RMUL2025/lib/cmsis_5/CMSIS/DAP/Firmware/Validation/MDK5

CMSIS-DAP debug unit validation

The following debug functionality is tested:

• Execution breakpoint with hit count
• Breakpoint on read
• Breakpoint on write
• Memory read
• Memory write
• Register read
• Register write
• Single stepping
• Run/stop debugging

The test is self-contained and can be executed on the hardware target.

To configure the test for a specific hardware target:

1. Open the µVision project and select device mounted on hardware target (automatically selects flash algorithm for download).
2. Select CMSIS-DAP as the debugger (if not already selected).
3. Build the project.

To run the test on the hardware target:

1. Connect the CMSIS-DAP debug unit via JTAG/SWD to the hardware target.
2. Connect the CMSIS-DAP debug unit under test to a PC via USB.
3. Open the µVision project and start a debug session.
4. Test results are printed into a test.log file.

To run the test on the target in batch mode, open a Command window and execute:

C:\> .\test.bat

Test results are printed into a test_results.txt file.