<?xml version="1.0" encoding="UTF-8"?>
<!--
Copyright (c) 2017 Microchip Technology Inc.
SPDX-License-Identifier: Apache-2.0
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<device xmlns:xs="http://www.w3.org/2001/XMLSchema-instance"
schemaVersion="1.1"
xs:noNamespaceSchemaLocation="CMSIS-SVD.xsd">
<vendor>Microchip Technology</vendor>
<vendorID>MCHP</vendorID>
<name>ATSAMD51J18A</name>
<series>SAMD51</series>
<version>0</version>
<description>Microchip ATSAMD51J18A Microcontroller</description>
<cpu>
<name>CM4</name>
<revision>r0p1</revision>
<endian>selectable</endian>
<mpuPresent>true</mpuPresent>
<fpuPresent>true</fpuPresent>
<nvicPrioBits>3</nvicPrioBits>
<vendorSystickConfig>false</vendorSystickConfig>
</cpu>
<addressUnitBits>8</addressUnitBits>
<width>32</width>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<peripherals>
<peripheral>
<name>AC</name>
<version>U25011.0.0</version>
<description>Analog Comparators</description>
<groupName>AC</groupName>
<prependToName>AC_</prependToName>
<baseAddress>0x42002000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x26</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>AC</name>
<value>122</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>Control B</description>
<addressOffset>0x1</addressOffset>
<size>8</size>
<access>write-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>START0</name>
<description>Comparator 0 Start Comparison</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>START1</name>
<description>Comparator 1 Start Comparison</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x2</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>COMPEO0</name>
<description>Comparator 0 Event Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMPEO1</name>
<description>Comparator 1 Event Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINEO0</name>
<description>Window 0 Event Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMPEI0</name>
<description>Comparator 0 Event Input Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMPEI1</name>
<description>Comparator 1 Event Input Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEI0</name>
<description>Comparator 0 Input Event Invert Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEI1</name>
<description>Comparator 1 Input Event Invert Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>COMP0</name>
<description>Comparator 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP1</name>
<description>Comparator 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WIN0</name>
<description>Window 0 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>COMP0</name>
<description>Comparator 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP1</name>
<description>Comparator 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WIN0</name>
<description>Window 0 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x6</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>COMP0</name>
<description>Comparator 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP1</name>
<description>Comparator 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WIN0</name>
<description>Window 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSA</name>
<description>Status A</description>
<addressOffset>0x7</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>STATE0</name>
<description>Comparator 0 Current State</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STATE1</name>
<description>Comparator 1 Current State</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WSTATE0</name>
<description>Window 0 Current State</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>WSTATE0Select</name>
<enumeratedValue>
<name>ABOVE</name>
<description>Signal is above window</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>INSIDE</name>
<description>Signal is inside window</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>BELOW</name>
<description>Signal is below window</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>STATUSB</name>
<description>Status B</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>READY0</name>
<description>Comparator 0 Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READY1</name>
<description>Comparator 1 Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x9</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGRUN</name>
<description>Debug Run</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WINCTRL</name>
<description>Window Control</description>
<addressOffset>0xA</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>WEN0</name>
<description>Window 0 Mode Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINTSEL0</name>
<description>Window 0 Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>WINTSEL0Select</name>
<enumeratedValue>
<name>ABOVE</name>
<description>Interrupt on signal above window</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>INSIDE</name>
<description>Interrupt on signal inside window</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>BELOW</name>
<description>Interrupt on signal below window</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>OUTSIDE</name>
<description>Interrupt on signal outside window</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>1</dimIncrement>
<name>SCALER[%s]</name>
<description>Scaler n</description>
<addressOffset>0xC</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>VALUE</name>
<description>Scaler Value</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<name>COMPCTRL[%s]</name>
<description>Comparator Control n</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SINGLE</name>
<description>Single-Shot Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INTSEL</name>
<description>Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>INTSELSelect</name>
<enumeratedValue>
<name>TOGGLE</name>
<description>Interrupt on comparator output toggle</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Interrupt on comparator output rising</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Interrupt on comparator output falling</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>EOC</name>
<description>Interrupt on end of comparison (single-shot mode only)</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUXNEG</name>
<description>Negative Input Mux Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>MUXNEGSelect</name>
<enumeratedValue>
<name>PIN0</name>
<description>I/O pin 0</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PIN1</name>
<description>I/O pin 1</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>PIN2</name>
<description>I/O pin 2</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>PIN3</name>
<description>I/O pin 3</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>GND</name>
<description>Ground</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>VSCALE</name>
<description>VDD scaler</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>BANDGAP</name>
<description>Internal bandgap voltage</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>DAC</name>
<description>DAC output</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MUXPOS</name>
<description>Positive Input Mux Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>MUXPOSSelect</name>
<enumeratedValue>
<name>PIN0</name>
<description>I/O pin 0</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PIN1</name>
<description>I/O pin 1</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>PIN2</name>
<description>I/O pin 2</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>PIN3</name>
<description>I/O pin 3</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>VSCALE</name>
<description>VDD Scaler</description>
<value>4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SWAP</name>
<description>Swap Inputs and Invert</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPEED</name>
<description>Speed Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SPEEDSelect</name>
<enumeratedValue>
<name>HIGH</name>
<description>High speed</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HYSTEN</name>
<description>Hysteresis Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HYST</name>
<description>Hysteresis Level</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>HYSTSelect</name>
<enumeratedValue>
<name>HYST50</name>
<description>50mV</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>HYST100</name>
<description>100mV</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>HYST150</name>
<description>150mV</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FLEN</name>
<description>Filter Length</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>FLENSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>No filtering</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>MAJ3</name>
<description>3-bit majority function (2 of 3)</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>MAJ5</name>
<description>5-bit majority function (3 of 5)</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>OUT</name>
<description>Output</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>OUTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>The output of COMPn is not routed to the COMPn I/O port</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ASYNC</name>
<description>The asynchronous output of COMPn is routed to the COMPn I/O port</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>SYNC</name>
<description>The synchronous output (including filtering) of COMPn is routed to the COMPn I/O port</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINCTRL</name>
<description>WINCTRL Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMPCTRL0</name>
<description>COMPCTRL 0 Synchronization Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMPCTRL1</name>
<description>COMPCTRL 1 Synchronization Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CALIB</name>
<description>Calibration</description>
<addressOffset>0x24</addressOffset>
<size>16</size>
<resetValue>0x0101</resetValue>
<fields>
<field>
<name>BIAS0</name>
<description>COMP0/1 Bias Scaling</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>ADC0</name>
<version>U25001.0.0</version>
<description>Analog Digital Converter</description>
<groupName>ADC</groupName>
<prependToName>ADC_</prependToName>
<baseAddress>0x43001C00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x4A</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>ADC0_OTHER</name>
<value>118</value>
</interrupt>
<interrupt>
<name>ADC0_RESRDY</name>
<value>119</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DUALSEL</name>
<description>Dual Mode Trigger Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DUALSELSelect</name>
<enumeratedValue>
<name>BOTH</name>
<description>Start event or software trigger will start a conversion on both ADCs</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>INTERLEAVE</name>
<description>START event or software trigger will alternatingly start a conversion on ADC0 and ADC1</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SLAVEEN</name>
<description>Slave Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler Configuration</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>DIV2</name>
<description>Peripheral clock divided by 2</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Peripheral clock divided by 4</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Peripheral clock divided by 8</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Peripheral clock divided by 16</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>Peripheral clock divided by 32</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Peripheral clock divided by 64</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>Peripheral clock divided by 128</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Peripheral clock divided by 256</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>R2R</name>
<description>Rail to Rail Operation Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x2</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>FLUSHEI</name>
<description>Flush Event Input Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STARTEI</name>
<description>Start Conversion Event Input Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLUSHINV</name>
<description>Flush Event Invert Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STARTINV</name>
<description>Start Conversion Event Invert Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESRDYEO</name>
<description>Result Ready Event Out</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINMONEO</name>
<description>Window Monitor Event Out</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x3</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGRUN</name>
<description>Debug Run</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INPUTCTRL</name>
<description>Input Control</description>
<addressOffset>0x4</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>MUXPOS</name>
<description>Positive Mux Input Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<enumeratedValues>
<name>MUXPOSSelect</name>
<enumeratedValue>
<name>AIN0</name>
<description>ADC AIN0 Pin</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN1</name>
<description>ADC AIN1 Pin</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN2</name>
<description>ADC AIN2 Pin</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN3</name>
<description>ADC AIN3 Pin</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN4</name>
<description>ADC AIN4 Pin</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN5</name>
<description>ADC AIN5 Pin</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN6</name>
<description>ADC AIN6 Pin</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN7</name>
<description>ADC AIN7 Pin</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN8</name>
<description>ADC AIN8 Pin</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN9</name>
<description>ADC AIN9 Pin</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN10</name>
<description>ADC AIN10 Pin</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN11</name>
<description>ADC AIN11 Pin</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN12</name>
<description>ADC AIN12 Pin</description>
<value>0xC</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN13</name>
<description>ADC AIN13 Pin</description>
<value>0xD</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN14</name>
<description>ADC AIN14 Pin</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN15</name>
<description>ADC AIN15 Pin</description>
<value>0xF</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN16</name>
<description>ADC AIN16 Pin</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN17</name>
<description>ADC AIN17 Pin</description>
<value>0x11</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN18</name>
<description>ADC AIN18 Pin</description>
<value>0x12</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN19</name>
<description>ADC AIN19 Pin</description>
<value>0x13</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN20</name>
<description>ADC AIN20 Pin</description>
<value>0x14</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN21</name>
<description>ADC AIN21 Pin</description>
<value>0x15</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN22</name>
<description>ADC AIN22 Pin</description>
<value>0x16</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN23</name>
<description>ADC AIN23 Pin</description>
<value>0x17</value>
</enumeratedValue>
<enumeratedValue>
<name>SCALEDCOREVCC</name>
<description>1/4 Scaled Core Supply</description>
<value>0x18</value>
</enumeratedValue>
<enumeratedValue>
<name>SCALEDVBAT</name>
<description>1/4 Scaled VBAT Supply</description>
<value>0x19</value>
</enumeratedValue>
<enumeratedValue>
<name>SCALEDIOVCC</name>
<description>1/4 Scaled I/O Supply</description>
<value>0x1A</value>
</enumeratedValue>
<enumeratedValue>
<name>BANDGAP</name>
<description>Bandgap Voltage</description>
<value>0x1B</value>
</enumeratedValue>
<enumeratedValue>
<name>PTAT</name>
<description>Temperature Sensor</description>
<value>0x1C</value>
</enumeratedValue>
<enumeratedValue>
<name>CTAT</name>
<description>Temperature Sensor</description>
<value>0x1D</value>
</enumeratedValue>
<enumeratedValue>
<name>DAC</name>
<description>DAC Output</description>
<value>0x1E</value>
</enumeratedValue>
<enumeratedValue>
<name>PTC</name>
<description>PTC output (only on ADC0)</description>
<value>0x1F</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIFFMODE</name>
<description>Differential Mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUXNEG</name>
<description>Negative Mux Input Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
<enumeratedValues>
<name>MUXNEGSelect</name>
<enumeratedValue>
<name>AIN0</name>
<description>ADC AIN0 Pin</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN1</name>
<description>ADC AIN1 Pin</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN2</name>
<description>ADC AIN2 Pin</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN3</name>
<description>ADC AIN3 Pin</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN4</name>
<description>ADC AIN4 Pin</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN5</name>
<description>ADC AIN5 Pin</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN6</name>
<description>ADC AIN6 Pin</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN7</name>
<description>ADC AIN7 Pin</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>GND</name>
<description>Internal Ground</description>
<value>0x18</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DSEQSTOP</name>
<description>Stop DMA Sequencing</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>Control B</description>
<addressOffset>0x6</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>LEFTADJ</name>
<description>Left-Adjusted Result</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FREERUN</name>
<description>Free Running Mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CORREN</name>
<description>Digital Correction Logic Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESSEL</name>
<description>Conversion Result Resolution</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>RESSELSelect</name>
<enumeratedValue>
<name>12BIT</name>
<description>12-bit result</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16BIT</name>
<description>For averaging mode output</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>10BIT</name>
<description>10-bit result</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8BIT</name>
<description>8-bit result</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WINMODE</name>
<description>Window Monitor Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>WINMODESelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>No window mode (default)</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>MODE1</name>
<description>RESULT > WINLT</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>MODE2</name>
<description>RESULT < WINUT</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>MODE3</name>
<description>WINLT < RESULT < WINUT</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>MODE4</name>
<description>!(WINLT < RESULT < WINUT)</description>
<value>4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WINSS</name>
<description>Window Single Sample</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>REFCTRL</name>
<description>Reference Control</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>REFSEL</name>
<description>Reference Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>REFSELSelect</name>
<enumeratedValue>
<name>INTREF</name>
<description>Internal Bandgap Reference</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>INTVCC0</name>
<description>1/2 VDDANA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>INTVCC1</name>
<description>VDDANA</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>AREFA</name>
<description>External Reference</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>AREFB</name>
<description>External Reference</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>AREFC</name>
<description>External Reference (only on ADC1)</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>REFCOMP</name>
<description>Reference Buffer Offset Compensation Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AVGCTRL</name>
<description>Average Control</description>
<addressOffset>0xA</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SAMPLENUM</name>
<description>Number of Samples to be Collected</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>SAMPLENUMSelect</name>
<enumeratedValue>
<name>1</name>
<description>1 sample</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2</name>
<description>2 samples</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>4</name>
<description>4 samples</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8</name>
<description>8 samples</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 samples</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>32</name>
<description>32 samples</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64 samples</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>128 samples</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>256 samples</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>512</name>
<description>512 samples</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>1024 samples</description>
<value>0xA</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ADJRES</name>
<description>Adjusting Result / Division Coefficient</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAMPCTRL</name>
<description>Sample Time Control</description>
<addressOffset>0xB</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SAMPLEN</name>
<description>Sampling Time Length</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>OFFCOMP</name>
<description>Comparator Offset Compensation Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WINLT</name>
<description>Window Monitor Lower Threshold</description>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>WINLT</name>
<description>Window Lower Threshold</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>WINUT</name>
<description>Window Monitor Upper Threshold</description>
<addressOffset>0xE</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>WINUT</name>
<description>Window Upper Threshold</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>GAINCORR</name>
<description>Gain Correction</description>
<addressOffset>0x10</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>GAINCORR</name>
<description>Gain Correction Value</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>OFFSETCORR</name>
<description>Offset Correction</description>
<addressOffset>0x12</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>OFFSETCORR</name>
<description>Offset Correction Value</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>SWTRIG</name>
<description>Software Trigger</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>FLUSH</name>
<description>ADC Conversion Flush</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>START</name>
<description>Start ADC Conversion</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x2C</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>RESRDY</name>
<description>Result Ready Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVERRUN</name>
<description>Overrun Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINMON</name>
<description>Window Monitor Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x2D</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>RESRDY</name>
<description>Result Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVERRUN</name>
<description>Overrun Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINMON</name>
<description>Window Monitor Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x2E</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>RESRDY</name>
<description>Result Ready Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVERRUN</name>
<description>Overrun Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINMON</name>
<description>Window Monitor Interrupt Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0x2F</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ADCBUSY</name>
<description>ADC Busy Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WCC</name>
<description>Window Comparator Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>SWRST Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>ENABLE Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INPUTCTRL</name>
<description>Input Control Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>Control B Synchronization Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REFCTRL</name>
<description>Reference Control Synchronization Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AVGCTRL</name>
<description>Average Control Synchronization Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAMPCTRL</name>
<description>Sampling Time Control Synchronization Busy</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINLT</name>
<description>Window Monitor Lower Threshold Synchronization Busy</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINUT</name>
<description>Window Monitor Upper Threshold Synchronization Busy</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GAINCORR</name>
<description>Gain Correction Synchronization Busy</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OFFSETCORR</name>
<description>Offset Correction Synchronization Busy</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG</name>
<description>Software Trigger Synchronization Busy</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DSEQDATA</name>
<description>DMA Sequencial Data</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>DMA Sequential Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DSEQCTRL</name>
<description>DMA Sequential Control</description>
<addressOffset>0x38</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INPUTCTRL</name>
<description>Input Control</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>Control B</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REFCTRL</name>
<description>Reference Control</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AVGCTRL</name>
<description>Average Control</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAMPCTRL</name>
<description>Sampling Time Control</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINLT</name>
<description>Window Monitor Lower Threshold</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINUT</name>
<description>Window Monitor Upper Threshold</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GAINCORR</name>
<description>Gain Correction</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OFFSETCORR</name>
<description>Offset Correction</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AUTOSTART</name>
<description>ADC Auto-Start Conversion</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DSEQSTAT</name>
<description>DMA Sequencial Status</description>
<addressOffset>0x3C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INPUTCTRL</name>
<description>Input Control</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>Control B</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REFCTRL</name>
<description>Reference Control</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AVGCTRL</name>
<description>Average Control</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAMPCTRL</name>
<description>Sampling Time Control</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINLT</name>
<description>Window Monitor Lower Threshold</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINUT</name>
<description>Window Monitor Upper Threshold</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GAINCORR</name>
<description>Gain Correction</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OFFSETCORR</name>
<description>Offset Correction</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSY</name>
<description>DMA Sequencing Busy</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RESULT</name>
<description>Result Conversion Value</description>
<addressOffset>0x40</addressOffset>
<size>16</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>RESULT</name>
<description>Result Conversion Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>RESS</name>
<description>Last Sample Result</description>
<addressOffset>0x44</addressOffset>
<size>16</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>RESS</name>
<description>Last ADC conversion result</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>CALIB</name>
<description>Calibration</description>
<addressOffset>0x48</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BIASCOMP</name>
<description>Bias Comparator Scaling</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>BIASR2R</name>
<description>Bias R2R Ampli scaling</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>BIASREFBUF</name>
<description>Bias Reference Buffer Scaling</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="ADC0">
<name>ADC1</name>
<baseAddress>0x43002000</baseAddress>
<interrupt>
<name>ADC1_OTHER</name>
<value>120</value>
</interrupt>
<interrupt>
<name>ADC1_RESRDY</name>
<value>121</value>
</interrupt>
</peripheral>
<peripheral>
<name>AES</name>
<version>U22382.2.0</version>
<description>Advanced Encryption Standard</description>
<groupName>AES</groupName>
<prependToName>AES_</prependToName>
<baseAddress>0x42002400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x88</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>AES</name>
<value>130</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AESMODE</name>
<description>AES Modes of operation</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>AESMODESelect</name>
<enumeratedValue>
<name>ECB</name>
<description>Electronic code book mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CBC</name>
<description>Cipher block chaining mode</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>OFB</name>
<description>Output feedback mode</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CFB</name>
<description>Cipher feedback mode</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNTER</name>
<description>Counter mode</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CCM</name>
<description>CCM mode</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>GCM</name>
<description>Galois counter mode</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CFBS</name>
<description>Cipher Feedback Block Size</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CFBSSelect</name>
<enumeratedValue>
<name>128BIT</name>
<description>128-bit Input data block for Encryption/Decryption in Cipher Feedback mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>64BIT</name>
<description>64-bit Input data block for Encryption/Decryption in Cipher Feedback mode</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>32BIT</name>
<description>32-bit Input data block for Encryption/Decryption in Cipher Feedback mode</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>16BIT</name>
<description>16-bit Input data block for Encryption/Decryption in Cipher Feedback mode</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>8BIT</name>
<description>8-bit Input data block for Encryption/Decryption in Cipher Feedback mode</description>
<value>0x4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>KEYSIZE</name>
<description>Encryption Key Size</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>KEYSIZESelect</name>
<enumeratedValue>
<name>128BIT</name>
<description>128-bit Key for Encryption / Decryption</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>192BIT</name>
<description>192-bit Key for Encryption / Decryption</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>256BIT</name>
<description>256-bit Key for Encryption / Decryption</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CIPHER</name>
<description>Cipher Mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CIPHERSelect</name>
<enumeratedValue>
<name>DEC</name>
<description>Decryption</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENC</name>
<description>Encryption</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STARTMODE</name>
<description>Start Mode Select</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>STARTMODESelect</name>
<enumeratedValue>
<name>MANUAL</name>
<description>Start Encryption / Decryption in Manual mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AUTO</name>
<description>Start Encryption / Decryption in Auto mode</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LOD</name>
<description>Last Output Data Mode</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>LODSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No effect</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LAST</name>
<description>Start encryption in Last Output Data mode</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>KEYGEN</name>
<description>Last Key Generation</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>KEYGENSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No effect</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LAST</name>
<description>Start Computation of the last NK words of the expanded key</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>XORKEY</name>
<description>XOR Key Operation</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>XORKEYSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No effect</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XOR</name>
<description>The user keyword gets XORed with the previous keyword register content.</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CTYPE</name>
<description>Counter Measure Type</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>Control B</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>START</name>
<description>Start Encryption/Decryption</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NEWMSG</name>
<description>New message</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOM</name>
<description>End of message</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GFMUL</name>
<description>GF Multiplication</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ENCCMP</name>
<description>Encryption Complete Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GFMCMP</name>
<description>GF Multiplication Complete Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x6</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ENCCMP</name>
<description>Encryption Complete Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GFMCMP</name>
<description>GF Multiplication Complete Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status</description>
<addressOffset>0x7</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ENCCMP</name>
<description>Encryption Complete</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GFMCMP</name>
<description>GF Multiplication Complete</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATABUFPTR</name>
<description>Data buffer pointer</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>INDATAPTR</name>
<description>Input Data Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug control</description>
<addressOffset>0x9</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGRUN</name>
<description>Debug Run</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>4</dimIncrement>
<name>KEYWORD[%s]</name>
<description>Keyword n</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>INDATA</name>
<description>Indata</description>
<addressOffset>0x38</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<name>INTVECTV[%s]</name>
<description>Initialisation Vector n</description>
<addressOffset>0x3C</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<name>HASHKEY[%s]</name>
<description>Hash key n</description>
<addressOffset>0x5C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<name>GHASH[%s]</name>
<description>Galois Hash n</description>
<addressOffset>0x6C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>CIPLEN</name>
<description>Cipher Length</description>
<addressOffset>0x80</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>RANDSEED</name>
<description>Random Seed</description>
<addressOffset>0x84</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
</register>
</registers>
</peripheral>
<peripheral>
<name>CCL</name>
<version>U22251.1.0</version>
<description>Configurable Custom Logic</description>
<groupName>CCL</groupName>
<prependToName>CCL_</prependToName>
<baseAddress>0x42003800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x18</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CTRL</name>
<description>Control</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>1</dimIncrement>
<name>SEQCTRL[%s]</name>
<description>SEQ Control x</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SEQSEL</name>
<description>Sequential Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>SEQSELSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Sequential logic is disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DFF</name>
<description>D flip flop</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>JK</name>
<description>JK flip flop</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>LATCH</name>
<description>D latch</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>RS</name>
<description>RS latch</description>
<value>4</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<name>LUTCTRL[%s]</name>
<description>LUT Control x</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>LUT Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FILTSEL</name>
<description>Filter Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>FILTSELSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Filter disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>SYNCH</name>
<description>Synchronizer enabled</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER</name>
<description>Filter enabled</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EDGESEL</name>
<description>Edge Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INSEL0</name>
<description>Input Selection 0</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>INSEL0Select</name>
<enumeratedValue>
<name>MASK</name>
<description>Masked input</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>FEEDBACK</name>
<description>Feedback input source</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>LINK</name>
<description>Linked LUT input source</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>EVENT</name>
<description>Event input source</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>IO</name>
<description>I/O pin input source</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>AC</name>
<description>AC input source</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>TC</name>
<description>TC input source</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>ALTTC</name>
<description>Alternate TC input source</description>
<value>7</value>
</enumeratedValue>
<enumeratedValue>
<name>TCC</name>
<description>TCC input source</description>
<value>8</value>
</enumeratedValue>
<enumeratedValue>
<name>SERCOM</name>
<description>SERCOM input source</description>
<value>9</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>INSEL1</name>
<description>Input Selection 1</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>INSEL1Select</name>
<enumeratedValue>
<name>MASK</name>
<description>Masked input</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FEEDBACK</name>
<description>Feedback input source</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>LINK</name>
<description>Linked LUT input source</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EVENT</name>
<description>Event input source</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>IO</name>
<description>I/O pin input source</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>AC</name>
<description>AC input source</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>TC</name>
<description>TC input source</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>ALTTC</name>
<description>Alternate TC input source</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>TCC</name>
<description>TCC input source</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>SERCOM</name>
<description>SERCOM input source</description>
<value>0x9</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>INSEL2</name>
<description>Input Selection 2</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>INSEL2Select</name>
<enumeratedValue>
<name>MASK</name>
<description>Masked input</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FEEDBACK</name>
<description>Feedback input source</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>LINK</name>
<description>Linked LUT input source</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EVENT</name>
<description>Event input source</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>IO</name>
<description>I/O pin input source</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>AC</name>
<description>AC input source</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>TC</name>
<description>TC input source</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>ALTTC</name>
<description>Alternate TC input source</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>TCC</name>
<description>TCC input source</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>SERCOM</name>
<description>SERCOM input source</description>
<value>0x9</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>INVEI</name>
<description>Inverted Event Input Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUTEI</name>
<description>LUT Event Input Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUTEO</name>
<description>LUT Event Output Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRUTH</name>
<description>Truth Value</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>CMCC</name>
<version>U20156.0.0</version>
<description>Cortex M Cache Controller</description>
<groupName>CMCC</groupName>
<prependToName>CMCC_</prependToName>
<baseAddress>0x41006000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x38</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>TYPE</name>
<description>Cache Type Register</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000012D2</resetValue>
<fields>
<field>
<name>GCLK</name>
<description>dynamic Clock Gating supported</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RRP</name>
<description>Round Robin Policy supported</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAYNUM</name>
<description>Number of Way</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>WAYNUMSelect</name>
<enumeratedValue>
<name>DMAPPED</name>
<description>Direct Mapped Cache</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ARCH2WAY</name>
<description>2-WAY set associative</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>ARCH4WAY</name>
<description>4-WAY set associative</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LCKDOWN</name>
<description>Lock Down supported</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSIZE</name>
<description>Cache Size</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CSIZESelect</name>
<enumeratedValue>
<name>CSIZE_1KB</name>
<description>Cache Size is 1 KB</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CSIZE_2KB</name>
<description>Cache Size is 2 KB</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CSIZE_4KB</name>
<description>Cache Size is 4 KB</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CSIZE_8KB</name>
<description>Cache Size is 8 KB</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>CSIZE_16KB</name>
<description>Cache Size is 16 KB</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>CSIZE_32KB</name>
<description>Cache Size is 32 KB</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>CSIZE_64KB</name>
<description>Cache Size is 64 KB</description>
<value>6</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLSIZE</name>
<description>Cache Line Size</description>
<bitOffset>11</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CLSIZESelect</name>
<enumeratedValue>
<name>CLSIZE_4B</name>
<description>Cache Line Size is 4 bytes</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CLSIZE_8B</name>
<description>Cache Line Size is 8 bytes</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLSIZE_16B</name>
<description>Cache Line Size is 16 bytes</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CLSIZE_32B</name>
<description>Cache Line Size is 32 bytes</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>CLSIZE_64B</name>
<description>Cache Line Size is 64 bytes</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>CLSIZE_128B</name>
<description>Cache Line Size is 128 bytes</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CFG</name>
<description>Cache Configuration Register</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000020</resetValue>
<fields>
<field>
<name>ICDIS</name>
<description>Instruction Cache Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCDIS</name>
<description>Data Cache Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSIZESW</name>
<description>Cache size configured by software</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CSIZESWSelect</name>
<enumeratedValue>
<name>CONF_CSIZE_1KB</name>
<description>The Cache Size is configured to 1KB</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CONF_CSIZE_2KB</name>
<description>The Cache Size is configured to 2KB</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CONF_CSIZE_4KB</name>
<description>The Cache Size is configured to 4KB</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CONF_CSIZE_8KB</name>
<description>The Cache Size is configured to 8KB</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>CONF_CSIZE_16KB</name>
<description>The Cache Size is configured to 16KB</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>CONF_CSIZE_32KB</name>
<description>The Cache Size is configured to 32KB</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>CONF_CSIZE_64KB</name>
<description>The Cache Size is configured to 64KB</description>
<value>6</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRL</name>
<description>Cache Control Register</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CEN</name>
<description>Cache Controller Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Cache Status Register</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CSTS</name>
<description>Cache Controller Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>LCKWAY</name>
<description>Cache Lock per Way Register</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LCKWAY</name>
<description>Lockdown way Register</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>MAINT0</name>
<description>Cache Maintenance Register 0</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INVALL</name>
<description>Cache Controller invalidate All</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MAINT1</name>
<description>Cache Maintenance Register 1</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INDEX</name>
<description>Invalidate Index</description>
<bitOffset>4</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>WAY</name>
<description>Invalidate Way</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>WAYSelect</name>
<enumeratedValue>
<name>WAY0</name>
<description>Way 0 is selection for index invalidation</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAY1</name>
<description>Way 1 is selection for index invalidation</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>WAY2</name>
<description>Way 2 is selection for index invalidation</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>WAY3</name>
<description>Way 3 is selection for index invalidation</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>MCFG</name>
<description>Cache Monitor Configuration Register</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MODE</name>
<description>Cache Controller Monitor Counter Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>CYCLE_COUNT</name>
<description>Cycle counter</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>IHIT_COUNT</name>
<description>Instruction hit counter</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>DHIT_COUNT</name>
<description>Data hit counter</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>MEN</name>
<description>Cache Monitor Enable Register</description>
<addressOffset>0x2C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MENABLE</name>
<description>Cache Controller Monitor Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MCTRL</name>
<description>Cache Monitor Control Register</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Cache Controller Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MSR</name>
<description>Cache Monitor Status Register</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EVENT_CNT</name>
<description>Monitor Event Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DAC</name>
<version>U25021.0.0</version>
<description>Digital-to-Analog Converter</description>
<groupName>DAC</groupName>
<prependToName>DAC_</prependToName>
<baseAddress>0x43002400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x20</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>DAC_OTHER</name>
<value>123</value>
</interrupt>
<interrupt>
<name>DAC_EMPTY_0</name>
<value>124</value>
</interrupt>
<interrupt>
<name>DAC_EMPTY_1</name>
<value>125</value>
</interrupt>
<interrupt>
<name>DAC_RESRDY_0</name>
<value>126</value>
</interrupt>
<interrupt>
<name>DAC_RESRDY_1</name>
<value>127</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable DAC Controller</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>Control B</description>
<addressOffset>0x1</addressOffset>
<size>8</size>
<resetValue>0x02</resetValue>
<fields>
<field>
<name>DIFF</name>
<description>Differential mode enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REFSEL</name>
<description>Reference Selection for DAC0/1</description>
<bitOffset>1</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>REFSELSelect</name>
<enumeratedValue>
<name>VREFPU</name>
<description>External reference unbuffered</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VDDANA</name>
<description>Analog supply</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>VREFPB</name>
<description>External reference buffered</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>INTREF</name>
<description>Internal bandgap reference</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x2</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>STARTEI0</name>
<description>Start Conversion Event Input DAC 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STARTEI1</name>
<description>Start Conversion Event Input DAC 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTYEO0</name>
<description>Data Buffer Empty Event Output DAC 0</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTYEO1</name>
<description>Data Buffer Empty Event Output DAC 1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEI0</name>
<description>Enable Invertion of DAC 0 input event</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEI1</name>
<description>Enable Invertion of DAC 1 input event</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESRDYEO0</name>
<description>Result Ready Event Output 0</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESRDYEO1</name>
<description>Result Ready Event Output 1</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>UNDERRUN0</name>
<description>Underrun 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UNDERRUN1</name>
<description>Underrun 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTY0</name>
<description>Data Buffer 0 Empty Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTY1</name>
<description>Data Buffer 1 Empty Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESRDY0</name>
<description>Result 0 Ready Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESRDY1</name>
<description>Result 1 Ready Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVERRUN0</name>
<description>Overrun 0 Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVERRUN1</name>
<description>Overrun 1 Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>UNDERRUN0</name>
<description>Underrun 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UNDERRUN1</name>
<description>Underrun 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTY0</name>
<description>Data Buffer 0 Empty Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTY1</name>
<description>Data Buffer 1 Empty Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESRDY0</name>
<description>Result 0 Ready Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESRDY1</name>
<description>Result 1 Ready Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVERRUN0</name>
<description>Overrun 0 Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVERRUN1</name>
<description>Overrun 1 Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x6</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>UNDERRUN0</name>
<description>Result 0 Underrun</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UNDERRUN1</name>
<description>Result 1 Underrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTY0</name>
<description>Data Buffer 0 Empty</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTY1</name>
<description>Data Buffer 1 Empty</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESRDY0</name>
<description>Result 0 Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESRDY1</name>
<description>Result 1 Ready</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVERRUN0</name>
<description>Result 0 Overrun</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVERRUN1</name>
<description>Result 1 Overrun</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0x7</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>READY0</name>
<description>DAC 0 Startup Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READY1</name>
<description>DAC 1 Startup Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOC0</name>
<description>DAC 0 End of Conversion</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOC1</name>
<description>DAC 1 End of Conversion</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>DAC Enable Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATA0</name>
<description>Data DAC 0</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATA1</name>
<description>Data DAC 1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATABUF0</name>
<description>Data Buffer DAC 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATABUF1</name>
<description>Data Buffer DAC 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>2</dimIncrement>
<name>DACCTRL[%s]</name>
<description>DAC n Control</description>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>LEFTADJ</name>
<description>Left Adjusted Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable DAC0</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTRL</name>
<description>Current Control</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CCTRLSelect</name>
<enumeratedValue>
<name>CC100K</name>
<description>100kSPS</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CC1M</name>
<description>500kSPS</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CC12M</name>
<description>1MSPS</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FEXT</name>
<description>Standalone Filter</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DITHER</name>
<description>Dithering Mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REFRESH</name>
<description>Refresh period</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>REFRESHSelect</name>
<enumeratedValue>
<name>REFRESH_0</name>
<description>Do not Refresh</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_1</name>
<description>Refresh every 30 us</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_2</name>
<description>Refresh every 60 us</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_3</name>
<description>Refresh every 90 us</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_4</name>
<description>Refresh every 120 us</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_5</name>
<description>Refresh every 150 us</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_6</name>
<description>Refresh every 180 us</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_7</name>
<description>Refresh every 210 us</description>
<value>7</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_8</name>
<description>Refresh every 240 us</description>
<value>8</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_9</name>
<description>Refresh every 270 us</description>
<value>9</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_10</name>
<description>Refresh every 300 us</description>
<value>10</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_11</name>
<description>Refresh every 330 us</description>
<value>11</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_12</name>
<description>Refresh every 360 us</description>
<value>12</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_13</name>
<description>Refresh every 390 us</description>
<value>13</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_14</name>
<description>Refresh every 420 us</description>
<value>14</value>
</enumeratedValue>
<enumeratedValue>
<name>REFRESH_15</name>
<description>Refresh every 450 us</description>
<value>15</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>OSR</name>
<description>Sampling Rate</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>OSRSelect</name>
<enumeratedValue>
<name>OSR_1</name>
<description>No Over Sampling</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>OSR_2</name>
<description>2x Over Sampling Ratio</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>OSR_4</name>
<description>4x Over Sampling Ratio</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>OSR_8</name>
<description>8x Over Sampling Ratio</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>OSR_16</name>
<description>16x Over Sampling Ratio</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>OSR_32</name>
<description>32x Over Sampling Ratio</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>2</dimIncrement>
<name>DATA[%s]</name>
<description>DAC n Data</description>
<addressOffset>0x10</addressOffset>
<size>16</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>DAC0 Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>2</dimIncrement>
<name>DATABUF[%s]</name>
<description>DAC n Data Buffer</description>
<addressOffset>0x14</addressOffset>
<size>16</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DATABUF</name>
<description>DAC0 Data Buffer</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGRUN</name>
<description>Debug Run</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>2</dimIncrement>
<name>RESULT[%s]</name>
<description>Filter Result</description>
<addressOffset>0x1C</addressOffset>
<size>16</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>RESULT</name>
<description>Filter Result</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DMAC</name>
<version>U25031.0.1</version>
<description>Direct Memory Access Controller</description>
<groupName>DMAC</groupName>
<prependToName>DMAC_</prependToName>
<baseAddress>0x4100A000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x360</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>DMAC_0</name>
<value>31</value>
</interrupt>
<interrupt>
<name>DMAC_1</name>
<value>32</value>
</interrupt>
<interrupt>
<name>DMAC_2</name>
<value>33</value>
</interrupt>
<interrupt>
<name>DMAC_3</name>
<value>34</value>
</interrupt>
<interrupt>
<name>DMAC_OTHER</name>
<value>35</value>
</interrupt>
<registers>
<register>
<name>CTRL</name>
<description>Control</description>
<addressOffset>0x0</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAENABLE</name>
<description>DMA Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLEN0</name>
<description>Priority Level 0 Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLEN1</name>
<description>Priority Level 1 Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLEN2</name>
<description>Priority Level 2 Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLEN3</name>
<description>Priority Level 3 Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRCCTRL</name>
<description>CRC Control</description>
<addressOffset>0x2</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CRCBEATSIZE</name>
<description>CRC Beat Size</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CRCBEATSIZESelect</name>
<enumeratedValue>
<name>BYTE</name>
<description>8-bit bus transfer</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HWORD</name>
<description>16-bit bus transfer</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>32-bit bus transfer</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CRCPOLY</name>
<description>CRC Polynomial Type</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CRCPOLYSelect</name>
<enumeratedValue>
<name>CRC16</name>
<description>CRC-16 (CRC-CCITT)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CRC32</name>
<description>CRC32 (IEEE 802.3)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CRCSRC</name>
<description>CRC Input Source</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<enumeratedValues>
<name>CRCSRCSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>CRC Disabled</description>
<value>0x00</value>
</enumeratedValue>
<enumeratedValue>
<name>IO</name>
<description>I/O interface</description>
<value>0x01</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CRCMODE</name>
<description>CRC Operating Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CRCMODESelect</name>
<enumeratedValue>
<name>DEFAULT</name>
<description>Default operating mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CRCMON</name>
<description>Memory CRC monitor operating mode</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CRCGEN</name>
<description>Memory CRC generation operating mode</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CRCDATAIN</name>
<description>CRC Data Input</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRCDATAIN</name>
<description>CRC Data Input</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRCCHKSUM</name>
<description>CRC Checksum</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CRCCHKSUM</name>
<description>CRC Checksum</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRCSTATUS</name>
<description>CRC Status</description>
<addressOffset>0xC</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>CRCBUSY</name>
<description>CRC Module Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCZERO</name>
<description>CRC Zero</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCERR</name>
<description>CRC Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0xD</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGRUN</name>
<description>Debug Run</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SWTRIGCTRL</name>
<description>Software Trigger Control</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWTRIG0</name>
<description>Channel 0 Software Trigger</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG1</name>
<description>Channel 1 Software Trigger</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG2</name>
<description>Channel 2 Software Trigger</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG3</name>
<description>Channel 3 Software Trigger</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG4</name>
<description>Channel 4 Software Trigger</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG5</name>
<description>Channel 5 Software Trigger</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG6</name>
<description>Channel 6 Software Trigger</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG7</name>
<description>Channel 7 Software Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG8</name>
<description>Channel 8 Software Trigger</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG9</name>
<description>Channel 9 Software Trigger</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG10</name>
<description>Channel 10 Software Trigger</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG11</name>
<description>Channel 11 Software Trigger</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG12</name>
<description>Channel 12 Software Trigger</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG13</name>
<description>Channel 13 Software Trigger</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG14</name>
<description>Channel 14 Software Trigger</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG15</name>
<description>Channel 15 Software Trigger</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG16</name>
<description>Channel 16 Software Trigger</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG17</name>
<description>Channel 17 Software Trigger</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG18</name>
<description>Channel 18 Software Trigger</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG19</name>
<description>Channel 19 Software Trigger</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG20</name>
<description>Channel 20 Software Trigger</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG21</name>
<description>Channel 21 Software Trigger</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG22</name>
<description>Channel 22 Software Trigger</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG23</name>
<description>Channel 23 Software Trigger</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG24</name>
<description>Channel 24 Software Trigger</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG25</name>
<description>Channel 25 Software Trigger</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG26</name>
<description>Channel 26 Software Trigger</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG27</name>
<description>Channel 27 Software Trigger</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG28</name>
<description>Channel 28 Software Trigger</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG29</name>
<description>Channel 29 Software Trigger</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG30</name>
<description>Channel 30 Software Trigger</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG31</name>
<description>Channel 31 Software Trigger</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PRICTRL0</name>
<description>Priority Control 0</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<resetValue>0x40404040</resetValue>
<fields>
<field>
<name>LVLPRI0</name>
<description>Level 0 Channel Priority Number</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>QOS0</name>
<description>Level 0 Quality of Service</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>QOS0Select</name>
<enumeratedValue>
<name>REGULAR</name>
<description>Regular delivery</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>SHORTAGE</name>
<description>Bandwidth shortage</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>SENSITIVE</name>
<description>Latency sensitive</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CRITICAL</name>
<description>Latency critical</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RRLVLEN0</name>
<description>Level 0 Round-Robin Scheduling Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLPRI1</name>
<description>Level 1 Channel Priority Number</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>QOS1</name>
<description>Level 1 Quality of Service</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>QOS1Select</name>
<enumeratedValue>
<name>REGULAR</name>
<description>Regular delivery</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>SHORTAGE</name>
<description>Bandwidth shortage</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>SENSITIVE</name>
<description>Latency sensitive</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CRITICAL</name>
<description>Latency critical</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RRLVLEN1</name>
<description>Level 1 Round-Robin Scheduling Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLPRI2</name>
<description>Level 2 Channel Priority Number</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>QOS2</name>
<description>Level 2 Quality of Service</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>QOS2Select</name>
<enumeratedValue>
<name>REGULAR</name>
<description>Regular delivery</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>SHORTAGE</name>
<description>Bandwidth shortage</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>SENSITIVE</name>
<description>Latency sensitive</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CRITICAL</name>
<description>Latency critical</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RRLVLEN2</name>
<description>Level 2 Round-Robin Scheduling Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLPRI3</name>
<description>Level 3 Channel Priority Number</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>QOS3</name>
<description>Level 3 Quality of Service</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>QOS3Select</name>
<enumeratedValue>
<name>REGULAR</name>
<description>Regular delivery</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>SHORTAGE</name>
<description>Bandwidth shortage</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>SENSITIVE</name>
<description>Latency sensitive</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CRITICAL</name>
<description>Latency critical</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RRLVLEN3</name>
<description>Level 3 Round-Robin Scheduling Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTPEND</name>
<description>Interrupt Pending</description>
<addressOffset>0x20</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>ID</name>
<description>Channel ID</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TERR</name>
<description>Transfer Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCMPL</name>
<description>Transfer Complete</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>Channel Suspend</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCERR</name>
<description>CRC Error</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FERR</name>
<description>Fetch Error</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSY</name>
<description>Busy</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEND</name>
<description>Pending</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTSTATUS</name>
<description>Interrupt Status</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHINT0</name>
<description>Channel 0 Pending Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT1</name>
<description>Channel 1 Pending Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT2</name>
<description>Channel 2 Pending Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT3</name>
<description>Channel 3 Pending Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT4</name>
<description>Channel 4 Pending Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT5</name>
<description>Channel 5 Pending Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT6</name>
<description>Channel 6 Pending Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT7</name>
<description>Channel 7 Pending Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT8</name>
<description>Channel 8 Pending Interrupt</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT9</name>
<description>Channel 9 Pending Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT10</name>
<description>Channel 10 Pending Interrupt</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT11</name>
<description>Channel 11 Pending Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT12</name>
<description>Channel 12 Pending Interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT13</name>
<description>Channel 13 Pending Interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT14</name>
<description>Channel 14 Pending Interrupt</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT15</name>
<description>Channel 15 Pending Interrupt</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT16</name>
<description>Channel 16 Pending Interrupt</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT17</name>
<description>Channel 17 Pending Interrupt</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT18</name>
<description>Channel 18 Pending Interrupt</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT19</name>
<description>Channel 19 Pending Interrupt</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT20</name>
<description>Channel 20 Pending Interrupt</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT21</name>
<description>Channel 21 Pending Interrupt</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT22</name>
<description>Channel 22 Pending Interrupt</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT23</name>
<description>Channel 23 Pending Interrupt</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT24</name>
<description>Channel 24 Pending Interrupt</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT25</name>
<description>Channel 25 Pending Interrupt</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT26</name>
<description>Channel 26 Pending Interrupt</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT27</name>
<description>Channel 27 Pending Interrupt</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT28</name>
<description>Channel 28 Pending Interrupt</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT29</name>
<description>Channel 29 Pending Interrupt</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT30</name>
<description>Channel 30 Pending Interrupt</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT31</name>
<description>Channel 31 Pending Interrupt</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BUSYCH</name>
<description>Busy Channels</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BUSYCH0</name>
<description>Busy Channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH1</name>
<description>Busy Channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH2</name>
<description>Busy Channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH3</name>
<description>Busy Channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH4</name>
<description>Busy Channel 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH5</name>
<description>Busy Channel 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH6</name>
<description>Busy Channel 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH7</name>
<description>Busy Channel 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH8</name>
<description>Busy Channel 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH9</name>
<description>Busy Channel 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH10</name>
<description>Busy Channel 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH11</name>
<description>Busy Channel 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH12</name>
<description>Busy Channel 12</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH13</name>
<description>Busy Channel 13</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH14</name>
<description>Busy Channel 14</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH15</name>
<description>Busy Channel 15</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH16</name>
<description>Busy Channel 16</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH17</name>
<description>Busy Channel 17</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH18</name>
<description>Busy Channel 18</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH19</name>
<description>Busy Channel 19</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH20</name>
<description>Busy Channel 20</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH21</name>
<description>Busy Channel 21</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH22</name>
<description>Busy Channel 22</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH23</name>
<description>Busy Channel 23</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH24</name>
<description>Busy Channel 24</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH25</name>
<description>Busy Channel 25</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH26</name>
<description>Busy Channel 26</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH27</name>
<description>Busy Channel 27</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH28</name>
<description>Busy Channel 28</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH29</name>
<description>Busy Channel 29</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH30</name>
<description>Busy Channel 30</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH31</name>
<description>Busy Channel 31</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PENDCH</name>
<description>Pending Channels</description>
<addressOffset>0x2C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PENDCH0</name>
<description>Pending Channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH1</name>
<description>Pending Channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH2</name>
<description>Pending Channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH3</name>
<description>Pending Channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH4</name>
<description>Pending Channel 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH5</name>
<description>Pending Channel 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH6</name>
<description>Pending Channel 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH7</name>
<description>Pending Channel 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH8</name>
<description>Pending Channel 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH9</name>
<description>Pending Channel 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH10</name>
<description>Pending Channel 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH11</name>
<description>Pending Channel 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH12</name>
<description>Pending Channel 12</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH13</name>
<description>Pending Channel 13</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH14</name>
<description>Pending Channel 14</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH15</name>
<description>Pending Channel 15</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH16</name>
<description>Pending Channel 16</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH17</name>
<description>Pending Channel 17</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH18</name>
<description>Pending Channel 18</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH19</name>
<description>Pending Channel 19</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH20</name>
<description>Pending Channel 20</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH21</name>
<description>Pending Channel 21</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH22</name>
<description>Pending Channel 22</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH23</name>
<description>Pending Channel 23</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH24</name>
<description>Pending Channel 24</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH25</name>
<description>Pending Channel 25</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH26</name>
<description>Pending Channel 26</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH27</name>
<description>Pending Channel 27</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH28</name>
<description>Pending Channel 28</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH29</name>
<description>Pending Channel 29</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH30</name>
<description>Pending Channel 30</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDCH31</name>
<description>Pending Channel 31</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ACTIVE</name>
<description>Active Channel and Levels</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LVLEX0</name>
<description>Level 0 Channel Trigger Request Executing</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLEX1</name>
<description>Level 1 Channel Trigger Request Executing</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLEX2</name>
<description>Level 2 Channel Trigger Request Executing</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLEX3</name>
<description>Level 3 Channel Trigger Request Executing</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ID</name>
<description>Active Channel ID</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>ABUSY</name>
<description>Active Channel Busy</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BTCNT</name>
<description>Active Channel Block Transfer Count</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>BASEADDR</name>
<description>Descriptor Memory Section Base Address</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BASEADDR</name>
<description>Descriptor Memory Base Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>WRBADDR</name>
<description>Write-Back Memory Section Base Address</description>
<addressOffset>0x38</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WRBADDR</name>
<description>Write-Back Memory Base Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<cluster>
<dim>32</dim>
<dimIncrement>0x10</dimIncrement>
<name>CHANNEL[%s]</name>
<description/>
<addressOffset>0x40</addressOffset>
<register>
<name>CHCTRLA</name>
<description>Channel n Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Channel Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Channel Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Channel Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRIGSRC</name>
<description>Trigger Source</description>
<bitOffset>8</bitOffset>
<bitWidth>7</bitWidth>
<enumeratedValues>
<name>TRIGSRCSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Only software/event triggers</description>
<value>0</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRIGACT</name>
<description>Trigger Action</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>TRIGACTSelect</name>
<enumeratedValue>
<name>BLOCK</name>
<description>One trigger required for each block transfer</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>BURST</name>
<description>One trigger required for each burst transfer</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSACTION</name>
<description>One trigger required for each transaction</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BURSTLEN</name>
<description>Burst Length</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>BURSTLENSelect</name>
<enumeratedValue>
<name>SINGLE</name>
<description>Single-beat burst length</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BEAT</name>
<description>2-beats burst length</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>3BEAT</name>
<description>3-beats burst length</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>4BEAT</name>
<description>4-beats burst length</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>5BEAT</name>
<description>5-beats burst length</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>6BEAT</name>
<description>6-beats burst length</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>7BEAT</name>
<description>7-beats burst length</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>8BEAT</name>
<description>8-beats burst length</description>
<value>7</value>
</enumeratedValue>
<enumeratedValue>
<name>9BEAT</name>
<description>9-beats burst length</description>
<value>8</value>
</enumeratedValue>
<enumeratedValue>
<name>10BEAT</name>
<description>10-beats burst length</description>
<value>9</value>
</enumeratedValue>
<enumeratedValue>
<name>11BEAT</name>
<description>11-beats burst length</description>
<value>10</value>
</enumeratedValue>
<enumeratedValue>
<name>12BEAT</name>
<description>12-beats burst length</description>
<value>11</value>
</enumeratedValue>
<enumeratedValue>
<name>13BEAT</name>
<description>13-beats burst length</description>
<value>12</value>
</enumeratedValue>
<enumeratedValue>
<name>14BEAT</name>
<description>14-beats burst length</description>
<value>13</value>
</enumeratedValue>
<enumeratedValue>
<name>15BEAT</name>
<description>15-beats burst length</description>
<value>14</value>
</enumeratedValue>
<enumeratedValue>
<name>16BEAT</name>
<description>16-beats burst length</description>
<value>15</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>THRESHOLD</name>
<description>FIFO Threshold</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>THRESHOLDSelect</name>
<enumeratedValue>
<name>1BEAT</name>
<description>Destination write starts after each beat source address read</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BEATS</name>
<description>Destination write starts after 2-beats source address read</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>4BEATS</name>
<description>Destination write starts after 4-beats source address read</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>8BEATS</name>
<description>Destination write starts after 8-beats source address read</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CHCTRLB</name>
<description>Channel n Control B</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>CMD</name>
<description>Software Command</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NOACT</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SUSPEND</name>
<description>Channel suspend operation</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESUME</name>
<description>Channel resume operation</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CHPRILVL</name>
<description>Channel n Priority Level</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>PRILVL</name>
<description>Channel Priority Level</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PRILVLSelect</name>
<enumeratedValue>
<name>LVL0</name>
<description>Channel Priority Level 0 (Lowest Level)</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LVL1</name>
<description>Channel Priority Level 1</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>LVL2</name>
<description>Channel Priority Level 2</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>LVL3</name>
<description>Channel Priority Level 3 (Highest Level)</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CHEVCTRL</name>
<description>Channel n Event Control</description>
<addressOffset>0x6</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>EVACT</name>
<description>Channel Event Input Action</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>EVACTSelect</name>
<enumeratedValue>
<name>NOACT</name>
<description>No action</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>TRIG</name>
<description>Transfer and periodic transfer trigger</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CTRIG</name>
<description>Conditional transfer trigger</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CBLOCK</name>
<description>Conditional block transfer</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>SUSPEND</name>
<description>Channel suspend operation</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>RESUME</name>
<description>Channel resume operation</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>SSKIP</name>
<description>Skip next block suspend action</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>INCPRI</name>
<description>Increase priority</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EVOMODE</name>
<description>Channel Event Output Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>EVOMODESelect</name>
<enumeratedValue>
<name>DEFAULT</name>
<description>Block event output selection. Refer to BTCTRL.EVOSEL for available selections.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>TRIGACT</name>
<description>Ongoing trigger action</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EVIE</name>
<description>Channel Event Input Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVOE</name>
<description>Channel Event Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHINTENCLR</name>
<description>Channel n Interrupt Enable Clear</description>
<addressOffset>0xC</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>TERR</name>
<description>Channel Transfer Error Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCMPL</name>
<description>Channel Transfer Complete Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>Channel Suspend Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHINTENSET</name>
<description>Channel n Interrupt Enable Set</description>
<addressOffset>0xD</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>TERR</name>
<description>Channel Transfer Error Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCMPL</name>
<description>Channel Transfer Complete Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>Channel Suspend Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHINTFLAG</name>
<description>Channel n Interrupt Flag Status and Clear</description>
<addressOffset>0xE</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>TERR</name>
<description>Channel Transfer Error</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCMPL</name>
<description>Channel Transfer Complete</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>Channel Suspend</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHSTATUS</name>
<description>Channel n Status</description>
<addressOffset>0xF</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>PEND</name>
<description>Channel Pending</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSY</name>
<description>Channel Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FERR</name>
<description>Channel Fetch Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCERR</name>
<description>Channel CRC Error</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster>
</registers>
</peripheral>
<peripheral>
<name>DSU</name>
<version>U24101.0.0</version>
<description>Device Service Unit</description>
<groupName>DSU</groupName>
<prependToName>DSU_</prependToName>
<baseAddress>0x41002000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x2000</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CTRL</name>
<description>Control</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<access>write-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRC</name>
<description>32-bit Cyclic Redundancy Code</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MBIST</name>
<description>Memory built-in self-test</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CE</name>
<description>Chip-Erase</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARR</name>
<description>Auxiliary Row Read</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SMSA</name>
<description>Start Memory Stream Access</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSA</name>
<description>Status A</description>
<addressOffset>0x1</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DONE</name>
<description>Done</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRSTEXT</name>
<description>CPU Reset Phase Extension</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BERR</name>
<description>Bus Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAIL</name>
<description>Failure</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERR</name>
<description>Protection Error</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSB</name>
<description>Status B</description>
<addressOffset>0x2</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>PROT</name>
<description>Protected</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBGPRES</name>
<description>Debugger Present</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCCD0</name>
<description>Debug Communication Channel 0 Dirty</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCCD1</name>
<description>Debug Communication Channel 1 Dirty</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPE</name>
<description>Hot-Plugging Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CELCK</name>
<description>Chip Erase Locked</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCCD0</name>
<description>Test Debug Communication Channel 0 Dirty</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TDCCD1</name>
<description>Test Debug Communication Channel 1 Dirty</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ADDR</name>
<description>Address</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>AMOD</name>
<description>Access Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ADDR</name>
<description>Address</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
</field>
</fields>
</register>
<register>
<name>LENGTH</name>
<description>Length</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LENGTH</name>
<description>Length</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>Data</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<name>DCC[%s]</name>
<description>Debug Communication Channel n</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DID</name>
<description>Device Identification</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x60060206</resetValue>
<fields>
<field>
<name>DEVSEL</name>
<description>Device Select</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>REVISION</name>
<description>Revision Number</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DIE</name>
<description>Die Number</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>SERIES</name>
<description>Series</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<enumeratedValues>
<name>SERIESSelect</name>
<enumeratedValue>
<name>0</name>
<description>Cortex-M0+ processor, basic feature set</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>Cortex-M0+ processor, USB</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FAMILY</name>
<description>Family</description>
<bitOffset>23</bitOffset>
<bitWidth>5</bitWidth>
<enumeratedValues>
<name>FAMILYSelect</name>
<enumeratedValue>
<name>0</name>
<description>General purpose microcontroller</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>PicoPower</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PROCESSOR</name>
<description>Processor</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>PROCESSORSelect</name>
<enumeratedValue>
<name>CM0P</name>
<description>Cortex-M0+</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CM23</name>
<description>Cortex-M23</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CM3</name>
<description>Cortex-M3</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CM4</name>
<description>Cortex-M4</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CM4F</name>
<description>Cortex-M4 with FPU</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CM33</name>
<description>Cortex-M33</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CFG</name>
<description>Configuration</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<resetValue>0x00000002</resetValue>
<fields>
<field>
<name>LQOS</name>
<description>Latency Quality Of Service</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DCCDMALEVEL</name>
<description>DMA Trigger Level</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DCCDMALEVELSelect</name>
<enumeratedValue>
<name>EMPTY</name>
<description>Trigger rises when DCC is empty</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>FULL</name>
<description>Trigger rises when DCC is full</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ETBRAMEN</name>
<description>Trace Control</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<name>DCFG[%s]</name>
<description>Device Configuration</description>
<addressOffset>0xF0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DCFG</name>
<description>Device Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>ENTRY0</name>
<description>CoreSight ROM Table Entry 0</description>
<addressOffset>0x1000</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x9F0FC002</resetValue>
<fields>
<field>
<name>EPRES</name>
<description>Entry Present</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FMT</name>
<description>Format</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDOFF</name>
<description>Address Offset</description>
<bitOffset>12</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<name>ENTRY1</name>
<description>CoreSight ROM Table Entry 1</description>
<addressOffset>0x1004</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>END</name>
<description>CoreSight ROM Table End</description>
<addressOffset>0x1008</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>END</name>
<description>End Marker</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MEMTYPE</name>
<description>CoreSight ROM Table Memory Type</description>
<addressOffset>0x1FCC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SMEMP</name>
<description>System Memory Present</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PID4</name>
<description>Peripheral Identification 4</description>
<addressOffset>0x1FD0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>JEPCC</name>
<description>JEP-106 Continuation Code</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FKBC</name>
<description>4KB count</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>PID5</name>
<description>Peripheral Identification 5</description>
<addressOffset>0x1FD4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>PID6</name>
<description>Peripheral Identification 6</description>
<addressOffset>0x1FD8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>PID7</name>
<description>Peripheral Identification 7</description>
<addressOffset>0x1FDC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>PID0</name>
<description>Peripheral Identification 0</description>
<addressOffset>0x1FE0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000D0</resetValue>
<fields>
<field>
<name>PARTNBL</name>
<description>Part Number Low</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>PID1</name>
<description>Peripheral Identification 1</description>
<addressOffset>0x1FE4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000FC</resetValue>
<fields>
<field>
<name>PARTNBH</name>
<description>Part Number High</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>JEPIDCL</name>
<description>Low part of the JEP-106 Identity Code</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>PID2</name>
<description>Peripheral Identification 2</description>
<addressOffset>0x1FE8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000009</resetValue>
<fields>
<field>
<name>JEPIDCH</name>
<description>JEP-106 Identity Code High</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>JEPU</name>
<description>JEP-106 Identity Code is used</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REVISION</name>
<description>Revision Number</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>PID3</name>
<description>Peripheral Identification 3</description>
<addressOffset>0x1FEC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CUSMOD</name>
<description>ARM CUSMOD</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>REVAND</name>
<description>Revision Number</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CID0</name>
<description>Component Identification 0</description>
<addressOffset>0x1FF0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0000000D</resetValue>
<fields>
<field>
<name>PREAMBLEB0</name>
<description>Preamble Byte 0</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>CID1</name>
<description>Component Identification 1</description>
<addressOffset>0x1FF4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000010</resetValue>
<fields>
<field>
<name>PREAMBLE</name>
<description>Preamble</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CCLASS</name>
<description>Component Class</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CID2</name>
<description>Component Identification 2</description>
<addressOffset>0x1FF8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000005</resetValue>
<fields>
<field>
<name>PREAMBLEB2</name>
<description>Preamble Byte 2</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>CID3</name>
<description>Component Identification 3</description>
<addressOffset>0x1FFC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000B1</resetValue>
<fields>
<field>
<name>PREAMBLEB3</name>
<description>Preamble Byte 3</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>EIC</name>
<version>U22543.0.0</version>
<description>External Interrupt Controller</description>
<groupName>EIC</groupName>
<prependToName>EIC_</prependToName>
<baseAddress>0x40002800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x3C</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>EIC_EXTINT_0</name>
<value>12</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_1</name>
<value>13</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_2</name>
<value>14</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_3</name>
<value>15</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_4</name>
<value>16</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_5</name>
<value>17</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_6</name>
<value>18</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_7</name>
<value>19</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_8</name>
<value>20</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_9</name>
<value>21</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_10</name>
<value>22</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_11</name>
<value>23</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_12</name>
<value>24</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_13</name>
<value>25</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_14</name>
<value>26</value>
</interrupt>
<interrupt>
<name>EIC_EXTINT_15</name>
<value>27</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKSEL</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CKSELSelect</name>
<enumeratedValue>
<name>CLK_GCLK</name>
<description>Clocked by GCLK</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_ULP32K</name>
<description>Clocked by ULP32K</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>NMICTRL</name>
<description>Non-Maskable Interrupt Control</description>
<addressOffset>0x1</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>NMISENSE</name>
<description>Non-Maskable Interrupt Sense Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>NMISENSESelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising-edge detection</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling-edge detection</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both-edges detection</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High-level detection</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low-level detection</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NMIFILTEN</name>
<description>Non-Maskable Interrupt Filter Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NMIASYNCH</name>
<description>Asynchronous Edge Detection Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>NMIASYNCHSelect</name>
<enumeratedValue>
<name>SYNC</name>
<description>Edge detection is clock synchronously operated</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ASYNC</name>
<description>Edge detection is clock asynchronously operated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>NMIFLAG</name>
<description>Non-Maskable Interrupt Flag Status and Clear</description>
<addressOffset>0x2</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>NMI</name>
<description>Non-Maskable Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable Synchronization Busy Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXTINTEO</name>
<description>External Interrupt Event Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXTINT</name>
<description>External Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXTINT</name>
<description>External Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EXTINT</name>
<description>External Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>ASYNCH</name>
<description>External Interrupt Asynchronous Mode</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ASYNCH</name>
<description>Asynchronous Edge Detection Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<enumeratedValues>
<name>ASYNCHSelect</name>
<enumeratedValue>
<name>SYNC</name>
<description>Edge detection is clock synchronously operated</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ASYNC</name>
<description>Edge detection is clock asynchronously operated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<name>CONFIG[%s]</name>
<description>External Interrupt Sense Configuration</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SENSE0</name>
<description>Input Sense Configuration 0</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE0Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN0</name>
<description>Filter Enable 0</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE1</name>
<description>Input Sense Configuration 1</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE1Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN1</name>
<description>Filter Enable 1</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE2</name>
<description>Input Sense Configuration 2</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE2Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN2</name>
<description>Filter Enable 2</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE3</name>
<description>Input Sense Configuration 3</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE3Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN3</name>
<description>Filter Enable 3</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE4</name>
<description>Input Sense Configuration 4</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE4Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN4</name>
<description>Filter Enable 4</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE5</name>
<description>Input Sense Configuration 5</description>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE5Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN5</name>
<description>Filter Enable 5</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE6</name>
<description>Input Sense Configuration 6</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE6Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN6</name>
<description>Filter Enable 6</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE7</name>
<description>Input Sense Configuration 7</description>
<bitOffset>28</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE7Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN7</name>
<description>Filter Enable 7</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DEBOUNCEN</name>
<description>Debouncer Enable</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DEBOUNCEN</name>
<description>Debouncer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DPRESCALER</name>
<description>Debouncer Prescaler</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PRESCALER0</name>
<description>Debouncer Prescaler</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PRESCALER0Select</name>
<enumeratedValue>
<name>DIV2</name>
<description>EIC clock divided by 2</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>EIC clock divided by 4</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>EIC clock divided by 8</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>EIC clock divided by 16</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>EIC clock divided by 32</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>EIC clock divided by 64</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>EIC clock divided by 128</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>EIC clock divided by 256</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STATES0</name>
<description>Debouncer number of states</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>STATES0Select</name>
<enumeratedValue>
<name>LFREQ3</name>
<description>3 low frequency samples</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LFREQ7</name>
<description>7 low frequency samples</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRESCALER1</name>
<description>Debouncer Prescaler</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PRESCALER1Select</name>
<enumeratedValue>
<name>DIV2</name>
<description>EIC clock divided by 2</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>EIC clock divided by 4</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>EIC clock divided by 8</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>EIC clock divided by 16</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>EIC clock divided by 32</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>EIC clock divided by 64</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>EIC clock divided by 128</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>EIC clock divided by 256</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STATES1</name>
<description>Debouncer number of states</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>STATES1Select</name>
<enumeratedValue>
<name>LFREQ3</name>
<description>3 low frequency samples</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>LFREQ7</name>
<description>7 low frequency samples</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TICKON</name>
<description>Pin Sampler frequency selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>TICKONSelect</name>
<enumeratedValue>
<name>CLK_GCLK_EIC</name>
<description>Clocked by GCLK</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK_LFREQ</name>
<description>Clocked by Low Frequency Clock</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>PINSTATE</name>
<description>Pin State</description>
<addressOffset>0x38</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PINSTATE</name>
<description>Pin State</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>EVSYS</name>
<version>U25041.0.0</version>
<description>Event System Interface</description>
<groupName>EVSYS</groupName>
<prependToName>EVSYS_</prependToName>
<baseAddress>0x4100E000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x2BC</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>EVSYS_0</name>
<value>36</value>
</interrupt>
<interrupt>
<name>EVSYS_1</name>
<value>37</value>
</interrupt>
<interrupt>
<name>EVSYS_2</name>
<value>38</value>
</interrupt>
<interrupt>
<name>EVSYS_3</name>
<value>39</value>
</interrupt>
<interrupt>
<name>EVSYS_OTHER</name>
<value>40</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SWEVT</name>
<description>Software Event</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANNEL0</name>
<description>Channel 0 Software Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL1</name>
<description>Channel 1 Software Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL2</name>
<description>Channel 2 Software Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL3</name>
<description>Channel 3 Software Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL4</name>
<description>Channel 4 Software Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL5</name>
<description>Channel 5 Software Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL6</name>
<description>Channel 6 Software Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL7</name>
<description>Channel 7 Software Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL8</name>
<description>Channel 8 Software Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL9</name>
<description>Channel 9 Software Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL10</name>
<description>Channel 10 Software Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL11</name>
<description>Channel 11 Software Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL12</name>
<description>Channel 12 Software Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL13</name>
<description>Channel 13 Software Selection</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL14</name>
<description>Channel 14 Software Selection</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL15</name>
<description>Channel 15 Software Selection</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL16</name>
<description>Channel 16 Software Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL17</name>
<description>Channel 17 Software Selection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL18</name>
<description>Channel 18 Software Selection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL19</name>
<description>Channel 19 Software Selection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL20</name>
<description>Channel 20 Software Selection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL21</name>
<description>Channel 21 Software Selection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL22</name>
<description>Channel 22 Software Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL23</name>
<description>Channel 23 Software Selection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL24</name>
<description>Channel 24 Software Selection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL25</name>
<description>Channel 25 Software Selection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL26</name>
<description>Channel 26 Software Selection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL27</name>
<description>Channel 27 Software Selection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL28</name>
<description>Channel 28 Software Selection</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL29</name>
<description>Channel 29 Software Selection</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL30</name>
<description>Channel 30 Software Selection</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL31</name>
<description>Channel 31 Software Selection</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PRICTRL</name>
<description>Priority Control</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>PRI</name>
<description>Channel Priority Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RREN</name>
<description>Round-Robin Scheduling Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTPEND</name>
<description>Channel Pending Interrupt</description>
<addressOffset>0x10</addressOffset>
<size>16</size>
<resetValue>0x4000</resetValue>
<fields>
<field>
<name>ID</name>
<description>Channel ID</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>OVR</name>
<description>Channel Overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD</name>
<description>Channel Event Detected</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READY</name>
<description>Ready</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSY</name>
<description>Busy</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTSTATUS</name>
<description>Interrupt Status</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHINT0</name>
<description>Channel 0 Pending Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT1</name>
<description>Channel 1 Pending Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT2</name>
<description>Channel 2 Pending Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT3</name>
<description>Channel 3 Pending Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT4</name>
<description>Channel 4 Pending Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT5</name>
<description>Channel 5 Pending Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT6</name>
<description>Channel 6 Pending Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT7</name>
<description>Channel 7 Pending Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT8</name>
<description>Channel 8 Pending Interrupt</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT9</name>
<description>Channel 9 Pending Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT10</name>
<description>Channel 10 Pending Interrupt</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHINT11</name>
<description>Channel 11 Pending Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BUSYCH</name>
<description>Busy Channels</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BUSYCH0</name>
<description>Busy Channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH1</name>
<description>Busy Channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH2</name>
<description>Busy Channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH3</name>
<description>Busy Channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH4</name>
<description>Busy Channel 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH5</name>
<description>Busy Channel 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH6</name>
<description>Busy Channel 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH7</name>
<description>Busy Channel 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH8</name>
<description>Busy Channel 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH9</name>
<description>Busy Channel 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH10</name>
<description>Busy Channel 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH11</name>
<description>Busy Channel 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>READYUSR</name>
<description>Ready Users</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>READYUSR0</name>
<description>Ready User for Channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READYUSR1</name>
<description>Ready User for Channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READYUSR2</name>
<description>Ready User for Channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READYUSR3</name>
<description>Ready User for Channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READYUSR4</name>
<description>Ready User for Channel 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READYUSR5</name>
<description>Ready User for Channel 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READYUSR6</name>
<description>Ready User for Channel 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READYUSR7</name>
<description>Ready User for Channel 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READYUSR8</name>
<description>Ready User for Channel 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READYUSR9</name>
<description>Ready User for Channel 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READYUSR10</name>
<description>Ready User for Channel 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READYUSR11</name>
<description>Ready User for Channel 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<cluster>
<dim>32</dim>
<dimIncrement>0x8</dimIncrement>
<name>CHANNEL[%s]</name>
<description/>
<addressOffset>0x020</addressOffset>
<register>
<name>CHANNEL</name>
<description>Channel n Control</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00008000</resetValue>
<fields>
<field>
<name>EVGEN</name>
<description>Event Generator Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PATH</name>
<description>Path Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PATHSelect</name>
<enumeratedValue>
<name>SYNCHRONOUS</name>
<description>Synchronous path</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RESYNCHRONIZED</name>
<description>Resynchronized path</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>ASYNCHRONOUS</name>
<description>Asynchronous path</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EDGSEL</name>
<description>Edge Detection Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>EDGSELSelect</name>
<enumeratedValue>
<name>NO_EVT_OUTPUT</name>
<description>No event output when using the resynchronized or synchronous path</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING_EDGE</name>
<description>Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING_EDGE</name>
<description>Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH_EDGES</name>
<description>Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in standby</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>Generic Clock On Demand</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHINTENCLR</name>
<description>Channel n Interrupt Enable Clear</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVR</name>
<description>Channel Overrun Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD</name>
<description>Channel Event Detected Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHINTENSET</name>
<description>Channel n Interrupt Enable Set</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVR</name>
<description>Channel Overrun Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD</name>
<description>Channel Event Detected Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHINTFLAG</name>
<description>Channel n Interrupt Flag Status and Clear</description>
<addressOffset>0x6</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVR</name>
<description>Channel Overrun</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD</name>
<description>Channel Event Detected</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHSTATUS</name>
<description>Channel n Status</description>
<addressOffset>0x7</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>RDYUSR</name>
<description>Ready User</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSYCH</name>
<description>Busy Channel</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster>
<register>
<dim>67</dim>
<dimIncrement>4</dimIncrement>
<name>USER[%s]</name>
<description>User Multiplexer n</description>
<addressOffset>0x120</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHANNEL</name>
<description>Channel Event Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>FREQM</name>
<version>U22571.1.0</version>
<description>Frequency Meter</description>
<groupName>FREQM</groupName>
<prependToName>FREQM_</prependToName>
<baseAddress>0x40002C00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x14</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>FREQM</name>
<value>28</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A Register</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>Control B Register</description>
<addressOffset>0x1</addressOffset>
<size>8</size>
<access>write-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>START</name>
<description>Start Measurement</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFGA</name>
<description>Config A register</description>
<addressOffset>0x2</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>REFNUM</name>
<description>Number of Reference Clock Cycles</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear Register</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DONE</name>
<description>Measurement Done Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set Register</description>
<addressOffset>0x9</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DONE</name>
<description>Measurement Done Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Register</description>
<addressOffset>0xA</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DONE</name>
<description>Measurement Done</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status Register</description>
<addressOffset>0xB</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>BUSY</name>
<description>FREQM Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Sticky Count Value Overflow</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy Register</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>VALUE</name>
<description>Count Value Register</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>VALUE</name>
<description>Measurement Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>GCLK</name>
<version>U21221.2.0</version>
<description>Generic Clock Generator</description>
<groupName>GCLK</groupName>
<prependToName>GCLK_</prependToName>
<baseAddress>0x40001C00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x1A0</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CTRLA</name>
<description>Control</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchroniation Busy bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GENCTRL</name>
<description>Generic Clock Generator Control n Synchronization Busy bits</description>
<bitOffset>2</bitOffset>
<bitWidth>12</bitWidth>
<enumeratedValues>
<name>GENCTRLSelect</name>
<enumeratedValue>
<name>GCLK0</name>
<description>Generic clock generator 0</description>
<value>0x0001</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK1</name>
<description>Generic clock generator 1</description>
<value>0x0002</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK2</name>
<description>Generic clock generator 2</description>
<value>0x0004</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK3</name>
<description>Generic clock generator 3</description>
<value>0x0008</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK4</name>
<description>Generic clock generator 4</description>
<value>0x0010</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK5</name>
<description>Generic clock generator 5</description>
<value>0x0020</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK6</name>
<description>Generic clock generator 6</description>
<value>0x0040</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK7</name>
<description>Generic clock generator 7</description>
<value>0x0080</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK8</name>
<description>Generic clock generator 8</description>
<value>0x0100</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK9</name>
<description>Generic clock generator 9</description>
<value>0x0200</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK10</name>
<description>Generic clock generator 10</description>
<value>0x0400</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK11</name>
<description>Generic clock generator 11</description>
<value>0x0800</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>12</dim>
<dimIncrement>4</dimIncrement>
<name>GENCTRL[%s]</name>
<description>Generic Clock Generator Control</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SRC</name>
<description>Source Select</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>SRCSelect</name>
<enumeratedValue>
<name>XOSC0</name>
<description>XOSC0 oscillator output</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>XOSC1</name>
<description>XOSC1 oscillator output</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLKIN</name>
<description>Generator input pad</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLKGEN1</name>
<description>Generic clock generator 1 output</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>OSCULP32K</name>
<description>OSCULP32K oscillator output</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>XOSC32K</name>
<description>XOSC32K oscillator output</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DFLL</name>
<description>DFLL output</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>DPLL0</name>
<description>DPLL0 output</description>
<value>7</value>
</enumeratedValue>
<enumeratedValue>
<name>DPLL1</name>
<description>DPLL1 output</description>
<value>8</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GENEN</name>
<description>Generic Clock Generator Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDC</name>
<description>Improve Duty Cycle</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OOV</name>
<description>Output Off Value</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OE</name>
<description>Output Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIVSEL</name>
<description>Divide Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DIVSELSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>Divide input directly by divider factor</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Divide input by 2^(divider factor+ 1)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIV</name>
<description>Division Factor</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>48</dim>
<dimIncrement>4</dimIncrement>
<name>PCHCTRL[%s]</name>
<description>Peripheral Clock Control</description>
<addressOffset>0x80</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GEN</name>
<description>Generic Clock Generator</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>GENSelect</name>
<enumeratedValue>
<name>GCLK0</name>
<description>Generic clock generator 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK1</name>
<description>Generic clock generator 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK2</name>
<description>Generic clock generator 2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK3</name>
<description>Generic clock generator 3</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK4</name>
<description>Generic clock generator 4</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK5</name>
<description>Generic clock generator 5</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK6</name>
<description>Generic clock generator 6</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK7</name>
<description>Generic clock generator 7</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK8</name>
<description>Generic clock generator 8</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK9</name>
<description>Generic clock generator 9</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK10</name>
<description>Generic clock generator 10</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK11</name>
<description>Generic clock generator 11</description>
<value>0xB</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHEN</name>
<description>Channel Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRTLOCK</name>
<description>Write Lock</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>HMATRIX</name>
<version>I76382.1.4</version>
<description>HSB Matrix</description>
<groupName>HMATRIXB</groupName>
<prependToName>HMATRIXB_</prependToName>
<baseAddress>0x4100C000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0xB0</size>
<usage>registers</usage>
</addressBlock>
<registers>
<cluster>
<dim>16</dim>
<dimIncrement>0x8</dimIncrement>
<name>PRS[%s]</name>
<description/>
<addressOffset>0x080</addressOffset>
<register>
<name>PRAS</name>
<description>Priority A for Slave</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>PRBS</name>
<description>Priority B for Slave</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
</register>
</cluster>
</registers>
</peripheral>
<peripheral>
<name>ICM</name>
<version>U20101.2.0</version>
<description>Integrity Check Monitor</description>
<groupName>ICM</groupName>
<prependToName>ICM_</prependToName>
<baseAddress>0x42002C00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x58</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>ICM</name>
<value>132</value>
</interrupt>
<registers>
<register>
<name>CFG</name>
<description>Configuration</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WBDIS</name>
<description>Write Back Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOMDIS</name>
<description>End of Monitoring Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLBDIS</name>
<description>Secondary List Branching Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBC</name>
<description>Bus Burden Control</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ASCD</name>
<description>Automatic Switch To Compare Digest</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DUALBUFF</name>
<description>Dual Input Buffer</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UIHASH</name>
<description>User Initial Hash Value</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UALGO</name>
<description>User SHA Algorithm</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>UALGOSelect</name>
<enumeratedValue>
<name>SHA1</name>
<description>SHA1 Algorithm</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SHA256</name>
<description>SHA256 Algorithm</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SHA224</name>
<description>SHA224 Algorithm</description>
<value>0x4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HAPROT</name>
<description>Region Hash Area Protection</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>DAPROT</name>
<description>Region Descriptor Area Protection</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRL</name>
<description>Control</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>ENABLE</name>
<description>ICM Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DISABLE</name>
<description>ICM Disable Register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REHASH</name>
<description>Recompute Internal Hash</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RMDIS</name>
<description>Region Monitoring Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RMEN</name>
<description>Region Monitoring Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>SR</name>
<description>Status</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>ICM Controller Enable Register</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAWRMDIS</name>
<description>RAW Region Monitoring Disabled Status</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RMDIS</name>
<description>Region Monitoring Disabled Status</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>RHC</name>
<description>Region Hash Completed Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RDM</name>
<description>Region Digest Mismatch Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RBE</name>
<description>Region Bus Error Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RWC</name>
<description>Region Wrap Condition detected Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>REC</name>
<description>Region End bit Condition Detected Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RSU</name>
<description>Region Status Updated Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>URAD</name>
<description>Undefined Register Access Detection Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RHC</name>
<description>Region Hash Completed Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RDM</name>
<description>Region Digest Mismatch Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RBE</name>
<description>Region Bus Error Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RWC</name>
<description>Region Wrap Condition Detected Interrupt Disable</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>REC</name>
<description>Region End bit Condition detected Interrupt Disable</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RSU</name>
<description>Region Status Updated Interrupt Disable</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>URAD</name>
<description>Undefined Register Access Detection Interrupt Disable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RHC</name>
<description>Region Hash Completed Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RDM</name>
<description>Region Digest Mismatch Interrupt Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RBE</name>
<description>Region Bus Error Interrupt Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RWC</name>
<description>Region Wrap Condition Detected Interrupt Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>REC</name>
<description>Region End bit Condition Detected Interrupt Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RSU</name>
<description>Region Status Updated Interrupt Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>URAD</name>
<description>Undefined Register Access Detection Interrupt Mask</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RHC</name>
<description>Region Hash Completed</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RDM</name>
<description>Region Digest Mismatch</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RBE</name>
<description>Region Bus Error</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RWC</name>
<description>Region Wrap Condition Detected</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>REC</name>
<description>Region End bit Condition Detected</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RSU</name>
<description>Region Status Updated Detected</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>URAD</name>
<description>Undefined Register Access Detection Status</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>UASR</name>
<description>Undefined Access Status</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>URAT</name>
<description>Undefined Register Access Trace</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>URATSelect</name>
<enumeratedValue>
<name>UNSPEC_STRUCT_MEMBER</name>
<description>Unspecified structure member set to one detected when the descriptor is loaded</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CFG_MODIFIED</name>
<description>CFG modified during active monitoring</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DSCR_MODIFIED</name>
<description>DSCR modified during active monitoring</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>HASH_MODIFIED</name>
<description>HASH modified during active monitoring</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>READ_ACCESS</name>
<description>Write-only register read access</description>
<value>0x4</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>DSCR</name>
<description>Region Descriptor Area Start Address</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DASA</name>
<description>Descriptor Area Start Address</description>
<bitOffset>6</bitOffset>
<bitWidth>26</bitWidth>
</field>
</fields>
</register>
<register>
<name>HASH</name>
<description>Region Hash Area Start Address</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>HASA</name>
<description>Hash Area Start Address</description>
<bitOffset>7</bitOffset>
<bitWidth>25</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>4</dimIncrement>
<name>UIHVAL[%s]</name>
<description>User Initial Hash Value n</description>
<addressOffset>0x38</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>VAL</name>
<description>Initial Hash Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>I2S</name>
<version>U22242.0.0</version>
<description>Inter-IC Sound Interface</description>
<groupName>I2S</groupName>
<prependToName>I2S_</prependToName>
<baseAddress>0x43002800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x38</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>I2S</name>
<value>128</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKEN0</name>
<description>Clock Unit 0 Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKEN1</name>
<description>Clock Unit 1 Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXEN</name>
<description>Tx Serializer Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXEN</name>
<description>Rx Serializer Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<name>CLKCTRL[%s]</name>
<description>Clock Unit n Control</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SLOTSIZE</name>
<description>Slot Size</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SLOTSIZESelect</name>
<enumeratedValue>
<name>8</name>
<description>8-bit Slot for Clock Unit n</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16-bit Slot for Clock Unit n</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>24</name>
<description>24-bit Slot for Clock Unit n</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>32</name>
<description>32-bit Slot for Clock Unit n</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NBSLOTS</name>
<description>Number of Slots in Frame</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>FSWIDTH</name>
<description>Frame Sync Width</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>FSWIDTHSelect</name>
<enumeratedValue>
<name>SLOT</name>
<description>Frame Sync Pulse is 1 Slot wide (default for I2S protocol)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF</name>
<description>Frame Sync Pulse is half a Frame wide</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BIT</name>
<description>Frame Sync Pulse is 1 Bit wide</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BURST</name>
<description>Clock Unit n operates in Burst mode, with a 1-bit wide Frame Sync pulse per Data sample, only when Data transfer is requested</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BITDELAY</name>
<description>Data Delay from Frame Sync</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BITDELAYSelect</name>
<enumeratedValue>
<name>LJ</name>
<description>Left Justified (0 Bit Delay)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>I2S</name>
<description>I2S (1 Bit Delay)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSSEL</name>
<description>Frame Sync Select</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>FSSELSelect</name>
<enumeratedValue>
<name>SCKDIV</name>
<description>Divided Serial Clock n is used as Frame Sync n source</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FSPIN</name>
<description>FSn input pin is used as Frame Sync n source</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FSINV</name>
<description>Frame Sync Invert</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FSOUTINV</name>
<description>Frame Sync Output Invert</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SCKSEL</name>
<description>Serial Clock Select</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SCKSELSelect</name>
<enumeratedValue>
<name>MCKDIV</name>
<description>Divided Master Clock n is used as Serial Clock n source</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SCKPIN</name>
<description>SCKn input pin is used as Serial Clock n source</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SCKOUTINV</name>
<description>Serial Clock Output Invert</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCKSEL</name>
<description>Master Clock Select</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>MCKSELSelect</name>
<enumeratedValue>
<name>GCLK</name>
<description>GCLK_I2S_n is used as Master Clock n source</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MCKPIN</name>
<description>MCKn input pin is used as Master Clock n source</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MCKEN</name>
<description>Master Clock Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCKOUTINV</name>
<description>Master Clock Output Invert</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCKDIV</name>
<description>Master Clock Division Factor</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>MCKOUTDIV</name>
<description>Master Clock Output Division Factor</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>RXRDY0</name>
<description>Receive Ready 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXRDY1</name>
<description>Receive Ready 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOR0</name>
<description>Receive Overrun 0 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOR1</name>
<description>Receive Overrun 1 Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXRDY0</name>
<description>Transmit Ready 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXRDY1</name>
<description>Transmit Ready 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUR0</name>
<description>Transmit Underrun 0 Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUR1</name>
<description>Transmit Underrun 1 Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x10</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>RXRDY0</name>
<description>Receive Ready 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXRDY1</name>
<description>Receive Ready 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOR0</name>
<description>Receive Overrun 0 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOR1</name>
<description>Receive Overrun 1 Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXRDY0</name>
<description>Transmit Ready 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXRDY1</name>
<description>Transmit Ready 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUR0</name>
<description>Transmit Underrun 0 Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUR1</name>
<description>Transmit Underrun 1 Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x14</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>RXRDY0</name>
<description>Receive Ready 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXRDY1</name>
<description>Receive Ready 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOR0</name>
<description>Receive Overrun 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXOR1</name>
<description>Receive Overrun 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXRDY0</name>
<description>Transmit Ready 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXRDY1</name>
<description>Transmit Ready 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUR0</name>
<description>Transmit Underrun 0</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXUR1</name>
<description>Transmit Underrun 1</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Status</description>
<addressOffset>0x18</addressOffset>
<size>16</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable Synchronization Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKEN0</name>
<description>Clock Unit 0 Enable Synchronization Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKEN1</name>
<description>Clock Unit 1 Enable Synchronization Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXEN</name>
<description>Tx Serializer Enable Synchronization Status</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXEN</name>
<description>Rx Serializer Enable Synchronization Status</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXDATA</name>
<description>Tx Data Synchronization Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXDATA</name>
<description>Rx Data Synchronization Status</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TXCTRL</name>
<description>Tx Serializer Control</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SERMODE</name>
<description>Serializer Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SERMODESelect</name>
<enumeratedValue>
<name>RX</name>
<description>Receive</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TX</name>
<description>Transmit</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PDM2</name>
<description>Receive one PDM data on each serial clock edge</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TXDEFAULT</name>
<description>Line Default Line when Slot Disabled</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>TXDEFAULTSelect</name>
<enumeratedValue>
<name>ZERO</name>
<description>Output Default Value is 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE</name>
<description>Output Default Value is 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>HIZ</name>
<description>Output Default Value is high impedance</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TXSAME</name>
<description>Transmit Data when Underrun</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>TXSAMESelect</name>
<enumeratedValue>
<name>ZERO</name>
<description>Zero data transmitted in case of underrun</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SAME</name>
<description>Last data transmitted in case of underrun</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKSEL</name>
<description>Clock Unit Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CLKSELSelect</name>
<enumeratedValue>
<name>CLK0</name>
<description>Use Clock Unit 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK1</name>
<description>Use Clock Unit 1</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SLOTADJ</name>
<description>Data Slot Formatting Adjust</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SLOTADJSelect</name>
<enumeratedValue>
<name>RIGHT</name>
<description>Data is right adjusted in slot</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LEFT</name>
<description>Data is left adjusted in slot</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATASIZE</name>
<description>Data Word Size</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>DATASIZESelect</name>
<enumeratedValue>
<name>32</name>
<description>32 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>24</name>
<description>24 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>20</name>
<description>20 bits</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>18</name>
<description>18 bits</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 bits</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>16C</name>
<description>16 bits compact stereo</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>8</name>
<description>8 bits</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>8C</name>
<description>8 bits compact stereo</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WORDADJ</name>
<description>Data Word Formatting Adjust</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>WORDADJSelect</name>
<enumeratedValue>
<name>RIGHT</name>
<description>Data is right adjusted in word</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LEFT</name>
<description>Data is left adjusted in word</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EXTEND</name>
<description>Data Formatting Bit Extension</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>EXTENDSelect</name>
<enumeratedValue>
<name>ZERO</name>
<description>Extend with zeroes</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE</name>
<description>Extend with ones</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MSBIT</name>
<description>Extend with Most Significant Bit</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>LSBIT</name>
<description>Extend with Least Significant Bit</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BITREV</name>
<description>Data Formatting Bit Reverse</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BITREVSelect</name>
<enumeratedValue>
<name>MSBIT</name>
<description>Transfer Data Most Significant Bit (MSB) first (default for I2S protocol)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LSBIT</name>
<description>Transfer Data Least Significant Bit (LSB) first</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SLOTDIS0</name>
<description>Slot 0 Disabled for this Serializer</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS1</name>
<description>Slot 1 Disabled for this Serializer</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS2</name>
<description>Slot 2 Disabled for this Serializer</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS3</name>
<description>Slot 3 Disabled for this Serializer</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS4</name>
<description>Slot 4 Disabled for this Serializer</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS5</name>
<description>Slot 5 Disabled for this Serializer</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS6</name>
<description>Slot 6 Disabled for this Serializer</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS7</name>
<description>Slot 7 Disabled for this Serializer</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MONO</name>
<description>Mono Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>MONOSelect</name>
<enumeratedValue>
<name>STEREO</name>
<description>Normal mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MONO</name>
<description>Left channel data is duplicated to right channel</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DMA</name>
<description>Single or Multiple DMA Channels</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DMASelect</name>
<enumeratedValue>
<name>SINGLE</name>
<description>Single DMA channel</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MULTIPLE</name>
<description>One DMA channel per data channel</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>RXCTRL</name>
<description>Rx Serializer Control</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SERMODE</name>
<description>Serializer Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SERMODESelect</name>
<enumeratedValue>
<name>RX</name>
<description>Receive</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PDM2</name>
<description>Receive one PDM data on each serial clock edge</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKSEL</name>
<description>Clock Unit Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CLKSELSelect</name>
<enumeratedValue>
<name>CLK0</name>
<description>Use Clock Unit 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CLK1</name>
<description>Use Clock Unit 1</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SLOTADJ</name>
<description>Data Slot Formatting Adjust</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SLOTADJSelect</name>
<enumeratedValue>
<name>RIGHT</name>
<description>Data is right adjusted in slot</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LEFT</name>
<description>Data is left adjusted in slot</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATASIZE</name>
<description>Data Word Size</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>DATASIZESelect</name>
<enumeratedValue>
<name>32</name>
<description>32 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>24</name>
<description>24 bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>20</name>
<description>20 bits</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>18</name>
<description>18 bits</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 bits</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>16C</name>
<description>16 bits compact stereo</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>8</name>
<description>8 bits</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>8C</name>
<description>8 bits compact stereo</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WORDADJ</name>
<description>Data Word Formatting Adjust</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>WORDADJSelect</name>
<enumeratedValue>
<name>RIGHT</name>
<description>Data is right adjusted in word</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LEFT</name>
<description>Data is left adjusted in word</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EXTEND</name>
<description>Data Formatting Bit Extension</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>EXTENDSelect</name>
<enumeratedValue>
<name>ZERO</name>
<description>Extend with zeroes</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ONE</name>
<description>Extend with ones</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MSBIT</name>
<description>Extend with Most Significant Bit</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>LSBIT</name>
<description>Extend with Least Significant Bit</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BITREV</name>
<description>Data Formatting Bit Reverse</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BITREVSelect</name>
<enumeratedValue>
<name>MSBIT</name>
<description>Transfer Data Most Significant Bit (MSB) first (default for I2S protocol)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LSBIT</name>
<description>Transfer Data Least Significant Bit (LSB) first</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SLOTDIS0</name>
<description>Slot 0 Disabled for this Serializer</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS1</name>
<description>Slot 1 Disabled for this Serializer</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS2</name>
<description>Slot 2 Disabled for this Serializer</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS3</name>
<description>Slot 3 Disabled for this Serializer</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS4</name>
<description>Slot 4 Disabled for this Serializer</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS5</name>
<description>Slot 5 Disabled for this Serializer</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS6</name>
<description>Slot 6 Disabled for this Serializer</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLOTDIS7</name>
<description>Slot 7 Disabled for this Serializer</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MONO</name>
<description>Mono Mode</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>MONOSelect</name>
<enumeratedValue>
<name>STEREO</name>
<description>Normal mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MONO</name>
<description>Left channel data is duplicated to right channel</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DMA</name>
<description>Single or Multiple DMA Channels</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DMASelect</name>
<enumeratedValue>
<name>SINGLE</name>
<description>Single DMA channel</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MULTIPLE</name>
<description>One DMA channel per data channel</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RXLOOP</name>
<description>Loop-back Test Mode</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TXDATA</name>
<description>Tx Data</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Sample Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>RXDATA</name>
<description>Rx Data</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Sample Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>MCLK</name>
<version>U24081.0.0</version>
<description>Main Clock</description>
<groupName>MCLK</groupName>
<prependToName>MCLK_</prependToName>
<baseAddress>0x40000800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x24</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>MCLK</name>
<value>1</value>
</interrupt>
<registers>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x1</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>CKRDY</name>
<description>Clock Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x2</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>CKRDY</name>
<description>Clock Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x3</addressOffset>
<size>8</size>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>CKRDY</name>
<description>Clock Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSDIV</name>
<description>HS Clock Division</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>DIV</name>
<description>CPU Clock Division Factor</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>DIVSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>Divide by 1</description>
<value>0x01</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CPUDIV</name>
<description>CPU Clock Division</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>DIV</name>
<description>Low-Power Clock Division Factor</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>DIVSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>Divide by 1</description>
<value>0x01</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Divide by 2</description>
<value>0x02</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Divide by 4</description>
<value>0x04</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Divide by 8</description>
<value>0x08</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Divide by 16</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>Divide by 32</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Divide by 64</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>Divide by 128</description>
<value>0x80</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>AHBMASK</name>
<description>AHB Mask</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<resetValue>0x00FFFFFF</resetValue>
<fields>
<field>
<name>HPB0_</name>
<description>HPB0 AHB Clock Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB1_</name>
<description>HPB1 AHB Clock Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB2_</name>
<description>HPB2 AHB Clock Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB3_</name>
<description>HPB3 AHB Clock Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DSU_</name>
<description>DSU AHB Clock Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HMATRIX_</name>
<description>HMATRIX AHB Clock Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVMCTRL_</name>
<description>NVMCTRL AHB Clock Mask</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSRAM_</name>
<description>HSRAM AHB Clock Mask</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMCC_</name>
<description>CMCC AHB Clock Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAC_</name>
<description>DMAC AHB Clock Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB_</name>
<description>USB AHB Clock Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKUPRAM_</name>
<description>BKUPRAM AHB Clock Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAC_</name>
<description>PAC AHB Clock Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QSPI_</name>
<description>QSPI AHB Clock Mask</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDHC0_</name>
<description>SDHC0 AHB Clock Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ICM_</name>
<description>ICM AHB Clock Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PUKCC_</name>
<description>PUKCC AHB Clock Mask</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QSPI_2X_</name>
<description>QSPI_2X AHB Clock Mask</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVMCTRL_SMEEPROM_</name>
<description>NVMCTRL_SMEEPROM AHB Clock Mask</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVMCTRL_CACHE_</name>
<description>NVMCTRL_CACHE AHB Clock Mask</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APBAMASK</name>
<description>APBA Mask</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<resetValue>0x000007FF</resetValue>
<fields>
<field>
<name>PAC_</name>
<description>PAC APB Clock Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PM_</name>
<description>PM APB Clock Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCLK_</name>
<description>MCLK APB Clock Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTC_</name>
<description>RSTC APB Clock Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSCCTRL_</name>
<description>OSCCTRL APB Clock Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSC32KCTRL_</name>
<description>OSC32KCTRL APB Clock Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUPC_</name>
<description>SUPC APB Clock Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GCLK_</name>
<description>GCLK APB Clock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDT_</name>
<description>WDT APB Clock Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTC_</name>
<description>RTC APB Clock Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EIC_</name>
<description>EIC APB Clock Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FREQM_</name>
<description>FREQM APB Clock Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM0_</name>
<description>SERCOM0 APB Clock Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM1_</name>
<description>SERCOM1 APB Clock Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC0_</name>
<description>TC0 APB Clock Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1_</name>
<description>TC1 APB Clock Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APBBMASK</name>
<description>APBB Mask</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<resetValue>0x00018056</resetValue>
<fields>
<field>
<name>USB_</name>
<description>USB APB Clock Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DSU_</name>
<description>DSU APB Clock Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVMCTRL_</name>
<description>NVMCTRL APB Clock Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PORT_</name>
<description>PORT APB Clock Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HMATRIX_</name>
<description>HMATRIX APB Clock Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVSYS_</name>
<description>EVSYS APB Clock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM2_</name>
<description>SERCOM2 APB Clock Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM3_</name>
<description>SERCOM3 APB Clock Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC0_</name>
<description>TCC0 APB Clock Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC1_</name>
<description>TCC1 APB Clock Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC2_</name>
<description>TC2 APB Clock Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC3_</name>
<description>TC3 APB Clock Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMECC_</name>
<description>RAMECC APB Clock Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APBCMASK</name>
<description>APBC Mask</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<resetValue>0x00002000</resetValue>
<fields>
<field>
<name>TCC2_</name>
<description>TCC2 APB Clock Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC3_</name>
<description>TCC3 APB Clock Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC4_</name>
<description>TC4 APB Clock Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC5_</name>
<description>TC5 APB Clock Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PDEC_</name>
<description>PDEC APB Clock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AC_</name>
<description>AC APB Clock Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AES_</name>
<description>AES APB Clock Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRNG_</name>
<description>TRNG APB Clock Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ICM_</name>
<description>ICM APB Clock Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QSPI_</name>
<description>QSPI APB Clock Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCL_</name>
<description>CCL APB Clock Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APBDMASK</name>
<description>APBD Mask</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SERCOM4_</name>
<description>SERCOM4 APB Clock Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM5_</name>
<description>SERCOM5 APB Clock Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC4_</name>
<description>TCC4 APB Clock Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC0_</name>
<description>ADC0 APB Clock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC1_</name>
<description>ADC1 APB Clock Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAC_</name>
<description>DAC APB Clock Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2S_</name>
<description>I2S APB Clock Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PCC_</name>
<description>PCC APB Clock Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>NVMCTRL</name>
<version>U24091.0.0</version>
<description>Non-Volatile Memory Controller</description>
<groupName>NVMCTRL</groupName>
<prependToName>NVMCTRL_</prependToName>
<baseAddress>0x41004000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x30</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>NVMCTRL_0</name>
<value>29</value>
</interrupt>
<interrupt>
<name>NVMCTRL_1</name>
<value>30</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>16</size>
<resetValue>0x0004</resetValue>
<fields>
<field>
<name>AUTOWS</name>
<description>Auto Wait State Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSPEN</name>
<description>Suspend Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WMODE</name>
<description>Write Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>WMODESelect</name>
<enumeratedValue>
<name>MAN</name>
<description>Manual Write</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ADW</name>
<description>Automatic Double Word Write</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>AQW</name>
<description>Automatic Quad Word</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>AP</name>
<description>Automatic Page Write</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRM</name>
<description>Power Reduction Mode during Sleep</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PRMSelect</name>
<enumeratedValue>
<name>SEMIAUTO</name>
<description>NVM block enters low-power mode when entering standby mode. NVM block enters low-power mode when SPRM command is issued. NVM block exits low-power mode upon first access.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>FULLAUTO</name>
<description>NVM block enters low-power mode when entering standby mode. NVM block enters low-power mode when SPRM command is issued. NVM block exits low-power mode when system is not in standby mode.</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>MANUAL</name>
<description>NVM block does not enter low-power mode when entering standby mode. NVM block enters low-power mode when SPRM command is issued. NVM block exits low-power mode upon first access.</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RWS</name>
<description>NVM Read Wait States</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>AHBNS0</name>
<description>Force AHB0 access to NONSEQ, burst transfers are continuously rearbitrated</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHBNS1</name>
<description>Force AHB1 access to NONSEQ, burst transfers are continuously rearbitrated</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CACHEDIS0</name>
<description>AHB0 Cache Disable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CACHEDIS1</name>
<description>AHB1 Cache Disable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>Control B</description>
<addressOffset>0x4</addressOffset>
<size>16</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>EP</name>
<description>Erase Page - Only supported in the USER and AUX pages.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>EB</name>
<description>Erase Block - Erases the block addressed by the ADDR register, not supported in the user page</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WP</name>
<description>Write Page - Writes the contents of the page buffer to the page addressed by the ADDR register, not supported in the user page</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>WQW</name>
<description>Write Quad Word - Writes a 128-bit word at the location addressed by the ADDR register.</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>SWRST</name>
<description>Software Reset - Power-Cycle the NVM memory and replay the device automatic calibration procedure and resets the module configuration registers</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>LR</name>
<description>Lock Region - Locks the region containing the address location in the ADDR register.</description>
<value>0x11</value>
</enumeratedValue>
<enumeratedValue>
<name>UR</name>
<description>Unlock Region - Unlocks the region containing the address location in the ADDR register.</description>
<value>0x12</value>
</enumeratedValue>
<enumeratedValue>
<name>SPRM</name>
<description>Sets the power reduction mode.</description>
<value>0x13</value>
</enumeratedValue>
<enumeratedValue>
<name>CPRM</name>
<description>Clears the power reduction mode.</description>
<value>0x14</value>
</enumeratedValue>
<enumeratedValue>
<name>PBC</name>
<description>Page Buffer Clear - Clears the page buffer.</description>
<value>0x15</value>
</enumeratedValue>
<enumeratedValue>
<name>SSB</name>
<description>Set Security Bit</description>
<value>0x16</value>
</enumeratedValue>
<enumeratedValue>
<name>BKSWRST</name>
<description>Bank swap and system reset, if SMEE is used also reallocate SMEE data into the opposite BANK</description>
<value>0x17</value>
</enumeratedValue>
<enumeratedValue>
<name>CELCK</name>
<description>Chip Erase Lock - DSU.CE command is not available</description>
<value>0x18</value>
</enumeratedValue>
<enumeratedValue>
<name>CEULCK</name>
<description>Chip Erase Unlock - DSU.CE command is available</description>
<value>0x19</value>
</enumeratedValue>
<enumeratedValue>
<name>SBPDIS</name>
<description>Sets STATUS.BPDIS, Boot loader protection is discarded until CBPDIS is issued or next start-up sequence</description>
<value>0x1A</value>
</enumeratedValue>
<enumeratedValue>
<name>CBPDIS</name>
<description>Clears STATUS.BPDIS, Boot loader protection is not discarded</description>
<value>0x1B</value>
</enumeratedValue>
<enumeratedValue>
<name>ASEES0</name>
<description>Activate SmartEEPROM Sector 0, deactivate Sector 1</description>
<value>0x30</value>
</enumeratedValue>
<enumeratedValue>
<name>ASEES1</name>
<description>Activate SmartEEPROM Sector 1, deactivate Sector 0</description>
<value>0x31</value>
</enumeratedValue>
<enumeratedValue>
<name>SEERALOC</name>
<description>Starts SmartEEPROM sector reallocation algorithm</description>
<value>0x32</value>
</enumeratedValue>
<enumeratedValue>
<name>SEEFLUSH</name>
<description>Flush SMEE data when in buffered mode</description>
<value>0x33</value>
</enumeratedValue>
<enumeratedValue>
<name>LSEE</name>
<description>Lock access to SmartEEPROM data from any mean</description>
<value>0x34</value>
</enumeratedValue>
<enumeratedValue>
<name>USEE</name>
<description>Unlock access to SmartEEPROM data</description>
<value>0x35</value>
</enumeratedValue>
<enumeratedValue>
<name>LSEER</name>
<description>Lock access to the SmartEEPROM Register Address Space (above 64KB)</description>
<value>0x36</value>
</enumeratedValue>
<enumeratedValue>
<name>USEER</name>
<description>Unlock access to the SmartEEPROM Register Address Space (above 64KB)</description>
<value>0x37</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDEX</name>
<description>Command Execution</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>CMDEXSelect</name>
<enumeratedValue>
<name>KEY</name>
<description>Execution Key</description>
<value>0xA5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>PARAM</name>
<description>NVM Parameter</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00060000</resetValue>
<fields>
<field>
<name>NVMP</name>
<description>NVM Pages</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>PSZ</name>
<description>Page Size</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PSZSelect</name>
<enumeratedValue>
<name>8</name>
<description>8 bytes</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 bytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>32</name>
<description>32 bytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64 bytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>128 bytes</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>256 bytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>512</name>
<description>512 bytes</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>1024 bytes</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SEE</name>
<description>SmartEEPROM Supported</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SEESelect</name>
<enumeratedValue>
<name>A</name>
<description>163840 bytes</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>9</name>
<description>147456 bytes</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>8</name>
<description>131072 bytes</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>7</name>
<description>114688 bytes</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>6</name>
<description>98304 bytes</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>5</name>
<description>81920 bytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>4</name>
<description>65536 bytes</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>3</name>
<description>49152 bytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>2</name>
<description>32768 bytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>16384 bytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>0</name>
<description>0 bytes</description>
<value>0x0</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DONE</name>
<description>Command Done Interrupt Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDRE</name>
<description>Address Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PROGE</name>
<description>Programming Error Interrupt Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LOCKE</name>
<description>Lock Error Interrupt Clear</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCSE</name>
<description>ECC Single Error Interrupt Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDE</name>
<description>ECC Dual Error Interrupt Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVME</name>
<description>NVM Error Interrupt Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>Suspended Write Or Erase Interrupt Clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEESFULL</name>
<description>Active SEES Full Interrupt Clear</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEESOVF</name>
<description>Active SEES Overflow Interrupt Clear</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEEWRC</name>
<description>SEE Write Completed Interrupt Clear</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0xE</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DONE</name>
<description>Command Done Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDRE</name>
<description>Address Error Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PROGE</name>
<description>Programming Error Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LOCKE</name>
<description>Lock Error Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCSE</name>
<description>ECC Single Error Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDE</name>
<description>ECC Dual Error Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVME</name>
<description>NVM Error Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>Suspended Write Or Erase Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEESFULL</name>
<description>Active SEES Full Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEESOVF</name>
<description>Active SEES Overflow Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEEWRC</name>
<description>SEE Write Completed Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x10</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DONE</name>
<description>Command Done</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDRE</name>
<description>Address Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PROGE</name>
<description>Programming Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LOCKE</name>
<description>Lock Error</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCSE</name>
<description>ECC Single Error</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCDE</name>
<description>ECC Dual Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVME</name>
<description>NVM Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>Suspended Write Or Erase Operation</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEESFULL</name>
<description>Active SEES Full</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEESOVF</name>
<description>Active SEES Overflow</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEEWRC</name>
<description>SEE Write Completed</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0x12</addressOffset>
<size>16</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>READY</name>
<description>Ready to accept a command</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRM</name>
<description>Power Reduction Mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LOAD</name>
<description>NVM Page Buffer Active Loading</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>NVM Write Or Erase Operation Is Suspended</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AFIRST</name>
<description>BANKA First</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BPDIS</name>
<description>Boot Loader Protection Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOOTPROT</name>
<description>Boot Loader Protection Size</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>BOOTPROTSelect</name>
<enumeratedValue>
<name>0</name>
<description>0 kbytes</description>
<value>0xF</value>
</enumeratedValue>
<enumeratedValue>
<name>8</name>
<description>8 kbytes</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 kbytes</description>
<value>0xD</value>
</enumeratedValue>
<enumeratedValue>
<name>24</name>
<description>24 kbytes</description>
<value>0xC</value>
</enumeratedValue>
<enumeratedValue>
<name>32</name>
<description>32 kbytes</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
<name>40</name>
<description>40 kbytes</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>48</name>
<description>48 kbytes</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>56</name>
<description>56 kbytes</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64 kbytes</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>72</name>
<description>72 kbytes</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>80</name>
<description>80 kbytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>88</name>
<description>88 kbytes</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>96</name>
<description>96 kbytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>104</name>
<description>104 kbytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>112</name>
<description>112 kbytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>120</name>
<description>120 kbytes</description>
<value>0x0</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>ADDR</name>
<description>Address</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<description>NVM Address</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>RUNLOCK</name>
<description>Lock Section</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RUNLOCK</name>
<description>Region Un-Lock Bits</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<name>PBLDATA[%s]</name>
<description>Page Buffer Load Data x</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Page Buffer Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>ECCERR</name>
<description>ECC Error Status Register</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<description>Error Address</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
<field>
<name>TYPEL</name>
<description>Low Double-Word Error Type</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>TYPELSelect</name>
<enumeratedValue>
<name>None</name>
<description>No Error Detected Since Last Read</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>Single</name>
<description>At Least One Single Error Detected Since last Read</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>Dual</name>
<description>At Least One Dual Error Detected Since Last Read</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TYPEH</name>
<description>High Double-Word Error Type</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>TYPEHSelect</name>
<enumeratedValue>
<name>None</name>
<description>No Error Detected Since Last Read</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>Single</name>
<description>At Least One Single Error Detected Since last Read</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>Dual</name>
<description>At Least One Dual Error Detected Since Last Read</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x28</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ECCDIS</name>
<description>Debugger ECC Read Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELOG</name>
<description>Debugger ECC Error Tracking Mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SEECFG</name>
<description>SmartEEPROM Configuration Register</description>
<addressOffset>0x2A</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>WMODE</name>
<description>Write Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>WMODESelect</name>
<enumeratedValue>
<name>UNBUFFERED</name>
<description>A NVM write command is issued after each write in the pagebuffer</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>BUFFERED</name>
<description>A NVM write command is issued when a write to a new page is requested</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>APRDIS</name>
<description>Automatic Page Reallocation Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SEESTAT</name>
<description>SmartEEPROM Status Register</description>
<addressOffset>0x2C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ASEES</name>
<description>Active SmartEEPROM Sector</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LOAD</name>
<description>Page Buffer Loaded</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSY</name>
<description>Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LOCK</name>
<description>SmartEEPROM Write Access Is Locked</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RLOCK</name>
<description>SmartEEPROM Write Access To Register Address Space Is Locked</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SBLK</name>
<description>Blocks Number In a Sector</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PSZ</name>
<description>SmartEEPROM Page Size</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>OSCCTRL</name>
<version>U24011.0.0</version>
<description>Oscillators Control</description>
<groupName>OSCCTRL</groupName>
<prependToName>OSCCTRL_</prependToName>
<baseAddress>0x40001000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x58</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>OSCCTRL_XOSC0</name>
<value>2</value>
</interrupt>
<interrupt>
<name>OSCCTRL_XOSC1</name>
<value>3</value>
</interrupt>
<interrupt>
<name>OSCCTRL_DFLL</name>
<value>4</value>
</interrupt>
<interrupt>
<name>OSCCTRL_DPLL0</name>
<value>5</value>
</interrupt>
<interrupt>
<name>OSCCTRL_DPLL1</name>
<value>6</value>
</interrupt>
<registers>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>CFDEO0</name>
<description>Clock 0 Failure Detector Event Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CFDEO1</name>
<description>Clock 1 Failure Detector Event Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>XOSCRDY0</name>
<description>XOSC 0 Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCRDY1</name>
<description>XOSC 1 Ready Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCFAIL0</name>
<description>XOSC 0 Clock Failure Detector Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCFAIL1</name>
<description>XOSC 1 Clock Failure Detector Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRDY</name>
<description>DFLL Ready Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLOOB</name>
<description>DFLL Out Of Bounds Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKF</name>
<description>DFLL Lock Fine Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKC</name>
<description>DFLL Lock Coarse Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRCS</name>
<description>DFLL Reference Clock Stopped Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LCKR</name>
<description>DPLL0 Lock Rise Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LCKF</name>
<description>DPLL0 Lock Fall Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LTO</name>
<description>DPLL0 Lock Timeout Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LDRTO</name>
<description>DPLL0 Loop Divider Ratio Update Complete Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LCKR</name>
<description>DPLL1 Lock Rise Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LCKF</name>
<description>DPLL1 Lock Fall Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LTO</name>
<description>DPLL1 Lock Timeout Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LDRTO</name>
<description>DPLL1 Loop Divider Ratio Update Complete Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>XOSCRDY0</name>
<description>XOSC 0 Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCRDY1</name>
<description>XOSC 1 Ready Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCFAIL0</name>
<description>XOSC 0 Clock Failure Detector Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCFAIL1</name>
<description>XOSC 1 Clock Failure Detector Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRDY</name>
<description>DFLL Ready Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLOOB</name>
<description>DFLL Out Of Bounds Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKF</name>
<description>DFLL Lock Fine Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKC</name>
<description>DFLL Lock Coarse Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRCS</name>
<description>DFLL Reference Clock Stopped Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LCKR</name>
<description>DPLL0 Lock Rise Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LCKF</name>
<description>DPLL0 Lock Fall Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LTO</name>
<description>DPLL0 Lock Timeout Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LDRTO</name>
<description>DPLL0 Loop Divider Ratio Update Complete Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LCKR</name>
<description>DPLL1 Lock Rise Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LCKF</name>
<description>DPLL1 Lock Fall Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LTO</name>
<description>DPLL1 Lock Timeout Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LDRTO</name>
<description>DPLL1 Loop Divider Ratio Update Complete Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>XOSCRDY0</name>
<description>XOSC 0 Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCRDY1</name>
<description>XOSC 1 Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCFAIL0</name>
<description>XOSC 0 Clock Failure Detector</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCFAIL1</name>
<description>XOSC 1 Clock Failure Detector</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRDY</name>
<description>DFLL Ready</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLOOB</name>
<description>DFLL Out Of Bounds</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKF</name>
<description>DFLL Lock Fine</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKC</name>
<description>DFLL Lock Coarse</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRCS</name>
<description>DFLL Reference Clock Stopped</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LCKR</name>
<description>DPLL0 Lock Rise</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LCKF</name>
<description>DPLL0 Lock Fall</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LTO</name>
<description>DPLL0 Lock Timeout</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LDRTO</name>
<description>DPLL0 Loop Divider Ratio Update Complete</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LCKR</name>
<description>DPLL1 Lock Rise</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LCKF</name>
<description>DPLL1 Lock Fall</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LTO</name>
<description>DPLL1 Lock Timeout</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LDRTO</name>
<description>DPLL1 Loop Divider Ratio Update Complete</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>XOSCRDY0</name>
<description>XOSC 0 Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCRDY1</name>
<description>XOSC 1 Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCFAIL0</name>
<description>XOSC 0 Clock Failure Detector</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCFAIL1</name>
<description>XOSC 1 Clock Failure Detector</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCCKSW0</name>
<description>XOSC 0 Clock Switch</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSCCKSW1</name>
<description>XOSC 1 Clock Switch</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRDY</name>
<description>DFLL Ready</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLOOB</name>
<description>DFLL Out Of Bounds</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKF</name>
<description>DFLL Lock Fine</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKC</name>
<description>DFLL Lock Coarse</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRCS</name>
<description>DFLL Reference Clock Stopped</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LCKR</name>
<description>DPLL0 Lock Rise</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LCKF</name>
<description>DPLL0 Lock Fall</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0TO</name>
<description>DPLL0 Timeout</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL0LDRTO</name>
<description>DPLL0 Loop Divider Ratio Update Complete</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LCKR</name>
<description>DPLL1 Lock Rise</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LCKF</name>
<description>DPLL1 Lock Fall</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1TO</name>
<description>DPLL1 Timeout</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLL1LDRTO</name>
<description>DPLL1 Loop Divider Ratio Update Complete</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<name>XOSCCTRL[%s]</name>
<description>External Multipurpose Crystal Oscillator Control</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<resetValue>0x00000080</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Oscillator Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XTALEN</name>
<description>Crystal Oscillator Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LOWBUFGAIN</name>
<description>Low Buffer Gain Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IPTAT</name>
<description>Oscillator Current Reference</description>
<bitOffset>9</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>IMULT</name>
<description>Oscillator Current Multiplier</description>
<bitOffset>11</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>ENALC</name>
<description>Automatic Loop Control Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CFDEN</name>
<description>Clock Failure Detector Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWBEN</name>
<description>Xosc Clock Switch Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STARTUP</name>
<description>Start-Up Time</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>STARTUPSelect</name>
<enumeratedValue>
<name>CYCLE1</name>
<description>31 us</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE2</name>
<description>61 us</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE4</name>
<description>122 us</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE8</name>
<description>244 us</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE16</name>
<description>488 us</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE32</name>
<description>977 us</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE64</name>
<description>1953 us</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE128</name>
<description>3906 us</description>
<value>7</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE256</name>
<description>7813 us</description>
<value>8</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE512</name>
<description>15625 us</description>
<value>9</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE1024</name>
<description>31250 us</description>
<value>10</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE2048</name>
<description>62500 us</description>
<value>11</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE4096</name>
<description>125000 us</description>
<value>12</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE8192</name>
<description>250000 us</description>
<value>13</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE16384</name>
<description>500000 us</description>
<value>14</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE32768</name>
<description>1000000 us</description>
<value>15</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CFDPRESC</name>
<description>Clock Failure Detector Prescaler</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>CFDPRESCSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>48 MHz</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>24 MHz</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>12 MHz</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>6 MHz</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>3 MHz</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>1.5 MHz</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>0.75 MHz</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>0.3125 MHz</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>DFLLCTRLA</name>
<description>DFLL48M Control A</description>
<addressOffset>0x1C</addressOffset>
<size>8</size>
<resetValue>0x82</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>DFLL Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFLLCTRLB</name>
<description>DFLL48M Control B</description>
<addressOffset>0x20</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>MODE</name>
<description>Operating Mode Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STABLE</name>
<description>Stable DFLL Frequency</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LLAW</name>
<description>Lose Lock After Wake</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USBCRM</name>
<description>USB Clock Recovery Mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCDIS</name>
<description>Chill Cycle Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QLDIS</name>
<description>Quick Lock Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BPLCKC</name>
<description>Bypass Coarse Lock</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITLOCK</name>
<description>Wait Lock</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFLLVAL</name>
<description>DFLL48M Value</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FINE</name>
<description>Fine Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>COARSE</name>
<description>Coarse Value</description>
<bitOffset>10</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>DIFF</name>
<description>Multiplication Ratio Difference</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFLLMUL</name>
<description>DFLL48M Multiplier</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MUL</name>
<description>DFLL Multiply Factor</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>FSTEP</name>
<description>Fine Maximum Step</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>CSTEP</name>
<description>Coarse Maximum Step</description>
<bitOffset>26</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFLLSYNC</name>
<description>DFLL48M Synchronization</description>
<addressOffset>0x2C</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>ENABLE Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLCTRLB</name>
<description>DFLLCTRLB Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLVAL</name>
<description>DFLLVAL Synchronization Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLMUL</name>
<description>DFLLMUL Synchronization Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<cluster>
<dim>2</dim>
<dimIncrement>0x14</dimIncrement>
<name>DPLL[%s]</name>
<description/>
<addressOffset>0x30</addressOffset>
<register>
<name>DPLLCTRLA</name>
<description>DPLL Control A</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x80</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>DPLL Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DPLLRATIO</name>
<description>DPLL Ratio Control</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LDR</name>
<description>Loop Divider Ratio</description>
<bitOffset>0</bitOffset>
<bitWidth>13</bitWidth>
</field>
<field>
<name>LDRFRAC</name>
<description>Loop Divider Ratio Fractional Part</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>DPLLCTRLB</name>
<description>DPLL Control B</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000020</resetValue>
<fields>
<field>
<name>FILTER</name>
<description>Proportional Integral Filter Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>FILTERSelect</name>
<enumeratedValue>
<name>FILTER1</name>
<description>Bandwidth = 92.7Khz and Damping Factor = 0.76</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER2</name>
<description>Bandwidth = 131Khz and Damping Factor = 1.08</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER3</name>
<description>Bandwidth = 46.4Khz and Damping Factor = 0.38</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER4</name>
<description>Bandwidth = 65.6Khz and Damping Factor = 0.54</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER5</name>
<description>Bandwidth = 131Khz and Damping Factor = 0.56</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER6</name>
<description>Bandwidth = 185Khz and Damping Factor = 0.79</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER7</name>
<description>Bandwidth = 65.6Khz and Damping Factor = 0.28</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER8</name>
<description>Bandwidth = 92.7Khz and Damping Factor = 0.39</description>
<value>7</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER9</name>
<description>Bandwidth = 46.4Khz and Damping Factor = 1.49</description>
<value>8</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER10</name>
<description>Bandwidth = 65.6Khz and Damping Factor = 2.11</description>
<value>9</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER11</name>
<description>Bandwidth = 23.2Khz and Damping Factor = 0.75</description>
<value>10</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER12</name>
<description>Bandwidth = 32.8Khz and Damping Factor = 1.06</description>
<value>11</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER13</name>
<description>Bandwidth = 65.6Khz and Damping Factor = 1.07</description>
<value>12</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER14</name>
<description>Bandwidth = 92.7Khz and Damping Factor = 1.51</description>
<value>13</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER15</name>
<description>Bandwidth = 32.8Khz and Damping Factor = 0.53</description>
<value>14</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER16</name>
<description>Bandwidth = 46.4Khz and Damping Factor = 0.75</description>
<value>15</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WUF</name>
<description>Wake Up Fast</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REFCLK</name>
<description>Reference Clock Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>REFCLKSelect</name>
<enumeratedValue>
<name>GCLK</name>
<description>Dedicated GCLK clock reference</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>XOSC32</name>
<description>XOSC32K clock reference</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>XOSC0</name>
<description>XOSC0 clock reference</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>XOSC1</name>
<description>XOSC1 clock reference</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LTIME</name>
<description>Lock Time</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>LTIMESelect</name>
<enumeratedValue>
<name>DEFAULT</name>
<description>No time-out. Automatic lock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>800US</name>
<description>Time-out if no lock within 800us</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>900US</name>
<description>Time-out if no lock within 900us</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>1MS</name>
<description>Time-out if no lock within 1ms</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1P1MS</name>
<description>Time-out if no lock within 1.1ms</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LBYPASS</name>
<description>Lock Bypass</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCOFILTER</name>
<description>Sigma-Delta DCO Filter Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>DCOFILTERSelect</name>
<enumeratedValue>
<name>FILTER1</name>
<description>Capacitor(pF) = 0.5 and Bandwidth Fn (MHz) = 3.21</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER2</name>
<description>Capacitor(pF) = 1 and Bandwidth Fn (MHz) = 1.6</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER3</name>
<description>Capacitor(pF) = 1.5 and Bandwidth Fn (MHz) = 1.1</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER4</name>
<description>Capacitor(pF) = 2 and Bandwidth Fn (MHz) = 0.8</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER5</name>
<description>Capacitor(pF) = 2.5 and Bandwidth Fn (MHz) = 0.64</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER6</name>
<description>Capacitor(pF) = 3 and Bandwidth Fn (MHz) = 0.55</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER7</name>
<description>Capacitor(pF) = 3.5 and Bandwidth Fn (MHz) = 0.45</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER8</name>
<description>Capacitor(pF) = 4 and Bandwidth Fn (MHz) = 0.4</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DCOEN</name>
<description>DCO Filter Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIV</name>
<description>Clock Divider</description>
<bitOffset>16</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>DPLLSYNCBUSY</name>
<description>DPLL Synchronization Busy</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>DPLL Enable Synchronization Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLLRATIO</name>
<description>DPLL Loop Divider Ratio Synchronization Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DPLLSTATUS</name>
<description>DPLL Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>LOCK</name>
<description>DPLL Lock Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLKRDY</name>
<description>DPLL Clock Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster>
</registers>
</peripheral>
<peripheral>
<name>OSC32KCTRL</name>
<version>U24001.0.0</version>
<description>32kHz Oscillators Control</description>
<groupName>OSC32KCTRL</groupName>
<prependToName>OSC32KCTRL_</prependToName>
<baseAddress>0x40001400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x20</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>OSC32KCTRL</name>
<value>7</value>
</interrupt>
<registers>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>XOSC32KRDY</name>
<description>XOSC32K Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSC32KFAIL</name>
<description>XOSC32K Clock Failure Detector Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>XOSC32KRDY</name>
<description>XOSC32K Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSC32KFAIL</name>
<description>XOSC32K Clock Failure Detector Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>XOSC32KRDY</name>
<description>XOSC32K Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSC32KFAIL</name>
<description>XOSC32K Clock Failure Detector</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Power and Clocks Status</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>XOSC32KRDY</name>
<description>XOSC32K Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSC32KFAIL</name>
<description>XOSC32K Clock Failure Detector</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XOSC32KSW</name>
<description>XOSC32K Clock switch</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RTCCTRL</name>
<description>RTC Clock Selection</description>
<addressOffset>0x10</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>RTCSEL</name>
<description>RTC Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>RTCSELSelect</name>
<enumeratedValue>
<name>ULP1K</name>
<description>1.024kHz from 32kHz internal ULP oscillator</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ULP32K</name>
<description>32.768kHz from 32kHz internal ULP oscillator</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>XOSC1K</name>
<description>1.024kHz from 32.768kHz internal oscillator</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>XOSC32K</name>
<description>32.768kHz from 32.768kHz external crystal oscillator</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>XOSC32K</name>
<description>32kHz External Crystal Oscillator (XOSC32K) Control</description>
<addressOffset>0x14</addressOffset>
<size>16</size>
<resetValue>0x2080</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Oscillator Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XTALEN</name>
<description>Crystal Oscillator Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN32K</name>
<description>32kHz Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN1K</name>
<description>1kHz Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STARTUP</name>
<description>Oscillator Start-Up Time</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>STARTUPSelect</name>
<enumeratedValue>
<name>CYCLE2048</name>
<description>62.6 ms</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE4096</name>
<description>125 ms</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE16384</name>
<description>500 ms</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE32768</name>
<description>1000 ms</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE65536</name>
<description>2000 ms</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE131072</name>
<description>4000 ms</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>CYCLE262144</name>
<description>8000 ms</description>
<value>6</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WRTLOCK</name>
<description>Write Lock</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CGM</name>
<description>Control Gain Mode</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CGMSelect</name>
<enumeratedValue>
<name>XT</name>
<description>Standard mode</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>HS</name>
<description>High Speed mode</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CFDCTRL</name>
<description>Clock Failure Detector Control</description>
<addressOffset>0x16</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>CFDEN</name>
<description>Clock Failure Detector Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWBACK</name>
<description>Clock Switch Back</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CFDPRESC</name>
<description>Clock Failure Detector Prescaler</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x17</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>CFDEO</name>
<description>Clock Failure Detector Event Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OSCULP32K</name>
<description>32kHz Ultra Low Power Internal Oscillator (OSCULP32K) Control</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EN32K</name>
<description>Enable Out 32k</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN1K</name>
<description>Enable Out 1k</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CALIB</name>
<description>Oscillator Calibration</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>WRTLOCK</name>
<description>Write Lock</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PAC</name>
<version>U21201.2.0</version>
<description>Peripheral Access Controller</description>
<groupName>PAC</groupName>
<prependToName>PAC_</prependToName>
<baseAddress>0x40000000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x44</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PAC</name>
<value>41</value>
</interrupt>
<registers>
<register>
<name>WRCTRL</name>
<description>Write control</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PERID</name>
<description>Peripheral identifier</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>KEY</name>
<description>Peripheral access control key</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>KEYSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>No action</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CLR</name>
<description>Clear protection</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set protection</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>SETLCK</name>
<description>Set and lock protection</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event control</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ERREO</name>
<description>Peripheral acess error event output</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt enable clear</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ERR</name>
<description>Peripheral access error interrupt disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt enable set</description>
<addressOffset>0x9</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ERR</name>
<description>Peripheral access error interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAGAHB</name>
<description>Bridge interrupt flag status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FLASH_</name>
<description>FLASH</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLASH_ALT_</name>
<description>FLASH_ALT</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEEPROM_</name>
<description>SEEPROM</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMCM4S_</name>
<description>RAMCM4S</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMPPPDSU_</name>
<description>RAMPPPDSU</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMDMAWR_</name>
<description>RAMDMAWR</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMDMACICM_</name>
<description>RAMDMACICM</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB0_</name>
<description>HPB0</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB1_</name>
<description>HPB1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB2_</name>
<description>HPB2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB3_</name>
<description>HPB3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PUKCC_</name>
<description>PUKCC</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDHC0_</name>
<description>SDHC0</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QSPI_</name>
<description>QSPI</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKUPRAM_</name>
<description>BKUPRAM</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAGA</name>
<description>Peripheral interrupt flag status - Bridge A</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PAC_</name>
<description>PAC</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PM_</name>
<description>PM</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCLK_</name>
<description>MCLK</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTC_</name>
<description>RSTC</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSCCTRL_</name>
<description>OSCCTRL</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSC32KCTRL_</name>
<description>OSC32KCTRL</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUPC_</name>
<description>SUPC</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GCLK_</name>
<description>GCLK</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDT_</name>
<description>WDT</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTC_</name>
<description>RTC</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EIC_</name>
<description>EIC</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FREQM_</name>
<description>FREQM</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM0_</name>
<description>SERCOM0</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM1_</name>
<description>SERCOM1</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC0_</name>
<description>TC0</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1_</name>
<description>TC1</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAGB</name>
<description>Peripheral interrupt flag status - Bridge B</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>USB_</name>
<description>USB</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DSU_</name>
<description>DSU</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVMCTRL_</name>
<description>NVMCTRL</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMCC_</name>
<description>CMCC</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PORT_</name>
<description>PORT</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAC_</name>
<description>DMAC</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HMATRIX_</name>
<description>HMATRIX</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVSYS_</name>
<description>EVSYS</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM2_</name>
<description>SERCOM2</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM3_</name>
<description>SERCOM3</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC0_</name>
<description>TCC0</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC1_</name>
<description>TCC1</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC2_</name>
<description>TC2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC3_</name>
<description>TC3</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMECC_</name>
<description>RAMECC</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAGC</name>
<description>Peripheral interrupt flag status - Bridge C</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCC2_</name>
<description>TCC2</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC3_</name>
<description>TCC3</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC4_</name>
<description>TC4</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC5_</name>
<description>TC5</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PDEC_</name>
<description>PDEC</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AC_</name>
<description>AC</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AES_</name>
<description>AES</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRNG_</name>
<description>TRNG</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ICM_</name>
<description>ICM</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PUKCC_</name>
<description>PUKCC</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QSPI_</name>
<description>QSPI</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCL_</name>
<description>CCL</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAGD</name>
<description>Peripheral interrupt flag status - Bridge D</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SERCOM4_</name>
<description>SERCOM4</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM5_</name>
<description>SERCOM5</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC4_</name>
<description>TCC4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC0_</name>
<description>ADC0</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC1_</name>
<description>ADC1</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAC_</name>
<description>DAC</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2S_</name>
<description>I2S</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PCC_</name>
<description>PCC</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSA</name>
<description>Peripheral write protection status - Bridge A</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00010000</resetValue>
<fields>
<field>
<name>PAC_</name>
<description>PAC APB Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PM_</name>
<description>PM APB Protect Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCLK_</name>
<description>MCLK APB Protect Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTC_</name>
<description>RSTC APB Protect Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSCCTRL_</name>
<description>OSCCTRL APB Protect Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSC32KCTRL_</name>
<description>OSC32KCTRL APB Protect Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUPC_</name>
<description>SUPC APB Protect Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GCLK_</name>
<description>GCLK APB Protect Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDT_</name>
<description>WDT APB Protect Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTC_</name>
<description>RTC APB Protect Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EIC_</name>
<description>EIC APB Protect Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FREQM_</name>
<description>FREQM APB Protect Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM0_</name>
<description>SERCOM0 APB Protect Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM1_</name>
<description>SERCOM1 APB Protect Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC0_</name>
<description>TC0 APB Protect Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1_</name>
<description>TC1 APB Protect Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSB</name>
<description>Peripheral write protection status - Bridge B</description>
<addressOffset>0x38</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000002</resetValue>
<fields>
<field>
<name>USB_</name>
<description>USB APB Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DSU_</name>
<description>DSU APB Protect Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVMCTRL_</name>
<description>NVMCTRL APB Protect Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMCC_</name>
<description>CMCC APB Protect Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PORT_</name>
<description>PORT APB Protect Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAC_</name>
<description>DMAC APB Protect Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HMATRIX_</name>
<description>HMATRIX APB Protect Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVSYS_</name>
<description>EVSYS APB Protect Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM2_</name>
<description>SERCOM2 APB Protect Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM3_</name>
<description>SERCOM3 APB Protect Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC0_</name>
<description>TCC0 APB Protect Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC1_</name>
<description>TCC1 APB Protect Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC2_</name>
<description>TC2 APB Protect Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC3_</name>
<description>TC3 APB Protect Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMECC_</name>
<description>RAMECC APB Protect Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSC</name>
<description>Peripheral write protection status - Bridge C</description>
<addressOffset>0x3C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TCC2_</name>
<description>TCC2 APB Protect Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC3_</name>
<description>TCC3 APB Protect Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC4_</name>
<description>TC4 APB Protect Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC5_</name>
<description>TC5 APB Protect Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PDEC_</name>
<description>PDEC APB Protect Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AC_</name>
<description>AC APB Protect Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AES_</name>
<description>AES APB Protect Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRNG_</name>
<description>TRNG APB Protect Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ICM_</name>
<description>ICM APB Protect Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PUKCC_</name>
<description>PUKCC APB Protect Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QSPI_</name>
<description>QSPI APB Protect Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCL_</name>
<description>CCL APB Protect Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSD</name>
<description>Peripheral write protection status - Bridge D</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SERCOM4_</name>
<description>SERCOM4 APB Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM5_</name>
<description>SERCOM5 APB Protect Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC4_</name>
<description>TCC4 APB Protect Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC0_</name>
<description>ADC0 APB Protect Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC1_</name>
<description>ADC1 APB Protect Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAC_</name>
<description>DAC APB Protect Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>I2S_</name>
<description>I2S APB Protect Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PCC_</name>
<description>PCC APB Protect Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PCC</name>
<version>U20171.1.0</version>
<description>Parallel Capture Controller</description>
<groupName>PCC</groupName>
<prependToName>PCC_</prependToName>
<baseAddress>0x43002C00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0xE8</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PCC</name>
<value>129</value>
</interrupt>
<registers>
<register>
<name>MR</name>
<description>Mode Register</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PCEN</name>
<description>Parallel Capture Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DSIZE</name>
<description>Data size</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SCALE</name>
<description>Scale data</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALWYS</name>
<description>Always Sampling</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HALFS</name>
<description>Half Sampling</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FRSTS</name>
<description>First sample</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISIZE</name>
<description>Input Data Size</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CID</name>
<description>Clear If Disabled</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>IER</name>
<description>Interrupt Enable Register</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DRDY</name>
<description>Data Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IDR</name>
<description>Interrupt Disable Register</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DRDY</name>
<description>Data Ready Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IMR</name>
<description>Interrupt Mask Register</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DRDY</name>
<description>Data Ready Interrupt Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ISR</name>
<description>Interrupt Status Register</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DRDY</name>
<description>Data Ready Interrupt Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVRE</name>
<description>Overrun Error Interrupt Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RHR</name>
<description>Reception Holding Register</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RDATA</name>
<description>Reception Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>WPMR</name>
<description>Write Protection Mode Register</description>
<addressOffset>0xE0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPEN</name>
<description>Write Protection Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WPKEY</name>
<description>Write Protection Key</description>
<bitOffset>8</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>WPSR</name>
<description>Write Protection Status Register</description>
<addressOffset>0xE4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WPVS</name>
<description>Write Protection Violation Source</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WPVSRC</name>
<description>Write Protection Violation Status</description>
<bitOffset>8</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PDEC</name>
<version>U22631.0.0</version>
<description>Quadrature Decodeur</description>
<groupName>PDEC</groupName>
<prependToName>PDEC_</prependToName>
<baseAddress>0x42001C00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x38</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PDEC_OTHER</name>
<value>115</value>
</interrupt>
<interrupt>
<name>PDEC_MC0</name>
<value>116</value>
</interrupt>
<interrupt>
<name>PDEC_MC1</name>
<value>117</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operation Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>QDEC</name>
<description>QDEC operating mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALL</name>
<description>HALL operating mode</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNTER</name>
<description>COUNTER operating mode</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CONF</name>
<description>PDEC Configuration</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CONFSelect</name>
<enumeratedValue>
<name>X4</name>
<description>Quadrature decoder direction</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>X4S</name>
<description>Secure Quadrature decoder direction</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>X2</name>
<description>Decoder direction</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>X2S</name>
<description>Secure decoder direction</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>AUTOC</name>
<description>Auto correction mode</description>
<value>4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ALOCK</name>
<description>Auto Lock</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP</name>
<description>PDEC Phase A and B Swap</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREN</name>
<description>Period Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINEN0</name>
<description>PDEC Input From Pin 0 Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINEN1</name>
<description>PDEC Input From Pin 1 Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINEN2</name>
<description>PDEC Input From Pin 2 Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINVEN0</name>
<description>IO Pin 0 Invert Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINVEN1</name>
<description>IO Pin 1 Invert Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINVEN2</name>
<description>IO Pin 2 Invert Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ANGULAR</name>
<description>Angular Counter Length</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>MAXCMP</name>
<description>Maximum Consecutive Missing Pulses</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLBCLR</name>
<description>Control B Clear</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a counter restart or retrigger</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double buffered registers</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>START</name>
<description>Start QDEC/HALL</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Stop QDEC/HALL</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLBSET</name>
<description>Control B Set</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a counter restart or retrigger</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double buffered registers</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>START</name>
<description>Start QDEC/HALL</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Stop QDEC/HALL</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x6</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>EVACT</name>
<description>Event Action</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>EVACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Event action disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Start, restart or retrigger on event</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT</name>
<description>Count on event</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EVINV</name>
<description>Inverted Event Input Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>EVEI</name>
<description>Event Input Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>OVFEO</name>
<description>Overflow/Underflow Output Event Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERREO</name>
<description>Error Output Event Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIREO</name>
<description>Direction Output Event Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VLCEO</name>
<description>Velocity Output Event Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO0</name>
<description>Match Channel 0 Event Output Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO1</name>
<description>Match Channel 1 Event Output Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVF</name>
<description>Overflow/Underflow Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>Error Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Direction Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VLC</name>
<description>Velocity Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>Channel 0 Compare Match Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>Channel 1 Compare Match Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x9</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVF</name>
<description>Overflow/Underflow Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>Error Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Direction Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VLC</name>
<description>Velocity Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>Channel 0 Compare Match Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>Channel 1 Compare Match Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0xA</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVF</name>
<description>Overflow/Underflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Direction Change</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VLC</name>
<description>Velocity</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>Channel 0 Compare Match</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>Channel 1 Compare Match</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0040</resetValue>
<fields>
<field>
<name>QERR</name>
<description>Quadrature Error Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDXERR</name>
<description>Index Error Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MPERR</name>
<description>Missing Pulse Error flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINERR</name>
<description>Window Error Flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HERR</name>
<description>Hall Error Flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STOP</name>
<description>Stop</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Direction Status Flag</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCBUFV</name>
<description>Prescaler Buffer Valid</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FILTERBUFV</name>
<description>Filter Buffer Valid</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV0</name>
<description>Compare Channel 0 Buffer Valid</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV1</name>
<description>Compare Channel 1 Buffer Valid</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0xF</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGRUN</name>
<description>Debug Run Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>Control B Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STATUS</name>
<description>Status Synchronization Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESC</name>
<description>Prescaler Synchronization Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FILTER</name>
<description>Filter Synchronization Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNT</name>
<description>Count Synchronization Busy</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC0</name>
<description>Compare Channel 0 Synchronization Busy</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1</name>
<description>Compare Channel 1 Synchronization Busy</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PRESC</name>
<description>Prescaler Value</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>PRESC</name>
<description>Prescaler Value</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>PRESCSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>No division</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Divide by 2</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Divide by 4</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Divide by 8</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Divide by 16</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>Divide by 32</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Divide by 64</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>Divide by 128</description>
<value>7</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Divide by 256</description>
<value>8</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV512</name>
<description>Divide by 512</description>
<value>9</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>Divide by 1024</description>
<value>10</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>FILTER</name>
<description>Filter Value</description>
<addressOffset>0x15</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>FILTER</name>
<description>Filter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>PRESCBUF</name>
<description>Prescaler Buffer Value</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>PRESCBUF</name>
<description>Prescaler Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>PRESCBUFSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>No division</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Divide by 2</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Divide by 4</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Divide by 8</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Divide by 16</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>Divide by 32</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Divide by 64</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>Divide by 128</description>
<value>7</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Divide by 256</description>
<value>8</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV512</name>
<description>Divide by 512</description>
<value>9</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>Divide by 1024</description>
<value>10</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>FILTERBUF</name>
<description>Filter Buffer Value</description>
<addressOffset>0x19</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>FILTERBUF</name>
<description>Filter Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT</name>
<description>Counter Value</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<name>CC[%s]</name>
<description>Channel n Compare Value</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CC</name>
<description>Channel Compare Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<name>CCBUF[%s]</name>
<description>Channel Compare Buffer Value</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCBUF</name>
<description>Channel Compare Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PM</name>
<version>U24061.0.0</version>
<description>Power Manager</description>
<groupName>PM</groupName>
<prependToName>PM_</prependToName>
<baseAddress>0x40000400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x13</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>PM</name>
<value>0</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>IORET</name>
<description>I/O Retention</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SLEEPCFG</name>
<description>Sleep Configuration</description>
<addressOffset>0x1</addressOffset>
<size>8</size>
<resetValue>0x02</resetValue>
<fields>
<field>
<name>SLEEPMODE</name>
<description>Sleep Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SLEEPMODESelect</name>
<enumeratedValue>
<name>IDLE</name>
<description>CPU, AHBx, and APBx clocks are OFF</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>STANDBY</name>
<description>All Clocks are OFF</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>HIBERNATE</name>
<description>Backup domain is ON as well as some PDRAMs</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>BACKUP</name>
<description>Only Backup domain is powered ON</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>OFF</name>
<description>All power domains are powered OFF</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SLEEPRDY</name>
<description>Sleep Mode Entry Ready Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SLEEPRDY</name>
<description>Sleep Mode Entry Ready Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x6</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SLEEPRDY</name>
<description>Sleep Mode Entry Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STDBYCFG</name>
<description>Standby Configuration</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>RAMCFG</name>
<description>Ram Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>RAMCFGSelect</name>
<enumeratedValue>
<name>RET</name>
<description>All the system RAM is retained</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PARTIAL</name>
<description>Only the first 32Kbytes of the system RAM is retained</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>OFF</name>
<description>All the system RAM is turned OFF</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FASTWKUP</name>
<description>Fast Wakeup</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>FASTWKUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Fast Wakeup is disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>NVM</name>
<description>Fast Wakeup is enabled on NVM</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>MAINVREG</name>
<description>Fast Wakeup is enabled on the main voltage regulator (MAINVREG)</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Fast Wakeup is enabled on both NVM and MAINVREG</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>HIBCFG</name>
<description>Hibernate Configuration</description>
<addressOffset>0x9</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>RAMCFG</name>
<description>Ram Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>RAMCFGSelect</name>
<enumeratedValue>
<name>RET</name>
<description>All the system RAM is retained</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PARTIAL</name>
<description>Only the first 32Kbytes of the system RAM is retained</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>OFF</name>
<description>All the system RAM is turned OFF</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BRAMCFG</name>
<description>Backup Ram Configuration</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>BRAMCFGSelect</name>
<enumeratedValue>
<name>RET</name>
<description>All the backup RAM is retained</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PARTIAL</name>
<description>Only the first 4Kbytes of the backup RAM is retained</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>OFF</name>
<description>All the backup RAM is turned OFF</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BKUPCFG</name>
<description>Backup Configuration</description>
<addressOffset>0xA</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>BRAMCFG</name>
<description>Ram Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>BRAMCFGSelect</name>
<enumeratedValue>
<name>RET</name>
<description>All the backup RAM is retained</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PARTIAL</name>
<description>Only the first 4Kbytes of the backup RAM is retained</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>OFF</name>
<description>All the backup RAM is turned OFF</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>PWSAKDLY</name>
<description>Power Switch Acknowledge Delay</description>
<addressOffset>0x12</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DLYVAL</name>
<description>Delay Value</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>IGNACK</name>
<description>Ignore Acknowledge</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PORT</name>
<version>U22102.2.0</version>
<description>Port Module</description>
<groupName>PORT</groupName>
<prependToName>PORT_</prependToName>
<baseAddress>0x41008000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x100</size>
<usage>registers</usage>
</addressBlock>
<registers>
<cluster>
<dim>2</dim>
<dimIncrement>0x80</dimIncrement>
<name>GROUP[%s]</name>
<description/>
<addressOffset>0x00</addressOffset>
<register>
<name>DIR</name>
<description>Data Direction</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIR</name>
<description>Port Data Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DIRCLR</name>
<description>Data Direction Clear</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIRCLR</name>
<description>Port Data Direction Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DIRSET</name>
<description>Data Direction Set</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIRSET</name>
<description>Port Data Direction Set</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DIRTGL</name>
<description>Data Direction Toggle</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DIRTGL</name>
<description>Port Data Direction Toggle</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OUT</name>
<description>Data Output Value</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OUT</name>
<description>PORT Data Output Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OUTCLR</name>
<description>Data Output Value Clear</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OUTCLR</name>
<description>PORT Data Output Value Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OUTSET</name>
<description>Data Output Value Set</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OUTSET</name>
<description>PORT Data Output Value Set</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>OUTTGL</name>
<description>Data Output Value Toggle</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OUTTGL</name>
<description>PORT Data Output Value Toggle</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>IN</name>
<description>Data Input Value</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IN</name>
<description>PORT Data Input Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRL</name>
<description>Control</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SAMPLING</name>
<description>Input Sampling Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>WRCONFIG</name>
<description>Write Configuration</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PINMASK</name>
<description>Pin Mask for Multiple Pin Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>PMUXEN</name>
<description>Peripheral Multiplexer Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INEN</name>
<description>Input Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PULLEN</name>
<description>Pull Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRVSTR</name>
<description>Output Driver Strength Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PMUX</name>
<description>Peripheral Multiplexing</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>WRPMUX</name>
<description>Write PMUX</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRPINCFG</name>
<description>Write PINCFG</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HWSEL</name>
<description>Half-Word Select</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Input Control</description>
<addressOffset>0x2C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PID0</name>
<description>PORT Event Pin Identifier 0</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>EVACT0</name>
<description>PORT Event Action 0</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>EVACT0Select</name>
<enumeratedValue>
<name>OUT</name>
<description>Event output to pin</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set output register of pin on event</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLR</name>
<description>Clear output register of pin on event</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TGL</name>
<description>Toggle output register of pin on event</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PORTEI0</name>
<description>PORT Event Input Enable 0</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PID1</name>
<description>PORT Event Pin Identifier 1</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>EVACT1</name>
<description>PORT Event Action 1</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PORTEI1</name>
<description>PORT Event Input Enable 1</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PID2</name>
<description>PORT Event Pin Identifier 2</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>EVACT2</name>
<description>PORT Event Action 2</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PORTEI2</name>
<description>PORT Event Input Enable 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PID3</name>
<description>PORT Event Pin Identifier 3</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>EVACT3</name>
<description>PORT Event Action 3</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PORTEI3</name>
<description>PORT Event Input Enable 3</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>16</dim>
<dimIncrement>1</dimIncrement>
<name>PMUX[%s]</name>
<description>Peripheral Multiplexing</description>
<addressOffset>0x30</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>PMUXE</name>
<description>Peripheral Multiplexing for Even-Numbered Pin</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PMUXO</name>
<description>Peripheral Multiplexing for Odd-Numbered Pin</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<dim>32</dim>
<dimIncrement>1</dimIncrement>
<name>PINCFG[%s]</name>
<description>Pin Configuration</description>
<addressOffset>0x40</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>PMUXEN</name>
<description>Peripheral Multiplexer Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INEN</name>
<description>Input Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PULLEN</name>
<description>Pull Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRVSTR</name>
<description>Output Driver Strength Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster>
</registers>
</peripheral>
<peripheral>
<name>QSPI</name>
<version>U20081.6.3</version>
<description>Quad SPI interface</description>
<groupName>QSPI</groupName>
<prependToName>QSPI_</prependToName>
<baseAddress>0x42003400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x48</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>QSPI</name>
<value>134</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LASTXFER</name>
<description>Last Transfer</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>Control B</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MODE</name>
<description>Serial Memory Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>SPI</name>
<description>SPI operating mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>MEMORY</name>
<description>Serial Memory operating mode</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LOOPEN</name>
<description>Local Loopback Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDRBT</name>
<description>Wait Data Read Before Transfer</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SMEMREG</name>
<description>Serial Memory reg</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSMODE</name>
<description>Chip Select Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CSMODESelect</name>
<enumeratedValue>
<name>NORELOAD</name>
<description>The chip select is deasserted if TD has not been reloaded before the end of the current transfer.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LASTXFER</name>
<description>The chip select is deasserted when the bit LASTXFER is written at 1 and the character written in TD has been transferred.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SYSTEMATICALLY</name>
<description>The chip select is deasserted systematically after each transfer.</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATALEN</name>
<description>Data Length</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>DATALENSelect</name>
<enumeratedValue>
<name>8BITS</name>
<description>8-bits transfer</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>9BITS</name>
<description>9 bits transfer</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>10BITS</name>
<description>10-bits transfer</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>11BITS</name>
<description>11-bits transfer</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>12BITS</name>
<description>12-bits transfer</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>13BITS</name>
<description>13-bits transfer</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>14BITS</name>
<description>14-bits transfer</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>15BITS</name>
<description>15-bits transfer</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>16BITS</name>
<description>16-bits transfer</description>
<value>0x8</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DLYBCT</name>
<description>Delay Between Consecutive Transfers</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DLYCS</name>
<description>Minimum Inactive CS Delay</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>BAUD</name>
<description>Baud Rate</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CPOL</name>
<description>Clock Polarity</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPHA</name>
<description>Clock Phase</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BAUD</name>
<description>Serial Clock Baud Rate</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DLYBS</name>
<description>Delay Before SCK</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>RXDATA</name>
<description>Receive Data</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Receive Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>TXDATA</name>
<description>Transmit Data</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Transmit Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXC</name>
<description>Receive Data Register Full Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRE</name>
<description>Transmit Data Register Empty Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmission Complete Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Overrun Error Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSRISE</name>
<description>Chip Select Rise Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INSTREND</name>
<description>Instruction End Interrupt Disable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXC</name>
<description>Receive Data Register Full Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRE</name>
<description>Transmit Data Register Empty Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmission Complete Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Overrun Error Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSRISE</name>
<description>Chip Select Rise Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INSTREND</name>
<description>Instruction End Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RXC</name>
<description>Receive Data Register Full</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRE</name>
<description>Transmit Data Register Empty</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmission Complete</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Overrun Error</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSRISE</name>
<description>Chip Select Rise</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INSTREND</name>
<description>Instruction End</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status Register</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000200</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CSSTATUS</name>
<description>Chip Select</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INSTRADDR</name>
<description>Instruction Address</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<description>Instruction Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>INSTRCTRL</name>
<description>Instruction Code</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INSTR</name>
<description>Instruction Code</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>OPTCODE</name>
<description>Option Code</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>INSTRFRAME</name>
<description>Instruction Frame</description>
<addressOffset>0x38</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WIDTH</name>
<description>Instruction Code, Address, Option Code and Data Width</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>WIDTHSelect</name>
<enumeratedValue>
<name>SINGLE_BIT_SPI</name>
<description>Instruction: Single-bit SPI / Address-Option: Single-bit SPI / Data: Single-bit SPI</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DUAL_OUTPUT</name>
<description>Instruction: Single-bit SPI / Address-Option: Single-bit SPI / Data: Dual SPI</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>QUAD_OUTPUT</name>
<description>Instruction: Single-bit SPI / Address-Option: Single-bit SPI / Data: Quad SPI</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DUAL_IO</name>
<description>Instruction: Single-bit SPI / Address-Option: Dual SPI / Data: Dual SPI</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>QUAD_IO</name>
<description>Instruction: Single-bit SPI / Address-Option: Quad SPI / Data: Quad SPI</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DUAL_CMD</name>
<description>Instruction: Dual SPI / Address-Option: Dual SPI / Data: Dual SPI</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>QUAD_CMD</name>
<description>Instruction: Quad SPI / Address-Option: Quad SPI / Data: Quad SPI</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>INSTREN</name>
<description>Instruction Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDREN</name>
<description>Address Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPTCODEEN</name>
<description>Option Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATAEN</name>
<description>Data Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPTCODELEN</name>
<description>Option Code Length</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>OPTCODELENSelect</name>
<enumeratedValue>
<name>1BIT</name>
<description>1-bit length option code</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2BITS</name>
<description>2-bits length option code</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>4BITS</name>
<description>4-bits length option code</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8BITS</name>
<description>8-bits length option code</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ADDRLEN</name>
<description>Address Length</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ADDRLENSelect</name>
<enumeratedValue>
<name>24BITS</name>
<description>24-bits address length</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>32BITS</name>
<description>32-bits address length</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TFRTYPE</name>
<description>Data Transfer Type</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>TFRTYPESelect</name>
<enumeratedValue>
<name>READ</name>
<description>Read transfer from the serial memory.Scrambling is not performed.Read at random location (fetch) in the serial flash memory is not possible.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>READMEMORY</name>
<description>Read data transfer from the serial memory.If enabled, scrambling is performed.Read at random location (fetch) in the serial flash memory is possible.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WRITE</name>
<description>Write transfer into the serial memory.Scrambling is not performed.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>WRITEMEMORY</name>
<description>Write data transfer into the serial memory.If enabled, scrambling is performed.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CRMODE</name>
<description>Continuous Read Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DDREN</name>
<description>Double Data Rate Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DUMMYLEN</name>
<description>Dummy Cycles Length</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>SCRAMBCTRL</name>
<description>Scrambling Mode</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Scrambling/Unscrambling Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RANDOMDIS</name>
<description>Scrambling/Unscrambling Random Value Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SCRAMBKEY</name>
<description>Scrambling Key</description>
<addressOffset>0x44</addressOffset>
<size>32</size>
<access>write-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>KEY</name>
<description>Scrambling User Key</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RAMECC</name>
<version>U22681.0.0</version>
<description>RAM ECC</description>
<groupName>RAMECC</groupName>
<prependToName>RAMECC_</prependToName>
<baseAddress>0x41020000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x10</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>RAMECC</name>
<value>45</value>
</interrupt>
<registers>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SINGLEE</name>
<description>Single Bit ECC Error Interrupt Enable Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DUALE</name>
<description>Dual Bit ECC Error Interrupt Enable Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x1</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SINGLEE</name>
<description>Single Bit ECC Error Interrupt Enable Set</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DUALE</name>
<description>Dual Bit ECC Error Interrupt Enable Set</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag</description>
<addressOffset>0x2</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SINGLEE</name>
<description>Single Bit ECC Error Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DUALE</name>
<description>Dual Bit ECC Error Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0x3</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ECCDIS</name>
<description>ECC Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ERRADDR</name>
<description>Error Address</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ERRADDR</name>
<description>Error Address</description>
<bitOffset>0</bitOffset>
<bitWidth>17</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0xF</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ECCDIS</name>
<description>ECC Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ECCELOG</name>
<description>ECC Error Log</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RSTC</name>
<version>U22394.0.0</version>
<description>Reset Controller</description>
<groupName>RSTC</groupName>
<prependToName>RSTC_</prependToName>
<baseAddress>0x40000C00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x3</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>RCAUSE</name>
<description>Reset Cause</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>POR</name>
<description>Power On Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BODCORE</name>
<description>Brown Out CORE Detector Reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BODVDD</name>
<description>Brown Out VDD Detector Reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVM</name>
<description>NVM Reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXT</name>
<description>External Reset</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDT</name>
<description>Watchdog Reset</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYST</name>
<description>System Reset Request</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BACKUP</name>
<description>Backup Reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BKUPEXIT</name>
<description>Backup Exit Source</description>
<addressOffset>0x2</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>RTC</name>
<description>Real Timer Counter Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BBPS</name>
<description>Battery Backup Power Switch</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HIB</name>
<description>Hibernate</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RTC</name>
<version>U22502.1.0</version>
<description>Real-Time Counter</description>
<groupName>RTC</groupName>
<prependToName>RTC_</prependToName>
<baseAddress>0x40002400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0xA0</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>RTC</name>
<value>11</value>
</interrupt>
<registers>
<cluster>
<name>MODE0</name>
<description>32-bit Counter with Single 32-bit Compare</description>
<headerStructName>RtcMode0</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>MODE0 Control A</description>
<addressOffset>0x0</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>COUNT32</name>
<description>Mode 0: 32-bit Counter</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT16</name>
<description>Mode 1: 16-bit Counter</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLOCK</name>
<description>Mode 2: Clock/Calendar</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MATCHCLR</name>
<description>Clear on Match</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>CLK_RTC_CNT = GCLK_RTC/1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1</name>
<description>CLK_RTC_CNT = GCLK_RTC/1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>CLK_RTC_CNT = GCLK_RTC/2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>CLK_RTC_CNT = GCLK_RTC/4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>CLK_RTC_CNT = GCLK_RTC/8</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>CLK_RTC_CNT = GCLK_RTC/16</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>CLK_RTC_CNT = GCLK_RTC/32</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>CLK_RTC_CNT = GCLK_RTC/64</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>CLK_RTC_CNT = GCLK_RTC/128</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>CLK_RTC_CNT = GCLK_RTC/256</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV512</name>
<description>CLK_RTC_CNT = GCLK_RTC/512</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>CLK_RTC_CNT = GCLK_RTC/1024</description>
<value>0xB</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BKTRST</name>
<description>BKUP Registers Reset On Tamper Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPTRST</name>
<description>GP Registers Reset On Tamper Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNTSYNC</name>
<description>Count Read Synchronization Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>MODE0 Control B</description>
<addressOffset>0x2</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>GP0EN</name>
<description>General Purpose 0 Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP2EN</name>
<description>General Purpose 2 Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBMAJ</name>
<description>Debouncer Majority Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBASYNC</name>
<description>Debouncer Asynchronous Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTCOUT</name>
<description>RTC Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAEN</name>
<description>DMA Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBF</name>
<description>Debounce Freqnuency</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>DEBFSelect</name>
<enumeratedValue>
<name>DIV2</name>
<description>CLK_RTC_DEB = CLK_RTC/2</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>CLK_RTC_DEB = CLK_RTC/4</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>CLK_RTC_DEB = CLK_RTC/8</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>CLK_RTC_DEB = CLK_RTC/16</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>CLK_RTC_DEB = CLK_RTC/32</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>CLK_RTC_DEB = CLK_RTC/64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>CLK_RTC_DEB = CLK_RTC/128</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>CLK_RTC_DEB = CLK_RTC/256</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACTF</name>
<description>Active Layer Freqnuency</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>ACTFSelect</name>
<enumeratedValue>
<name>DIV2</name>
<description>CLK_RTC_OUT = CLK_RTC/2</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>CLK_RTC_OUT = CLK_RTC/4</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>CLK_RTC_OUT = CLK_RTC/8</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>CLK_RTC_OUT = CLK_RTC/16</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>CLK_RTC_OUT = CLK_RTC/32</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>CLK_RTC_OUT = CLK_RTC/64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>CLK_RTC_OUT = CLK_RTC/128</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>CLK_RTC_OUT = CLK_RTC/256</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>MODE0 Event Control</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PEREO0</name>
<description>Periodic Interval 0 Event Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO1</name>
<description>Periodic Interval 1 Event Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO2</name>
<description>Periodic Interval 2 Event Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO3</name>
<description>Periodic Interval 3 Event Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO4</name>
<description>Periodic Interval 4 Event Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO5</name>
<description>Periodic Interval 5 Event Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO6</name>
<description>Periodic Interval 6 Event Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO7</name>
<description>Periodic Interval 7 Event Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPEO0</name>
<description>Compare 0 Event Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPEO1</name>
<description>Compare 1 Event Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPEREO</name>
<description>Tamper Event Output Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVFEO</name>
<description>Overflow Event Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPEVEI</name>
<description>Tamper Event Input Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>MODE0 Interrupt Enable Clear</description>
<addressOffset>0x8</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5 Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6 Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7 Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP0</name>
<description>Compare 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPER</name>
<description>Tamper Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>MODE0 Interrupt Enable Set</description>
<addressOffset>0xA</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5 Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6 Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7 Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP0</name>
<description>Compare 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPER</name>
<description>Tamper Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>MODE0 Interrupt Flag Status and Clear</description>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP0</name>
<description>Compare 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPER</name>
<description>Tamper</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0xE</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGRUN</name>
<description>Run During Debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>MODE0 Synchronization Busy Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable Bit Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FREQCORR</name>
<description>FREQCORR Register Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNT</name>
<description>COUNT Register Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP0</name>
<description>COMP 0 Register Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP1</name>
<description>COMP 1 Register Busy</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNTSYNC</name>
<description>Count Synchronization Enable Bit Busy</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP0</name>
<description>General Purpose 0 Register Busy</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP1</name>
<description>General Purpose 1 Register Busy</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP2</name>
<description>General Purpose 2 Register Busy</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP3</name>
<description>General Purpose 3 Register Busy</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FREQCORR</name>
<description>Frequency Correction</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>VALUE</name>
<description>Correction Value</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>SIGN</name>
<description>Correction Sign</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT</name>
<description>MODE0 Counter Value</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<name>COMP[%s]</name>
<description>MODE0 Compare n Value</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COMP</name>
<description>Compare Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<name>GP[%s]</name>
<description>General Purpose</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GP</name>
<description>General Purpose</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>TAMPCTRL</name>
<description>Tamper Control</description>
<addressOffset>0x60</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IN0ACT</name>
<description>Tamper Input 0 Action</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN0ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN0 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IN1ACT</name>
<description>Tamper Input 1 Action</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN1ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN1 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IN2ACT</name>
<description>Tamper Input 2 Action</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN2ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN2 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IN3ACT</name>
<description>Tamper Input 3 Action</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN3ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN3 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IN4ACT</name>
<description>Tamper Input 4 Action</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN4ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN4 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TAMLVL0</name>
<description>Tamper Level Select 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMLVL1</name>
<description>Tamper Level Select 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMLVL2</name>
<description>Tamper Level Select 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMLVL3</name>
<description>Tamper Level Select 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMLVL4</name>
<description>Tamper Level Select 4</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC0</name>
<description>Debouncer Enable 0</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC1</name>
<description>Debouncer Enable 1</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC2</name>
<description>Debouncer Enable 2</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC3</name>
<description>Debouncer Enable 3</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC4</name>
<description>Debouncer Enable 4</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMESTAMP</name>
<description>MODE0 Timestamp</description>
<addressOffset>0x64</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>Count Timestamp Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>TAMPID</name>
<description>Tamper ID</description>
<addressOffset>0x68</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TAMPID0</name>
<description>Tamper Input 0 Detected</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPID1</name>
<description>Tamper Input 1 Detected</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPID2</name>
<description>Tamper Input 2 Detected</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPID3</name>
<description>Tamper Input 3 Detected</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPID4</name>
<description>Tamper Input 4 Detected</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPEVT</name>
<description>Tamper Event Detected</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>4</dimIncrement>
<name>BKUP[%s]</name>
<description>Backup</description>
<addressOffset>0x80</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKUP</name>
<description>Backup</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</cluster>
<cluster>
<name>MODE1</name>
<description>16-bit Counter with Two 16-bit Compares</description>
<alternateCluster>MODE0</alternateCluster>
<headerStructName>RtcMode1</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>MODE1 Control A</description>
<addressOffset>0x0</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>COUNT32</name>
<description>Mode 0: 32-bit Counter</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT16</name>
<description>Mode 1: 16-bit Counter</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLOCK</name>
<description>Mode 2: Clock/Calendar</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>CLK_RTC_CNT = GCLK_RTC/1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1</name>
<description>CLK_RTC_CNT = GCLK_RTC/1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>CLK_RTC_CNT = GCLK_RTC/2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>CLK_RTC_CNT = GCLK_RTC/4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>CLK_RTC_CNT = GCLK_RTC/8</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>CLK_RTC_CNT = GCLK_RTC/16</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>CLK_RTC_CNT = GCLK_RTC/32</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>CLK_RTC_CNT = GCLK_RTC/64</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>CLK_RTC_CNT = GCLK_RTC/128</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>CLK_RTC_CNT = GCLK_RTC/256</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV512</name>
<description>CLK_RTC_CNT = GCLK_RTC/512</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>CLK_RTC_CNT = GCLK_RTC/1024</description>
<value>0xB</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BKTRST</name>
<description>BKUP Registers Reset On Tamper Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPTRST</name>
<description>GP Registers Reset On Tamper Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNTSYNC</name>
<description>Count Read Synchronization Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>MODE1 Control B</description>
<addressOffset>0x2</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>GP0EN</name>
<description>General Purpose 0 Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP2EN</name>
<description>General Purpose 2 Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBMAJ</name>
<description>Debouncer Majority Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBASYNC</name>
<description>Debouncer Asynchronous Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTCOUT</name>
<description>RTC Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAEN</name>
<description>DMA Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBF</name>
<description>Debounce Freqnuency</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>DEBFSelect</name>
<enumeratedValue>
<name>DIV2</name>
<description>CLK_RTC_DEB = CLK_RTC/2</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>CLK_RTC_DEB = CLK_RTC/4</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>CLK_RTC_DEB = CLK_RTC/8</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>CLK_RTC_DEB = CLK_RTC/16</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>CLK_RTC_DEB = CLK_RTC/32</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>CLK_RTC_DEB = CLK_RTC/64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>CLK_RTC_DEB = CLK_RTC/128</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>CLK_RTC_DEB = CLK_RTC/256</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACTF</name>
<description>Active Layer Freqnuency</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>ACTFSelect</name>
<enumeratedValue>
<name>DIV2</name>
<description>CLK_RTC_OUT = CLK_RTC/2</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>CLK_RTC_OUT = CLK_RTC/4</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>CLK_RTC_OUT = CLK_RTC/8</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>CLK_RTC_OUT = CLK_RTC/16</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>CLK_RTC_OUT = CLK_RTC/32</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>CLK_RTC_OUT = CLK_RTC/64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>CLK_RTC_OUT = CLK_RTC/128</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>CLK_RTC_OUT = CLK_RTC/256</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>MODE1 Event Control</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PEREO0</name>
<description>Periodic Interval 0 Event Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO1</name>
<description>Periodic Interval 1 Event Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO2</name>
<description>Periodic Interval 2 Event Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO3</name>
<description>Periodic Interval 3 Event Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO4</name>
<description>Periodic Interval 4 Event Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO5</name>
<description>Periodic Interval 5 Event Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO6</name>
<description>Periodic Interval 6 Event Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO7</name>
<description>Periodic Interval 7 Event Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPEO0</name>
<description>Compare 0 Event Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPEO1</name>
<description>Compare 1 Event Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPEO2</name>
<description>Compare 2 Event Output Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPEO3</name>
<description>Compare 3 Event Output Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPEREO</name>
<description>Tamper Event Output Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVFEO</name>
<description>Overflow Event Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPEVEI</name>
<description>Tamper Event Input Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>MODE1 Interrupt Enable Clear</description>
<addressOffset>0x8</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5 Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6 Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7 Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP0</name>
<description>Compare 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Compare 2 Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Compare 3 Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPER</name>
<description>Tamper Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>MODE1 Interrupt Enable Set</description>
<addressOffset>0xA</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5 Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6 Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7 Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP0</name>
<description>Compare 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Compare 2 Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Compare 3 Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPER</name>
<description>Tamper Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>MODE1 Interrupt Flag Status and Clear</description>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP0</name>
<description>Compare 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Compare 2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Compare 3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPER</name>
<description>Tamper</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0xE</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGRUN</name>
<description>Run During Debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>MODE1 Synchronization Busy Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Bit Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable Bit Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FREQCORR</name>
<description>FREQCORR Register Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNT</name>
<description>COUNT Register Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>PER Register Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP0</name>
<description>COMP 0 Register Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP1</name>
<description>COMP 1 Register Busy</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP2</name>
<description>COMP 2 Register Busy</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP3</name>
<description>COMP 3 Register Busy</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNTSYNC</name>
<description>Count Synchronization Enable Bit Busy</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP0</name>
<description>General Purpose 0 Register Busy</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP1</name>
<description>General Purpose 1 Register Busy</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP2</name>
<description>General Purpose 2 Register Busy</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP3</name>
<description>General Purpose 3 Register Busy</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FREQCORR</name>
<description>Frequency Correction</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>VALUE</name>
<description>Correction Value</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>SIGN</name>
<description>Correction Sign</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT</name>
<description>MODE1 Counter Value</description>
<addressOffset>0x18</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>PER</name>
<description>MODE1 Counter Period</description>
<addressOffset>0x1C</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PER</name>
<description>Counter Period</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>2</dimIncrement>
<name>COMP[%s]</name>
<description>MODE1 Compare n Value</description>
<addressOffset>0x20</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>COMP</name>
<description>Compare Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<name>GP[%s]</name>
<description>General Purpose</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GP</name>
<description>General Purpose</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>TAMPCTRL</name>
<description>Tamper Control</description>
<addressOffset>0x60</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IN0ACT</name>
<description>Tamper Input 0 Action</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN0ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN0 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IN1ACT</name>
<description>Tamper Input 1 Action</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN1ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN1 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IN2ACT</name>
<description>Tamper Input 2 Action</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN2ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN2 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IN3ACT</name>
<description>Tamper Input 3 Action</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN3ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN3 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IN4ACT</name>
<description>Tamper Input 4 Action</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN4ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN4 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TAMLVL0</name>
<description>Tamper Level Select 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMLVL1</name>
<description>Tamper Level Select 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMLVL2</name>
<description>Tamper Level Select 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMLVL3</name>
<description>Tamper Level Select 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMLVL4</name>
<description>Tamper Level Select 4</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC0</name>
<description>Debouncer Enable 0</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC1</name>
<description>Debouncer Enable 1</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC2</name>
<description>Debouncer Enable 2</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC3</name>
<description>Debouncer Enable 3</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC4</name>
<description>Debouncer Enable 4</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMESTAMP</name>
<description>MODE1 Timestamp</description>
<addressOffset>0x64</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>Count Timestamp Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>TAMPID</name>
<description>Tamper ID</description>
<addressOffset>0x68</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TAMPID0</name>
<description>Tamper Input 0 Detected</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPID1</name>
<description>Tamper Input 1 Detected</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPID2</name>
<description>Tamper Input 2 Detected</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPID3</name>
<description>Tamper Input 3 Detected</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPID4</name>
<description>Tamper Input 4 Detected</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPEVT</name>
<description>Tamper Event Detected</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>4</dimIncrement>
<name>BKUP[%s]</name>
<description>Backup</description>
<addressOffset>0x80</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKUP</name>
<description>Backup</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</cluster>
<cluster>
<name>MODE2</name>
<description>Clock/Calendar with Alarm</description>
<alternateCluster>MODE0</alternateCluster>
<headerStructName>RtcMode2</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>MODE2 Control A</description>
<addressOffset>0x0</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>COUNT32</name>
<description>Mode 0: 32-bit Counter</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT16</name>
<description>Mode 1: 16-bit Counter</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLOCK</name>
<description>Mode 2: Clock/Calendar</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKREP</name>
<description>Clock Representation</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MATCHCLR</name>
<description>Clear on Match</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>CLK_RTC_CNT = GCLK_RTC/1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1</name>
<description>CLK_RTC_CNT = GCLK_RTC/1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>CLK_RTC_CNT = GCLK_RTC/2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>CLK_RTC_CNT = GCLK_RTC/4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>CLK_RTC_CNT = GCLK_RTC/8</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>CLK_RTC_CNT = GCLK_RTC/16</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>CLK_RTC_CNT = GCLK_RTC/32</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>CLK_RTC_CNT = GCLK_RTC/64</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>CLK_RTC_CNT = GCLK_RTC/128</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>CLK_RTC_CNT = GCLK_RTC/256</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV512</name>
<description>CLK_RTC_CNT = GCLK_RTC/512</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>CLK_RTC_CNT = GCLK_RTC/1024</description>
<value>0xB</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BKTRST</name>
<description>BKUP Registers Reset On Tamper Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GPTRST</name>
<description>GP Registers Reset On Tamper Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLOCKSYNC</name>
<description>Clock Read Synchronization Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>MODE2 Control B</description>
<addressOffset>0x2</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>GP0EN</name>
<description>General Purpose 0 Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP2EN</name>
<description>General Purpose 2 Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBMAJ</name>
<description>Debouncer Majority Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBASYNC</name>
<description>Debouncer Asynchronous Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTCOUT</name>
<description>RTC Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAEN</name>
<description>DMA Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBF</name>
<description>Debounce Freqnuency</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>DEBFSelect</name>
<enumeratedValue>
<name>DIV2</name>
<description>CLK_RTC_DEB = CLK_RTC/2</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>CLK_RTC_DEB = CLK_RTC/4</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>CLK_RTC_DEB = CLK_RTC/8</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>CLK_RTC_DEB = CLK_RTC/16</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>CLK_RTC_DEB = CLK_RTC/32</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>CLK_RTC_DEB = CLK_RTC/64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>CLK_RTC_DEB = CLK_RTC/128</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>CLK_RTC_DEB = CLK_RTC/256</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACTF</name>
<description>Active Layer Freqnuency</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>ACTFSelect</name>
<enumeratedValue>
<name>DIV2</name>
<description>CLK_RTC_OUT = CLK_RTC/2</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>CLK_RTC_OUT = CLK_RTC/4</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>CLK_RTC_OUT = CLK_RTC/8</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>CLK_RTC_OUT = CLK_RTC/16</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>CLK_RTC_OUT = CLK_RTC/32</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>CLK_RTC_OUT = CLK_RTC/64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>CLK_RTC_OUT = CLK_RTC/128</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>CLK_RTC_OUT = CLK_RTC/256</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>MODE2 Event Control</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>PEREO0</name>
<description>Periodic Interval 0 Event Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO1</name>
<description>Periodic Interval 1 Event Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO2</name>
<description>Periodic Interval 2 Event Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO3</name>
<description>Periodic Interval 3 Event Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO4</name>
<description>Periodic Interval 4 Event Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO5</name>
<description>Periodic Interval 5 Event Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO6</name>
<description>Periodic Interval 6 Event Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO7</name>
<description>Periodic Interval 7 Event Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARMEO0</name>
<description>Alarm 0 Event Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARMEO1</name>
<description>Alarm 1 Event Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPEREO</name>
<description>Tamper Event Output Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVFEO</name>
<description>Overflow Event Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPEVEI</name>
<description>Tamper Event Input Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>MODE2 Interrupt Enable Clear</description>
<addressOffset>0x8</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5 Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6 Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7 Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARM0</name>
<description>Alarm 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARM1</name>
<description>Alarm 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPER</name>
<description>Tamper Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>MODE2 Interrupt Enable Set</description>
<addressOffset>0xA</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0 Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1 Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2 Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3 Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4 Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5 Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6 Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7 Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARM0</name>
<description>Alarm 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARM1</name>
<description>Alarm 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPER</name>
<description>Tamper Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>MODE2 Interrupt Flag Status and Clear</description>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARM0</name>
<description>Alarm 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARM1</name>
<description>Alarm 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPER</name>
<description>Tamper</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0xE</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGRUN</name>
<description>Run During Debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>MODE2 Synchronization Busy Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Bit Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable Bit Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FREQCORR</name>
<description>FREQCORR Register Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLOCK</name>
<description>CLOCK Register Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARM0</name>
<description>ALARM 0 Register Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARM1</name>
<description>ALARM 1 Register Busy</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MASK0</name>
<description>MASK 0 Register Busy</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MASK1</name>
<description>MASK 1 Register Busy</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLOCKSYNC</name>
<description>Clock Synchronization Enable Bit Busy</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP0</name>
<description>General Purpose 0 Register Busy</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP1</name>
<description>General Purpose 1 Register Busy</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP2</name>
<description>General Purpose 2 Register Busy</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GP3</name>
<description>General Purpose 3 Register Busy</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FREQCORR</name>
<description>Frequency Correction</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>VALUE</name>
<description>Correction Value</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>SIGN</name>
<description>Correction Sign</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CLOCK</name>
<description>MODE2 Clock Value</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SECOND</name>
<description>Second</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>MINUTE</name>
<description>Minute</description>
<bitOffset>6</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>HOUR</name>
<description>Hour</description>
<bitOffset>12</bitOffset>
<bitWidth>5</bitWidth>
<enumeratedValues>
<name>HOURSelect</name>
<enumeratedValue>
<name>AM</name>
<description>AM when CLKREP in 12-hour</description>
<value>0x00</value>
</enumeratedValue>
<enumeratedValue>
<name>PM</name>
<description>PM when CLKREP in 12-hour</description>
<value>0x10</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DAY</name>
<description>Day</description>
<bitOffset>17</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>MONTH</name>
<description>Month</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>YEAR</name>
<description>Year</description>
<bitOffset>26</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<name>GP[%s]</name>
<description>General Purpose</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GP</name>
<description>General Purpose</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>ALARM0</name>
<description>MODE2_ALARM Alarm n Value</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SECOND</name>
<description>Second</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>MINUTE</name>
<description>Minute</description>
<bitOffset>6</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>HOUR</name>
<description>Hour</description>
<bitOffset>12</bitOffset>
<bitWidth>5</bitWidth>
<enumeratedValues>
<name>HOURSelect</name>
<enumeratedValue>
<name>AM</name>
<description>Morning hour</description>
<value>0x00</value>
</enumeratedValue>
<enumeratedValue>
<name>PM</name>
<description>Afternoon hour</description>
<value>0x10</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DAY</name>
<description>Day</description>
<bitOffset>17</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>MONTH</name>
<description>Month</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>YEAR</name>
<description>Year</description>
<bitOffset>26</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>MASK0</name>
<description>MODE2_ALARM Alarm n Mask</description>
<addressOffset>0x24</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SEL</name>
<description>Alarm Mask Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SELSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Alarm Disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SS</name>
<description>Match seconds only</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MMSS</name>
<description>Match seconds and minutes only</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>HHMMSS</name>
<description>Match seconds, minutes, and hours only</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DDHHMMSS</name>
<description>Match seconds, minutes, hours, and days only</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MMDDHHMMSS</name>
<description>Match seconds, minutes, hours, days, and months only</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>YYMMDDHHMMSS</name>
<description>Match seconds, minutes, hours, days, months, and years</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>ALARM1</name>
<description>MODE2_ALARM Alarm n Value</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SECOND</name>
<description>Second</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>MINUTE</name>
<description>Minute</description>
<bitOffset>6</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>HOUR</name>
<description>Hour</description>
<bitOffset>12</bitOffset>
<bitWidth>5</bitWidth>
<enumeratedValues>
<name>HOURSelect</name>
<enumeratedValue>
<name>AM</name>
<description>Morning hour</description>
<value>0x00</value>
</enumeratedValue>
<enumeratedValue>
<name>PM</name>
<description>Afternoon hour</description>
<value>0x10</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DAY</name>
<description>Day</description>
<bitOffset>17</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>MONTH</name>
<description>Month</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>YEAR</name>
<description>Year</description>
<bitOffset>26</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>MASK1</name>
<description>MODE2_ALARM Alarm n Mask</description>
<addressOffset>0x2C</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SEL</name>
<description>Alarm Mask Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SELSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Alarm Disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SS</name>
<description>Match seconds only</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MMSS</name>
<description>Match seconds and minutes only</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>HHMMSS</name>
<description>Match seconds, minutes, and hours only</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DDHHMMSS</name>
<description>Match seconds, minutes, hours, and days only</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MMDDHHMMSS</name>
<description>Match seconds, minutes, hours, days, and months only</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>YYMMDDHHMMSS</name>
<description>Match seconds, minutes, hours, days, months, and years</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>TAMPCTRL</name>
<description>Tamper Control</description>
<addressOffset>0x60</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>IN0ACT</name>
<description>Tamper Input 0 Action</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN0ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN0 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IN1ACT</name>
<description>Tamper Input 1 Action</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN1ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN1 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IN2ACT</name>
<description>Tamper Input 2 Action</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN2ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN2 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IN3ACT</name>
<description>Tamper Input 3 Action</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN3ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN3 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>IN4ACT</name>
<description>Tamper Input 4 Action</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IN4ACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Off (Disabled)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKE</name>
<description>Wake without timestamp</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTURE</name>
<description>Capture timestamp</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTL</name>
<description>Compare IN4 to OUT</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TAMLVL0</name>
<description>Tamper Level Select 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMLVL1</name>
<description>Tamper Level Select 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMLVL2</name>
<description>Tamper Level Select 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMLVL3</name>
<description>Tamper Level Select 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMLVL4</name>
<description>Tamper Level Select 4</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC0</name>
<description>Debouncer Enable 0</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC1</name>
<description>Debouncer Enable 1</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC2</name>
<description>Debouncer Enable 2</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC3</name>
<description>Debouncer Enable 3</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBNC4</name>
<description>Debouncer Enable 4</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>TIMESTAMP</name>
<description>MODE2 Timestamp</description>
<addressOffset>0x64</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SECOND</name>
<description>Second Timestamp Value</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>MINUTE</name>
<description>Minute Timestamp Value</description>
<bitOffset>6</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>HOUR</name>
<description>Hour Timestamp Value</description>
<bitOffset>12</bitOffset>
<bitWidth>5</bitWidth>
<enumeratedValues>
<name>HOURSelect</name>
<enumeratedValue>
<name>AM</name>
<description>AM when CLKREP in 12-hour</description>
<value>0x00</value>
</enumeratedValue>
<enumeratedValue>
<name>PM</name>
<description>PM when CLKREP in 12-hour</description>
<value>0x10</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DAY</name>
<description>Day Timestamp Value</description>
<bitOffset>17</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>MONTH</name>
<description>Month Timestamp Value</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>YEAR</name>
<description>Year Timestamp Value</description>
<bitOffset>26</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>TAMPID</name>
<description>Tamper ID</description>
<addressOffset>0x68</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TAMPID0</name>
<description>Tamper Input 0 Detected</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPID1</name>
<description>Tamper Input 1 Detected</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPID2</name>
<description>Tamper Input 2 Detected</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPID3</name>
<description>Tamper Input 3 Detected</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPID4</name>
<description>Tamper Input 4 Detected</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TAMPEVT</name>
<description>Tamper Event Detected</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>4</dimIncrement>
<name>BKUP[%s]</name>
<description>Backup</description>
<addressOffset>0x80</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKUP</name>
<description>Backup</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</cluster>
</registers>
</peripheral>
<peripheral>
<name>SDHC0</name>
<version>U20111.8.3</version>
<description>SD/MMC Host Controller</description>
<groupName>SDHC</groupName>
<prependToName>SDHC_</prependToName>
<baseAddress>0x45000000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x235</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SDHC0</name>
<value>135</value>
</interrupt>
<registers>
<register>
<name>SSAR</name>
<description>SDMA System Address / Argument 2</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<description>SDMA System Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>SSAR_CMD23_MODE</name>
<description>SDMA System Address / Argument 2</description>
<alternateRegister>SSAR</alternateRegister>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ARG2</name>
<description>Argument 2</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>BSR</name>
<description>Block Size</description>
<addressOffset>0x4</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BLOCKSIZE</name>
<description>Transfer Block Size</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>BOUNDARY</name>
<description>SDMA Buffer Boundary</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>BOUNDARYSelect</name>
<enumeratedValue>
<name>4K</name>
<description>4k bytes</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>8K</name>
<description>8k bytes</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>16K</name>
<description>16k bytes</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>32K</name>
<description>32k bytes</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>64K</name>
<description>64k bytes</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>128K</name>
<description>128k bytes</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>256K</name>
<description>256k bytes</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>512K</name>
<description>512k bytes</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BCR</name>
<description>Block Count</description>
<addressOffset>0x6</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BCNT</name>
<description>Blocks Count for Current Transfer</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>ARG1R</name>
<description>Argument 1</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ARG</name>
<description>Argument 1</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>TMR</name>
<description>Transfer Mode</description>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>DMAEN</name>
<description>DMA Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DMAENSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>No data transfer or Non DMA data transfer</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>DMA data transfer</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BCEN</name>
<description>Block Count Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BCENSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Disable</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>Enable</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMDEN</name>
<description>Auto Command Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>ACMDENSelect</name>
<enumeratedValue>
<name>DISABLED</name>
<description>Auto Command Disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CMD12</name>
<description>Auto CMD12 Enable</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CMD23</name>
<description>Auto CMD23 Enable</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DTDSEL</name>
<description>Data Transfer Direction Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DTDSELSelect</name>
<enumeratedValue>
<name>WRITE</name>
<description>Write (Host to Card)</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>READ</name>
<description>Read (Card to Host)</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MSBSEL</name>
<description>Multi/Single Block Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>MSBSELSelect</name>
<enumeratedValue>
<name>SINGLE</name>
<description>Single Block</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>MULTIPLE</name>
<description>Multiple Block</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CR</name>
<description>Command</description>
<addressOffset>0xE</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>RESPTYP</name>
<description>Response Type</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>RESPTYPSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No response</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>136_BIT</name>
<description>136-bit response</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>48_BIT</name>
<description>48-bit response</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>48_BIT_BUSY</name>
<description>48-bit response check busy after response</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDCCEN</name>
<description>Command CRC Check Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCCENSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Disable</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>Enable</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDICEN</name>
<description>Command Index Check Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDICENSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Disable</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>Enable</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DPSEL</name>
<description>Data Present Select</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DPSELSelect</name>
<enumeratedValue>
<name>NO_DATA</name>
<description>No Data Present</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA</name>
<description>Data Present</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDTYP</name>
<description>Command Type</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CMDTYPSelect</name>
<enumeratedValue>
<name>NORMAL</name>
<description>Other commands</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>SUSPEND</name>
<description>CMD52 for writing Bus Suspend in CCCR</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESUME</name>
<description>CMD52 for writing Function Select in CCCR</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>ABORT</name>
<description>CMD12, CMD52 for writing I/O Abort in CCCR</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDIDX</name>
<description>Command Index</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<name>RR[%s]</name>
<description>Response</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CMDRESP</name>
<description>Command Response</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>BDPR</name>
<description>Buffer Data Port</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BUFDATA</name>
<description>Buffer Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>PSR</name>
<description>Present State</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00F80000</resetValue>
<fields>
<field>
<name>CMDINHC</name>
<description>Command Inhibit (CMD)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDINHCSelect</name>
<enumeratedValue>
<name>CAN</name>
<description>Can issue command using only CMD line</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CANNOT</name>
<description>Cannot issue command</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDINHD</name>
<description>Command Inhibit (DAT)</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDINHDSelect</name>
<enumeratedValue>
<name>CAN</name>
<description>Can issue command which uses the DAT line</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CANNOT</name>
<description>Cannot issue command which uses the DAT line</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DLACT</name>
<description>DAT Line Active</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DLACTSelect</name>
<enumeratedValue>
<name>INACTIVE</name>
<description>DAT Line Inactive</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ACTIVE</name>
<description>DAT Line Active</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RTREQ</name>
<description>Re-Tuning Request</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>RTREQSelect</name>
<enumeratedValue>
<name>OK</name>
<description>Fixed or well-tuned sampling clock</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>REQUIRED</name>
<description>Sampling clock needs re-tuning</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WTACT</name>
<description>Write Transfer Active</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>WTACTSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No valid data</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Transferring data</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RTACT</name>
<description>Read Transfer Active</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>RTACTSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No valid data</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Transferring data</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BUFWREN</name>
<description>Buffer Write Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BUFWRENSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Write disable</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>Write enable</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BUFRDEN</name>
<description>Buffer Read Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BUFRDENSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Read disable</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>Read enable</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CARDINS</name>
<description>Card Inserted</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CARDINSSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Reset or Debouncing or No Card</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Card inserted</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CARDSS</name>
<description>Card State Stable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CARDSSSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Reset or Debouncing</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>No Card or Insered</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CARDDPL</name>
<description>Card Detect Pin Level</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CARDDPLSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No card present (SDCD#=1)</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Card present (SDCD#=0)</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WRPPL</name>
<description>Write Protect Pin Level</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>WRPPLSelect</name>
<enumeratedValue>
<name>PROTECTED</name>
<description>Write protected (SDWP#=0)</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Write enabled (SDWP#=1)</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATLL</name>
<description>DAT[3:0] Line Level</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CMDLL</name>
<description>CMD Line Level</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HC1R</name>
<description>Host Control 1</description>
<addressOffset>0x28</addressOffset>
<size>8</size>
<resetValue>0xE00</resetValue>
<fields>
<field>
<name>LEDCTRL</name>
<description>LED Control</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>LEDCTRLSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>LED off</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ON</name>
<description>LED on</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DW</name>
<description>Data Width</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DWSelect</name>
<enumeratedValue>
<name>1BIT</name>
<description>1-bit mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>4BIT</name>
<description>4-bit mode</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HSEN</name>
<description>High Speed Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>HSENSelect</name>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal Speed mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High Speed mode</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DMASEL</name>
<description>DMA Select</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DMASELSelect</name>
<enumeratedValue>
<name>SDMA</name>
<description>SDMA is selected</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>32BIT</name>
<description>32-bit Address ADMA2 is selected</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CARDDTL</name>
<description>Card Detect Test Level</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CARDDTLSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Card</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Card Inserted</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CARDDSEL</name>
<description>Card Detect Signal Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CARDDSELSelect</name>
<enumeratedValue>
<name>NORMAL</name>
<description>SDCD# is selected (for normal use)</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>TEST</name>
<description>The Card Select Test Level is selected (for test purpose)</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>HC1R_EMMC_MODE</name>
<description>Host Control 1</description>
<alternateRegister>HC1R</alternateRegister>
<addressOffset>0x28</addressOffset>
<size>8</size>
<resetValue>0xE00</resetValue>
<fields>
<field>
<name>DW</name>
<description>Data Width</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DWSelect</name>
<enumeratedValue>
<name>1BIT</name>
<description>1-bit mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>4BIT</name>
<description>4-bit mode</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HSEN</name>
<description>High Speed Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>HSENSelect</name>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal Speed mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High Speed mode</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DMASEL</name>
<description>DMA Select</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DMASELSelect</name>
<enumeratedValue>
<name>SDMA</name>
<description>SDMA is selected</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>32BIT</name>
<description>32-bit Address ADMA2 is selected</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>PCR</name>
<description>Power Control</description>
<addressOffset>0x29</addressOffset>
<size>8</size>
<resetValue>0x0E</resetValue>
<fields>
<field>
<name>SDBPWR</name>
<description>SD Bus Power</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SDBPWRSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Power off</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ON</name>
<description>Power on</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SDBVSEL</name>
<description>SD Bus Voltage Select</description>
<bitOffset>1</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SDBVSELSelect</name>
<enumeratedValue>
<name>1V8</name>
<description>1.8V (Typ.)</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>3V0</name>
<description>3.0V (Typ.)</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>3V3</name>
<description>3.3V (Typ.)</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BGCR</name>
<description>Block Gap Control</description>
<addressOffset>0x2A</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>STPBGR</name>
<description>Stop at Block Gap Request</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>STPBGRSelect</name>
<enumeratedValue>
<name>TRANSFER</name>
<description>Transfer</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Stop</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CONTR</name>
<description>Continue Request</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CONTRSelect</name>
<enumeratedValue>
<name>GO_ON</name>
<description>Not affected</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RESTART</name>
<description>Restart</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RWCTRL</name>
<description>Read Wait Control</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>RWCTRLSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Disable Read Wait Control</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>Enable Read Wait Control</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>INTBG</name>
<description>Interrupt at Block Gap</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>INTBGSelect</name>
<enumeratedValue>
<name>DISABLED</name>
<description>Disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BGCR_EMMC_MODE</name>
<description>Block Gap Control</description>
<alternateRegister>BGCR</alternateRegister>
<addressOffset>0x2A</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>STPBGR</name>
<description>Stop at Block Gap Request</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>STPBGRSelect</name>
<enumeratedValue>
<name>TRANSFER</name>
<description>Transfer</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Stop</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CONTR</name>
<description>Continue Request</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CONTRSelect</name>
<enumeratedValue>
<name>GO_ON</name>
<description>Not affected</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RESTART</name>
<description>Restart</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WCR</name>
<description>Wakeup Control</description>
<addressOffset>0x2B</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>WKENCINT</name>
<description>Wakeup Event Enable on Card Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>WKENCINTSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Disable</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>Enable</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKENCINS</name>
<description>Wakeup Event Enable on Card Insertion</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>WKENCINSSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Disable</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>Enable</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WKENCREM</name>
<description>Wakeup Event Enable on Card Removal</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>WKENCREMSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Disable</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>Enable</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CCR</name>
<description>Clock Control</description>
<addressOffset>0x2C</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>INTCLKEN</name>
<description>Internal Clock Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>INTCLKENSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Stop</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ON</name>
<description>Oscillate</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>INTCLKS</name>
<description>Internal Clock Stable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>INTCLKSSelect</name>
<enumeratedValue>
<name>NOT_READY</name>
<description>Not Ready</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>READY</name>
<description>Ready</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SDCLKEN</name>
<description>SD Clock Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SDCLKENSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Disable</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>Enable</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKGSEL</name>
<description>Clock Generator Select</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CLKGSELSelect</name>
<enumeratedValue>
<name>DIV</name>
<description>Divided Clock Mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PROG</name>
<description>Programmable Clock Mode</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>USDCLKFSEL</name>
<description>Upper Bits of SDCLK Frequency Select</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SDCLKFSEL</name>
<description>SDCLK Frequency Select</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>Timeout Control</description>
<addressOffset>0x2E</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DTCVAL</name>
<description>Data Timeout Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>SRR</name>
<description>Software Reset</description>
<addressOffset>0x2F</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRSTALL</name>
<description>Software Reset For All</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SWRSTALLSelect</name>
<enumeratedValue>
<name>WORK</name>
<description>Work</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RESET</name>
<description>Reset</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SWRSTCMD</name>
<description>Software Reset For CMD Line</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SWRSTCMDSelect</name>
<enumeratedValue>
<name>WORK</name>
<description>Work</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RESET</name>
<description>Reset</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SWRSTDAT</name>
<description>Software Reset For DAT Line</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SWRSTDATSelect</name>
<enumeratedValue>
<name>WORK</name>
<description>Work</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RESET</name>
<description>Reset</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>NISTR</name>
<description>Normal Interrupt Status</description>
<addressOffset>0x30</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMDC</name>
<description>Command Complete</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No command complete</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Command complete</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRFC</name>
<description>Transfer Complete</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>TRFCSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Not complete</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Command execution is completed</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BLKGE</name>
<description>Block Gap Event</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BLKGESelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Block Gap Event</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Transaction stopped at block gap</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DMAINT</name>
<description>DMA Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DMAINTSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No DMA Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>DMA Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BWRRDY</name>
<description>Buffer Write Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BWRRDYSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Not ready to write buffer</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Ready to write buffer</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BRDRDY</name>
<description>Buffer Read Ready</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BRDRDYSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Not ready to read buffer</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Ready to read buffer</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CINS</name>
<description>Card Insertion</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CINSSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Card state stable or Debouncing</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Card inserted</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CREM</name>
<description>Card Removal</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CREMSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Card state stable or Debouncing</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Card Removed</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CINT</name>
<description>Card Interrupt</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CINTSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Card Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Generate Card Interrupt</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ERRINT</name>
<description>Error Interrupt</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ERRINTSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>NISTR_EMMC_MODE</name>
<description>Normal Interrupt Status</description>
<alternateRegister>NISTR</alternateRegister>
<addressOffset>0x30</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMDC</name>
<description>Command Complete</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No command complete</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Command complete</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRFC</name>
<description>Transfer Complete</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>TRFCSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Not complete</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Command execution is completed</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BLKGE</name>
<description>Block Gap Event</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BLKGESelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Block Gap Event</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Transaction stopped at block gap</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DMAINT</name>
<description>DMA Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DMAINTSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No DMA Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>DMA Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BWRRDY</name>
<description>Buffer Write Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BWRRDYSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Not ready to write buffer</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Ready to write buffer</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BRDRDY</name>
<description>Buffer Read Ready</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BRDRDYSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Not ready to read buffer</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Ready to read buffer</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BOOTAR</name>
<description>Boot Acknowledge Received</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERRINT</name>
<description>Error Interrupt</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ERRINTSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EISTR</name>
<description>Error Interrupt Status</description>
<addressOffset>0x32</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMDTEO</name>
<description>Command Timeout Error</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDTEOSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Timeout</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDCRC</name>
<description>Command CRC Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCRCSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>CRC Error Generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDEND</name>
<description>Command End Bit Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDENDSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>End Bit Error Generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDIDX</name>
<description>Command Index Error</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDIDXSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATTEO</name>
<description>Data Timeout Error</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATTEOSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Timeout</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATCRC</name>
<description>Data CRC Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATCRCSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATEND</name>
<description>Data End Bit Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATENDSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CURLIM</name>
<description>Current Limit Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CURLIMSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Power Fail</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMD</name>
<description>Auto CMD Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ADMA</name>
<description>ADMA Error</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ADMASelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EISTR_EMMC_MODE</name>
<description>Error Interrupt Status</description>
<alternateRegister>EISTR</alternateRegister>
<addressOffset>0x32</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMDTEO</name>
<description>Command Timeout Error</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDTEOSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Timeout</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDCRC</name>
<description>Command CRC Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCRCSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>CRC Error Generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDEND</name>
<description>Command End Bit Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDENDSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>End Bit Error Generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDIDX</name>
<description>Command Index Error</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDIDXSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATTEO</name>
<description>Data Timeout Error</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATTEOSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Timeout</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATCRC</name>
<description>Data CRC Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATCRCSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATEND</name>
<description>Data End Bit Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATENDSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CURLIM</name>
<description>Current Limit Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CURLIMSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Power Fail</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMD</name>
<description>Auto CMD Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ADMA</name>
<description>ADMA Error</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ADMASelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BOOTAE</name>
<description>Boot Acknowledge Error</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BOOTAESelect</name>
<enumeratedValue>
<name>0</name>
<description>FIFO contains at least one byte</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>FIFO is empty</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>NISTER</name>
<description>Normal Interrupt Status Enable</description>
<addressOffset>0x34</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMDC</name>
<description>Command Complete Status Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRFC</name>
<description>Transfer Complete Status Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>TRFCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BLKGE</name>
<description>Block Gap Event Status Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BLKGESelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DMAINT</name>
<description>DMA Interrupt Status Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DMAINTSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BWRRDY</name>
<description>Buffer Write Ready Status Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BWRRDYSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BRDRDY</name>
<description>Buffer Read Ready Status Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BRDRDYSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CINS</name>
<description>Card Insertion Status Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CINSSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CREM</name>
<description>Card Removal Status Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CREMSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CINT</name>
<description>Card Interrupt Status Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CINTSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>NISTER_EMMC_MODE</name>
<description>Normal Interrupt Status Enable</description>
<alternateRegister>NISTER</alternateRegister>
<addressOffset>0x34</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMDC</name>
<description>Command Complete Status Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRFC</name>
<description>Transfer Complete Status Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>TRFCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BLKGE</name>
<description>Block Gap Event Status Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BLKGESelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DMAINT</name>
<description>DMA Interrupt Status Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DMAINTSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BWRRDY</name>
<description>Buffer Write Ready Status Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BWRRDYSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BRDRDY</name>
<description>Buffer Read Ready Status Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BRDRDYSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BOOTAR</name>
<description>Boot Acknowledge Received Status Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EISTER</name>
<description>Error Interrupt Status Enable</description>
<addressOffset>0x36</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMDTEO</name>
<description>Command Timeout Error Status Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDTEOSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDCRC</name>
<description>Command CRC Error Status Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCRCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDEND</name>
<description>Command End Bit Error Status Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDENDSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDIDX</name>
<description>Command Index Error Status Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDIDXSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATTEO</name>
<description>Data Timeout Error Status Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATTEOSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATCRC</name>
<description>Data CRC Error Status Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATCRCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATEND</name>
<description>Data End Bit Error Status Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATENDSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CURLIM</name>
<description>Current Limit Error Status Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CURLIMSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMD</name>
<description>Auto CMD Error Status Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ADMA</name>
<description>ADMA Error Status Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ADMASelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EISTER_EMMC_MODE</name>
<description>Error Interrupt Status Enable</description>
<alternateRegister>EISTER</alternateRegister>
<addressOffset>0x36</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMDTEO</name>
<description>Command Timeout Error Status Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDTEOSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDCRC</name>
<description>Command CRC Error Status Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCRCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDEND</name>
<description>Command End Bit Error Status Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDENDSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDIDX</name>
<description>Command Index Error Status Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDIDXSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATTEO</name>
<description>Data Timeout Error Status Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATTEOSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATCRC</name>
<description>Data CRC Error Status Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATCRCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATEND</name>
<description>Data End Bit Error Status Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATENDSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CURLIM</name>
<description>Current Limit Error Status Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CURLIMSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMD</name>
<description>Auto CMD Error Status Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ADMA</name>
<description>ADMA Error Status Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ADMASelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BOOTAE</name>
<description>Boot Acknowledge Error Status Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>NISIER</name>
<description>Normal Interrupt Signal Enable</description>
<addressOffset>0x38</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMDC</name>
<description>Command Complete Signal Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRFC</name>
<description>Transfer Complete Signal Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>TRFCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BLKGE</name>
<description>Block Gap Event Signal Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BLKGESelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DMAINT</name>
<description>DMA Interrupt Signal Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DMAINTSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BWRRDY</name>
<description>Buffer Write Ready Signal Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BWRRDYSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BRDRDY</name>
<description>Buffer Read Ready Signal Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BRDRDYSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CINS</name>
<description>Card Insertion Signal Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CINSSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CREM</name>
<description>Card Removal Signal Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CREMSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CINT</name>
<description>Card Interrupt Signal Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CINTSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>NISIER_EMMC_MODE</name>
<description>Normal Interrupt Signal Enable</description>
<alternateRegister>NISIER</alternateRegister>
<addressOffset>0x38</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMDC</name>
<description>Command Complete Signal Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRFC</name>
<description>Transfer Complete Signal Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>TRFCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BLKGE</name>
<description>Block Gap Event Signal Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BLKGESelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DMAINT</name>
<description>DMA Interrupt Signal Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DMAINTSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BWRRDY</name>
<description>Buffer Write Ready Signal Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BWRRDYSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BRDRDY</name>
<description>Buffer Read Ready Signal Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BRDRDYSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BOOTAR</name>
<description>Boot Acknowledge Received Signal Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EISIER</name>
<description>Error Interrupt Signal Enable</description>
<addressOffset>0x3A</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMDTEO</name>
<description>Command Timeout Error Signal Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDTEOSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDCRC</name>
<description>Command CRC Error Signal Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCRCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDEND</name>
<description>Command End Bit Error Signal Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDENDSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDIDX</name>
<description>Command Index Error Signal Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDIDXSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATTEO</name>
<description>Data Timeout Error Signal Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATTEOSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATCRC</name>
<description>Data CRC Error Signal Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATCRCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATEND</name>
<description>Data End Bit Error Signal Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATENDSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CURLIM</name>
<description>Current Limit Error Signal Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CURLIMSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMD</name>
<description>Auto CMD Error Signal Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ADMA</name>
<description>ADMA Error Signal Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ADMASelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EISIER_EMMC_MODE</name>
<description>Error Interrupt Signal Enable</description>
<alternateRegister>EISIER</alternateRegister>
<addressOffset>0x3A</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMDTEO</name>
<description>Command Timeout Error Signal Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDTEOSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDCRC</name>
<description>Command CRC Error Signal Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCRCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDEND</name>
<description>Command End Bit Error Signal Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDENDSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDIDX</name>
<description>Command Index Error Signal Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDIDXSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATTEO</name>
<description>Data Timeout Error Signal Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATTEOSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATCRC</name>
<description>Data CRC Error Signal Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATCRCSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATEND</name>
<description>Data End Bit Error Signal Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATENDSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CURLIM</name>
<description>Current Limit Error Signal Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CURLIMSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMD</name>
<description>Auto CMD Error Signal Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDSelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ADMA</name>
<description>ADMA Error Signal Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ADMASelect</name>
<enumeratedValue>
<name>MASKED</name>
<description>Masked</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BOOTAE</name>
<description>Boot Acknowledge Error Signal Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ACESR</name>
<description>Auto CMD Error Status</description>
<addressOffset>0x3C</addressOffset>
<size>16</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>ACMD12NE</name>
<description>Auto CMD12 Not Executed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMD12NESelect</name>
<enumeratedValue>
<name>EXEC</name>
<description>Executed</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>NOT_EXEC</name>
<description>Not executed</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMDTEO</name>
<description>Auto CMD Timeout Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDTEOSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Timeout</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMDCRC</name>
<description>Auto CMD CRC Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDCRCSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>CRC Error Generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMDEND</name>
<description>Auto CMD End Bit Error</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDENDSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>End Bit Error Generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMDIDX</name>
<description>Auto CMD Index Error</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDIDXSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDNI</name>
<description>Command not Issued By Auto CMD12 Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDNISelect</name>
<enumeratedValue>
<name>OK</name>
<description>No error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>NOT_ISSUED</name>
<description>Not Issued</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>HC2R</name>
<description>Host Control 2</description>
<addressOffset>0x3E</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>UHSMS</name>
<description>UHS Mode Select</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>UHSMSSelect</name>
<enumeratedValue>
<name>SDR12</name>
<description>SDR12</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>SDR25</name>
<description>SDR25</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>SDR50</name>
<description>SDR50</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>SDR104</name>
<description>SDR104</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>DDR50</name>
<description>DDR50</description>
<value>4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>VS18EN</name>
<description>1.8V Signaling Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>VS18ENSelect</name>
<enumeratedValue>
<name>S33V</name>
<description>3.3V Signaling</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>S18V</name>
<description>1.8V Signaling</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DRVSEL</name>
<description>Driver Strength Select</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DRVSELSelect</name>
<enumeratedValue>
<name>B</name>
<description>Driver Type B is Selected (Default)</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>A</name>
<description>Driver Type A is Selected</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>C</name>
<description>Driver Type C is Selected</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>D</name>
<description>Driver Type D is Selected</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EXTUN</name>
<description>Execute Tuning</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>EXTUNSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Not Tuned or Tuning Completed</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>REQUESTED</name>
<description>Execute Tuning</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SLCKSEL</name>
<description>Sampling Clock Select</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SLCKSELSelect</name>
<enumeratedValue>
<name>FIXED</name>
<description>Fixed clock is used to sample data</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>TUNED</name>
<description>Tuned clock is used to sample data</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASINTEN</name>
<description>Asynchronous Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ASINTENSelect</name>
<enumeratedValue>
<name>DISABLED</name>
<description>Disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLED</name>
<description>Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PVALEN</name>
<description>Preset Value Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>PVALENSelect</name>
<enumeratedValue>
<name>HOST</name>
<description>SDCLK and Driver Strength are controlled by Host Controller</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>AUTO</name>
<description>Automatic Selection by Preset Value is Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>HC2R_EMMC_MODE</name>
<description>Host Control 2</description>
<alternateRegister>HC2R</alternateRegister>
<addressOffset>0x3E</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>HS200EN</name>
<description>HS200 Mode Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>HS200ENSelect</name>
<enumeratedValue>
<name>SDR12</name>
<description>SDR12</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>SDR25</name>
<description>SDR25</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>SDR50</name>
<description>SDR50</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>SDR104</name>
<description>SDR104</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>DDR50</name>
<description>DDR50</description>
<value>4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DRVSEL</name>
<description>Driver Strength Select</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DRVSELSelect</name>
<enumeratedValue>
<name>B</name>
<description>Driver Type B is Selected (Default)</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>A</name>
<description>Driver Type A is Selected</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>C</name>
<description>Driver Type C is Selected</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>D</name>
<description>Driver Type D is Selected</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EXTUN</name>
<description>Execute Tuning</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>EXTUNSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Not Tuned or Tuning Completed</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>REQUESTED</name>
<description>Execute Tuning</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SLCKSEL</name>
<description>Sampling Clock Select</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SLCKSELSelect</name>
<enumeratedValue>
<name>FIXED</name>
<description>Fixed clock is used to sample data</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>TUNED</name>
<description>Tuned clock is used to sample data</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PVALEN</name>
<description>Preset Value Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>PVALENSelect</name>
<enumeratedValue>
<name>HOST</name>
<description>SDCLK and Driver Strength are controlled by Host Controller</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>AUTO</name>
<description>Automatic Selection by Preset Value is Enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CA0R</name>
<description>Capabilities 0</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x27E80080</resetValue>
<fields>
<field>
<name>TEOCLKF</name>
<description>Timeout Clock Frequency</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
<enumeratedValues>
<name>TEOCLKFSelect</name>
<enumeratedValue>
<name>OTHER</name>
<description>Get information via another method</description>
<value>0</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TEOCLKU</name>
<description>Timeout Clock Unit</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>TEOCLKUSelect</name>
<enumeratedValue>
<name>KHZ</name>
<description>KHz</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>MHZ</name>
<description>MHz</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BASECLKF</name>
<description>Base Clock Frequency</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>BASECLKFSelect</name>
<enumeratedValue>
<name>OTHER</name>
<description>Get information via another method</description>
<value>0</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MAXBLKL</name>
<description>Max Block Length</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MAXBLKLSelect</name>
<enumeratedValue>
<name>512</name>
<description>512 bytes</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>1024 bytes</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>2048</name>
<description>2048 bytes</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ED8SUP</name>
<description>8-bit Support for Embedded Device</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ED8SUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>8-bit Bus Width not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>8-bit Bus Width Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ADMA2SUP</name>
<description>ADMA2 Support</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ADMA2SUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>ADMA2 not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>ADMA2 Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HSSUP</name>
<description>High Speed Support</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>HSSUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>High Speed not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>High Speed Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SDMASUP</name>
<description>SDMA Support</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SDMASUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>SDMA not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>SDMA Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SRSUP</name>
<description>Suspend/Resume Support</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SRSUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Suspend/Resume not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Suspend/Resume Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>V33VSUP</name>
<description>Voltage Support 3.3V</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>V33VSUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>3.3V Not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>3.3V Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>V30VSUP</name>
<description>Voltage Support 3.0V</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>V30VSUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>3.0V Not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>3.0V Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>V18VSUP</name>
<description>Voltage Support 1.8V</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>V18VSUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>1.8V Not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>1.8V Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SB64SUP</name>
<description>64-Bit System Bus Support</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SB64SUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>32-bit Address Descriptors and System Bus</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>64-bit Address Descriptors and System Bus</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ASINTSUP</name>
<description>Asynchronous Interrupt Support</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ASINTSUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Asynchronous Interrupt not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Asynchronous Interrupt supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SLTYPE</name>
<description>Slot Type</description>
<bitOffset>30</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SLTYPESelect</name>
<enumeratedValue>
<name>REMOVABLE</name>
<description>Removable Card Slot</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>EMBEDDED</name>
<description>Embedded Slot for One Device</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CA1R</name>
<description>Capabilities 1</description>
<addressOffset>0x44</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000070</resetValue>
<fields>
<field>
<name>SDR50SUP</name>
<description>SDR50 Support</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SDR50SUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>SDR50 is Not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>SDR50 is Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SDR104SUP</name>
<description>SDR104 Support</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SDR104SUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>SDR104 is Not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>SDR104 is Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DDR50SUP</name>
<description>DDR50 Support</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DDR50SUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>DDR50 is Not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>DDR50 is Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DRVASUP</name>
<description>Driver Type A Support</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DRVASUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Driver Type A is Not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Driver Type A is Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DRVCSUP</name>
<description>Driver Type C Support</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DRVCSUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Driver Type C is Not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Driver Type C is Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DRVDSUP</name>
<description>Driver Type D Support</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DRVDSUPSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Driver Type D is Not Supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Driver Type D is Supported</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCNTRT</name>
<description>Timer Count for Re-Tuning</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>TCNTRTSelect</name>
<enumeratedValue>
<name>DISABLED</name>
<description>Re-Tuning Timer disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>1S</name>
<description>1 second</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>2S</name>
<description>2 seconds</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>4S</name>
<description>4 seconds</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>8S</name>
<description>8 seconds</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>16S</name>
<description>16 seconds</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>32S</name>
<description>32 seconds</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>64S</name>
<description>64 seconds</description>
<value>7</value>
</enumeratedValue>
<enumeratedValue>
<name>128S</name>
<description>128 seconds</description>
<value>8</value>
</enumeratedValue>
<enumeratedValue>
<name>256S</name>
<description>256 seconds</description>
<value>9</value>
</enumeratedValue>
<enumeratedValue>
<name>512S</name>
<description>512 seconds</description>
<value>10</value>
</enumeratedValue>
<enumeratedValue>
<name>1024S</name>
<description>1024 seconds</description>
<value>11</value>
</enumeratedValue>
<enumeratedValue>
<name>OTHER</name>
<description>Get information from other source</description>
<value>15</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TSDR50</name>
<description>Use Tuning for SDR50</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>TSDR50Select</name>
<enumeratedValue>
<name>NO</name>
<description>SDR50 does not require tuning</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>SDR50 requires tuning</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKMULT</name>
<description>Clock Multiplier</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>CLKMULTSelect</name>
<enumeratedValue>
<name>NO</name>
<description>Clock Multiplier is Not Supported</description>
<value>0</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>MCCAR</name>
<description>Maximum Current Capabilities</description>
<addressOffset>0x48</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>MAXCUR33V</name>
<description>Maximum Current for 3.3V</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>MAXCUR33VSelect</name>
<enumeratedValue>
<name>OTHER</name>
<description>Get information via another method</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>4MA</name>
<description>4mA</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>8MA</name>
<description>8mA</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>12MA</name>
<description>12mA</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MAXCUR30V</name>
<description>Maximum Current for 3.0V</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>MAXCUR30VSelect</name>
<enumeratedValue>
<name>OTHER</name>
<description>Get information via another method</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>4MA</name>
<description>4mA</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>8MA</name>
<description>8mA</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>12MA</name>
<description>12mA</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MAXCUR18V</name>
<description>Maximum Current for 1.8V</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>MAXCUR18VSelect</name>
<enumeratedValue>
<name>OTHER</name>
<description>Get information via another method</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>4MA</name>
<description>4mA</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>8MA</name>
<description>8mA</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>12MA</name>
<description>12mA</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>FERACES</name>
<description>Force Event for Auto CMD Error Status</description>
<addressOffset>0x50</addressOffset>
<size>16</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>ACMD12NE</name>
<description>Force Event for Auto CMD12 Not Executed</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMD12NESelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMDTEO</name>
<description>Force Event for Auto CMD Timeout Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDTEOSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMDCRC</name>
<description>Force Event for Auto CMD CRC Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDCRCSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMDEND</name>
<description>Force Event for Auto CMD End Bit Error</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDENDSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMDIDX</name>
<description>Force Event for Auto CMD Index Error</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDIDXSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDNI</name>
<description>Force Event for Command Not Issued By Auto CMD12 Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDNISelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>FEREIS</name>
<description>Force Event for Error Interrupt Status</description>
<addressOffset>0x52</addressOffset>
<size>16</size>
<access>write-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CMDTEO</name>
<description>Force Event for Command Timeout Error</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDTEOSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDCRC</name>
<description>Force Event for Command CRC Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDCRCSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDEND</name>
<description>Force Event for Command End Bit Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDENDSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDIDX</name>
<description>Force Event for Command Index Error</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMDIDXSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATTEO</name>
<description>Force Event for Data Timeout Error</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATTEOSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATCRC</name>
<description>Force Event for Data CRC Error</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATCRCSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DATEND</name>
<description>Force Event for Data End Bit Error</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATENDSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CURLIM</name>
<description>Force Event for Current Limit Error</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CURLIMSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ACMD</name>
<description>Force Event for Auto CMD Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ACMDSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ADMA</name>
<description>Force Event for ADMA Error</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ADMASelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BOOTAE</name>
<description>Force Event for Boot Acknowledge Error</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>BOOTAESelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Interrupt</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Interrupt is generated</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>AESR</name>
<description>ADMA Error Status</description>
<addressOffset>0x54</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ERRST</name>
<description>ADMA Error State</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>ERRSTSelect</name>
<enumeratedValue>
<name>STOP</name>
<description>ST_STOP (Stop DMA)</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>FDS</name>
<description>ST_FDS (Fetch Descriptor)</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>TFR</name>
<description>ST_TFR (Transfer Data)</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LMIS</name>
<description>ADMA Length Mismatch Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>LMISSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No Error</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>YES</name>
<description>Error</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>1</dim>
<dimIncrement>4</dimIncrement>
<name>ASAR[%s]</name>
<description>ADMA System Address n</description>
<addressOffset>0x58</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADMASA</name>
<description>ADMA System Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>2</dimIncrement>
<name>PVR[%s]</name>
<description>Preset Value n</description>
<addressOffset>0x60</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>SDCLKFSEL</name>
<description>SDCLK Frequency Select Value for Initialization</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>CLKGSEL</name>
<description>Clock Generator Select Value for Initialization</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CLKGSELSelect</name>
<enumeratedValue>
<name>DIV</name>
<description>Host Controller Ver2.00 Compatible Clock Generator (Divider)</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PROG</name>
<description>Programmable Clock Generator</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DRVSEL</name>
<description>Driver Strength Select Value for Initialization</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DRVSELSelect</name>
<enumeratedValue>
<name>B</name>
<description>Driver Type B is Selected</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>A</name>
<description>Driver Type A is Selected</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>C</name>
<description>Driver Type C is Selected</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>D</name>
<description>Driver Type D is Selected</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SISR</name>
<description>Slot Interrupt Status</description>
<addressOffset>0xFC</addressOffset>
<size>16</size>
<access>read-only</access>
<resetValue>0x20000</resetValue>
<fields>
<field>
<name>INTSSL</name>
<description>Interrupt Signal for Each Slot</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HCVR</name>
<description>Host Controller Version</description>
<addressOffset>0xFE</addressOffset>
<size>16</size>
<access>read-only</access>
<resetValue>0x1802</resetValue>
<fields>
<field>
<name>SVER</name>
<description>Spec Version</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>VVER</name>
<description>Vendor Version</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>MC1R</name>
<description>MMC Control 1</description>
<addressOffset>0x204</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>CMDTYP</name>
<description>e.MMC Command Type</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CMDTYPSelect</name>
<enumeratedValue>
<name>NORMAL</name>
<description>Not a MMC specific command</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAITIRQ</name>
<description>Wait IRQ Command</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>STREAM</name>
<description>Stream Command</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOOT</name>
<description>Boot Command</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DDR</name>
<description>e.MMC HSDDR Mode</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPD</name>
<description>e.MMC Open Drain Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOOTA</name>
<description>e.MMC Boot Acknowledge Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTN</name>
<description>e.MMC Reset Signal</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FCD</name>
<description>e.MMC Force Card Detect</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MC2R</name>
<description>MMC Control 2</description>
<addressOffset>0x205</addressOffset>
<size>8</size>
<access>write-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SRESP</name>
<description>e.MMC Abort Wait IRQ</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ABOOT</name>
<description>e.MMC Abort Boot</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ACR</name>
<description>AHB Control</description>
<addressOffset>0x208</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BMAX</name>
<description>AHB Maximum Burst</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>BMAXSelect</name>
<enumeratedValue>
<name>INCR16</name>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>INCR8</name>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>INCR4</name>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>SINGLE</name>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CC2R</name>
<description>Clock Control 2</description>
<addressOffset>0x20C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>FSDCLKD</name>
<description>Force SDCK Disabled</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>FSDCLKDSelect</name>
<enumeratedValue>
<name>NOEFFECT</name>
<description>No effect</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DISABLE</name>
<description>SDCLK can be stopped at any time after DATA transfer.SDCLK enable forcing for 8 SDCLK cycles is disabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CACR</name>
<description>Capabilities Control</description>
<addressOffset>0x230</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CAPWREN</name>
<description>Capabilities Registers Write Enable (Required to write the correct frequencies in the Capabilities Registers)</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>KEY</name>
<description>Key (0x46)</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGR</name>
<description>Debug</description>
<addressOffset>0x234</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>NIDBG</name>
<description>Non-intrusive debug enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>NIDBGSelect</name>
<enumeratedValue>
<name>IDBG</name>
<description>Debugging is intrusive (reads of BDPR from debugger are considered and increment the internal buffer pointer)</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>NIDBG</name>
<description>Debugging is not intrusive (reads of BDPR from debugger are discarded and do not increment the internal buffer pointer)</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SERCOM0</name>
<version>U22015.0.0</version>
<description>Serial Communication Interface</description>
<groupName>SERCOM</groupName>
<prependToName>SERCOM_</prependToName>
<baseAddress>0x40003000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x31</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SERCOM0_0</name>
<value>46</value>
</interrupt>
<interrupt>
<name>SERCOM0_1</name>
<value>47</value>
</interrupt>
<interrupt>
<name>SERCOM0_2</name>
<value>48</value>
</interrupt>
<interrupt>
<name>SERCOM0_OTHER</name>
<value>49</value>
</interrupt>
<registers>
<cluster>
<name>I2CM</name>
<description>I2C Master Mode</description>
<headerStructName>SercomI2cm</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>I2CM Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>USART_EXT_CLK</name>
<description>USART with external clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_INT_CLK</name>
<description>USART with internal clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI in slave operation</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI in master operation</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>I2C_SLAVE</name>
<description>I2C slave operation</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>I2C_MASTER</name>
<description>I2C master operation</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINOUT</name>
<description>Pin Usage</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDAHOLD</name>
<description>SDA Hold Time</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SDAHOLDSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>75NS</name>
<description>50-100ns hold time</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>450NS</name>
<description>300-600ns hold time</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>600NS</name>
<description>400-800ns hold time</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MEXTTOEN</name>
<description>Master SCL Low Extend Timeout</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEXTTOEN</name>
<description>Slave SCL Low Extend Timeout</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPEED</name>
<description>Transfer Speed</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SPEEDSelect</name>
<enumeratedValue>
<name>STANDARD_AND_FAST_MODE</name>
<description>Standard Mode(Sm) Upto 100kHz and Fast Mode(Fm) Upto 400kHz </description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FASTPLUS_MODE</name>
<description>Fast-mode Plus Upto 1MHz</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH_SPEED_MODE</name>
<description>High-speed mode Upto 3.4MHz</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SCLSM</name>
<description>SCL Clock Stretch Mode</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INACTOUT</name>
<description>Inactive Time-Out</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>INACTOUTSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>55US</name>
<description>5-6 SCL Time-Out(50-60us)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>105US</name>
<description>10-11 SCL Time-Out(100-110us)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>205US</name>
<description>20-21 SCL Time-Out(200-210us)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LOWTOUTEN</name>
<description>SCL Low Timeout Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>I2CM Control B</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SMEN</name>
<description>Smart Mode Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QCEN</name>
<description>Quick Command Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ACKACT</name>
<description>Acknowledge Action</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLC</name>
<description>I2CM Control C</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA32B</name>
<description>Data 32 Bit</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATA32BSelect</name>
<enumeratedValue>
<name>DATA_TRANS_8BIT</name>
<description>Data transaction from/to DATA register are 8-bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA_TRANS_32BIT</name>
<description>Data transaction from/to DATA register are 32-bit</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BAUD</name>
<description>I2CM Baud Rate</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BAUDLOW</name>
<description>Baud Rate Value Low</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>HSBAUD</name>
<description>High Speed Baud Rate Value</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>HSBAUDLOW</name>
<description>High Speed Baud Rate Value Low</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>I2CM Interrupt Enable Clear</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>MB</name>
<description>Master On Bus Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SB</name>
<description>Slave On Bus Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>I2CM Interrupt Enable Set</description>
<addressOffset>0x16</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>MB</name>
<description>Master On Bus Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SB</name>
<description>Slave On Bus Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>I2CM Interrupt Flag Status and Clear</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>MB</name>
<description>Master On Bus Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SB</name>
<description>Slave On Bus Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>I2CM Status</description>
<addressOffset>0x1A</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BUSERR</name>
<description>Bus Error</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARBLOST</name>
<description>Arbitration Lost</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXNACK</name>
<description>Received Not Acknowledge</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSSTATE</name>
<description>Bus State</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>LOWTOUT</name>
<description>SCL Low Timeout</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLKHOLD</name>
<description>Clock Hold</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MEXTTOUT</name>
<description>Master SCL Low Extend Timeout</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEXTTOUT</name>
<description>Slave SCL Low Extend Timeout</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LENERR</name>
<description>Length Error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>I2CM Synchronization Busy</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>SERCOM Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYSOP</name>
<description>System Operation Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LENGTH</name>
<description>Length Synchronization Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ADDR</name>
<description>I2CM Address</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<description>Address Value</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>LENEN</name>
<description>Length Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HS</name>
<description>High Speed Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TENBITEN</name>
<description>Ten Bit Addressing Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LEN</name>
<description>Length</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>I2CM Data</description>
<addressOffset>0x28</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>I2CM Debug Control</description>
<addressOffset>0x30</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGSTOP</name>
<description>Debug Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster>
<cluster>
<name>I2CS</name>
<description>I2C Slave Mode</description>
<alternateCluster>I2CM</alternateCluster>
<headerStructName>SercomI2cs</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>I2CS Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>USART_EXT_CLK</name>
<description>USART with external clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_INT_CLK</name>
<description>USART with internal clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI in slave operation</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI in master operation</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>I2C_SLAVE</name>
<description>I2C slave operation</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>I2C_MASTER</name>
<description>I2C master operation</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINOUT</name>
<description>Pin Usage</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDAHOLD</name>
<description>SDA Hold Time</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SDAHOLDSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>75NS</name>
<description>50-100ns hold time</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>450NS</name>
<description>300-600ns hold time</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>600NS</name>
<description>400-800ns hold time</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SEXTTOEN</name>
<description>Slave SCL Low Extend Timeout</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPEED</name>
<description>Transfer Speed</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SPEEDSelect</name>
<enumeratedValue>
<name>STANDARD_AND_FAST_MODE</name>
<description>Standard Mode(Sm) Upto 100kHz and Fast Mode(Fm) Upto 400kHz </description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FASTPLUS_MODE</name>
<description>Fast-mode Plus Upto 1MHz</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH_SPEED_MODE</name>
<description>High-speed mode Upto 3.4MHz</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SCLSM</name>
<description>SCL Clock Stretch Mode</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LOWTOUTEN</name>
<description>SCL Low Timeout Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>I2CS Control B</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SMEN</name>
<description>Smart Mode Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GCMD</name>
<description>PMBus Group Command</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AACKEN</name>
<description>Automatic Address Acknowledge</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AMODE</name>
<description>Address Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ACKACT</name>
<description>Acknowledge Action</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLC</name>
<description>I2CS Control C</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SDASETUP</name>
<description>SDA Setup Time</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATA32B</name>
<description>Data 32 Bit</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATA32BSelect</name>
<enumeratedValue>
<name>DATA_TRANS_8BIT</name>
<description>Data transaction from/to DATA register are 8-bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA_TRANS_32BIT</name>
<description>Data transaction from/to DATA register are 32-bit</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>I2CS Interrupt Enable Clear</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>PREC</name>
<description>Stop Received Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AMATCH</name>
<description>Address Match Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRDY</name>
<description>Data Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>I2CS Interrupt Enable Set</description>
<addressOffset>0x16</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>PREC</name>
<description>Stop Received Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AMATCH</name>
<description>Address Match Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRDY</name>
<description>Data Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>I2CS Interrupt Flag Status and Clear</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>PREC</name>
<description>Stop Received Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AMATCH</name>
<description>Address Match Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRDY</name>
<description>Data Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>I2CS Status</description>
<addressOffset>0x1A</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BUSERR</name>
<description>Bus Error</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COLL</name>
<description>Transmit Collision</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXNACK</name>
<description>Received Not Acknowledge</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIR</name>
<description>Read/Write Direction</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SR</name>
<description>Repeated Start</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LOWTOUT</name>
<description>SCL Low Timeout</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLKHOLD</name>
<description>Clock Hold</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEXTTOUT</name>
<description>Slave SCL Low Extend Timeout</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HS</name>
<description>High Speed</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LENERR</name>
<description>Transaction Length Error</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>I2CS Synchronization Busy</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>SERCOM Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LENGTH</name>
<description>Length Synchronization Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>LENGTH</name>
<description>I2CS Length</description>
<addressOffset>0x22</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>LEN</name>
<description>Data Length</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LENEN</name>
<description>Data Length Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ADDR</name>
<description>I2CS Address</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GENCEN</name>
<description>General Call Address Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDR</name>
<description>Address Value</description>
<bitOffset>1</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>TENBITEN</name>
<description>Ten Bit Addressing Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDRMASK</name>
<description>Address Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>10</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>I2CS Data</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</cluster>
<cluster>
<name>SPIS</name>
<description>SPI Slave Mode</description>
<alternateCluster>I2CM</alternateCluster>
<headerStructName>SercomSpis</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>SPIS Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>USART_EXT_CLK</name>
<description>USART with external clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_INT_CLK</name>
<description>USART with internal clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI in slave operation</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI in master operation</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>I2C_SLAVE</name>
<description>I2C slave operation</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>I2C_MASTER</name>
<description>I2C master operation</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IBON</name>
<description>Immediate Buffer Overflow Notification</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DOPO</name>
<description>Data Out Pinout</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DOPOSelect</name>
<enumeratedValue>
<name>PAD0</name>
<description>DO on PAD[0], SCK on PAD[1] and SS on PAD[2]</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD2</name>
<description>DO on PAD[3], SCK on PAD[1] and SS on PAD[2]</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIPO</name>
<description>Data In Pinout</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DIPOSelect</name>
<enumeratedValue>
<name>PAD0</name>
<description>SERCOM PAD[0] is used as data input</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD1</name>
<description>SERCOM PAD[1] is used as data input</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD2</name>
<description>SERCOM PAD[2] is used as data input</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD3</name>
<description>SERCOM PAD[3] is used as data input</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FORM</name>
<description>Frame Format</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>FORMSelect</name>
<enumeratedValue>
<name>SPI_FRAME</name>
<description>SPI Frame</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_FRAME_WITH_ADDR</name>
<description>SPI Frame with Addr</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPHA</name>
<description>Clock Phase</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CPHASelect</name>
<enumeratedValue>
<name>LEADING_EDGE</name>
<description>The data is sampled on a leading SCK edge and changed on a trailing SCK edge</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TRAILING_EDGE</name>
<description>The data is sampled on a trailing SCK edge and changed on a leading SCK edge</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPOL</name>
<description>Clock Polarity</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CPOLSelect</name>
<enumeratedValue>
<name>IDLE_LOW</name>
<description>SCK is low when idle</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>IDLE_HIGH</name>
<description>SCK is high when idle</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DORD</name>
<description>Data Order</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DORDSelect</name>
<enumeratedValue>
<name>MSB</name>
<description>MSB is transferred first</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LSB</name>
<description>LSB is transferred first</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>SPIS Control B</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHSIZE</name>
<description>Character Size</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CHSIZESelect</name>
<enumeratedValue>
<name>8_BIT</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>9_BIT</name>
<description>9 bits</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PLOADEN</name>
<description>Data Preload Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSDE</name>
<description>Slave Select Low Detect Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSSEN</name>
<description>Master Slave Select Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AMODE</name>
<description>Address Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>AMODESelect</name>
<enumeratedValue>
<name>MASK</name>
<description>SPI Address mask </description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2_ADDRESSES</name>
<description>Two unique Addressess</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RANGE</name>
<description>Address Range</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLC</name>
<description>SPIS Control C</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ICSPACE</name>
<description>Inter-Character Spacing</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>DATA32B</name>
<description>Data 32 Bit</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATA32BSelect</name>
<enumeratedValue>
<name>DATA_TRANS_8BIT</name>
<description>Transaction from and to DATA register are 8-bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA_TRANS_32BIT</name>
<description>Transaction from and to DATA register are 32-bit</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BAUD</name>
<description>SPIS Baud Rate</description>
<addressOffset>0xC</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>SPIS Interrupt Enable Clear</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSL</name>
<description>Slave Select Low Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>SPIS Interrupt Enable Set</description>
<addressOffset>0x16</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSL</name>
<description>Slave Select Low Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>SPIS Interrupt Flag Status and Clear</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSL</name>
<description>Slave Select Low Interrupt Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>SPIS Status</description>
<addressOffset>0x1A</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BUFOVF</name>
<description>Buffer Overflow</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LENERR</name>
<description>Transaction Length Error</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>SPIS Synchronization Busy</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>SERCOM Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>CTRLB Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LENGTH</name>
<description>LENGTH Synchronization Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>LENGTH</name>
<description>SPIS Length</description>
<addressOffset>0x22</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>LEN</name>
<description>Data Length</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LENEN</name>
<description>Data Length Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ADDR</name>
<description>SPIS Address</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<description>Address Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>ADDRMASK</name>
<description>Address Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>SPIS Data</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>SPIS Debug Control</description>
<addressOffset>0x30</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGSTOP</name>
<description>Debug Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster>
<cluster>
<name>SPIM</name>
<description>SPI Master Mode</description>
<alternateCluster>I2CM</alternateCluster>
<headerStructName>SercomSpim</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>SPIM Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>USART_EXT_CLK</name>
<description>USART with external clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_INT_CLK</name>
<description>USART with internal clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI in slave operation</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI in master operation</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>I2C_SLAVE</name>
<description>I2C slave operation</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>I2C_MASTER</name>
<description>I2C master operation</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IBON</name>
<description>Immediate Buffer Overflow Notification</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DOPO</name>
<description>Data Out Pinout</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DOPOSelect</name>
<enumeratedValue>
<name>PAD0</name>
<description>DO on PAD[0], SCK on PAD[1] and SS on PAD[2]</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD2</name>
<description>DO on PAD[3], SCK on PAD[1] and SS on PAD[2]</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIPO</name>
<description>Data In Pinout</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DIPOSelect</name>
<enumeratedValue>
<name>PAD0</name>
<description>SERCOM PAD[0] is used as data input</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD1</name>
<description>SERCOM PAD[1] is used as data input</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD2</name>
<description>SERCOM PAD[2] is used as data input</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD3</name>
<description>SERCOM PAD[3] is used as data input</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FORM</name>
<description>Frame Format</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>FORMSelect</name>
<enumeratedValue>
<name>SPI_FRAME</name>
<description>SPI Frame</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_FRAME_WITH_ADDR</name>
<description>SPI Frame with Addr</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPHA</name>
<description>Clock Phase</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CPHASelect</name>
<enumeratedValue>
<name>LEADING_EDGE</name>
<description>The data is sampled on a leading SCK edge and changed on a trailing SCK edge</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TRAILING_EDGE</name>
<description>The data is sampled on a trailing SCK edge and changed on a leading SCK edge</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPOL</name>
<description>Clock Polarity</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CPOLSelect</name>
<enumeratedValue>
<name>IDLE_LOW</name>
<description>SCK is low when idle</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>IDLE_HIGH</name>
<description>SCK is high when idle</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DORD</name>
<description>Data Order</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DORDSelect</name>
<enumeratedValue>
<name>MSB</name>
<description>MSB is transferred first</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LSB</name>
<description>LSB is transferred first</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>SPIM Control B</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHSIZE</name>
<description>Character Size</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CHSIZESelect</name>
<enumeratedValue>
<name>8_BIT</name>
<description>8 bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>9_BIT</name>
<description>9 bits</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PLOADEN</name>
<description>Data Preload Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSDE</name>
<description>Slave Select Low Detect Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSSEN</name>
<description>Master Slave Select Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AMODE</name>
<description>Address Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>AMODESelect</name>
<enumeratedValue>
<name>MASK</name>
<description>SPI Address mask </description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2_ADDRESSES</name>
<description>Two unique Addressess</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RANGE</name>
<description>Address Range</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLC</name>
<description>SPIM Control C</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ICSPACE</name>
<description>Inter-Character Spacing</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>DATA32B</name>
<description>Data 32 Bit</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DATA32BSelect</name>
<enumeratedValue>
<name>DATA_TRANS_8BIT</name>
<description>Transaction from and to DATA register are 8-bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA_TRANS_32BIT</name>
<description>Transaction from and to DATA register are 32-bit</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BAUD</name>
<description>SPIM Baud Rate</description>
<addressOffset>0xC</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>SPIM Interrupt Enable Clear</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSL</name>
<description>Slave Select Low Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>SPIM Interrupt Enable Set</description>
<addressOffset>0x16</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSL</name>
<description>Slave Select Low Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>SPIM Interrupt Flag Status and Clear</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSL</name>
<description>Slave Select Low Interrupt Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>SPIM Status</description>
<addressOffset>0x1A</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BUFOVF</name>
<description>Buffer Overflow</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LENERR</name>
<description>Transaction Length Error</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>SPIM Synchronization Busy</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>SERCOM Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>CTRLB Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LENGTH</name>
<description>LENGTH Synchronization Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>LENGTH</name>
<description>SPIM Length</description>
<addressOffset>0x22</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>LEN</name>
<description>Data Length</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LENEN</name>
<description>Data Length Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ADDR</name>
<description>SPIM Address</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ADDR</name>
<description>Address Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>ADDRMASK</name>
<description>Address Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>SPIM Data</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>SPIM Debug Control</description>
<addressOffset>0x30</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGSTOP</name>
<description>Debug Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster>
<cluster>
<name>USART_EXT</name>
<description>USART EXTERNAL CLOCK Mode</description>
<alternateCluster>I2CM</alternateCluster>
<headerStructName>SercomUsart_ext</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>USART_EXT Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>USART_EXT_CLK</name>
<description>USART with external clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_INT_CLK</name>
<description>USART with internal clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI in slave operation</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI in master operation</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>I2C_SLAVE</name>
<description>I2C slave operation</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>I2C_MASTER</name>
<description>I2C master operation</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IBON</name>
<description>Immediate Buffer Overflow Notification</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXINV</name>
<description>Transmit Data Invert</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXINV</name>
<description>Receive Data Invert</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAMPR</name>
<description>Sample</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SAMPRSelect</name>
<enumeratedValue>
<name>16X_ARITHMETIC</name>
<description>16x over-sampling using arithmetic baudrate generation</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16X_FRACTIONAL</name>
<description>16x over-sampling using fractional baudrate generation</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>8X_ARITHMETIC</name>
<description>8x over-sampling using arithmetic baudrate generation</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8X_FRACTIONAL</name>
<description>8x over-sampling using fractional baudrate generation</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>3X_ARITHMETIC</name>
<description>3x over-sampling using arithmetic baudrate generation</description>
<value>0x4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TXPO</name>
<description>Transmit Data Pinout</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>TXPOSelect</name>
<enumeratedValue>
<name>PAD0</name>
<description>SERCOM PAD[0] is used for data transmission</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD3</name>
<description>SERCOM_PAD[0] is used for data transmission</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RXPO</name>
<description>Receive Data Pinout</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>RXPOSelect</name>
<enumeratedValue>
<name>PAD0</name>
<description>SERCOM PAD[0] is used for data reception</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD1</name>
<description>SERCOM PAD[1] is used for data reception</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD2</name>
<description>SERCOM PAD[2] is used for data reception</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD3</name>
<description>SERCOM PAD[3] is used for data reception</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SAMPA</name>
<description>Sample Adjustment</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FORM</name>
<description>Frame Format</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>FORMSelect</name>
<enumeratedValue>
<name>USART_FRAME_NO_PARITY</name>
<description>USART frame</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_FRAME_WITH_PARITY</name>
<description>USART frame with parity</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_FRAME_LIN_MASTER_MODE</name>
<description>LIN Master - Break and sync generation</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_FRAME_AUTO_BAUD_NO_PARITY</name>
<description>Auto-baud - break detection and auto-baud</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_FRAME_AUTO_BAUD_WITH_PARITY</name>
<description>Auto-baud - break detection and auto-baud with parity</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_FRAME_ISO_7816</name>
<description>ISO 7816</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMODE</name>
<description>Communication Mode</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMODESelect</name>
<enumeratedValue>
<name>ASYNC</name>
<description>Asynchronous Communication</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SYNC</name>
<description>Synchronous Communication</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPOL</name>
<description>Clock Polarity</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CPOLSelect</name>
<enumeratedValue>
<name>IDLE_LOW</name>
<description>TxD Change:- Rising XCK edge, RxD Sample:- Falling XCK edge</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>IDLE_HIGH</name>
<description>TxD Change:- Falling XCK edge, RxD Sample:- Rising XCK edge</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DORD</name>
<description>Data Order</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DORDSelect</name>
<enumeratedValue>
<name>MSB</name>
<description>MSB is transmitted first</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LSB</name>
<description>LSB is transmitted first</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>USART_EXT Control B</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHSIZE</name>
<description>Character Size</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CHSIZESelect</name>
<enumeratedValue>
<name>8_BIT</name>
<description>8 Bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>9_BIT</name>
<description>9 Bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>5_BIT</name>
<description>5 Bits</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>6_BIT</name>
<description>6 Bits</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>7_BIT</name>
<description>7 Bits</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SBMODE</name>
<description>Stop Bit Mode</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SBMODESelect</name>
<enumeratedValue>
<name>1_BIT</name>
<description>One Stop Bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2_BIT</name>
<description>Two Stop Bits</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>COLDEN</name>
<description>Collision Detection Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SFDE</name>
<description>Start of Frame Detection Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENC</name>
<description>Encoding Format</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PMODE</name>
<description>Parity Mode</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>PMODESelect</name>
<enumeratedValue>
<name>EVEN</name>
<description>Even Parity</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ODD</name>
<description>Odd Parity</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LINCMD</name>
<description>LIN Command</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLC</name>
<description>USART_EXT Control C</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GTIME</name>
<description>Guard Time</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>BRKLEN</name>
<description>LIN Master Break Length</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>HDRDLY</name>
<description>LIN Master Header Delay</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>INACK</name>
<description>Inhibit Not Acknowledge</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DSNACK</name>
<description>Disable Successive NACK</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MAXITER</name>
<description>Maximum Iterations</description>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DATA32B</name>
<description>Data 32 Bit</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DATA32BSelect</name>
<enumeratedValue>
<name>DATA_READ_WRITE_CHSIZE</name>
<description>Data reads and writes according CTRLB.CHSIZE</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA_READ_CHSIZE_WRITE_32BIT</name>
<description>Data reads according CTRLB.CHSIZE and writes according 32-bit extension</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA_READ_32BIT_WRITE_CHSIZE</name>
<description>Data reads according 32-bit extension and writes according CTRLB.CHSIZE</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA_READ_WRITE_32BIT</name>
<description>Data reads and writes according 32-bit extension</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BAUD</name>
<description>USART_EXT Baud Rate</description>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>BAUD_FRAC_MODE</name>
<description>USART_EXT Baud Rate</description>
<alternateRegister>BAUD</alternateRegister>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>13</bitWidth>
</field>
<field>
<name>FP</name>
<description>Fractional Part</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>BAUD_FRACFP_MODE</name>
<description>USART_EXT Baud Rate</description>
<alternateRegister>BAUD</alternateRegister>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>13</bitWidth>
</field>
<field>
<name>FP</name>
<description>Fractional Part</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>BAUD_USARTFP_MODE</name>
<description>USART_EXT Baud Rate</description>
<alternateRegister>BAUD</alternateRegister>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>RXPL</name>
<description>USART_EXT Receive Pulse Length</description>
<addressOffset>0xE</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>RXPL</name>
<description>Receive Pulse Length</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>USART_EXT Interrupt Enable Clear</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXS</name>
<description>Receive Start Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSIC</name>
<description>Clear To Send Input Change Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXBRK</name>
<description>Break Received Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>USART_EXT Interrupt Enable Set</description>
<addressOffset>0x16</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXS</name>
<description>Receive Start Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSIC</name>
<description>Clear To Send Input Change Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXBRK</name>
<description>Break Received Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>USART_EXT Interrupt Flag Status and Clear</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXS</name>
<description>Receive Start Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSIC</name>
<description>Clear To Send Input Change Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXBRK</name>
<description>Break Received Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>USART_EXT Status</description>
<addressOffset>0x1A</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PERR</name>
<description>Parity Error</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FERR</name>
<description>Frame Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUFOVF</name>
<description>Buffer Overflow</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTS</name>
<description>Clear To Send</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISF</name>
<description>Inconsistent Sync Field</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COLL</name>
<description>Collision Detected</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXE</name>
<description>Transmitter Empty</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ITER</name>
<description>Maximum Number of Repetitions Reached</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>USART_EXT Synchronization Busy</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>SERCOM Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>CTRLB Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXERRCNT</name>
<description>RXERRCNT Synchronization Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LENGTH</name>
<description>LENGTH Synchronization Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RXERRCNT</name>
<description>USART_EXT Receive Error Count</description>
<addressOffset>0x20</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
</register>
<register>
<name>LENGTH</name>
<description>USART_EXT Length</description>
<addressOffset>0x22</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>LEN</name>
<description>Data Length</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LENEN</name>
<description>Data Length Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>USART_EXT Data</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>USART_EXT Debug Control</description>
<addressOffset>0x30</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGSTOP</name>
<description>Debug Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster>
<cluster>
<name>USART_INT</name>
<description>USART INTERNAL CLOCK Mode</description>
<alternateCluster>I2CM</alternateCluster>
<headerStructName>SercomUsart_int</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>USART_INT Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>USART_EXT_CLK</name>
<description>USART with external clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_INT_CLK</name>
<description>USART with internal clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_SLAVE</name>
<description>SPI in slave operation</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SPI_MASTER</name>
<description>SPI in master operation</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>I2C_SLAVE</name>
<description>I2C slave operation</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>I2C_MASTER</name>
<description>I2C master operation</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IBON</name>
<description>Immediate Buffer Overflow Notification</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXINV</name>
<description>Transmit Data Invert</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXINV</name>
<description>Receive Data Invert</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAMPR</name>
<description>Sample</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SAMPRSelect</name>
<enumeratedValue>
<name>16X_ARITHMETIC</name>
<description>16x over-sampling using arithmetic baudrate generation</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16X_FRACTIONAL</name>
<description>16x over-sampling using fractional baudrate generation</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>8X_ARITHMETIC</name>
<description>8x over-sampling using arithmetic baudrate generation</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8X_FRACTIONAL</name>
<description>8x over-sampling using fractional baudrate generation</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>3X_ARITHMETIC</name>
<description>3x over-sampling using arithmetic baudrate generation</description>
<value>0x4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TXPO</name>
<description>Transmit Data Pinout</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>TXPOSelect</name>
<enumeratedValue>
<name>PAD0</name>
<description>SERCOM PAD[0] is used for data transmission</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD3</name>
<description>SERCOM_PAD[0] is used for data transmission</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RXPO</name>
<description>Receive Data Pinout</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>RXPOSelect</name>
<enumeratedValue>
<name>PAD0</name>
<description>SERCOM PAD[0] is used for data reception</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD1</name>
<description>SERCOM PAD[1] is used for data reception</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD2</name>
<description>SERCOM PAD[2] is used for data reception</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PAD3</name>
<description>SERCOM PAD[3] is used for data reception</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SAMPA</name>
<description>Sample Adjustment</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FORM</name>
<description>Frame Format</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>FORMSelect</name>
<enumeratedValue>
<name>USART_FRAME_NO_PARITY</name>
<description>USART frame</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_FRAME_WITH_PARITY</name>
<description>USART frame with parity</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_FRAME_LIN_MASTER_MODE</name>
<description>LIN Master - Break and sync generation</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_FRAME_AUTO_BAUD_NO_PARITY</name>
<description>Auto-baud - break detection and auto-baud</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_FRAME_AUTO_BAUD_WITH_PARITY</name>
<description>Auto-baud - break detection and auto-baud with parity</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>USART_FRAME_ISO_7816</name>
<description>ISO 7816</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMODE</name>
<description>Communication Mode</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CMODESelect</name>
<enumeratedValue>
<name>ASYNC</name>
<description>Asynchronous Communication</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SYNC</name>
<description>Synchronous Communication</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CPOL</name>
<description>Clock Polarity</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CPOLSelect</name>
<enumeratedValue>
<name>IDLE_LOW</name>
<description>TxD Change:- Rising XCK edge, RxD Sample:- Falling XCK edge</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>IDLE_HIGH</name>
<description>TxD Change:- Falling XCK edge, RxD Sample:- Rising XCK edge</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DORD</name>
<description>Data Order</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>DORDSelect</name>
<enumeratedValue>
<name>MSB</name>
<description>MSB is transmitted first</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LSB</name>
<description>LSB is transmitted first</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>USART_INT Control B</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CHSIZE</name>
<description>Character Size</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CHSIZESelect</name>
<enumeratedValue>
<name>8_BIT</name>
<description>8 Bits</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>9_BIT</name>
<description>9 Bits</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>5_BIT</name>
<description>5 Bits</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>6_BIT</name>
<description>6 Bits</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>7_BIT</name>
<description>7 Bits</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SBMODE</name>
<description>Stop Bit Mode</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SBMODESelect</name>
<enumeratedValue>
<name>1_BIT</name>
<description>One Stop Bit</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2_BIT</name>
<description>Two Stop Bits</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>COLDEN</name>
<description>Collision Detection Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SFDE</name>
<description>Start of Frame Detection Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENC</name>
<description>Encoding Format</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PMODE</name>
<description>Parity Mode</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>PMODESelect</name>
<enumeratedValue>
<name>EVEN</name>
<description>Even Parity</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ODD</name>
<description>Odd Parity</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LINCMD</name>
<description>LIN Command</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLC</name>
<description>USART_INT Control C</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>GTIME</name>
<description>Guard Time</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>BRKLEN</name>
<description>LIN Master Break Length</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>HDRDLY</name>
<description>LIN Master Header Delay</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>INACK</name>
<description>Inhibit Not Acknowledge</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DSNACK</name>
<description>Disable Successive NACK</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MAXITER</name>
<description>Maximum Iterations</description>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>DATA32B</name>
<description>Data 32 Bit</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DATA32BSelect</name>
<enumeratedValue>
<name>DATA_READ_WRITE_CHSIZE</name>
<description>Data reads and writes according CTRLB.CHSIZE</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA_READ_CHSIZE_WRITE_32BIT</name>
<description>Data reads according CTRLB.CHSIZE and writes according 32-bit extension</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA_READ_32BIT_WRITE_CHSIZE</name>
<description>Data reads according 32-bit extension and writes according CTRLB.CHSIZE</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DATA_READ_WRITE_32BIT</name>
<description>Data reads and writes according 32-bit extension</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BAUD</name>
<description>USART_INT Baud Rate</description>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>BAUD_FRAC_MODE</name>
<description>USART_INT Baud Rate</description>
<alternateRegister>BAUD</alternateRegister>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>13</bitWidth>
</field>
<field>
<name>FP</name>
<description>Fractional Part</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>BAUD_FRACFP_MODE</name>
<description>USART_INT Baud Rate</description>
<alternateRegister>BAUD</alternateRegister>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>13</bitWidth>
</field>
<field>
<name>FP</name>
<description>Fractional Part</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>BAUD_USARTFP_MODE</name>
<description>USART_INT Baud Rate</description>
<alternateRegister>BAUD</alternateRegister>
<addressOffset>0xC</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>RXPL</name>
<description>USART_INT Receive Pulse Length</description>
<addressOffset>0xE</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>RXPL</name>
<description>Receive Pulse Length</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>USART_INT Interrupt Enable Clear</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXS</name>
<description>Receive Start Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSIC</name>
<description>Clear To Send Input Change Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXBRK</name>
<description>Break Received Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>USART_INT Interrupt Enable Set</description>
<addressOffset>0x16</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXS</name>
<description>Receive Start Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSIC</name>
<description>Clear To Send Input Change Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXBRK</name>
<description>Break Received Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>USART_INT Interrupt Flag Status and Clear</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXS</name>
<description>Receive Start Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSIC</name>
<description>Clear To Send Input Change Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXBRK</name>
<description>Break Received Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>USART_INT Status</description>
<addressOffset>0x1A</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PERR</name>
<description>Parity Error</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FERR</name>
<description>Frame Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUFOVF</name>
<description>Buffer Overflow</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTS</name>
<description>Clear To Send</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISF</name>
<description>Inconsistent Sync Field</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COLL</name>
<description>Collision Detected</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXE</name>
<description>Transmitter Empty</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ITER</name>
<description>Maximum Number of Repetitions Reached</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>USART_INT Synchronization Busy</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>SERCOM Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>CTRLB Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXERRCNT</name>
<description>RXERRCNT Synchronization Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LENGTH</name>
<description>LENGTH Synchronization Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RXERRCNT</name>
<description>USART_INT Receive Error Count</description>
<addressOffset>0x20</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
</register>
<register>
<name>LENGTH</name>
<description>USART_INT Length</description>
<addressOffset>0x22</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>LEN</name>
<description>Data Length</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>LENEN</name>
<description>Data Length Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>USART_INT Data</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Data Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>USART_INT Debug Control</description>
<addressOffset>0x30</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGSTOP</name>
<description>Debug Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster>
</registers>
</peripheral>
<peripheral derivedFrom="SERCOM0">
<name>SERCOM1</name>
<baseAddress>0x40003400</baseAddress>
<interrupt>
<name>SERCOM1_0</name>
<value>50</value>
</interrupt>
<interrupt>
<name>SERCOM1_1</name>
<value>51</value>
</interrupt>
<interrupt>
<name>SERCOM1_2</name>
<value>52</value>
</interrupt>
<interrupt>
<name>SERCOM1_OTHER</name>
<value>53</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SERCOM0">
<name>SERCOM2</name>
<baseAddress>0x41012000</baseAddress>
<interrupt>
<name>SERCOM2_0</name>
<value>54</value>
</interrupt>
<interrupt>
<name>SERCOM2_1</name>
<value>55</value>
</interrupt>
<interrupt>
<name>SERCOM2_2</name>
<value>56</value>
</interrupt>
<interrupt>
<name>SERCOM2_OTHER</name>
<value>57</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SERCOM0">
<name>SERCOM3</name>
<baseAddress>0x41014000</baseAddress>
<interrupt>
<name>SERCOM3_0</name>
<value>58</value>
</interrupt>
<interrupt>
<name>SERCOM3_1</name>
<value>59</value>
</interrupt>
<interrupt>
<name>SERCOM3_2</name>
<value>60</value>
</interrupt>
<interrupt>
<name>SERCOM3_OTHER</name>
<value>61</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SERCOM0">
<name>SERCOM4</name>
<baseAddress>0x43000000</baseAddress>
<interrupt>
<name>SERCOM4_0</name>
<value>62</value>
</interrupt>
<interrupt>
<name>SERCOM4_1</name>
<value>63</value>
</interrupt>
<interrupt>
<name>SERCOM4_2</name>
<value>64</value>
</interrupt>
<interrupt>
<name>SERCOM4_OTHER</name>
<value>65</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SERCOM0">
<name>SERCOM5</name>
<baseAddress>0x43000400</baseAddress>
<interrupt>
<name>SERCOM5_0</name>
<value>66</value>
</interrupt>
<interrupt>
<name>SERCOM5_1</name>
<value>67</value>
</interrupt>
<interrupt>
<name>SERCOM5_2</name>
<value>68</value>
</interrupt>
<interrupt>
<name>SERCOM5_OTHER</name>
<value>69</value>
</interrupt>
</peripheral>
<peripheral>
<name>SUPC</name>
<version>U24071.1.0</version>
<description>Supply Controller</description>
<groupName>SUPC</groupName>
<prependToName>SUPC_</prependToName>
<baseAddress>0x40001800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x2C</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SUPC_OTHER</name>
<value>8</value>
</interrupt>
<interrupt>
<name>SUPC_BODDET</name>
<value>9</value>
</interrupt>
<registers>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BOD33RDY</name>
<description>BOD33 Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD33DET</name>
<description>BOD33 Detection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B33SRDY</name>
<description>BOD33 Synchronization Ready</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREGRDY</name>
<description>Voltage Regulator Ready</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VCORERDY</name>
<description>VDDCORE Ready</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BOD33RDY</name>
<description>BOD33 Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD33DET</name>
<description>BOD33 Detection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B33SRDY</name>
<description>BOD33 Synchronization Ready</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREGRDY</name>
<description>Voltage Regulator Ready</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VCORERDY</name>
<description>VDDCORE Ready</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BOD33RDY</name>
<description>BOD33 Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD33DET</name>
<description>BOD33 Detection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B33SRDY</name>
<description>BOD33 Synchronization Ready</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREGRDY</name>
<description>Voltage Regulator Ready</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VCORERDY</name>
<description>VDDCORE Ready</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Power and Clocks Status</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BOD33RDY</name>
<description>BOD33 Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD33DET</name>
<description>BOD33 Detection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B33SRDY</name>
<description>BOD33 Synchronization Ready</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREGRDY</name>
<description>Voltage Regulator Ready</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VCORERDY</name>
<description>VDDCORE Ready</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BOD33</name>
<description>BOD33 Control</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACTION</name>
<description>Action when Threshold Crossed</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>ACTIONSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RESET</name>
<description>The BOD33 generates a reset</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>INT</name>
<description>The BOD33 generates an interrupt</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BKUP</name>
<description>The BOD33 puts the device in backup sleep mode</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STDBYCFG</name>
<description>Configuration in Standby mode</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNHIB</name>
<description>Run in Hibernate mode</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNBKUP</name>
<description>Run in Backup mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HYST</name>
<description>Hysteresis value</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PSEL</name>
<description>Prescaler Select</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PSELSelect</name>
<enumeratedValue>
<name>NODIV</name>
<description>Not divided</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Divide clock by 4</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Divide clock by 8</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Divide clock by 16</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>Divide clock by 32</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Divide clock by 64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>Divide clock by 128</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Divide clock by 256</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LEVEL</name>
<description>Threshold Level for VDD</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>VBATLEVEL</name>
<description>Threshold Level in battery backup sleep mode for VBAT</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>VREG</name>
<description>VREG Control</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<resetValue>0x00000002</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEL</name>
<description>Voltage Regulator Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SELSelect</name>
<enumeratedValue>
<name>LDO</name>
<description>LDO selection</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>BUCK</name>
<description>Buck selection</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNBKUP</name>
<description>Run in Backup mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSEN</name>
<description>Voltage Scaling Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSPER</name>
<description>Voltage Scaling Period</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>VREF</name>
<description>VREF Control</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TSEN</name>
<description>Temperature Sensor Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREFOE</name>
<description>Voltage Reference Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSSEL</name>
<description>Temperature Sensor Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand Contrl</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEL</name>
<description>Voltage Reference Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>SELSelect</name>
<enumeratedValue>
<name>1V0</name>
<description>1.0V voltage reference typical value</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1V1</name>
<description>1.1V voltage reference typical value</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>1V2</name>
<description>1.2V voltage reference typical value</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>1V25</name>
<description>1.25V voltage reference typical value</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>2V0</name>
<description>2.0V voltage reference typical value</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>2V2</name>
<description>2.2V voltage reference typical value</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>2V4</name>
<description>2.4V voltage reference typical value</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>2V5</name>
<description>2.5V voltage reference typical value</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BBPS</name>
<description>Battery Backup Power Switch</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CONF</name>
<description>Battery Backup Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CONFSelect</name>
<enumeratedValue>
<name>BOD33</name>
<description>The power switch is handled by the BOD33</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FORCED</name>
<description>In Backup Domain, the backup domain is always supplied by battery backup power</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAKEEN</name>
<description>Wake Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BKOUT</name>
<description>Backup Output Control</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENOUT0</name>
<description>Enable OUT0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENOUT1</name>
<description>Enable OUT1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLROUT0</name>
<description>Clear OUT0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLROUT1</name>
<description>Clear OUT1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETOUT0</name>
<description>Set OUT0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SETOUT1</name>
<description>Set OUT1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTCTGLOUT0</name>
<description>RTC Toggle OUT0</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTCTGLOUT1</name>
<description>RTC Toggle OUT1</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BKIN</name>
<description>Backup Input Control</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>BKIN0</name>
<description>Backup Input 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKIN1</name>
<description>Backup Input 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TC0</name>
<version>U22493.0.0</version>
<description>Basic Timer Counter</description>
<groupName>TC</groupName>
<prependToName>TC_</prependToName>
<baseAddress>0x40003800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x38</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TC0</name>
<value>107</value>
</interrupt>
<registers>
<cluster>
<name>COUNT8</name>
<description>8-bit Counter Mode</description>
<headerStructName>TcCount8</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Timer Counter Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>COUNT16</name>
<description>Counter in 16-bit mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT8</name>
<description>Counter in 8-bit mode</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT32</name>
<description>Counter in 32-bit mode</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRESCSYNC</name>
<description>Prescaler and Counter Synchronization</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PRESCSYNCSelect</name>
<enumeratedValue>
<name>GCLK</name>
<description>Reload or reset the counter on next generic clock</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRESC</name>
<description>Reload or reset the counter on next prescaler clock</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESYNC</name>
<description>Reload or reset the counter on next generic clock and reset the prescaler counter</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>Clock On Demand</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>Prescaler: GCLK_TC</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Prescaler: GCLK_TC/2</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Prescaler: GCLK_TC/4</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Prescaler: GCLK_TC/8</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Prescaler: GCLK_TC/16</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Prescaler: GCLK_TC/64</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Prescaler: GCLK_TC/256</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>Prescaler: GCLK_TC/1024</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ALOCK</name>
<description>Auto Lock</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTEN0</name>
<description>Capture Channel 0 Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTEN1</name>
<description>Capture Channel 1 Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COPEN0</name>
<description>Capture On Pin 0 Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COPEN1</name>
<description>Capture On Pin 1 Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTMODE0</name>
<description>Capture Mode Channel 0</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CAPTMODE0Select</name>
<enumeratedValue>
<name>DEFAULT</name>
<description>Default capture</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMIN</name>
<description>Minimum capture</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMAX</name>
<description>Maximum capture</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CAPTMODE1</name>
<description>Capture mode Channel 1</description>
<bitOffset>27</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CAPTMODE1Select</name>
<enumeratedValue>
<name>DEFAULT</name>
<description>Default capture</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMIN</name>
<description>Minimum capture</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMAX</name>
<description>Maximum capture</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLBCLR</name>
<description>Control B Clear</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot on Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a start, restart or retrigger</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force a stop</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double-buffered register</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLBSET</name>
<description>Control B Set</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot on Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a start, restart or retrigger</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force a stop</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double-buffered register</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x6</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>EVACT</name>
<description>Event Action</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>EVACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Event action disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Start, restart or retrigger TC on event</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT</name>
<description>Count on event</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>START</name>
<description>Start TC on event</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>STAMP</name>
<description>Time stamp capture</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>PPW</name>
<description>Period catured in CC0, pulse width in CC1</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>PWP</name>
<description>Period catured in CC1, pulse width in CC0</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>PW</name>
<description>Pulse width capture</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCINV</name>
<description>TC Event Input Polarity</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCEI</name>
<description>TC Event Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVFEO</name>
<description>Event Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO0</name>
<description>MC Event Output Enable 0</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO1</name>
<description>MC Event Output Enable 1</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Disable 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Disable 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x9</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Enable 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Enable 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0xA</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Flag 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Flag 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0xB</addressOffset>
<size>8</size>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>STOP</name>
<description>Stop Status Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLAVE</name>
<description>Slave Status Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERBUFV</name>
<description>Synchronization Busy Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV0</name>
<description>Compare channel buffer 0 valid</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV1</name>
<description>Compare channel buffer 1 valid</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WAVE</name>
<description>Waveform Generation Control</description>
<addressOffset>0xC</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>WAVEGEN</name>
<description>Waveform Generation Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>WAVEGENSelect</name>
<enumeratedValue>
<name>NFRQ</name>
<description>Normal frequency</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>MFRQ</name>
<description>Match frequency</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>NPWM</name>
<description>Normal PWM</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>MPWM</name>
<description>Match PWM</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>DRVCTRL</name>
<description>Control C</description>
<addressOffset>0xD</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>INVEN0</name>
<description>Output Waveform Invert Enable 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN1</name>
<description>Output Waveform Invert Enable 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0xF</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGRUN</name>
<description>Run During Debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>swrst</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>CTRLB</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STATUS</name>
<description>STATUS</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNT</name>
<description>Counter</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC0</name>
<description>Compare Channel 0</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1</name>
<description>Compare Channel 1</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT</name>
<description>COUNT8 Count</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>PER</name>
<description>COUNT8 Period</description>
<addressOffset>0x1B</addressOffset>
<size>8</size>
<resetValue>0xFF</resetValue>
<fields>
<field>
<name>PER</name>
<description>Period Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>1</dimIncrement>
<name>CC[%s]</name>
<description>COUNT8 Compare and Capture</description>
<addressOffset>0x1C</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>CC</name>
<description>Counter/Compare Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERBUF</name>
<description>COUNT8 Period Buffer</description>
<addressOffset>0x2F</addressOffset>
<size>8</size>
<resetValue>0xFF</resetValue>
<fields>
<field>
<name>PERBUF</name>
<description>Period Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>1</dimIncrement>
<name>CCBUF[%s]</name>
<description>COUNT8 Compare and Capture Buffer</description>
<addressOffset>0x30</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>CCBUF</name>
<description>Counter/Compare Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
</cluster>
<cluster>
<name>COUNT16</name>
<description>16-bit Counter Mode</description>
<alternateCluster>COUNT8</alternateCluster>
<headerStructName>TcCount16</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Timer Counter Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>COUNT16</name>
<description>Counter in 16-bit mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT8</name>
<description>Counter in 8-bit mode</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT32</name>
<description>Counter in 32-bit mode</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRESCSYNC</name>
<description>Prescaler and Counter Synchronization</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PRESCSYNCSelect</name>
<enumeratedValue>
<name>GCLK</name>
<description>Reload or reset the counter on next generic clock</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRESC</name>
<description>Reload or reset the counter on next prescaler clock</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESYNC</name>
<description>Reload or reset the counter on next generic clock and reset the prescaler counter</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>Clock On Demand</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>Prescaler: GCLK_TC</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Prescaler: GCLK_TC/2</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Prescaler: GCLK_TC/4</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Prescaler: GCLK_TC/8</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Prescaler: GCLK_TC/16</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Prescaler: GCLK_TC/64</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Prescaler: GCLK_TC/256</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>Prescaler: GCLK_TC/1024</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ALOCK</name>
<description>Auto Lock</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTEN0</name>
<description>Capture Channel 0 Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTEN1</name>
<description>Capture Channel 1 Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COPEN0</name>
<description>Capture On Pin 0 Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COPEN1</name>
<description>Capture On Pin 1 Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTMODE0</name>
<description>Capture Mode Channel 0</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CAPTMODE0Select</name>
<enumeratedValue>
<name>DEFAULT</name>
<description>Default capture</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMIN</name>
<description>Minimum capture</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMAX</name>
<description>Maximum capture</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CAPTMODE1</name>
<description>Capture mode Channel 1</description>
<bitOffset>27</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CAPTMODE1Select</name>
<enumeratedValue>
<name>DEFAULT</name>
<description>Default capture</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMIN</name>
<description>Minimum capture</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMAX</name>
<description>Maximum capture</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLBCLR</name>
<description>Control B Clear</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot on Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a start, restart or retrigger</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force a stop</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double-buffered register</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLBSET</name>
<description>Control B Set</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot on Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a start, restart or retrigger</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force a stop</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double-buffered register</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x6</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>EVACT</name>
<description>Event Action</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>EVACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Event action disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Start, restart or retrigger TC on event</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT</name>
<description>Count on event</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>START</name>
<description>Start TC on event</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>STAMP</name>
<description>Time stamp capture</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>PPW</name>
<description>Period catured in CC0, pulse width in CC1</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>PWP</name>
<description>Period catured in CC1, pulse width in CC0</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>PW</name>
<description>Pulse width capture</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCINV</name>
<description>TC Event Input Polarity</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCEI</name>
<description>TC Event Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVFEO</name>
<description>Event Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO0</name>
<description>MC Event Output Enable 0</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO1</name>
<description>MC Event Output Enable 1</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Disable 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Disable 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x9</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Enable 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Enable 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0xA</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Flag 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Flag 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0xB</addressOffset>
<size>8</size>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>STOP</name>
<description>Stop Status Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLAVE</name>
<description>Slave Status Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERBUFV</name>
<description>Synchronization Busy Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV0</name>
<description>Compare channel buffer 0 valid</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV1</name>
<description>Compare channel buffer 1 valid</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WAVE</name>
<description>Waveform Generation Control</description>
<addressOffset>0xC</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>WAVEGEN</name>
<description>Waveform Generation Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>WAVEGENSelect</name>
<enumeratedValue>
<name>NFRQ</name>
<description>Normal frequency</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>MFRQ</name>
<description>Match frequency</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>NPWM</name>
<description>Normal PWM</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>MPWM</name>
<description>Match PWM</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>DRVCTRL</name>
<description>Control C</description>
<addressOffset>0xD</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>INVEN0</name>
<description>Output Waveform Invert Enable 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN1</name>
<description>Output Waveform Invert Enable 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0xF</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGRUN</name>
<description>Run During Debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>swrst</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>CTRLB</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STATUS</name>
<description>STATUS</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNT</name>
<description>Counter</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC0</name>
<description>Compare Channel 0</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1</name>
<description>Compare Channel 1</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT</name>
<description>COUNT16 Count</description>
<addressOffset>0x14</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>2</dimIncrement>
<name>CC[%s]</name>
<description>COUNT16 Compare and Capture</description>
<addressOffset>0x1C</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CC</name>
<description>Counter/Compare Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>2</dimIncrement>
<name>CCBUF[%s]</name>
<description>COUNT16 Compare and Capture Buffer</description>
<addressOffset>0x30</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>CCBUF</name>
<description>Counter/Compare Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
</cluster>
<cluster>
<name>COUNT32</name>
<description>32-bit Counter Mode</description>
<alternateCluster>COUNT8</alternateCluster>
<headerStructName>TcCount32</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Timer Counter Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>COUNT16</name>
<description>Counter in 16-bit mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT8</name>
<description>Counter in 8-bit mode</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT32</name>
<description>Counter in 32-bit mode</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRESCSYNC</name>
<description>Prescaler and Counter Synchronization</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PRESCSYNCSelect</name>
<enumeratedValue>
<name>GCLK</name>
<description>Reload or reset the counter on next generic clock</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRESC</name>
<description>Reload or reset the counter on next prescaler clock</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESYNC</name>
<description>Reload or reset the counter on next generic clock and reset the prescaler counter</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>Clock On Demand</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>Prescaler: GCLK_TC</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Prescaler: GCLK_TC/2</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Prescaler: GCLK_TC/4</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Prescaler: GCLK_TC/8</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Prescaler: GCLK_TC/16</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Prescaler: GCLK_TC/64</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Prescaler: GCLK_TC/256</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>Prescaler: GCLK_TC/1024</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ALOCK</name>
<description>Auto Lock</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTEN0</name>
<description>Capture Channel 0 Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTEN1</name>
<description>Capture Channel 1 Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COPEN0</name>
<description>Capture On Pin 0 Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COPEN1</name>
<description>Capture On Pin 1 Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTMODE0</name>
<description>Capture Mode Channel 0</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CAPTMODE0Select</name>
<enumeratedValue>
<name>DEFAULT</name>
<description>Default capture</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMIN</name>
<description>Minimum capture</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMAX</name>
<description>Maximum capture</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CAPTMODE1</name>
<description>Capture mode Channel 1</description>
<bitOffset>27</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CAPTMODE1Select</name>
<enumeratedValue>
<name>DEFAULT</name>
<description>Default capture</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMIN</name>
<description>Minimum capture</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMAX</name>
<description>Maximum capture</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLBCLR</name>
<description>Control B Clear</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot on Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a start, restart or retrigger</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force a stop</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double-buffered register</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLBSET</name>
<description>Control B Set</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot on Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a start, restart or retrigger</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force a stop</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double-buffered register</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x6</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>EVACT</name>
<description>Event Action</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>EVACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Event action disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Start, restart or retrigger TC on event</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT</name>
<description>Count on event</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>START</name>
<description>Start TC on event</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>STAMP</name>
<description>Time stamp capture</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>PPW</name>
<description>Period catured in CC0, pulse width in CC1</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>PWP</name>
<description>Period catured in CC1, pulse width in CC0</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>PW</name>
<description>Pulse width capture</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCINV</name>
<description>TC Event Input Polarity</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCEI</name>
<description>TC Event Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVFEO</name>
<description>Event Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO0</name>
<description>MC Event Output Enable 0</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO1</name>
<description>MC Event Output Enable 1</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Disable 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Disable 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x9</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Enable 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Enable 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0xA</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Flag 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Flag 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0xB</addressOffset>
<size>8</size>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>STOP</name>
<description>Stop Status Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLAVE</name>
<description>Slave Status Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERBUFV</name>
<description>Synchronization Busy Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV0</name>
<description>Compare channel buffer 0 valid</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV1</name>
<description>Compare channel buffer 1 valid</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WAVE</name>
<description>Waveform Generation Control</description>
<addressOffset>0xC</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>WAVEGEN</name>
<description>Waveform Generation Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>WAVEGENSelect</name>
<enumeratedValue>
<name>NFRQ</name>
<description>Normal frequency</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>MFRQ</name>
<description>Match frequency</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>NPWM</name>
<description>Normal PWM</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>MPWM</name>
<description>Match PWM</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>DRVCTRL</name>
<description>Control C</description>
<addressOffset>0xD</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>INVEN0</name>
<description>Output Waveform Invert Enable 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN1</name>
<description>Output Waveform Invert Enable 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0xF</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGRUN</name>
<description>Run During Debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>swrst</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>CTRLB</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STATUS</name>
<description>STATUS</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNT</name>
<description>Counter</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC0</name>
<description>Compare Channel 0</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1</name>
<description>Compare Channel 1</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT</name>
<description>COUNT32 Count</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<name>CC[%s]</name>
<description>COUNT32 Compare and Capture</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CC</name>
<description>Counter/Compare Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<name>CCBUF[%s]</name>
<description>COUNT32 Compare and Capture Buffer</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCBUF</name>
<description>Counter/Compare Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</cluster>
</registers>
</peripheral>
<peripheral derivedFrom="TC0">
<name>TC1</name>
<baseAddress>0x40003C00</baseAddress>
<interrupt>
<name>TC1</name>
<value>108</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="TC0">
<name>TC2</name>
<baseAddress>0x4101A000</baseAddress>
<interrupt>
<name>TC2</name>
<value>109</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="TC0">
<name>TC3</name>
<baseAddress>0x4101C000</baseAddress>
<interrupt>
<name>TC3</name>
<value>110</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="TC0">
<name>TC4</name>
<baseAddress>0x42001400</baseAddress>
<interrupt>
<name>TC4</name>
<value>111</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="TC0">
<name>TC5</name>
<baseAddress>0x42001800</baseAddress>
<interrupt>
<name>TC5</name>
<value>112</value>
</interrupt>
</peripheral>
<peripheral>
<name>TCC0</name>
<version>U22133.1.0</version>
<description>Timer Counter Control</description>
<groupName>TCC</groupName>
<prependToName>TCC_</prependToName>
<baseAddress>0x41016000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x88</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TCC0_OTHER</name>
<value>85</value>
</interrupt>
<interrupt>
<name>TCC0_MC0</name>
<value>86</value>
</interrupt>
<interrupt>
<name>TCC0_MC1</name>
<value>87</value>
</interrupt>
<interrupt>
<name>TCC0_MC2</name>
<value>88</value>
</interrupt>
<interrupt>
<name>TCC0_MC3</name>
<value>89</value>
</interrupt>
<interrupt>
<name>TCC0_MC4</name>
<value>90</value>
</interrupt>
<interrupt>
<name>TCC0_MC5</name>
<value>91</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESOLUTION</name>
<description>Enhanced Resolution</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>RESOLUTIONSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>Dithering is disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DITH4</name>
<description>Dithering is done every 16 PWM frames</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>DITH5</name>
<description>Dithering is done every 32 PWM frames</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>DITH6</name>
<description>Dithering is done every 64 PWM frames</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>No division</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Divide by 2</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Divide by 4</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Divide by 8</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Divide by 16</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Divide by 64</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Divide by 256</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>Divide by 1024</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCSYNC</name>
<description>Prescaler and Counter Synchronization Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PRESCSYNCSelect</name>
<enumeratedValue>
<name>GCLK</name>
<description>Reload or reset counter on next GCLK</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRESC</name>
<description>Reload or reset counter on next prescaler clock</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESYNC</name>
<description>Reload or reset counter on next GCLK and reset prescaler counter</description>
<value>2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ALOCK</name>
<description>Auto Lock</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSYNC</name>
<description>Master Synchronization (only for TCC Slave Instance)</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAOS</name>
<description>DMA One-shot Trigger Mode</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPTEN0</name>
<description>Capture Channel 0 Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPTEN1</name>
<description>Capture Channel 1 Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPTEN2</name>
<description>Capture Channel 2 Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPTEN3</name>
<description>Capture Channel 3 Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPTEN4</name>
<description>Capture Channel 4 Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPTEN5</name>
<description>Capture Channel 5 Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLBCLR</name>
<description>Control B Clear</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDXCMD</name>
<description>Ramp Index Command</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IDXCMDSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Command disabled: Index toggles between cycles A and B</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set index: cycle B will be forced in the next cycle</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear index: cycle A will be forced in the next cycle</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>HOLD</name>
<description>Hold index: the next cycle will be the same as the current cycle</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMD</name>
<description>TCC Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Clear start, restart or retrigger</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force stop</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update or double buffered registers</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force COUNT read synchronization</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLBSET</name>
<description>Control B Set</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDXCMD</name>
<description>Ramp Index Command</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IDXCMDSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Command disabled: Index toggles between cycles A and B</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set index: cycle B will be forced in the next cycle</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear index: cycle A will be forced in the next cycle</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>HOLD</name>
<description>Hold index: the next cycle will be the same as the current cycle</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMD</name>
<description>TCC Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Clear start, restart or retrigger</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force stop</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update or double buffered registers</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force COUNT read synchronization</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Swrst Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>Ctrlb Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STATUS</name>
<description>Status Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNT</name>
<description>Count Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PATT</name>
<description>Pattern Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAVE</name>
<description>Wave Busy</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period Busy</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC0</name>
<description>Compare Channel 0 Busy</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1</name>
<description>Compare Channel 1 Busy</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2</name>
<description>Compare Channel 2 Busy</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3</name>
<description>Compare Channel 3 Busy</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC4</name>
<description>Compare Channel 4 Busy</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC5</name>
<description>Compare Channel 5 Busy</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FCTRLA</name>
<description>Recoverable Fault A Configuration</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SRC</name>
<description>Fault A Source</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SRCSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Fault input disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>MCEx (x=0,1) event input</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>INVERT</name>
<description>Inverted MCEx (x=0,1) event input</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>ALTFAULT</name>
<description>Alternate fault (A or B) state at the end of the previous period</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>KEEP</name>
<description>Fault A Keeper</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QUAL</name>
<description>Fault A Qualification</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BLANK</name>
<description>Fault A Blanking Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>BLANKSelect</name>
<enumeratedValue>
<name>START</name>
<description>Blanking applied from start of the ramp</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Blanking applied from rising edge of the output waveform</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Blanking applied from falling edge of the output waveform</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Blanking applied from each toggle of the output waveform</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RESTART</name>
<description>Fault A Restart</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HALT</name>
<description>Fault A Halt Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>HALTSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Halt action disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>HW</name>
<description>Hardware halt action</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>SW</name>
<description>Software halt action</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>NR</name>
<description>Non-recoverable fault</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHSEL</name>
<description>Fault A Capture Channel</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CHSELSelect</name>
<enumeratedValue>
<name>CC0</name>
<description>Capture value stored in channel 0</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CC1</name>
<description>Capture value stored in channel 1</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CC2</name>
<description>Capture value stored in channel 2</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CC3</name>
<description>Capture value stored in channel 3</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CAPTURE</name>
<description>Fault A Capture Action</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CAPTURESelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>No capture</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPT</name>
<description>Capture on fault</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMIN</name>
<description>Minimum capture</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMAX</name>
<description>Maximum capture</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCMIN</name>
<description>Minimum local detection</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCMAX</name>
<description>Maximum local detection</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DERIV0</name>
<description>Minimum and maximum local detection</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMARK</name>
<description>Capture with ramp index as MSB value</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BLANKPRESC</name>
<description>Fault A Blanking Prescaler</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BLANKVAL</name>
<description>Fault A Blanking Time</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>FILTERVAL</name>
<description>Fault A Filter Value</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>FCTRLB</name>
<description>Recoverable Fault B Configuration</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>SRC</name>
<description>Fault B Source</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SRCSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Fault input disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>MCEx (x=0,1) event input</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>INVERT</name>
<description>Inverted MCEx (x=0,1) event input</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>ALTFAULT</name>
<description>Alternate fault (A or B) state at the end of the previous period</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>KEEP</name>
<description>Fault B Keeper</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QUAL</name>
<description>Fault B Qualification</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BLANK</name>
<description>Fault B Blanking Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>BLANKSelect</name>
<enumeratedValue>
<name>START</name>
<description>Blanking applied from start of the ramp</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Blanking applied from rising edge of the output waveform</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Blanking applied from falling edge of the output waveform</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Blanking applied from each toggle of the output waveform</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RESTART</name>
<description>Fault B Restart</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HALT</name>
<description>Fault B Halt Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>HALTSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Halt action disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>HW</name>
<description>Hardware halt action</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>SW</name>
<description>Software halt action</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>NR</name>
<description>Non-recoverable fault</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHSEL</name>
<description>Fault B Capture Channel</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CHSELSelect</name>
<enumeratedValue>
<name>CC0</name>
<description>Capture value stored in channel 0</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CC1</name>
<description>Capture value stored in channel 1</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CC2</name>
<description>Capture value stored in channel 2</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CC3</name>
<description>Capture value stored in channel 3</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CAPTURE</name>
<description>Fault B Capture Action</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CAPTURESelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>No capture</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPT</name>
<description>Capture on fault</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMIN</name>
<description>Minimum capture</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMAX</name>
<description>Maximum capture</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCMIN</name>
<description>Minimum local detection</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCMAX</name>
<description>Maximum local detection</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DERIV0</name>
<description>Minimum and maximum local detection</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMARK</name>
<description>Capture with ramp index as MSB value</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BLANKPRESC</name>
<description>Fault B Blanking Prescaler</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BLANKVAL</name>
<description>Fault B Blanking Time</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>FILTERVAL</name>
<description>Fault B Filter Value</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>WEXCTRL</name>
<description>Waveform Extension Configuration</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OTMX</name>
<description>Output Matrix</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DTIEN0</name>
<description>Dead-time Insertion Generator 0 Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTIEN1</name>
<description>Dead-time Insertion Generator 1 Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTIEN2</name>
<description>Dead-time Insertion Generator 2 Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTIEN3</name>
<description>Dead-time Insertion Generator 3 Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTLS</name>
<description>Dead-time Low Side Outputs Value</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DTHS</name>
<description>Dead-time High Side Outputs Value</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DRVCTRL</name>
<description>Driver Control</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>NRE0</name>
<description>Non-Recoverable State 0 Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE1</name>
<description>Non-Recoverable State 1 Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE2</name>
<description>Non-Recoverable State 2 Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE3</name>
<description>Non-Recoverable State 3 Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE4</name>
<description>Non-Recoverable State 4 Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE5</name>
<description>Non-Recoverable State 5 Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE6</name>
<description>Non-Recoverable State 6 Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE7</name>
<description>Non-Recoverable State 7 Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV0</name>
<description>Non-Recoverable State 0 Output Value</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV1</name>
<description>Non-Recoverable State 1 Output Value</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV2</name>
<description>Non-Recoverable State 2 Output Value</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV3</name>
<description>Non-Recoverable State 3 Output Value</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV4</name>
<description>Non-Recoverable State 4 Output Value</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV5</name>
<description>Non-Recoverable State 5 Output Value</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV6</name>
<description>Non-Recoverable State 6 Output Value</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV7</name>
<description>Non-Recoverable State 7 Output Value</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN0</name>
<description>Output Waveform 0 Inversion</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN1</name>
<description>Output Waveform 1 Inversion</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN2</name>
<description>Output Waveform 2 Inversion</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN3</name>
<description>Output Waveform 3 Inversion</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN4</name>
<description>Output Waveform 4 Inversion</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN5</name>
<description>Output Waveform 5 Inversion</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN6</name>
<description>Output Waveform 6 Inversion</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN7</name>
<description>Output Waveform 7 Inversion</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FILTERVAL0</name>
<description>Non-Recoverable Fault Input 0 Filter Value</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FILTERVAL1</name>
<description>Non-Recoverable Fault Input 1 Filter Value</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x1E</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DBGRUN</name>
<description>Debug Running Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FDDBD</name>
<description>Fault Detection on Debug Break Detection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>EVACT0</name>
<description>Timer/counter Input Event0 Action</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>EVACT0Select</name>
<enumeratedValue>
<name>OFF</name>
<description>Event action disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Start, restart or re-trigger counter on event</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNTEV</name>
<description>Count on event</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>START</name>
<description>Start counter on event</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>INC</name>
<description>Increment counter on event</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT</name>
<description>Count on active state of asynchronous event</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>STAMP</name>
<description>Stamp capture</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>FAULT</name>
<description>Non-recoverable fault</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EVACT1</name>
<description>Timer/counter Input Event1 Action</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>EVACT1Select</name>
<enumeratedValue>
<name>OFF</name>
<description>Event action disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Re-trigger counter on event</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIR</name>
<description>Direction control</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Stop counter on event</description>
<value>3</value>
</enumeratedValue>
<enumeratedValue>
<name>DEC</name>
<description>Decrement counter on event</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>PPW</name>
<description>Period capture value in CC0 register, pulse width capture value in CC1 register</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>PWP</name>
<description>Period capture value in CC1 register, pulse width capture value in CC0 register</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>FAULT</name>
<description>Non-recoverable fault</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CNTSEL</name>
<description>Timer/counter Output Event Mode</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CNTSELSelect</name>
<enumeratedValue>
<name>START</name>
<description>An interrupt/event is generated when a new counter cycle starts</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>END</name>
<description>An interrupt/event is generated when a counter cycle ends</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>BETWEEN</name>
<description>An interrupt/event is generated when a counter cycle ends, except for the first and last cycles</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOUNDARY</name>
<description>An interrupt/event is generated when a new counter cycle starts or a counter cycle ends</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>OVFEO</name>
<description>Overflow/Underflow Output Event Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRGEO</name>
<description>Retrigger Output Event Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNTEO</name>
<description>Timer/counter Output Event Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCINV0</name>
<description>Inverted Event 0 Input Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCINV1</name>
<description>Inverted Event 1 Input Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCEI0</name>
<description>Timer/counter Event 0 Input Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCEI1</name>
<description>Timer/counter Event 1 Input Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEI0</name>
<description>Match or Capture Channel 0 Event Input Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEI1</name>
<description>Match or Capture Channel 1 Event Input Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEI2</name>
<description>Match or Capture Channel 2 Event Input Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEI3</name>
<description>Match or Capture Channel 3 Event Input Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEI4</name>
<description>Match or Capture Channel 4 Event Input Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEI5</name>
<description>Match or Capture Channel 5 Event Input Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO0</name>
<description>Match or Capture Channel 0 Event Output Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO1</name>
<description>Match or Capture Channel 1 Event Output Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO2</name>
<description>Match or Capture Channel 2 Event Output Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO3</name>
<description>Match or Capture Channel 3 Event Output Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO4</name>
<description>Match or Capture Channel 4 Event Output Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO5</name>
<description>Match or Capture Channel 5 Event Output Enable</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRG</name>
<description>Retrigger Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNT</name>
<description>Counter Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>Error Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UFS</name>
<description>Non-Recoverable Update Fault Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFS</name>
<description>Non-Recoverable Debug Fault Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTA</name>
<description>Recoverable Fault A Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTB</name>
<description>Recoverable Fault B Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT0</name>
<description>Non-Recoverable Fault 0 Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1</name>
<description>Non-Recoverable Fault 1 Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>Match or Capture Channel 0 Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>Match or Capture Channel 1 Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC2</name>
<description>Match or Capture Channel 2 Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC3</name>
<description>Match or Capture Channel 3 Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC4</name>
<description>Match or Capture Channel 4 Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC5</name>
<description>Match or Capture Channel 5 Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRG</name>
<description>Retrigger Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNT</name>
<description>Counter Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>Error Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UFS</name>
<description>Non-Recoverable Update Fault Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFS</name>
<description>Non-Recoverable Debug Fault Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTA</name>
<description>Recoverable Fault A Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTB</name>
<description>Recoverable Fault B Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT0</name>
<description>Non-Recoverable Fault 0 Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1</name>
<description>Non-Recoverable Fault 1 Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>Match or Capture Channel 0 Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>Match or Capture Channel 1 Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC2</name>
<description>Match or Capture Channel 2 Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC3</name>
<description>Match or Capture Channel 3 Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC4</name>
<description>Match or Capture Channel 4 Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC5</name>
<description>Match or Capture Channel 5 Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x2C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>OVF</name>
<description>Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRG</name>
<description>Retrigger</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNT</name>
<description>Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>Error</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UFS</name>
<description>Non-Recoverable Update Fault</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFS</name>
<description>Non-Recoverable Debug Fault</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTA</name>
<description>Recoverable Fault A</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTB</name>
<description>Recoverable Fault B</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT0</name>
<description>Non-Recoverable Fault 0</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1</name>
<description>Non-Recoverable Fault 1</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>Match or Capture 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>Match or Capture 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC2</name>
<description>Match or Capture 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC3</name>
<description>Match or Capture 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC4</name>
<description>Match or Capture 4</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC5</name>
<description>Match or Capture 5</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>STOP</name>
<description>Stop</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDX</name>
<description>Ramp</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UFS</name>
<description>Non-recoverable Update Fault State</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFS</name>
<description>Non-Recoverable Debug Fault State</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLAVE</name>
<description>Slave</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PATTBUFV</name>
<description>Pattern Buffer Valid</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERBUFV</name>
<description>Period Buffer Valid</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTAIN</name>
<description>Recoverable Fault A Input</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTBIN</name>
<description>Recoverable Fault B Input</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT0IN</name>
<description>Non-Recoverable Fault0 Input</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1IN</name>
<description>Non-Recoverable Fault1 Input</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTA</name>
<description>Recoverable Fault A State</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTB</name>
<description>Recoverable Fault B State</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT0</name>
<description>Non-Recoverable Fault 0 State</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1</name>
<description>Non-Recoverable Fault 1 State</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV0</name>
<description>Compare Channel 0 Buffer Valid</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV1</name>
<description>Compare Channel 1 Buffer Valid</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV2</name>
<description>Compare Channel 2 Buffer Valid</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV3</name>
<description>Compare Channel 3 Buffer Valid</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV4</name>
<description>Compare Channel 4 Buffer Valid</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV5</name>
<description>Compare Channel 5 Buffer Valid</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP0</name>
<description>Compare Channel 0 Value</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare Channel 1 Value</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP2</name>
<description>Compare Channel 2 Value</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP3</name>
<description>Compare Channel 3 Value</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP4</name>
<description>Compare Channel 4 Value</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP5</name>
<description>Compare Channel 5 Value</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT</name>
<description>Count</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT_DITH4_MODE</name>
<description>Count</description>
<alternateRegister>COUNT</alternateRegister>
<addressOffset>0x34</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>4</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT_DITH5_MODE</name>
<description>Count</description>
<alternateRegister>COUNT</alternateRegister>
<addressOffset>0x34</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>5</bitOffset>
<bitWidth>19</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT_DITH6_MODE</name>
<description>Count</description>
<alternateRegister>COUNT</alternateRegister>
<addressOffset>0x34</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>6</bitOffset>
<bitWidth>18</bitWidth>
</field>
</fields>
</register>
<register>
<name>PATT</name>
<description>Pattern</description>
<addressOffset>0x38</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PGE0</name>
<description>Pattern Generator 0 Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE1</name>
<description>Pattern Generator 1 Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE2</name>
<description>Pattern Generator 2 Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE3</name>
<description>Pattern Generator 3 Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE4</name>
<description>Pattern Generator 4 Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE5</name>
<description>Pattern Generator 5 Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE6</name>
<description>Pattern Generator 6 Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE7</name>
<description>Pattern Generator 7 Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV0</name>
<description>Pattern Generator 0 Output Value</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV1</name>
<description>Pattern Generator 1 Output Value</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV2</name>
<description>Pattern Generator 2 Output Value</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV3</name>
<description>Pattern Generator 3 Output Value</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV4</name>
<description>Pattern Generator 4 Output Value</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV5</name>
<description>Pattern Generator 5 Output Value</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV6</name>
<description>Pattern Generator 6 Output Value</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV7</name>
<description>Pattern Generator 7 Output Value</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WAVE</name>
<description>Waveform Control</description>
<addressOffset>0x3C</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>WAVEGEN</name>
<description>Waveform Generation</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>WAVEGENSelect</name>
<enumeratedValue>
<name>NFRQ</name>
<description>Normal frequency</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>MFRQ</name>
<description>Match frequency</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>NPWM</name>
<description>Normal PWM</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>DSCRITICAL</name>
<description>Dual-slope critical</description>
<value>4</value>
</enumeratedValue>
<enumeratedValue>
<name>DSBOTTOM</name>
<description>Dual-slope with interrupt/event condition when COUNT reaches ZERO</description>
<value>5</value>
</enumeratedValue>
<enumeratedValue>
<name>DSBOTH</name>
<description>Dual-slope with interrupt/event condition when COUNT reaches ZERO or TOP</description>
<value>6</value>
</enumeratedValue>
<enumeratedValue>
<name>DSTOP</name>
<description>Dual-slope with interrupt/event condition when COUNT reaches TOP</description>
<value>7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RAMP</name>
<description>Ramp Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>RAMPSelect</name>
<enumeratedValue>
<name>RAMP1</name>
<description>RAMP1 operation</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>RAMP2A</name>
<description>Alternative RAMP2 operation</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>RAMP2</name>
<description>RAMP2 operation</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>RAMP2C</name>
<description>Critical RAMP2 operation</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CIPEREN</name>
<description>Circular period Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CICCEN0</name>
<description>Circular Channel 0 Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CICCEN1</name>
<description>Circular Channel 1 Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CICCEN2</name>
<description>Circular Channel 2 Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CICCEN3</name>
<description>Circular Channel 3 Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL0</name>
<description>Channel 0 Polarity</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL1</name>
<description>Channel 1 Polarity</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL2</name>
<description>Channel 2 Polarity</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL3</name>
<description>Channel 3 Polarity</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL4</name>
<description>Channel 4 Polarity</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL5</name>
<description>Channel 5 Polarity</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP0</name>
<description>Swap DTI Output Pair 0</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP1</name>
<description>Swap DTI Output Pair 1</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP2</name>
<description>Swap DTI Output Pair 2</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP3</name>
<description>Swap DTI Output Pair 3</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PER</name>
<description>Period</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>PER</name>
<description>Period Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>PER_DITH4_MODE</name>
<description>Period</description>
<alternateRegister>PER</alternateRegister>
<addressOffset>0x40</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DITHER</name>
<description>Dithering Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period Value</description>
<bitOffset>4</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<name>PER_DITH5_MODE</name>
<description>Period</description>
<alternateRegister>PER</alternateRegister>
<addressOffset>0x40</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DITHER</name>
<description>Dithering Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period Value</description>
<bitOffset>5</bitOffset>
<bitWidth>19</bitWidth>
</field>
</fields>
</register>
<register>
<name>PER_DITH6_MODE</name>
<description>Period</description>
<alternateRegister>PER</alternateRegister>
<addressOffset>0x40</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DITHER</name>
<description>Dithering Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period Value</description>
<bitOffset>6</bitOffset>
<bitWidth>18</bitWidth>
</field>
</fields>
</register>
<register>
<dim>6</dim>
<dimIncrement>4</dimIncrement>
<name>CC[%s]</name>
<description>Compare and Capture</description>
<addressOffset>0x44</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CC</name>
<description>Channel Compare/Capture Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<dim>6</dim>
<dimIncrement>4</dimIncrement>
<name>CC_DITH4_MODE[%s]</name>
<description>Compare and Capture</description>
<alternateRegister>CC[%s]</alternateRegister>
<addressOffset>0x44</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DITHER</name>
<description>Dithering Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CC</name>
<description>Channel Compare/Capture Value</description>
<bitOffset>4</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<dim>6</dim>
<dimIncrement>4</dimIncrement>
<name>CC_DITH5_MODE[%s]</name>
<description>Compare and Capture</description>
<alternateRegister>CC[%s]</alternateRegister>
<addressOffset>0x44</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DITHER</name>
<description>Dithering Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>CC</name>
<description>Channel Compare/Capture Value</description>
<bitOffset>5</bitOffset>
<bitWidth>19</bitWidth>
</field>
</fields>
</register>
<register>
<dim>6</dim>
<dimIncrement>4</dimIncrement>
<name>CC_DITH6_MODE[%s]</name>
<description>Compare and Capture</description>
<alternateRegister>CC[%s]</alternateRegister>
<addressOffset>0x44</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DITHER</name>
<description>Dithering Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>CC</name>
<description>Channel Compare/Capture Value</description>
<bitOffset>6</bitOffset>
<bitWidth>18</bitWidth>
</field>
</fields>
</register>
<register>
<name>PATTBUF</name>
<description>Pattern Buffer</description>
<addressOffset>0x64</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>PGEB0</name>
<description>Pattern Generator 0 Output Enable Buffer</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB1</name>
<description>Pattern Generator 1 Output Enable Buffer</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB2</name>
<description>Pattern Generator 2 Output Enable Buffer</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB3</name>
<description>Pattern Generator 3 Output Enable Buffer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB4</name>
<description>Pattern Generator 4 Output Enable Buffer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB5</name>
<description>Pattern Generator 5 Output Enable Buffer</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB6</name>
<description>Pattern Generator 6 Output Enable Buffer</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB7</name>
<description>Pattern Generator 7 Output Enable Buffer</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB0</name>
<description>Pattern Generator 0 Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB1</name>
<description>Pattern Generator 1 Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB2</name>
<description>Pattern Generator 2 Output Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB3</name>
<description>Pattern Generator 3 Output Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB4</name>
<description>Pattern Generator 4 Output Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB5</name>
<description>Pattern Generator 5 Output Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB6</name>
<description>Pattern Generator 6 Output Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB7</name>
<description>Pattern Generator 7 Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERBUF</name>
<description>Period Buffer</description>
<addressOffset>0x6C</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>PERBUF</name>
<description>Period Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERBUF_DITH4_MODE</name>
<description>Period Buffer</description>
<alternateRegister>PERBUF</alternateRegister>
<addressOffset>0x6C</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DITHERBUF</name>
<description>Dithering Buffer Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PERBUF</name>
<description>Period Buffer Value</description>
<bitOffset>4</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERBUF_DITH5_MODE</name>
<description>Period Buffer</description>
<alternateRegister>PERBUF</alternateRegister>
<addressOffset>0x6C</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DITHERBUF</name>
<description>Dithering Buffer Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>PERBUF</name>
<description>Period Buffer Value</description>
<bitOffset>5</bitOffset>
<bitWidth>19</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERBUF_DITH6_MODE</name>
<description>Period Buffer</description>
<alternateRegister>PERBUF</alternateRegister>
<addressOffset>0x6C</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DITHERBUF</name>
<description>Dithering Buffer Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>PERBUF</name>
<description>Period Buffer Value</description>
<bitOffset>6</bitOffset>
<bitWidth>18</bitWidth>
</field>
</fields>
</register>
<register>
<dim>6</dim>
<dimIncrement>4</dimIncrement>
<name>CCBUF[%s]</name>
<description>Compare and Capture Buffer</description>
<addressOffset>0x70</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCBUF</name>
<description>Channel Compare/Capture Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<dim>6</dim>
<dimIncrement>4</dimIncrement>
<name>CCBUF_DITH4_MODE[%s]</name>
<description>Compare and Capture Buffer</description>
<alternateRegister>CCBUF[%s]</alternateRegister>
<addressOffset>0x70</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>CCBUF</name>
<description>Channel Compare/Capture Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DITHERBUF</name>
<description>Dithering Buffer Cycle Number</description>
<bitOffset>4</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<dim>6</dim>
<dimIncrement>4</dimIncrement>
<name>CCBUF_DITH5_MODE[%s]</name>
<description>Compare and Capture Buffer</description>
<alternateRegister>CCBUF[%s]</alternateRegister>
<addressOffset>0x70</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DITHERBUF</name>
<description>Dithering Buffer Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>CCBUF</name>
<description>Channel Compare/Capture Buffer Value</description>
<bitOffset>5</bitOffset>
<bitWidth>19</bitWidth>
</field>
</fields>
</register>
<register>
<dim>6</dim>
<dimIncrement>4</dimIncrement>
<name>CCBUF_DITH6_MODE[%s]</name>
<description>Compare and Capture Buffer</description>
<alternateRegister>CCBUF[%s]</alternateRegister>
<addressOffset>0x70</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DITHERBUF</name>
<description>Dithering Buffer Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>CCBUF</name>
<description>Channel Compare/Capture Buffer Value</description>
<bitOffset>6</bitOffset>
<bitWidth>18</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="TCC0">
<name>TCC1</name>
<baseAddress>0x41018000</baseAddress>
<interrupt>
<name>TCC1_OTHER</name>
<value>92</value>
</interrupt>
<interrupt>
<name>TCC1_MC0</name>
<value>93</value>
</interrupt>
<interrupt>
<name>TCC1_MC1</name>
<value>94</value>
</interrupt>
<interrupt>
<name>TCC1_MC2</name>
<value>95</value>
</interrupt>
<interrupt>
<name>TCC1_MC3</name>
<value>96</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="TCC0">
<name>TCC2</name>
<baseAddress>0x42000C00</baseAddress>
<interrupt>
<name>TCC2_OTHER</name>
<value>97</value>
</interrupt>
<interrupt>
<name>TCC2_MC0</name>
<value>98</value>
</interrupt>
<interrupt>
<name>TCC2_MC1</name>
<value>99</value>
</interrupt>
<interrupt>
<name>TCC2_MC2</name>
<value>100</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="TCC0">
<name>TCC3</name>
<baseAddress>0x42001000</baseAddress>
<interrupt>
<name>TCC3_OTHER</name>
<value>101</value>
</interrupt>
<interrupt>
<name>TCC3_MC0</name>
<value>102</value>
</interrupt>
<interrupt>
<name>TCC3_MC1</name>
<value>103</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="TCC0">
<name>TCC4</name>
<baseAddress>0x43001000</baseAddress>
<interrupt>
<name>TCC4_OTHER</name>
<value>104</value>
</interrupt>
<interrupt>
<name>TCC4_MC0</name>
<value>105</value>
</interrupt>
<interrupt>
<name>TCC4_MC1</name>
<value>106</value>
</interrupt>
</peripheral>
<peripheral>
<name>TRNG</name>
<version>U22421.1.0</version>
<description>True Random Generator</description>
<groupName>TRNG</groupName>
<prependToName>TRNG_</prependToName>
<baseAddress>0x42002800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x24</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TRNG</name>
<value>131</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DATARDYEO</name>
<description>Data Ready Event Output</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DATARDY</name>
<description>Data Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x9</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DATARDY</name>
<description>Data Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0xA</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DATARDY</name>
<description>Data Ready Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>Output Data</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DATA</name>
<description>Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>USB</name>
<version>U22221.2.0</version>
<description>Universal Serial Bus</description>
<groupName>USB</groupName>
<prependToName>USB_</prependToName>
<baseAddress>0x41000000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>USB_OTHER</name>
<value>80</value>
</interrupt>
<interrupt>
<name>USB_SOF_HSOF</name>
<value>81</value>
</interrupt>
<interrupt>
<name>USB_TRCPT0</name>
<value>82</value>
</interrupt>
<interrupt>
<name>USB_TRCPT1</name>
<value>83</value>
</interrupt>
<registers>
<cluster>
<name>DEVICE</name>
<description>USB is Device</description>
<headerStructName>UsbDevice</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>DEVICE</name>
<description>Device Mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>HOST</name>
<description>Host Mode</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x2</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>QOSCTRL</name>
<description>USB Quality Of Service</description>
<addressOffset>0x3</addressOffset>
<size>8</size>
<resetValue>0x0F</resetValue>
<fields>
<field>
<name>CQOS</name>
<description>Configuration Quality of Service</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DQOS</name>
<description>Data Quality of Service</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>DEVICE Control B</description>
<addressOffset>0x8</addressOffset>
<size>16</size>
<resetValue>0x0001</resetValue>
<fields>
<field>
<name>DETACH</name>
<description>Detach</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPDCONF</name>
<description>Speed Configuration</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SPDCONFSelect</name>
<enumeratedValue>
<name>FS</name>
<description>FS : Full Speed</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LS</name>
<description>LS : Low Speed</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>HS</name>
<description>HS : High Speed capable</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>HSTM</name>
<description>HSTM: High Speed Test Mode (force high-speed mode for test mode)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NREPLY</name>
<description>No Reply</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTJ</name>
<description>Test mode J</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTK</name>
<description>Test mode K</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTPCKT</name>
<description>Test packet mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPMODE2</name>
<description>Specific Operational Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GNAK</name>
<description>Global NAK</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMHDSK</name>
<description>Link Power Management Handshake</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>LPMHDSKSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No handshake. LPM is not supported</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>ACK</name>
<description>ACK</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
<name>NYET</name>
<description>NYET</description>
<value>2</value>
</enumeratedValue>
<enumeratedValue>
<name>STALL</name>
<description>STALL</description>
<value>3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>DADD</name>
<description>DEVICE Device Address</description>
<addressOffset>0xA</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DADD</name>
<description>Device Address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ADDEN</name>
<description>Device Address Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>DEVICE Status</description>
<addressOffset>0xC</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x40</resetValue>
<fields>
<field>
<name>SPEED</name>
<description>Speed Status</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SPEEDSelect</name>
<enumeratedValue>
<name>FS</name>
<description>Full-speed mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LS</name>
<description>Low-speed mode</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>HS</name>
<description>High-speed mode</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LINESTATE</name>
<description>USB Line State Status</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>LINESTATESelect</name>
<enumeratedValue>
<name>0</name>
<description>SE0/RESET</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>FS-J or LS-K State</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2</name>
<description>FS-K or LS-J State</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>FSMSTATUS</name>
<description>Finite State Machine Status</description>
<addressOffset>0xD</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>FSMSTATE</name>
<description>Fine State Machine Status</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<enumeratedValues>
<name>FSMSTATESelect</name>
<enumeratedValue>
<name>OFF</name>
<description>OFF (L3). It corresponds to the powered-off, disconnected, and disabled state</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ON</name>
<description>ON (L0). It corresponds to the Idle and Active states</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SUSPEND</name>
<description>SUSPEND (L2)</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>SLEEP</name>
<description>SLEEP (L1)</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DNRESUME</name>
<description>DNRESUME. Down Stream Resume.</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>UPRESUME</name>
<description>UPRESUME. Up Stream Resume.</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>RESET</name>
<description>RESET. USB lines Reset.</description>
<value>0x40</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>FNUM</name>
<description>DEVICE Device Frame Number</description>
<addressOffset>0x10</addressOffset>
<size>16</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>MFNUM</name>
<description>Micro Frame Number</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>FNUM</name>
<description>Frame Number</description>
<bitOffset>3</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>FNCERR</name>
<description>Frame Number CRC Error</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>DEVICE Device Interrupt Enable Clear</description>
<addressOffset>0x14</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>SUSPEND</name>
<description>Suspend Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSOF</name>
<description>Micro Start of Frame Interrupt Enable in High Speed Mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SOF</name>
<description>Start Of Frame Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EORST</name>
<description>End of Reset Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKEUP</name>
<description>Wake Up Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EORSM</name>
<description>End Of Resume Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMACER</name>
<description>Ram Access Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMNYET</name>
<description>Link Power Management Not Yet Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMSUSP</name>
<description>Link Power Management Suspend Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>DEVICE Device Interrupt Enable Set</description>
<addressOffset>0x18</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>SUSPEND</name>
<description>Suspend Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSOF</name>
<description>Micro Start of Frame Interrupt Enable in High Speed Mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SOF</name>
<description>Start Of Frame Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EORST</name>
<description>End of Reset Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKEUP</name>
<description>Wake Up Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EORSM</name>
<description>End Of Resume Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMACER</name>
<description>Ram Access Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMNYET</name>
<description>Link Power Management Not Yet Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMSUSP</name>
<description>Link Power Management Suspend Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>DEVICE Device Interrupt Flag</description>
<addressOffset>0x1C</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>SUSPEND</name>
<description>Suspend</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSOF</name>
<description>Micro Start of Frame in High Speed Mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SOF</name>
<description>Start Of Frame</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EORST</name>
<description>End of Reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKEUP</name>
<description>Wake Up</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EORSM</name>
<description>End Of Resume</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMACER</name>
<description>Ram Access</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMNYET</name>
<description>Link Power Management Not Yet</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMSUSP</name>
<description>Link Power Management Suspend</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EPINTSMRY</name>
<description>DEVICE End Point Interrupt Summary</description>
<addressOffset>0x20</addressOffset>
<size>16</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>EPINT0</name>
<description>End Point 0 Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT1</name>
<description>End Point 1 Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT2</name>
<description>End Point 2 Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT3</name>
<description>End Point 3 Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT4</name>
<description>End Point 4 Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT5</name>
<description>End Point 5 Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT6</name>
<description>End Point 6 Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT7</name>
<description>End Point 7 Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DESCADD</name>
<description>Descriptor Address</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DESCADD</name>
<description>Descriptor Address Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>PADCAL</name>
<description>USB PAD Calibration</description>
<addressOffset>0x28</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TRANSP</name>
<description>USB Pad Transp calibration</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TRANSN</name>
<description>USB Pad Transn calibration</description>
<bitOffset>6</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TRIM</name>
<description>USB Pad Trim calibration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<cluster>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>DEVICE_ENDPOINT[%s]</name>
<description/>
<addressOffset>0x100</addressOffset>
<register>
<name>EPCFG</name>
<description>DEVICE_ENDPOINT End Point Configuration</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>EPTYPE0</name>
<description>End Point Type0</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>EPTYPE1</name>
<description>End Point Type1</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>NYETDIS</name>
<description>NYET Token Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EPSTATUSCLR</name>
<description>DEVICE_ENDPOINT End Point Pipe Status Clear</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<access>write-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DTGLOUT</name>
<description>Data Toggle OUT Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTGLIN</name>
<description>Data Toggle IN Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CURBK</name>
<description>Current Bank Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLRQ0</name>
<description>Stall 0 Request Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLRQ1</name>
<description>Stall 1 Request Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK0RDY</name>
<description>Bank 0 Ready Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK1RDY</name>
<description>Bank 1 Ready Clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EPSTATUSSET</name>
<description>DEVICE_ENDPOINT End Point Pipe Status Set</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<access>write-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DTGLOUT</name>
<description>Data Toggle OUT Set</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTGLIN</name>
<description>Data Toggle IN Set</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CURBK</name>
<description>Current Bank Set</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLRQ0</name>
<description>Stall 0 Request Set</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLRQ1</name>
<description>Stall 1 Request Set</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK0RDY</name>
<description>Bank 0 Ready Set</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK1RDY</name>
<description>Bank 1 Ready Set</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EPSTATUS</name>
<description>DEVICE_ENDPOINT End Point Pipe Status</description>
<addressOffset>0x6</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DTGLOUT</name>
<description>Data Toggle Out</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTGLIN</name>
<description>Data Toggle In</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CURBK</name>
<description>Current Bank</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLRQ0</name>
<description>Stall 0 Request</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLRQ1</name>
<description>Stall 1 Request</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK0RDY</name>
<description>Bank 0 ready</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK1RDY</name>
<description>Bank 1 ready</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EPINTFLAG</name>
<description>DEVICE_ENDPOINT End Point Interrupt Flag</description>
<addressOffset>0x7</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>TRCPT0</name>
<description>Transfer Complete 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCPT1</name>
<description>Transfer Complete 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL0</name>
<description>Error Flow 0</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL1</name>
<description>Error Flow 1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXSTP</name>
<description>Received Setup</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL0</name>
<description>Stall 0 In/out</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL1</name>
<description>Stall 1 In/out</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EPINTENCLR</name>
<description>DEVICE_ENDPOINT End Point Interrupt Clear Flag</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>TRCPT0</name>
<description>Transfer Complete 0 Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCPT1</name>
<description>Transfer Complete 1 Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL0</name>
<description>Error Flow 0 Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL1</name>
<description>Error Flow 1 Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXSTP</name>
<description>Received Setup Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL0</name>
<description>Stall 0 In/Out Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL1</name>
<description>Stall 1 In/Out Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EPINTENSET</name>
<description>DEVICE_ENDPOINT End Point Interrupt Set Flag</description>
<addressOffset>0x9</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>TRCPT0</name>
<description>Transfer Complete 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCPT1</name>
<description>Transfer Complete 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL0</name>
<description>Error Flow 0 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL1</name>
<description>Error Flow 1 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXSTP</name>
<description>Received Setup Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL0</name>
<description>Stall 0 In/out Interrupt enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL1</name>
<description>Stall 1 In/out Interrupt enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster>
</cluster>
<cluster>
<name>HOST</name>
<description>USB is Host</description>
<alternateCluster>DEVICE</alternateCluster>
<headerStructName>UsbHost</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>DEVICE</name>
<description>Device Mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>HOST</name>
<description>Host Mode</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x2</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>QOSCTRL</name>
<description>USB Quality Of Service</description>
<addressOffset>0x3</addressOffset>
<size>8</size>
<resetValue>0x0F</resetValue>
<fields>
<field>
<name>CQOS</name>
<description>Configuration Quality of Service</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DQOS</name>
<description>Data Quality of Service</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>HOST Control B</description>
<addressOffset>0x8</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>RESUME</name>
<description>Send USB Resume</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPDCONF</name>
<description>Speed Configuration for Host</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SPDCONFSelect</name>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal mode: the host starts in full-speed mode and performs a high-speed reset to switch to the high speed mode if the downstream peripheral is high-speed capable.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FS</name>
<description>Full-speed: the host remains in full-speed mode whatever is the peripheral speed capability. Relevant in UTMI mode only.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AUTORESUME</name>
<description>Auto Resume Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTJ</name>
<description>Test mode J</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTK</name>
<description>Test mode K</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SOFE</name>
<description>Start of Frame Generation Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSRESET</name>
<description>Send USB Reset</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VBUSOK</name>
<description>VBUS is OK</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L1RESUME</name>
<description>Send L1 Resume</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSOFC</name>
<description>HOST Host Start Of Frame Control</description>
<addressOffset>0xA</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>FLENC</name>
<description>Frame Length Control</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FLENCE</name>
<description>Frame Length Control Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>HOST Status</description>
<addressOffset>0xC</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>SPEED</name>
<description>Speed Status</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>LINESTATE</name>
<description>USB Line State Status</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>FSMSTATUS</name>
<description>Finite State Machine Status</description>
<addressOffset>0xD</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>FSMSTATE</name>
<description>Fine State Machine Status</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<enumeratedValues>
<name>FSMSTATESelect</name>
<enumeratedValue>
<name>OFF</name>
<description>OFF (L3). It corresponds to the powered-off, disconnected, and disabled state</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ON</name>
<description>ON (L0). It corresponds to the Idle and Active states</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SUSPEND</name>
<description>SUSPEND (L2)</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>SLEEP</name>
<description>SLEEP (L1)</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DNRESUME</name>
<description>DNRESUME. Down Stream Resume.</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>UPRESUME</name>
<description>UPRESUME. Up Stream Resume.</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>RESET</name>
<description>RESET. USB lines Reset.</description>
<value>0x40</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>FNUM</name>
<description>HOST Host Frame Number</description>
<addressOffset>0x10</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>MFNUM</name>
<description>Micro Frame Number</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>FNUM</name>
<description>Frame Number</description>
<bitOffset>3</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>FLENHIGH</name>
<description>HOST Host Frame Length</description>
<addressOffset>0x12</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>FLENHIGH</name>
<description>Frame Length</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>HOST Host Interrupt Enable Clear</description>
<addressOffset>0x14</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>HSOF</name>
<description>Host Start Of Frame Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RST</name>
<description>BUS Reset Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKEUP</name>
<description>Wake Up Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DNRSM</name>
<description>DownStream to Device Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume from Device Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMACER</name>
<description>Ram Access Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCONN</name>
<description>Device Connection Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DDISC</name>
<description>Device Disconnection Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>HOST Host Interrupt Enable Set</description>
<addressOffset>0x18</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>HSOF</name>
<description>Host Start Of Frame Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RST</name>
<description>Bus Reset Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKEUP</name>
<description>Wake Up Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DNRSM</name>
<description>DownStream to the Device Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume fromthe device Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMACER</name>
<description>Ram Access Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCONN</name>
<description>Link Power Management Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DDISC</name>
<description>Device Disconnection Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>HOST Host Interrupt Flag</description>
<addressOffset>0x1C</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>HSOF</name>
<description>Host Start Of Frame</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RST</name>
<description>Bus Reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKEUP</name>
<description>Wake Up</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DNRSM</name>
<description>Downstream</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume from the Device</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMACER</name>
<description>Ram Access</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCONN</name>
<description>Device Connection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DDISC</name>
<description>Device Disconnection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PINTSMRY</name>
<description>HOST Pipe Interrupt Summary</description>
<addressOffset>0x20</addressOffset>
<size>16</size>
<access>read-only</access>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>EPINT0</name>
<description>Pipe 0 Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT1</name>
<description>Pipe 1 Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT2</name>
<description>Pipe 2 Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT3</name>
<description>Pipe 3 Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT4</name>
<description>Pipe 4 Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT5</name>
<description>Pipe 5 Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT6</name>
<description>Pipe 6 Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EPINT7</name>
<description>Pipe 7 Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DESCADD</name>
<description>Descriptor Address</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>DESCADD</name>
<description>Descriptor Address Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>PADCAL</name>
<description>USB PAD Calibration</description>
<addressOffset>0x28</addressOffset>
<size>16</size>
<resetValue>0x0000</resetValue>
<fields>
<field>
<name>TRANSP</name>
<description>USB Pad Transp calibration</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TRANSN</name>
<description>USB Pad Transn calibration</description>
<bitOffset>6</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TRIM</name>
<description>USB Pad Trim calibration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<cluster>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>HOST_PIPE[%s]</name>
<description/>
<addressOffset>0x100</addressOffset>
<register>
<name>PCFG</name>
<description>HOST_PIPE End Point Configuration</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>PTOKEN</name>
<description>Pipe Token</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>BK</name>
<description>Pipe Bank</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PTYPE</name>
<description>Pipe Type</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>BINTERVAL</name>
<description>HOST_PIPE Bus Access Period of Pipe</description>
<addressOffset>0x3</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>BITINTERVAL</name>
<description>Bit Interval</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>PSTATUSCLR</name>
<description>HOST_PIPE End Point Pipe Status Clear</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<access>write-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DTGL</name>
<description>Data Toggle clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CURBK</name>
<description>Curren Bank clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PFREEZE</name>
<description>Pipe Freeze Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK0RDY</name>
<description>Bank 0 Ready Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK1RDY</name>
<description>Bank 1 Ready Clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PSTATUSSET</name>
<description>HOST_PIPE End Point Pipe Status Set</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<access>write-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DTGL</name>
<description>Data Toggle Set</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CURBK</name>
<description>Current Bank Set</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PFREEZE</name>
<description>Pipe Freeze Set</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK0RDY</name>
<description>Bank 0 Ready Set</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK1RDY</name>
<description>Bank 1 Ready Set</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PSTATUS</name>
<description>HOST_PIPE End Point Pipe Status</description>
<addressOffset>0x6</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>DTGL</name>
<description>Data Toggle</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CURBK</name>
<description>Current Bank</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PFREEZE</name>
<description>Pipe Freeze</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK0RDY</name>
<description>Bank 0 ready</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BK1RDY</name>
<description>Bank 1 ready</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PINTFLAG</name>
<description>HOST_PIPE Pipe Interrupt Flag</description>
<addressOffset>0x7</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>TRCPT0</name>
<description>Transfer Complete 0 Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCPT1</name>
<description>Transfer Complete 1 Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL</name>
<description>Error Flow Interrupt Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERR</name>
<description>Pipe Error Interrupt Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXSTP</name>
<description>Transmit Setup Interrupt Flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>Stall Interrupt Flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PINTENCLR</name>
<description>HOST_PIPE Pipe Interrupt Flag Clear</description>
<addressOffset>0x8</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>TRCPT0</name>
<description>Transfer Complete 0 Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCPT1</name>
<description>Transfer Complete 1 Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL</name>
<description>Error Flow Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERR</name>
<description>Pipe Error Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXSTP</name>
<description>Transmit Setup Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>Stall Inetrrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PINTENSET</name>
<description>HOST_PIPE Pipe Interrupt Flag Set</description>
<addressOffset>0x9</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>TRCPT0</name>
<description>Transfer Complete 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCPT1</name>
<description>Transfer Complete 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL</name>
<description>Error Flow Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERR</name>
<description>Pipe Error Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXSTP</name>
<description>Transmit Setup Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>Stall Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster>
</cluster>
</registers>
</peripheral>
<peripheral>
<name>WDT</name>
<version>U22511.1.0</version>
<description>Watchdog Timer</description>
<groupName>WDT</groupName>
<prependToName>WDT_</prependToName>
<baseAddress>0x40002000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0xD</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>WDT</name>
<value>10</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WEN</name>
<description>Watchdog Timer Window Mode Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALWAYSON</name>
<description>Always-On</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CONFIG</name>
<description>Configuration</description>
<addressOffset>0x1</addressOffset>
<size>8</size>
<resetValue>0xBB</resetValue>
<fields>
<field>
<name>PER</name>
<description>Time-Out Period</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>PERSelect</name>
<enumeratedValue>
<name>CYC8</name>
<description>8 clock cycles</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC16</name>
<description>16 clock cycles</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC32</name>
<description>32 clock cycles</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC64</name>
<description>64 clock cycles</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC128</name>
<description>128 clock cycles</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC256</name>
<description>256 clock cycles</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC512</name>
<description>512 clock cycles</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC1024</name>
<description>1024 clock cycles</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC2048</name>
<description>2048 clock cycles</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC4096</name>
<description>4096 clock cycles</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC8192</name>
<description>8192 clock cycles</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC16384</name>
<description>16384 clock cycles</description>
<value>0xB</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WINDOW</name>
<description>Window Mode Time-Out Period</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>WINDOWSelect</name>
<enumeratedValue>
<name>CYC8</name>
<description>8 clock cycles</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC16</name>
<description>16 clock cycles</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC32</name>
<description>32 clock cycles</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC64</name>
<description>64 clock cycles</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC128</name>
<description>128 clock cycles</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC256</name>
<description>256 clock cycles</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC512</name>
<description>512 clock cycles</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC1024</name>
<description>1024 clock cycles</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC2048</name>
<description>2048 clock cycles</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC4096</name>
<description>4096 clock cycles</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC8192</name>
<description>8192 clock cycles</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC16384</name>
<description>16384 clock cycles</description>
<value>0xB</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EWCTRL</name>
<description>Early Warning Interrupt Control</description>
<addressOffset>0x2</addressOffset>
<size>8</size>
<resetValue>0x0B</resetValue>
<fields>
<field>
<name>EWOFFSET</name>
<description>Early Warning Interrupt Time Offset</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>EWOFFSETSelect</name>
<enumeratedValue>
<name>CYC8</name>
<description>8 clock cycles</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC16</name>
<description>16 clock cycles</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC32</name>
<description>32 clock cycles</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC64</name>
<description>64 clock cycles</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC128</name>
<description>128 clock cycles</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC256</name>
<description>256 clock cycles</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC512</name>
<description>512 clock cycles</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC1024</name>
<description>1024 clock cycles</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC2048</name>
<description>2048 clock cycles</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC4096</name>
<description>4096 clock cycles</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC8192</name>
<description>8192 clock cycles</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC16384</name>
<description>16384 clock cycles</description>
<value>0xB</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>EW</name>
<description>Early Warning Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>EW</name>
<description>Early Warning Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x6</addressOffset>
<size>8</size>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>EW</name>
<description>Early Warning</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WEN</name>
<description>Window Enable Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALWAYSON</name>
<description>Always-On Synchronization Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLEAR</name>
<description>Clear Synchronization Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CLEAR</name>
<description>Clear</description>
<addressOffset>0xC</addressOffset>
<size>8</size>
<access>write-only</access>
<resetValue>0x00</resetValue>
<fields>
<field>
<name>CLEAR</name>
<description>Watchdog Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>CLEARSelect</name>
<enumeratedValue>
<name>KEY</name>
<description>Clear Key</description>
<value>0xA5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>CoreDebug</name>
<description>Core Debug Register</description>
<groupName>CoreDebug</groupName>
<prependToName>CoreDebug_</prependToName>
<baseAddress>0xE000EDF0</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x10</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>DHCSR</name>
<description>Debug Halting Control and Status Register</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<fields>
<field>
<name>C_DEBUGEN</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C_HALT</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C_STEP</name>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C_MASKINTS</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C_SNAPSTALL</name>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>S_REGRDY</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>S_HALT</name>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>S_SLEEP</name>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>S_LOCKUP</name>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>S_RETIRE_ST</name>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>S_RESET_ST</name>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DBGKEY</name>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>DCRSR</name>
<description>Debug Core Register Selector Register</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>REGSEL</name>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>REGWnR</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DCRDR</name>
<description>Debug Core Register Data Register</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
</register>
<register>
<name>DEMCR</name>
<description>Debug Exception and Monitor Control Register</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<fields>
<field>
<name>VC_CORERESET</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VC_MMERR</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VC_NOCPERR</name>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VC_CHKERR</name>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VC_STATERR</name>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VC_BUSERR</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VC_INTERR</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VC_HARDERR</name>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MON_EN</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MON_PEND</name>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MON_STEP</name>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MON_REQ</name>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCENA</name>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DWT</name>
<description>Data Watchpoint and Trace Register</description>
<groupName>DWT</groupName>
<prependToName>DWT_</prependToName>
<baseAddress>0xE0001000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x5C</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CTRL</name>
<description>Control Register</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<fields>
<field>
<name>CYCCNTENA</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POSTPRESET</name>
<bitOffset>1</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>POSTINIT</name>
<bitOffset>5</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CYCTAP</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCTAP</name>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PCSAMPLENA</name>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXCTRCENA</name>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPIEVTENA</name>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXCEVTENA</name>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLEEPEVTENA</name>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSUEVTENA</name>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FOLDEVTENA</name>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CYCEVTENA</name>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NOPRFCNT</name>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NOCYCCNT</name>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NOEXTTRIG</name>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NOTRCPKT</name>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NUMCOMP</name>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CYCCNT</name>
<description>Cycle Count Register</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
</register>
<register>
<name>CPICNT</name>
<description>CPI Count Register</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<fields>
<field>
<name>CPICNT</name>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>EXCCNT</name>
<description>Exception Overhead Count Register</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<fields>
<field>
<name>EXCCNT</name>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>SLEEPCNT</name>
<description>Sleep Count Register</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<fields>
<field>
<name>SLEEPCNT</name>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>LSUCNT</name>
<description>LSU Count Register</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<fields>
<field>
<name>LSUCNT</name>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>FOLDCNT</name>
<description>Folded-instruction Count Register</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<fields>
<field>
<name>FOLDCNT</name>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>PCSR</name>
<description>Program Counter Sample Register</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>COMP0</name>
<description>Comparator Register 0</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
</register>
<register>
<name>MASK0</name>
<description>Mask Register 0</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<fields>
<field>
<name>MASK</name>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>FUNCTION0</name>
<description>Function Register 0</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<fields>
<field>
<name>FUNCTION</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EMITRANGE</name>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CYCMATCH</name>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATAVMATCH</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LNK1ENA</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATAVSIZE</name>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DATAVADDR0</name>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATAVADDR1</name>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MATCHED</name>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COMP1</name>
<description>Comparator Register 1</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
</register>
<register>
<name>MASK1</name>
<description>Mask Register 1</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<fields>
<field>
<name>MASK</name>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>FUNCTION1</name>
<description>Function Register 1</description>
<addressOffset>0x38</addressOffset>
<size>32</size>
<fields>
<field>
<name>FUNCTION</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EMITRANGE</name>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CYCMATCH</name>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATAVMATCH</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LNK1ENA</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATAVSIZE</name>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DATAVADDR0</name>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATAVADDR1</name>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MATCHED</name>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COMP2</name>
<description>Comparator Register 2</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
</register>
<register>
<name>MASK2</name>
<description>Mask Register 2</description>
<addressOffset>0x44</addressOffset>
<size>32</size>
<fields>
<field>
<name>MASK</name>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>FUNCTION2</name>
<description>Function Register 2</description>
<addressOffset>0x48</addressOffset>
<size>32</size>
<fields>
<field>
<name>FUNCTION</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EMITRANGE</name>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CYCMATCH</name>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATAVMATCH</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LNK1ENA</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATAVSIZE</name>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DATAVADDR0</name>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATAVADDR1</name>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MATCHED</name>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COMP3</name>
<description>Comparator Register 3</description>
<addressOffset>0x50</addressOffset>
<size>32</size>
</register>
<register>
<name>MASK3</name>
<description>Mask Register 3</description>
<addressOffset>0x54</addressOffset>
<size>32</size>
<fields>
<field>
<name>MASK</name>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
<register>
<name>FUNCTION3</name>
<description>Function Register 3</description>
<addressOffset>0x58</addressOffset>
<size>32</size>
<fields>
<field>
<name>FUNCTION</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>EMITRANGE</name>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CYCMATCH</name>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATAVMATCH</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LNK1ENA</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DATAVSIZE</name>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DATAVADDR0</name>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DATAVADDR1</name>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MATCHED</name>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>ETM</name>
<description>Embedded Trace Macrocell</description>
<groupName>ETM</groupName>
<prependToName>ETM_</prependToName>
<baseAddress>0xE0041000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x1000</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CR</name>
<description>ETM Main Control Register</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x00000411</resetValue>
<fields>
<field>
<name>ETMPD</name>
<description>ETM Power Down</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PORTSIZE</name>
<description>Port Size bits 2:0</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>STALL</name>
<description>Stall Processor</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BROUT</name>
<description>Branch Output</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBGRQ</name>
<description>Debug Request Control</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PROG</name>
<description>ETM Programming</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PORTSEL</name>
<description>ETM Port Select</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PORTMODE2</name>
<description>Port Mode bit 2</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PORTMODE</name>
<description>Port Mode bits 1:0</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PORTSIZE3</name>
<description>Port Size bit 3</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSEN</name>
<description>TimeStamp Enable</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CCR</name>
<description>ETM Configuration Code Register</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x8C802000</resetValue>
</register>
<register>
<name>TRIGGER</name>
<description>ETM Trigger Event Register</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
</register>
<register>
<name>SR</name>
<description>ETM Status Register</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
</register>
<register>
<name>SCR</name>
<description>ETM System Configuration Register</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00020D09</resetValue>
</register>
<register>
<name>TEEVR</name>
<description>ETM TraceEnable Event Register</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
</register>
<register>
<name>TECR1</name>
<description>ETM TraceEnable Control 1 Register</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
</register>
<register>
<name>FFLR</name>
<description>ETM FIFO Full Level Register</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
</register>
<register>
<name>CNTRLDVR1</name>
<description>ETM Free-running Counter Reload Value</description>
<addressOffset>0x140</addressOffset>
<size>32</size>
</register>
<register>
<name>SYNCFR</name>
<description>ETM Synchronization Frequency Register</description>
<addressOffset>0x1E0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000400</resetValue>
</register>
<register>
<name>IDR</name>
<description>ETM ID Register</description>
<addressOffset>0x1E4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x4114F250</resetValue>
</register>
<register>
<name>CCER</name>
<description>ETM Configuration Code Extension Register</description>
<addressOffset>0x1E8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x18541800</resetValue>
</register>
<register>
<name>TESSEICR</name>
<description>ETM TraceEnable Start/Stop EmbeddedICE Control Register</description>
<addressOffset>0x1F0</addressOffset>
<size>32</size>
</register>
<register>
<name>TSEVT</name>
<description>ETM TimeStamp Event Register</description>
<addressOffset>0x1F8</addressOffset>
<size>32</size>
</register>
<register>
<name>TRACEIDR</name>
<description>ETM CoreSight Trace ID Register</description>
<addressOffset>0x200</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>IDR2</name>
<description>ETM ID Register 2</description>
<addressOffset>0x208</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>PDSR</name>
<description>ETM Device Power-Down Status Register</description>
<addressOffset>0x314</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000001</resetValue>
</register>
<register>
<name>ITMISCIN</name>
<description>ETM Integration Test Miscellaneous Inputs</description>
<addressOffset>0xEE0</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>ITTRIGOUT</name>
<description>ETM Integration Test Trigger Out</description>
<addressOffset>0xEE8</addressOffset>
<size>32</size>
<access>write-only</access>
</register>
<register>
<name>ITATBCTR2</name>
<description>ETM Integration Test ATB Control 2</description>
<addressOffset>0xEF0</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>ITATBCTR0</name>
<description>ETM Integration Test ATB Control 0</description>
<addressOffset>0xEF8</addressOffset>
<size>32</size>
<access>write-only</access>
</register>
<register>
<name>ITCTRL</name>
<description>ETM Integration Mode Control Register</description>
<addressOffset>0xF00</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>INTEGRATION</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CLAIMSET</name>
<description>ETM Claim Tag Set Register</description>
<addressOffset>0xFA0</addressOffset>
<size>32</size>
</register>
<register>
<name>CLAIMCLR</name>
<description>ETM Claim Tag Clear Register</description>
<addressOffset>0xFA4</addressOffset>
<size>32</size>
</register>
<register>
<name>LAR</name>
<description>ETM Lock Access Register</description>
<addressOffset>0xFB0</addressOffset>
<size>32</size>
<access>write-only</access>
</register>
<register>
<name>LSR</name>
<description>ETM Lock Status Register</description>
<addressOffset>0xFB4</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>Present</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>Access</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ByteAcc</name>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>AUTHSTATUS</name>
<description>ETM Authentication Status Register</description>
<addressOffset>0xFB8</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>DEVTYPE</name>
<description>ETM CoreSight Device Type Register</description>
<addressOffset>0xFCC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000013</resetValue>
</register>
<register>
<name>PIDR4</name>
<description>ETM Peripheral Identification Register #4</description>
<addressOffset>0xFD0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000004</resetValue>
</register>
<register>
<name>PIDR5</name>
<description>ETM Peripheral Identification Register #5</description>
<addressOffset>0xFD4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>PIDR6</name>
<description>ETM Peripheral Identification Register #6</description>
<addressOffset>0xFD8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>PIDR7</name>
<description>ETM Peripheral Identification Register #7</description>
<addressOffset>0xFDC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>PIDR0</name>
<description>ETM Peripheral Identification Register #0</description>
<addressOffset>0xFE0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000025</resetValue>
</register>
<register>
<name>PIDR1</name>
<description>ETM Peripheral Identification Register #1</description>
<addressOffset>0xFE4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000B9</resetValue>
</register>
<register>
<name>PIDR2</name>
<description>ETM Peripheral Identification Register #2</description>
<addressOffset>0xFE8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0000000B</resetValue>
</register>
<register>
<name>PIDR3</name>
<description>ETM Peripheral Identification Register #3</description>
<addressOffset>0xFEC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000000</resetValue>
</register>
<register>
<name>CIDR0</name>
<description>ETM Component Identification Register #0</description>
<addressOffset>0xFF0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0000000D</resetValue>
</register>
<register>
<name>CIDR1</name>
<description>ETM Component Identification Register #1</description>
<addressOffset>0xFF4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000090</resetValue>
</register>
<register>
<name>CIDR2</name>
<description>ETM Component Identification Register #2</description>
<addressOffset>0xFF8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000005</resetValue>
</register>
<register>
<name>CIDR3</name>
<description>ETM Component Identification Register #3</description>
<addressOffset>0xFFC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000B1</resetValue>
</register>
</registers>
</peripheral>
<peripheral>
<name>FPU</name>
<description>Floating Point Unit</description>
<groupName>FPU</groupName>
<prependToName>FPU_</prependToName>
<baseAddress>0xE000EF30</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x18</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>FPCCR</name>
<description>Floating-Point Context Control Register</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<resetValue>0xC0000000</resetValue>
<fields>
<field>
<name>LSPACT</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USER</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>THREAD</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HFRDY</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MMRDY</name>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BFRDY</name>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MONRDY</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSPEN</name>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ASPEN</name>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FPCAR</name>
<description>Floating-Point Context Address Register</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<fields>
<field>
<name>ADDRESS</name>
<description>Address for FP registers in exception stack frame</description>
<bitOffset>3</bitOffset>
<bitWidth>29</bitWidth>
</field>
</fields>
</register>
<register>
<name>FPDSCR</name>
<description>Floating-Point Default Status Control Register</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>RMODE</name>
<description>Default value for FPSCR.RMODE</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>RMODESelect</name>
<enumeratedValue>
<name>RN</name>
<description>Round to Nearest</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RP</name>
<description>Round towards Positive Infinity</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RM</name>
<description>Round towards Negative Infinity</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>RZ</name>
<description>Round towards Zero</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FZ</name>
<description>Default value for FPSCR.FZ</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DN</name>
<description>Default value for FPSCR.DN</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AHP</name>
<description>Default value for FPSCR.AHP</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MVFR0</name>
<description>Media and FP Feature Register 0</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>A_SIMD_registers</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>Single_precision</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>Double_precision</name>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FP_excep_trapping</name>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>Divide</name>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>Square_root</name>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>Short_vectors</name>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FP_rounding_modes</name>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>MVFR1</name>
<description>Media and FP Feature Register 1</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>FtZ_mode</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>D_NaN_mode</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FP_HPFP</name>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FP_fused_MAC</name>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>ITM</name>
<description>Instrumentation Trace Macrocell</description>
<groupName>ITM</groupName>
<prependToName>ITM_</prependToName>
<baseAddress>0xE0000000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0xF00</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<dim>32</dim>
<dimIncrement>4</dimIncrement>
<name>PORT_WORD_MODE[%s]</name>
<description>ITM Stimulus Port Registers</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>PORT</name>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>32</dim>
<dimIncrement>4</dimIncrement>
<name>PORT_BYTE_MODE[%s]</name>
<description>ITM Stimulus Port Registers</description>
<alternateRegister>PORT_WORD_MODE[%s]</alternateRegister>
<addressOffset>0x0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>PORT</name>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<dim>32</dim>
<dimIncrement>4</dimIncrement>
<name>PORT_HWORD_MODE[%s]</name>
<description>ITM Stimulus Port Registers</description>
<alternateRegister>PORT_WORD_MODE[%s]</alternateRegister>
<addressOffset>0x0</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>PORT</name>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>TER</name>
<description>ITM Trace Enable Register</description>
<addressOffset>0xE00</addressOffset>
<size>32</size>
</register>
<register>
<name>TPR</name>
<description>ITM Trace Privilege Register</description>
<addressOffset>0xE40</addressOffset>
<size>32</size>
<fields>
<field>
<name>PRIVMASK</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>TCR</name>
<description>ITM Trace Control Register</description>
<addressOffset>0xE80</addressOffset>
<size>32</size>
<fields>
<field>
<name>ITMENA</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSENA</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYNCENA</name>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DWTENA</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWOENA</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALLENA</name>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSPrescale</name>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>GTSFREQ</name>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TraceBusID</name>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>BUSY</name>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IWR</name>
<description>ITM Integration Write Register</description>
<addressOffset>0xEF8</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>ATVALIDM</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>IRR</name>
<description>ITM Integration Read Register</description>
<addressOffset>0xEFC</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>ATREADYM</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>MPU</name>
<description>Memory Protection Unit</description>
<groupName>MPU</groupName>
<prependToName>MPU_</prependToName>
<baseAddress>0xE000ED90</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x2C</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>TYPE</name>
<description>MPU Type Register</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SEPARATE</name>
<description>Separate instruction and Data Memory MapsRegions</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DREGION</name>
<description>Number of Data Regions</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>IREGION</name>
<description>Number of Instruction Regions</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRL</name>
<description>MPU Control Register</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<fields>
<field>
<name>ENABLE</name>
<description>MPU Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HFNMIENA</name>
<description>Enable Hard Fault and NMI handlers</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRIVDEFENA</name>
<description>Enables privileged software access to default memory map</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RNR</name>
<description>MPU Region Number Register</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<fields>
<field>
<name>REGION</name>
<description>Region referenced by RBAR and RASR</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>RBAR</name>
<description>MPU Region Base Address Register</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<fields>
<field>
<name>REGION</name>
<description>Region number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>VALID</name>
<description>Region number valid</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDR</name>
<description>Region base address</description>
<bitOffset>5</bitOffset>
<bitWidth>27</bitWidth>
</field>
</fields>
</register>
<register>
<name>RASR</name>
<description>MPU Region Attribute and Size Register</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<fields>
<field>
<name>ENABLE</name>
<description>Region Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SIZE</name>
<description>Region Size</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRD</name>
<description>Sub-region disable</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>B</name>
<description>Bufferable bit</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C</name>
<description>Cacheable bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>S</name>
<description>Shareable bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEX</name>
<description>TEX bit</description>
<bitOffset>19</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>AP</name>
<description>Access Permission</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>XN</name>
<description>Execute Never Attribute</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RBAR_A1</name>
<description>MPU Alias 1 Region Base Address Register</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<fields>
<field>
<name>REGION</name>
<description>Region number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>VALID</name>
<description>Region number valid</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDR</name>
<description>Region base address</description>
<bitOffset>5</bitOffset>
<bitWidth>27</bitWidth>
</field>
</fields>
</register>
<register>
<name>RASR_A1</name>
<description>MPU Alias 1 Region Attribute and Size Register</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<fields>
<field>
<name>ENABLE</name>
<description>Region Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SIZE</name>
<description>Region Size</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRD</name>
<description>Sub-region disable</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>B</name>
<description>Bufferable bit</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C</name>
<description>Cacheable bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>S</name>
<description>Shareable bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEX</name>
<description>TEX bit</description>
<bitOffset>19</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>AP</name>
<description>Access Permission</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>XN</name>
<description>Execute Never Attribute</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RBAR_A2</name>
<description>MPU Alias 2 Region Base Address Register</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<fields>
<field>
<name>REGION</name>
<description>Region number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>VALID</name>
<description>Region number valid</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDR</name>
<description>Region base address</description>
<bitOffset>5</bitOffset>
<bitWidth>27</bitWidth>
</field>
</fields>
</register>
<register>
<name>RASR_A2</name>
<description>MPU Alias 2 Region Attribute and Size Register</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<fields>
<field>
<name>ENABLE</name>
<description>Region Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SIZE</name>
<description>Region Size</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRD</name>
<description>Sub-region disable</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>B</name>
<description>Bufferable bit</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C</name>
<description>Cacheable bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>S</name>
<description>Shareable bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEX</name>
<description>TEX bit</description>
<bitOffset>19</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>AP</name>
<description>Access Permission</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>XN</name>
<description>Execute Never Attribute</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RBAR_A3</name>
<description>MPU Alias 3 Region Base Address Register</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<fields>
<field>
<name>REGION</name>
<description>Region number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>VALID</name>
<description>Region number valid</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDR</name>
<description>Region base address</description>
<bitOffset>5</bitOffset>
<bitWidth>27</bitWidth>
</field>
</fields>
</register>
<register>
<name>RASR_A3</name>
<description>MPU Alias 3 Region Attribute and Size Register</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<fields>
<field>
<name>ENABLE</name>
<description>Region Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SIZE</name>
<description>Region Size</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SRD</name>
<description>Sub-region disable</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>B</name>
<description>Bufferable bit</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>C</name>
<description>Cacheable bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>S</name>
<description>Shareable bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TEX</name>
<description>TEX bit</description>
<bitOffset>19</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>AP</name>
<description>Access Permission</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>XN</name>
<description>Execute Never Attribute</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>NVIC</name>
<description>Nested Vectored Interrupt Controller</description>
<groupName>NVIC</groupName>
<prependToName>NVIC_</prependToName>
<baseAddress>0xE000E100</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0xE04</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<dim>5</dim>
<dimIncrement>4</dimIncrement>
<name>ISER[%s]</name>
<description>Interrupt Set Enable Register</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0</resetValue>
<fields>
<field>
<name>SETENA</name>
<description>Interrupt set enable bits</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>5</dim>
<dimIncrement>4</dimIncrement>
<name>ICER[%s]</name>
<description>Interrupt Clear Enable Register</description>
<addressOffset>0x80</addressOffset>
<size>32</size>
<resetValue>0</resetValue>
<fields>
<field>
<name>CLRENA</name>
<description>Interrupt clear-enable bits</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>5</dim>
<dimIncrement>4</dimIncrement>
<name>ISPR[%s]</name>
<description>Interrupt Set Pending Register</description>
<addressOffset>0x100</addressOffset>
<size>32</size>
<resetValue>0</resetValue>
<fields>
<field>
<name>SETPEND</name>
<description>Interrupt set-pending bits</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>5</dim>
<dimIncrement>4</dimIncrement>
<name>ICPR[%s]</name>
<description>Interrupt Clear Pending Register</description>
<addressOffset>0x180</addressOffset>
<size>32</size>
<resetValue>0</resetValue>
<fields>
<field>
<name>CLRPEND</name>
<description>Interrupt clear-pending bits</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>5</dim>
<dimIncrement>4</dimIncrement>
<name>IABR[%s]</name>
<description>Interrupt Active Bit Register</description>
<addressOffset>0x200</addressOffset>
<size>32</size>
<resetValue>0</resetValue>
<fields>
<field>
<name>ACTIVE</name>
<description>Interrupt active bits</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>35</dim>
<dimIncrement>1</dimIncrement>
<name>IP[%s]</name>
<description>Interrupt Priority Register n</description>
<addressOffset>0x300</addressOffset>
<size>8</size>
<resetValue>0</resetValue>
<fields>
<field>
<name>PRI0</name>
<description>Priority of interrupt n</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>STIR</name>
<description>Software Trigger Interrupt Register</description>
<addressOffset>0xE00</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>INTID</name>
<description>Interrupt ID to trigger</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SysTick</name>
<description>System timer</description>
<groupName>SysTick</groupName>
<prependToName>SysTick_</prependToName>
<baseAddress>0xE000E010</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x10</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CSR</name>
<description>SysTick Control and Status Register</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<resetValue>0x4</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>SysTick Counter Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ENABLESelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>Counter disabled</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Counter enabled</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TICKINT</name>
<description>SysTick Exception Request Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>TICKINTSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>Counting down to 0 does not assert the SysTick exception request</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Counting down to 0 asserts the SysTick exception request</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKSOURCE</name>
<description>Clock Source 0=external, 1=processor</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>CLKSOURCESelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>External clock</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Processor clock</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>COUNTFLAG</name>
<description>Timer counted to 0 since last read of register</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>RVR</name>
<description>SysTick Reload Value Register</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<fields>
<field>
<name>RELOAD</name>
<description>Value to load into the SysTick Current Value Register when the counter reaches 0</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>CVR</name>
<description>SysTick Current Value Register</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<fields>
<field>
<name>CURRENT</name>
<description>Current value at the time the register is accessed</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>CALIB</name>
<description>SysTick Calibration Value Register</description>
<addressOffset>0xC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0</resetValue>
<fields>
<field>
<name>TENMS</name>
<description>Reload value to use for 10ms timing</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
<field>
<name>SKEW</name>
<description>TENMS is rounded from non-integer ratio</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SKEWSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>10ms calibration value is exact</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>10ms calibration value is inexact, because of the clock frequency</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NOREF</name>
<description>No Separate Reference Clock</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>NOREFSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>The reference clock is provided</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>The reference clock is not provided</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>SystemControl</name>
<description>System Control Registers</description>
<groupName>SystemControl</groupName>
<prependToName>SystemControl_</prependToName>
<baseAddress>0xE000E000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0xD8C</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>ICTR</name>
<description>Interrupt Controller Type Register</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>INTLINESNUM</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>ACTLR</name>
<description>Auxiliary Control Register</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<fields>
<field>
<name>DISMCYCINT</name>
<description>Disable interruption of LDM/STM instructions</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DISDEFWBUF</name>
<description>Disable wruite buffer use during default memory map accesses</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DISFOLD</name>
<description>Disable IT folding</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DISFPCA</name>
<description>Disable automatic update of CONTROL.FPCA</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DISOOFP</name>
<description>Disable out-of-order FP instructions</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPUID</name>
<description>CPUID Base Register</description>
<addressOffset>0xD00</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x410FC240</resetValue>
<fields>
<field>
<name>REVISION</name>
<description>Processor revision number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PARTNO</name>
<description>Process Part Number, 0xC24=Cortex-M4</description>
<bitOffset>4</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>CONSTANT</name>
<description>Constant</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>VARIANT</name>
<description>Variant number</description>
<bitOffset>20</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>IMPLEMENTER</name>
<description>Implementer code, 0x41=ARM</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>ICSR</name>
<description>Interrupt Control and State Register</description>
<addressOffset>0xD04</addressOffset>
<size>32</size>
<resetValue>0</resetValue>
<fields>
<field>
<name>VECTACTIVE</name>
<description>Active exception number</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
<field>
<name>RETTOBASE</name>
<description>No preempted active exceptions to execute</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VECTPENDING</name>
<description>Exception number of the highest priority pending enabled exception</description>
<bitOffset>12</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>ISRPENDING</name>
<description>Interrupt pending flag</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ISRPREEMPT</name>
<description>Debug only</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDSTCLR</name>
<description>SysTick clear-pending bit</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>PENDSTCLRSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>No effect</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Removes the pending state from the SysTick exception</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PENDSTSET</name>
<description>SysTick set-pending bit</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>PENDSTSETSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>Write: no effect; read: SysTick exception is not pending</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Write: changes SysTick exception state to pending; read: SysTick exception is pending</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PENDSVCLR</name>
<description>PendSV clear-pending bit</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>PENDSVCLRSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>No effect</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Removes the pending state from the PendSV exception</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PENDSVSET</name>
<description>PendSV set-pending bit</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>PENDSVSETSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>Write: no effect; read: PendSV exception is not pending</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Write: changes PendSV exception state to pending; read: PendSV exception is pending</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NMIPENDSET</name>
<description>NMI set-pending bit</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>NMIPENDSETSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>Write: no effect; read: NMI exception is not pending</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Write: changes NMI exception state to pending; read: NMI exception is pending</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>VTOR</name>
<description>Vector Table Offset Register</description>
<addressOffset>0xD08</addressOffset>
<size>32</size>
<resetValue>0x00000000</resetValue>
<fields>
<field>
<name>TBLOFF</name>
<description>Vector table base offset</description>
<bitOffset>7</bitOffset>
<bitWidth>25</bitWidth>
</field>
</fields>
</register>
<register>
<name>AIRCR</name>
<description>Application Interrupt and Reset Control Register</description>
<addressOffset>0xD0C</addressOffset>
<size>32</size>
<resetValue>0xFA050000</resetValue>
<fields>
<field>
<name>VECTRESET</name>
<description>Must write 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VECTCLRACTIVE</name>
<description>Must write 0</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYSRESETREQ</name>
<description>System Reset Request</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SYSRESETREQSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>No system reset request</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Asserts a signal to the outer system that requests a reset</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRIGROUP</name>
<description>Interrupt priority grouping</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>ENDIANNESS</name>
<description>Data endianness, 0=little, 1=big</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>ENDIANNESSSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>Little-endian</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Big-endian</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>VECTKEY</name>
<description>Register key</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>SCR</name>
<description>System Control Register</description>
<addressOffset>0xD10</addressOffset>
<size>32</size>
<resetValue>0</resetValue>
<fields>
<field>
<name>SLEEPONEXIT</name>
<description>Sleep-on-exit on handler return</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SLEEPONEXITSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>Do not sleep when returning to Thread mode</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Enter sleep, or deep sleep, on return from an ISR</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SLEEPDEEP</name>
<description>Deep Sleep used as low power mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SLEEPDEEPSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>Sleep</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Deep sleep</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SEVONPEND</name>
<description>Send Event on Pending bit</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>SEVONPENDSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>Only enabled interrupts or events can wakeup the processor, disabled interrupts are excluded</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Enabled events and all interrupts, including disabled interrupts, can wakeup the processor</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CCR</name>
<description>Configuration and Control Register</description>
<addressOffset>0xD14</addressOffset>
<size>32</size>
<resetValue>0x00000200</resetValue>
<fields>
<field>
<name>NONBASETHRDENA</name>
<description>Indicates how processor enters Thread mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USERSETMPEND</name>
<description>Enables unprivileged software access to STIR register</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UNALIGN_TRP</name>
<description>Enables unaligned access traps</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>UNALIGN_TRPSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>Do not trap unaligned halfword and word accesses</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>Trap unaligned halfword and word accesses</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DIV_0_TRP</name>
<description>Enables divide by 0 trap</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BFHFNMIGN</name>
<description>Ignore LDM/STM BusFault for -1/-2 priority handlers</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STKALIGN</name>
<description>Indicates stack alignment on exception entry</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>STKALIGNSelect</name>
<enumeratedValue>
<name>VALUE_0</name>
<description>4-byte aligned</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
<name>VALUE_1</name>
<description>8-byte aligned</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SHPR1</name>
<description>System Handler Priority Register 1</description>
<addressOffset>0xD18</addressOffset>
<size>32</size>
<fields>
<field>
<name>PRI_4</name>
<description>Priority of system handler 4, MemManage</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>PRI_5</name>
<description>Priority of system handler 5, BusFault</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>PRI_6</name>
<description>Priority of system handler 6, UsageFault</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>SHPR2</name>
<description>System Handler Priority Register 2</description>
<addressOffset>0xD1C</addressOffset>
<size>32</size>
<resetValue>0</resetValue>
<fields>
<field>
<name>PRI_11</name>
<description>Priority of system handler 11, SVCall</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>SHPR3</name>
<description>System Handler Priority Register 3</description>
<addressOffset>0xD20</addressOffset>
<size>32</size>
<resetValue>0</resetValue>
<fields>
<field>
<name>PRI_14</name>
<description>Priority of system handler 14, PendSV</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>PRI_15</name>
<description>Priority of system handler 15, SysTick exception</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>SHCSR</name>
<description>System Handler Control and State Register</description>
<addressOffset>0xD24</addressOffset>
<size>32</size>
<fields>
<field>
<name>MEMFAULTACT</name>
<description>MemManage exception active bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSFAULTACT</name>
<description>BusFault exception active bit</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USGFAULTACT</name>
<description>UsageFault exception active bit</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SVCALLACT</name>
<description>SVCall active bit</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MONITORACT</name>
<description>DebugMonitor exception active bit</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PENDSVACT</name>
<description>PendSV exception active bit</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYSTICKACT</name>
<description>SysTick exception active bit</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USGFAULTPENDED</name>
<description>UsageFault exception pending bit</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MEMFAULTPENDED</name>
<description>MemManage exception pending bit</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSFAULTPENDED</name>
<description>BusFault exception pending bit</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SVCALLPENDED</name>
<description>SVCall pending bit</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MEMFAULTENA</name>
<description>MemManage enable bit</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSFAULTENA</name>
<description>BusFault enable bit</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USGFAULTENA</name>
<description>UsageFault enable bit</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CFSR</name>
<description>Configurable Fault Status Register</description>
<addressOffset>0xD28</addressOffset>
<size>32</size>
<fields>
<field>
<name>IACCVIOL</name>
<description>Instruction access violation</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DACCVIOL</name>
<description>Data access violation</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUNSTKERR</name>
<description>MemManage Fault on unstacking for exception return</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSTKERR</name>
<description>MemManage Fault on stacking for exception entry</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MLSPERR</name>
<description>MemManager Fault occured during FP lazy state preservation</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MMARVALID</name>
<description>MemManage Fault Address Register valid</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IBUSERR</name>
<description>Instruction bus error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRECISERR</name>
<description>Precise data bus error</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IMPRECISERR</name>
<description>Imprecise data bus error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UNSTKERR</name>
<description>BusFault on unstacking for exception return</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STKERR</name>
<description>BusFault on stacking for exception entry</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LSPERR</name>
<description>BusFault occured during FP lazy state preservation</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BFARVALID</name>
<description>BusFault Address Register valid</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UNDEFINSTR</name>
<description>Undefined instruction UsageFault</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVSTATE</name>
<description>Invalid state UsageFault</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVPC</name>
<description>Invalid PC load UsageFault</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NOCP</name>
<description>No coprocessor UsageFault</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UNALIGNED</name>
<description>Unaligned access UsageFault</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIVBYZERO</name>
<description>Divide by zero UsageFault</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HFSR</name>
<description>HardFault Status Register</description>
<addressOffset>0xD2C</addressOffset>
<size>32</size>
<fields>
<field>
<name>VECTTBL</name>
<description>BusFault on a Vector Table read during exception processing</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FORCED</name>
<description>Forced Hard Fault</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DEBUGEVT</name>
<description>Debug: always write 0</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFSR</name>
<description>Debug Fault Status Register</description>
<addressOffset>0xD30</addressOffset>
<size>32</size>
<fields>
<field>
<name>HALTED</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BKPT</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DWTTRAP</name>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VCATCH</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXTERNAL</name>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>MMFAR</name>
<description>MemManage Fault Address Register</description>
<addressOffset>0xD34</addressOffset>
<size>32</size>
<fields>
<field>
<name>ADDRESS</name>
<description>Address that generated the MemManage fault</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>BFAR</name>
<description>BusFault Address Register</description>
<addressOffset>0xD38</addressOffset>
<size>32</size>
<fields>
<field>
<name>ADDRESS</name>
<description>Address that generated the BusFault</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>AFSR</name>
<description>Auxiliary Fault Status Register</description>
<addressOffset>0xD3C</addressOffset>
<size>32</size>
<fields>
<field>
<name>IMPDEF</name>
<description>AUXFAULT input signals</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>4</dimIncrement>
<name>PFR[%s]</name>
<description>Processor Feature Register</description>
<addressOffset>0xD40</addressOffset>
<size>32</size>
</register>
<register>
<name>DFR</name>
<description>Debug Feature Register</description>
<addressOffset>0xD48</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>ADR</name>
<description>Auxiliary Feature Register</description>
<addressOffset>0xD4C</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<dim>4</dim>
<dimIncrement>4</dimIncrement>
<name>MMFR[%s]</name>
<description>Memory Model Feature Register</description>
<addressOffset>0xD50</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<dim>5</dim>
<dimIncrement>4</dimIncrement>
<name>ISAR[%s]</name>
<description>Instruction Set Attributes Register</description>
<addressOffset>0xD60</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>CPACR</name>
<description>Coprocessor Access Control Register</description>
<addressOffset>0xD88</addressOffset>
<size>32</size>
<fields>
<field>
<name>CP10</name>
<description>Access privileges for coprocessor 10</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CP10Select</name>
<enumeratedValue>
<name>DENIED</name>
<description>Access denied</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRIV</name>
<description>Privileged access only</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FULL</name>
<description>Full access</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CP11</name>
<description>Access privileges for coprocessor 11</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CP11Select</name>
<enumeratedValue>
<name>DENIED</name>
<description>Access denied</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRIV</name>
<description>Privileged access only</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FULL</name>
<description>Full access</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TPI</name>
<description>Trace Port Interface Register</description>
<groupName>TPI</groupName>
<prependToName>TPI_</prependToName>
<baseAddress>0xE0040000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0xFD0</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>SSPSR</name>
<description>Supported Parallel Port Size Register</description>
<addressOffset>0x0</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>CSPSR</name>
<description>Current Parallel Port Size Register</description>
<addressOffset>0x4</addressOffset>
<size>32</size>
</register>
<register>
<name>ACPR</name>
<description>Asynchronous Clock Prescaler Register</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<fields>
<field>
<name>PRESCALER</name>
<bitOffset>0</bitOffset>
<bitWidth>13</bitWidth>
</field>
</fields>
</register>
<register>
<name>SPPR</name>
<description>Selected Pin Protocol Register</description>
<addressOffset>0xF0</addressOffset>
<size>32</size>
<fields>
<field>
<name>TXMODE</name>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>FFSR</name>
<description>Formatter and Flush Status Register</description>
<addressOffset>0x300</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>FlInProg</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FtStopped</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCPresent</name>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FtNonStop</name>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FFCR</name>
<description>Formatter and Flush Control Register</description>
<addressOffset>0x304</addressOffset>
<size>32</size>
<fields>
<field>
<name>EnFCont</name>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TrigIn</name>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FSCR</name>
<description>Formatter Synchronization Counter Register</description>
<addressOffset>0x308</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>TRIGGER</name>
<description>TRIGGER</description>
<addressOffset>0xEE8</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>TRIGGER</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FIFO0</name>
<description>Integration ETM Data</description>
<addressOffset>0xEEC</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>ETM0</name>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>ETM1</name>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>ETM2</name>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>ETM_bytecount</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ETM_ATVALID</name>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ITM_bytecount</name>
<bitOffset>27</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ITM_ATVALID</name>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ITATBCTR2</name>
<description>ITATBCTR2</description>
<addressOffset>0xEF0</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>ATREADY</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ITATBCTR0</name>
<description>ITATBCTR0</description>
<addressOffset>0xEF8</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>ATREADY</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FIFO1</name>
<description>Integration ITM Data</description>
<addressOffset>0xEFC</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>ITM0</name>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>ITM1</name>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>ITM2</name>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>ETM_bytecount</name>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ETM_ATVALID</name>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ITM_bytecount</name>
<bitOffset>27</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ITM_ATVALID</name>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ITCTRL</name>
<description>Integration Mode Control</description>
<addressOffset>0xF00</addressOffset>
<size>32</size>
<fields>
<field>
<name>Mode</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CLAIMSET</name>
<description>Claim tag set</description>
<addressOffset>0xFA0</addressOffset>
<size>32</size>
</register>
<register>
<name>CLAIMCLR</name>
<description>Claim tag clear</description>
<addressOffset>0xFA4</addressOffset>
<size>32</size>
</register>
<register>
<name>DEVID</name>
<description>TPIU_DEVID</description>
<addressOffset>0xFC8</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>NrTraceInput</name>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AsynClkIn</name>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MinBufSz</name>
<bitOffset>6</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>PTINVALID</name>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MANCVALID</name>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRZVALID</name>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DEVTYPE</name>
<description>TPIU_DEVTYPE</description>
<addressOffset>0xFCC</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SubType</name>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>MajorType</name>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
</peripherals>
</device>