Overflow Behavior:</b>
 * \par
 * The function uses saturating arithmetic.
 * Results outside of the allowable Q31 range [0x80000000 0x7FFFFFFF] are saturated.
 */

void arm_offset_q31(
  q31_t * pSrc,
  q31_t offset,
  q31_t * pDst,
  uint32_t blockSize)
{
  uint32_t blkCnt;                               /* loop counter */

#if defined (ARM_MATH_DSP)

/* Run the below code for Cortex-M4 and Cortex-M3 */
  q31_t in1, in2, in3, in4;


  /*loop Unrolling */
  blkCnt = blockSize >> 2U;

  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.
   ** a second loop below computes the remaining 1 to 3 samples. */
  while (blkCnt > 0U)
  {
    /* C = A + offset */
    /* Add offset and then store the results in the destination buffer. */
    in1 = *pSrc++;
    in2 = *pSrc++;
    in3 = *pSrc++;
    in4 = *pSrc++;

    *pDst++ = __QADD(in1, offset);
    *pDst++ = __QADD(in2, offset);
    *pDst++ = __QADD(in3, offset);
    *pDst++ = __QADD(in4, offset);

    /* Decrement the loop counter */
    blkCnt--;
  }

  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.
   ** No loop unrolling is used. */
  blkCnt = blockSize % 0x4U;

  while (blkCnt > 0U)
  {
    /* C = A + offset */
    /* Add offset and then store the result in the destination buffer. */
    *pDst++ = __QADD(*pSrc++, offset);

    /* Decrement the loop counter */
    blkCnt--;
  }

#else

  /* Run the below code for Cortex-M0 */

  /* Initialize blkCnt with number of samples */
  blkCnt = blockSize;

  while (blkCnt > 0U)
  {
    /* C = A + offset */
    /* Add offset and then store the result in the destination buffer. */
    *pDst++ = (q31_t) clip_q63_to_q31((q63_t) * pSrc++ + offset);

    /* Decrement the loop counter */
    blkCnt--;
  }

#endif /* #if defined (ARM_MATH_DSP) */

}

/**
 * @} end of offset group
 */
>>>>>>> upper