LYL/R2_NEW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

nuc协议更改，上层参数修改

Browse Source
This commit is contained in:
ZHAISHUI04 2025-07-05 02:55:37 +08:00
parent b7e4d04550
commit 6179339e82
13 changed files with 87 additions and 112 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
MDK-ARM/R2.uvoptx
View File

@ -173,32 +173,12 @@
<Ww>
<count>3</count>
<WinNumber>1</WinNumber>
<ItemText>UP,0x0A</ItemText>
<ItemText>huart-&gt;ErrorCode</ItemText>
</Ww>
<Ww>
<count>4</count>
<WinNumber>1</WinNumber>
<ItemText>chassis,0x0A</ItemText>
</Ww>
<Ww>
<count>5</count>
<WinNumber>1</WinNumber>
<ItemText>\\R2\../User/task/chassis_task.c\chassis.sick_cali.sickparam</ItemText>
</Ww>
<Ww>
<count>6</count>
<WinNumber>1</WinNumber>
<ItemText>cmd,0x0A</ItemText>
</Ww>
<Ww>
<count>7</count>
<WinNumber>1</WinNumber>
<ItemText>nucbuf,0x0A</ItemText>
</Ww>
<Ww>
<count>8</count>
<WinNumber>1</WinNumber>
<ItemText>cmd_fromnuc</ItemText>
<ItemText>UP,0x0A</ItemText>
</Ww>
</WatchWindow1>
<Tracepoint>

4
MDK-ARM/R2.uvprojx
View File

@ -17,8 +17,8 @@
<TargetCommonOption>
<Device>STM32F407IGHx</Device>
<Vendor>STMicroelectronics</Vendor>
<PackID>Keil.STM32F4xx_DFP.3.0.0</PackID>
<PackURL>https://www.keil.com/pack/</PackURL>
<PackID>Keil.STM32F4xx_DFP.2.15.0</PackID>
<PackURL>http://www.keil.com/pack/</PackURL>
<Cpu>IRAM(0x20000000-0x2001BFFF) IRAM2(0x2001C000-0x2001FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) FPU2 CPUTYPE("Cortex-M4") TZ</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>

BIN
MDK-ARM/R2/R2.axf
View File

Binary file not shown.

34
User/Module/Chassis.c
View File

@ -73,18 +73,18 @@ int8_t Chassis_init(Chassis_t *c, const Chassis_Param_t *param, float target_fre
c->sick_cali .sickparam=c->param ->sickparam ;
c->ang_cail.is_open=1;
return CHASSIS_OK;
}
fp32 pian_yaw;
void Chassis_speed_calculate(Chassis_t *c, fp32 Vx, fp32 Vy, fp32 Vw) {
fp64 Nor_Vx, Nor_Vy;
normalize_vector(Vx, Vy, &Nor_Vx, &Nor_Vy);
c->hopemotorout.OmniSpeedOut[0] = -Nor_Vx + Nor_Vy + Vw+pian_yaw; // 右前
c->hopemotorout.OmniSpeedOut[1] = -Nor_Vx - Nor_Vy + Vw+pian_yaw; // 右后
c->hopemotorout.OmniSpeedOut[2] = Nor_Vx - Nor_Vy + Vw +pian_yaw; // 左后
c->hopemotorout.OmniSpeedOut[3] = Nor_Vx + Nor_Vy + Vw +pian_yaw; // 左前
c->hopemotorout.OmniSpeedOut[0] = -Nor_Vx + Nor_Vy + Vw+c->ang_cail.out; // 右前
c->hopemotorout.OmniSpeedOut[1] = -Nor_Vx - Nor_Vy + Vw+c->ang_cail.out; // 右后
c->hopemotorout.OmniSpeedOut[2] = Nor_Vx - Nor_Vy + Vw +c->ang_cail.out; // 左后
c->hopemotorout.OmniSpeedOut[3] = Nor_Vx + Nor_Vy + Vw +c->ang_cail.out; // 左前
Chassis_AngleCompensate(c);
@ -138,8 +138,8 @@ int8_t Chassis_Control(Chassis_t *c, CMD_t *ctrl, CAN_Output_t *out) {
case AUTO:
switch (c->chassis_ctrl.mode) {
case AUTO_MID360:
c->move_vec.Vw = ctrl->cmd_MID360.posw * 1000;
c->move_vec.Vy = -ctrl->cmd_MID360.posy * 1000;
c->move_vec.Vw = -ctrl->cmd_MID360.posw * 1000;
c->move_vec.Vy = ctrl->cmd_MID360.posy * 1000;
c->move_vec.Vx = -ctrl->cmd_MID360.posx * 1000;
abs_limit_fp(&c->move_vec.Vx, 5000.0f);
abs_limit_fp(&c->move_vec.Vy, 5000.0f);
@ -147,8 +147,8 @@ int8_t Chassis_Control(Chassis_t *c, CMD_t *ctrl, CAN_Output_t *out) {
// c->NUC_send.send[0] = 1;
break;
case AUTO_MID360_Pitch:
c->move_vec.Vw = ctrl->cmd_MID360.posw * 1000;
c->move_vec.Vy = -ctrl->cmd_MID360.posy * 1000;
c->move_vec.Vw = -ctrl->cmd_MID360.posw * 1000;
c->move_vec.Vy = ctrl->cmd_MID360.posy * 1000;
c->move_vec.Vx = -ctrl->cmd_MID360.posx * 1000;
abs_limit_fp(&c->move_vec.Vx, 5000.0f);
abs_limit_fp(&c->move_vec.Vy, 5000.0f);
@ -175,8 +175,8 @@ int8_t Chassis_Control(Chassis_t *c, CMD_t *ctrl, CAN_Output_t *out) {
break ;
case PB_MID:
case PB_DOWN:
c->move_vec.Vw = ctrl->cmd_MID360.posw * 1000;
c->move_vec.Vy = -ctrl->cmd_MID360.posy * 1000;
c->move_vec.Vw = -ctrl->cmd_MID360.posw * 1000;
c->move_vec.Vy = ctrl->cmd_MID360.posy * 1000;
c->move_vec.Vx = -ctrl->cmd_MID360.posx * 1000;
abs_limit_fp(&c->move_vec.Vx, 5000.0f);
abs_limit_fp(&c->move_vec.Vy, 5000.0f);
@ -293,17 +293,21 @@ int8_t sick_calibration(Chassis_t *c, CMD_t *ctrl, CAN_Output_t *out)
int8_t Chassis_AngleCompensate(Chassis_t *c)
{
if (c == NULL) return CHASSIS_ERR_NULL;
if(c->ang_cail.is_open==0) return 0;
static fp32 pian_angel,cur_angle;
if((c->move_vec.Vx || c->move_vec.Vy) && (c->move_vec.Vw== 0))
{
pian_angel=cur_angle-AngleChange(DEGREE,c->pos088.imu_eulr.yaw);
c->ang_cail.ang_error=cur_angle-AngleChange(DEGREE,c->pos088.imu_eulr.yaw);
}
else {
cur_angle=AngleChange(DEGREE,c->pos088.imu_eulr.yaw);
pian_angel=0;
c->ang_cail.ang_cur=AngleChange(DEGREE,c->pos088.imu_eulr.yaw);
c->ang_cail.ang_error=0;
}
pian_yaw = PID_calc(&c->pid.Chassis_AngleAdjust,pian_angel,0);
c->ang_cail.out = PID_calc(&c->pid.Chassis_AngleAdjust,pian_angel,0);
}

10
User/Module/Chassis.h
View File

@ -177,6 +177,16 @@ typedef struct{
extKalman_t extKalman[3];
LowPassFilter2p_t filled[8]; /* 输出滤波器滤波器数组 */
/*角度偏转修正 */
struct{
int is_open;
fp32 ang_error;
fp32 ang_cur;
fp32 out;
}ang_cail;
struct {
fp32 sick_dis[4]; //获取到的sick激光值

2
User/Module/config.c
View File

@ -80,7 +80,7 @@ static const ConfigParam_t param ={
.go_pull_pos = -214.0f, // go上升去合并扳机，扳机位置
.go_up_speed = 12.0f, // 上升速度
.go_down_speed = 6.0f, // 下降速度
.Pitch_angle = 66, //俯仰角
.Pitch_angle = 58, //俯仰角
.go_init = -50
},
.PitchCfg = {

36
User/Module/up.c
View File

@ -182,14 +182,9 @@ int8_t UP_control(UP_t *u,CAN_Output_t *out,CMD_t *c)
/*部分数据更新*/
static int is_pitch=1;
posss=CurveChange(LowPassFilter2p_Apply(&u->filled[0],c->pos),3.4,4.2,&u->MID360Context.Curve);
// if (u->PitchContext.Curve == CURVE_58) {
// target->Pitch_angle = 58;
// } else {
// target->Pitch_angle = 66;
// }
u->vofa_send[0] = u->MID360Context.MID360Cfg.go_release_pos;
u->vofa_send[1] = u->motorfeedback.go_data.Pos;
u->vofa_send[2] = c->pos;
u->vofa_send [3] = LowPassFilter2p_Apply(&u->filled[0],c->pos);
u->vofa_send [4] =1;
switch (c->CMD_CtrlType )
{
@ -263,13 +258,23 @@ return 0;
//复用发射，
int8_t Pitch_Launch_Sequence(UP_t *u, LaunchContext_t *LaunchContext,fp32 StartPos,fp32 EndPos,CAN_Output_t *out){
/*电机位置到达判断*/
bool is_GoStartReach=is_reached(u->motorfeedback.go_data.Pos,StartPos,1.0f); //go开始位置
bool is_GoSpeedReach=is_reached(u->motorfeedback.go_data.W,0,1.0f) ; //go速度归零判断
bool is_GoEndReach =(u->motorfeedback .go_data .Pos < -209); //go去上拉钩子位置，判断到达
bool is_HookDone=(u->motorfeedback .DJmotor_feedback [4].total_angle>-10); //2006钩子放下判断
bool is_Shoot=(u->motorfeedback.DJmotor_feedback[4].total_angle<-10);//是否发射判断
switch(LaunchContext->LaunchState){
case Launch_Stop: break;
case Launch_PREPARE:
u->motor_target.go_shoot = StartPos;
if(is_reached(u->motorfeedback.go_data.Pos,StartPos,1.0f)&&
is_reached(u->motorfeedback.go_data.W,0,1.0f)){
if(is_GoStartReach&& is_GoSpeedReach){
//根据位置和速度判断是否到达初始位置
LaunchContext->LaunchState = Launch_START;
@ -278,7 +283,7 @@ int8_t Pitch_Launch_Sequence(UP_t *u, LaunchContext_t *LaunchContext,fp32 StartP
case Launch_START:
u->motor_target.go_pull_speed=LaunchContext->LaunchCfg.go_up_speed;
u->motor_target.go_shoot = u->LaunchContext.LaunchCfg.go_pull_pos;
if(u->motorfeedback .go_data .Pos < -209){ //检测go位置到达最上面，这里的检测条件可以更改
if(is_GoEndReach){ //检测go位置到达最上面，这里的检测条件可以更改
u->motor_target.Shoot_M2006_angle = u->LaunchContext.LaunchCfg.m2006_trig ;//设置2006角度，关闭
LaunchContext->LaunchState = Launch_TRIGGER;
@ -286,7 +291,7 @@ int8_t Pitch_Launch_Sequence(UP_t *u, LaunchContext_t *LaunchContext,fp32 StartP
case Launch_TRIGGER:
if( u->motorfeedback .DJmotor_feedback [4].total_angle>-1){ //当2006的总角度小于1，可以认为已经勾上,误差为1
if( is_HookDone ){ //当2006的总角度小于1，可以认为已经勾上,误差为1
u->motor_target.go_pull_speed=LaunchContext->LaunchCfg.go_down_speed;
u->motor_target.go_shoot = EndPos ;
// if(is_reached(u->motorfeedback.go_data.Pos,EndPos,1.0f))
@ -294,11 +299,10 @@ int8_t Pitch_Launch_Sequence(UP_t *u, LaunchContext_t *LaunchContext,fp32 StartP
} break;
case Launch_SHOOT_WAIT:
if(u->motorfeedback.DJmotor_feedback[4].total_angle<-1) //认为发射
if(is_Shoot) //认为发射
LaunchContext->LaunchState = Launch_DONE;
break;
case Launch_DONE:
break ;
default:break;
}
}
@ -356,7 +360,7 @@ int8_t Pass_Process(UP_t *u,CAN_Output_t *out,CMD_t *c)
PassCfg ->go_release_pos =
CurveChange(LowPassFilter2p_Apply(&u->filled[0],c->pos)+0.15,3,4,&u->PassContext.Curve);
CurveChange(LowPassFilter2p_Apply(&u->filled[0],c->pos),3,4,&u->PassContext.Curve);
switch (*state) { //遥控器按键进行状态切换
case PASS_STOP:
@ -395,7 +399,7 @@ int8_t UP_AUTO_Control(UP_t *u,CAN_Output_t *out,CMD_t *c){
LaunchContext_t *LaunchContext = &u->LaunchContext;
MID360Context_t *MID360Context=&u->MID360Context;
MID360Cfg_t *MID360Cfg = &u->MID360Context.MID360Cfg;
MID360Cfg->go_release_pos=CurveChange(LowPassFilter2p_Apply(&u->filled[0],c->pos)+0.15,3.2,4.3,&u->MID360Context.Curve);
MID360Cfg->go_release_pos=CurveChange(LowPassFilter2p_Apply(&u->filled[0],c->pos)-0.05,3.2,4.3,&u->MID360Context.Curve);
if (u->MID360Context.Curve == CURVE_58) {
target->Pitch_angle = 58;
} else {

15
User/Module/up_utils.c
View File

@ -3,17 +3,21 @@
int8_t DJ_processdata(DJmotor_feedback_t *f, fp32 ecd_to_angle)
{
int8_t cnt=0;
fp32 angle, delta;
angle = f->ecd;
// 初始化阶段，记录 offset
if (f->init_cnt < 50) {
f->orig_angle= angle;
f->last_angle = angle;
f->offset_ecd = (uint16_t)angle; // 记录初始偏移
f->orig_angle = angle - f->offset_ecd; // orig_angle 归零
f->last_angle = angle - f->offset_ecd;
f->init_cnt++;
return 0;
}
// 使用 offset 修正
angle = angle - f->offset_ecd;
delta = angle - f->last_angle;
if (delta > 4096) {
@ -23,7 +27,6 @@ int8_t DJ_processdata(DJmotor_feedback_t *f,fp32 ecd_to_angle)
}
f->last_angle = angle;
f->total_angle=(f->round_cnt*8191+(angle -f->orig_angle ))*ecd_to_angle;
}
/*go电机控制*/
@ -65,13 +68,13 @@ int8_t GO_SendData( GO_MotorData_t *go_data,GO_MotorCmd_t *go_cmd,float pos, flo
// 计算66度曲线（偏上）
// 计算66度曲线（偏上）
static float curve_66(float d) {
return 4.0310f * d * d + 8.9026f * d -139.5156;
return 3.7028f * d * d + 11.2126f * d -142.9446f;
}
// 计算58度曲线（偏下）
// 计算58度曲线（偏下）
static float curve_58(float d) {
return -1.9776f * d * d + 42.8499f * d - 204.2442f;
return 0.9242f * d * d + 19.4246f * d - 154.9055f;
}
/*

2
User/Module/up_utils.h
View File

@ -33,6 +33,8 @@ typedef struct
int32_t round_cnt;
int init_cnt;
fp32 total_angle;
uint16_t offset_ecd;
uint32_t msg_cnt;
}DJmotor_feedback_t;

3
User/device/cmd.h
View File

@ -43,7 +43,7 @@ typedef enum{
}CMD_mode_t;
typedef struct {
uint8_t status_fromnuc;
uint8_t ctrl_status; //取其中每一个二进制位用作通信
uint8_t ctrl_status;
struct
{
fp32 vx;
@ -52,6 +52,7 @@ typedef struct {
fp32 pos;
fp32 angle;
char flag;
}MID360;

29
User/device/nuc.c
View File

@ -40,33 +40,6 @@ int8_t NUC_StartReceiving()
return DEVICE_OK;
return DEVICE_ERR;
}
int8_t NUC_StartSending(fp32 *data)
{
union
{
float x[1];
char data[4];
} instance;
// for (int i = 0; i < 1; i++) {
instance.x[0] = data[0];
// }
SendBuffer[0] = 0xFC; // 帧头
SendBuffer[1] = 0x01; // 控制帧
for (int i = 2; i < 6; i++)
{
SendBuffer[i] = instance.data[i - 2];
}
SendBuffer[6] = 0xFD; // 帧尾
if (HAL_UART_Transmit_DMA(BSP_UART_GetHandle(BSP_UART_NUC),
(uint8_t *)SendBuffer,
sizeof(SendBuffer)) == HAL_OK)
return DEVICE_OK;
return DEVICE_ERR;
}
int8_t NUC_Restart(void)
{
__HAL_UART_DISABLE(BSP_UART_GetHandle(BSP_UART_NUC));
@ -179,7 +152,7 @@ int8_t NUC_HandleOffline(CMD_NUC_t *cmd, NUC_t *nuc)
if (cmd == NULL)
return DEVICE_ERR_NULL;
nuc->unc_online = false; // 设置为离线状态
// memset(cmd, 0, sizeof(*cmd));
memset(cmd, 0, sizeof(*cmd));
return 0;
}

1
User/device/nuc.h
View File

@ -51,7 +51,6 @@ typedef struct {
int8_t NUC_Init(NUC_t *nuc);
int8_t NUC_StartReceiving(void);
int8_t NUC_StartSending(fp32 *data) ;
bool_t NUC_WaitDmaCplt(void);
int8_t NUC_RawParse(CMD_NUC_t *n, NUC_t *nuc);
int8_t NUC_HandleOffline(CMD_NUC_t *cmd, NUC_t *nuc);

7
User/task/nuc_task.c
View File

@ -21,6 +21,8 @@ NUC_send_t NUC_send;
#endif
fp32 send[4]={11.0f,45.0,1.f,4.0f};
int a=0;
void Task_nuc(void *argument){
(void)argument; /**/
@ -35,9 +37,6 @@ void Task_nuc(void *argument){
{
#ifdef DEBUG
task_runtime.stack_water_mark.nuc= osThreadGetStackSpace(osThreadGetId());
task_runtime .freq.nuc = TASK_FREQ_NUC;
task_runtime.last_up_time.nuc= tick;
#endif
a++;
NUC_StartReceiving();
@ -69,7 +68,7 @@ void Task_nuc(void *argument){
}
NUC_StartSend(&nuc_raw, cmd_update);
// NUC_StartSend(&nuc_raw, cmd_update);
tick += delay_tick; /* 计算下一个唤醒时刄1ķ*/
osDelayUntil(tick);